blob: de7c4fc59fffedf8da78868f37ce6e8bc7078446 [file] [log] [blame]
/*
* Copyright (C) 2016 Marvell International Ltd.
*
* SPDX-License-Identifier: BSD-3-Clause
* https://spdx.org/licenses
*/
#ifndef A3700_CONSOLE_H
#define A3700_CONSOLE_H
/* MVEBU UART Registers */
#define UART_RX_REG 0x00
#define UART_TX_REG 0x04
#define UART_CTRL_REG 0x08
#define UART_STATUS_REG 0x0c
#define UART_BAUD_REG 0x10
#define UART_POSSR_REG 0x14
/* FIFO Control Register bits */
#define UARTFCR_FIFOMD_16450 (0 << 6)
#define UARTFCR_FIFOMD_16550 (1 << 6)
#define UARTFCR_RXTRIG_1 (0 << 6)
#define UARTFCR_RXTRIG_4 (1 << 6)
#define UARTFCR_RXTRIG_8 (2 << 6)
#define UARTFCR_RXTRIG_16 (3 << 6)
#define UARTFCR_TXTRIG_1 (0 << 4)
#define UARTFCR_TXTRIG_4 (1 << 4)
#define UARTFCR_TXTRIG_8 (2 << 4)
#define UARTFCR_TXTRIG_16 (3 << 4)
#define UARTFCR_DMAEN (1 << 3) /* Enable DMA mode */
#define UARTFCR_TXCLR (1 << 2) /* Clear contents of Tx FIFO */
#define UARTFCR_RXCLR (1 << 1) /* Clear contents of Rx FIFO */
#define UARTFCR_FIFOEN (1 << 0) /* Enable the Tx/Rx FIFO */
/* Line Control Register bits */
#define UARTLCR_DLAB (1 << 7) /* Divisor Latch Access */
#define UARTLCR_SETB (1 << 6) /* Set BREAK Condition */
#define UARTLCR_SETP (1 << 5) /* Set Parity to LCR[4] */
#define UARTLCR_EVEN (1 << 4) /* Even Parity Format */
#define UARTLCR_PAR (1 << 3) /* Parity */
#define UARTLCR_STOP (1 << 2) /* Stop Bit */
#define UARTLCR_WORDSZ_5 0 /* Word Length of 5 */
#define UARTLCR_WORDSZ_6 1 /* Word Length of 6 */
#define UARTLCR_WORDSZ_7 2 /* Word Length of 7 */
#define UARTLCR_WORDSZ_8 3 /* Word Length of 8 */
/* Line Status Register bits */
#define UARTLSR_TXFIFOFULL (1 << 11) /* Tx Fifo Full */
/* UART Control Register bits */
#define UART_CTRL_RXFIFO_RESET (1 << 14)
#define UART_CTRL_TXFIFO_RESET (1 << 15)
#define UARTLSR_TXFIFOEMPTY (1 << 6)
#endif /* A3700_CONSOLE_H */