| /* |
| * Copyright (c) 2019, ARM Limited and Contributors. All rights reserved. |
| * |
| * SPDX-License-Identifier: BSD-3-Clause |
| */ |
| |
| #include <arch.h> |
| #include <arch_helpers.h> |
| #include <drivers/arm/gicv2.h> |
| |
| #include <drivers/generic_delay_timer.h> |
| #include <drivers/console.h> |
| #include <drivers/ti/uart/uart_16550.h> |
| #include <common/bl_common.h> |
| #include <common/debug.h> |
| #include <common/desc_image_load.h> |
| #include <errno.h> |
| #include <drivers/io/io_storage.h> |
| #include <common/image_decompress.h> |
| #include <plat/common/platform.h> |
| #include <platform_def.h> |
| #include <platform_private.h> |
| #include <drivers/synopsys/dw_mmc.h> |
| #include <lib/mmio.h> |
| #include <lib/xlat_tables/xlat_tables.h> |
| |
| #include "s10_memory_controller.h" |
| #include "s10_reset_manager.h" |
| #include "s10_clock_manager.h" |
| #include "s10_handoff.h" |
| #include "s10_pinmux.h" |
| #include "aarch64/stratix10_private.h" |
| |
| const mmap_region_t plat_stratix10_mmap[] = { |
| MAP_REGION_FLAT(DRAM_BASE, DRAM_SIZE, MT_MEMORY | MT_RW | MT_NS), |
| MAP_REGION_FLAT(DEVICE1_BASE, DEVICE1_SIZE, MT_DEVICE | MT_RW | MT_NS), |
| MAP_REGION_FLAT(DEVICE2_BASE, DEVICE2_SIZE, MT_DEVICE | MT_RW | MT_NS), |
| MAP_REGION_FLAT(OCRAM_BASE, OCRAM_SIZE, |
| MT_NON_CACHEABLE | MT_RW | MT_SECURE), |
| MAP_REGION_FLAT(DEVICE3_BASE, DEVICE3_SIZE, |
| MT_DEVICE | MT_RW | MT_SECURE), |
| MAP_REGION_FLAT(MEM64_BASE, MEM64_SIZE, MT_DEVICE | MT_RW | MT_NS), |
| MAP_REGION_FLAT(DEVICE4_BASE, DEVICE4_SIZE, MT_DEVICE | MT_RW | MT_NS), |
| {0}, |
| }; |
| |
| boot_source_type boot_source; |
| |
| void bl2_el3_early_platform_setup(u_register_t x0, u_register_t x1, |
| u_register_t x2, u_register_t x4) |
| { |
| static console_16550_t console; |
| handoff reverse_handoff_ptr; |
| |
| generic_delay_timer_init(); |
| |
| if (s10_get_handoff(&reverse_handoff_ptr)) |
| return; |
| config_pinmux(&reverse_handoff_ptr); |
| boot_source = reverse_handoff_ptr.boot_source; |
| |
| config_clkmgr_handoff(&reverse_handoff_ptr); |
| enable_nonsecure_access(); |
| deassert_peripheral_reset(); |
| config_hps_hs_before_warm_reset(); |
| |
| console_16550_register(PLAT_UART0_BASE, PLAT_UART_CLOCK, PLAT_BAUDRATE, |
| &console); |
| |
| plat_delay_timer_init(); |
| init_hard_memory_controller(); |
| } |
| |
| |
| void bl2_el3_plat_arch_setup(void) |
| { |
| |
| struct mmc_device_info info; |
| const mmap_region_t bl_regions[] = { |
| MAP_REGION_FLAT(BL2_BASE, BL2_END - BL2_BASE, |
| MT_MEMORY | MT_RW | MT_SECURE), |
| MAP_REGION_FLAT(BL_CODE_BASE, BL_CODE_END - BL_CODE_BASE, |
| MT_CODE | MT_SECURE), |
| MAP_REGION_FLAT(BL_RO_DATA_BASE, |
| BL_RO_DATA_END - BL_RO_DATA_BASE, |
| MT_RO_DATA | MT_SECURE), |
| #if USE_COHERENT_MEM_BAR |
| MAP_REGION_FLAT(BL_COHERENT_RAM_BASE, |
| BL_COHERENT_RAM_END - BL_COHERENT_RAM_BASE, |
| MT_DEVICE | MT_RW | MT_SECURE), |
| #endif |
| {0}, |
| }; |
| |
| setup_page_tables(bl_regions, plat_stratix10_mmap); |
| |
| enable_mmu_el3(0); |
| |
| dw_mmc_params_t params = EMMC_INIT_PARAMS(0x100000); |
| |
| info.mmc_dev_type = MMC_IS_SD; |
| info.ocr_voltage = OCR_3_3_3_4 | OCR_3_2_3_3; |
| |
| switch (boot_source) { |
| case BOOT_SOURCE_SDMMC: |
| dw_mmc_init(¶ms, &info); |
| stratix10_io_setup(); |
| break; |
| default: |
| ERROR("Unsupported boot source\n"); |
| panic(); |
| break; |
| } |
| } |
| |
| uint32_t get_spsr_for_bl33_entry(void) |
| { |
| unsigned long el_status; |
| unsigned int mode; |
| uint32_t spsr; |
| |
| /* Figure out what mode we enter the non-secure world in */ |
| el_status = read_id_aa64pfr0_el1() >> ID_AA64PFR0_EL2_SHIFT; |
| el_status &= ID_AA64PFR0_ELX_MASK; |
| |
| mode = (el_status) ? MODE_EL2 : MODE_EL1; |
| |
| /* |
| * TODO: Consider the possibility of specifying the SPSR in |
| * the FIP ToC and allowing the platform to have a say as |
| * well. |
| */ |
| spsr = SPSR_64(mode, MODE_SP_ELX, DISABLE_ALL_EXCEPTIONS); |
| return spsr; |
| } |
| |
| |
| int bl2_plat_handle_post_image_load(unsigned int image_id) |
| { |
| bl_mem_params_node_t *bl_mem_params = get_bl_mem_params_node(image_id); |
| |
| switch (image_id) { |
| case BL33_IMAGE_ID: |
| bl_mem_params->ep_info.args.arg0 = 0xffff & read_mpidr(); |
| bl_mem_params->ep_info.spsr = get_spsr_for_bl33_entry(); |
| break; |
| default: |
| break; |
| } |
| |
| return 0; |
| } |
| |
| /******************************************************************************* |
| * Perform any BL3-1 platform setup code |
| ******************************************************************************/ |
| void bl2_platform_setup(void) |
| { |
| } |
| |