| /* |
| * Copyright (c) 2021, Arm Limited. All rights reserved. |
| * |
| * SPDX-License-Identifier: BSD-3-Clause |
| */ |
| |
| #ifndef GPT_RME_PRIVATE_H |
| #define GPT_RME_PRIVATE_H |
| |
| #include <arch.h> |
| #include <lib/gpt_rme/gpt_rme.h> |
| #include <lib/utils_def.h> |
| |
| /******************************************************************************/ |
| /* GPT descriptor definitions */ |
| /******************************************************************************/ |
| |
| /* GPT level 0 descriptor bit definitions. */ |
| #define GPT_L0_TYPE_MASK UL(0xF) |
| #define GPT_L0_TYPE_SHIFT U(0) |
| |
| /* For now, we don't support contiguous descriptors, only table and block. */ |
| #define GPT_L0_TYPE_TBL_DESC UL(0x3) |
| #define GPT_L0_TYPE_BLK_DESC UL(0x1) |
| |
| #define GPT_L0_TBL_DESC_L1ADDR_MASK UL(0xFFFFFFFFFF) |
| #define GPT_L0_TBL_DESC_L1ADDR_SHIFT U(12) |
| |
| #define GPT_L0_BLK_DESC_GPI_MASK UL(0xF) |
| #define GPT_L0_BLK_DESC_GPI_SHIFT U(4) |
| |
| /* GPT level 1 descriptor bit definitions */ |
| #define GPT_L1_GRAN_DESC_GPI_MASK UL(0xF) |
| |
| /* |
| * This macro fills out every GPI entry in a granules descriptor to the same |
| * value. |
| */ |
| #define GPT_BUILD_L1_DESC(_gpi) (((uint64_t)(_gpi) << 4*0) | \ |
| ((uint64_t)(_gpi) << 4*1) | \ |
| ((uint64_t)(_gpi) << 4*2) | \ |
| ((uint64_t)(_gpi) << 4*3) | \ |
| ((uint64_t)(_gpi) << 4*4) | \ |
| ((uint64_t)(_gpi) << 4*5) | \ |
| ((uint64_t)(_gpi) << 4*6) | \ |
| ((uint64_t)(_gpi) << 4*7) | \ |
| ((uint64_t)(_gpi) << 4*8) | \ |
| ((uint64_t)(_gpi) << 4*9) | \ |
| ((uint64_t)(_gpi) << 4*10) | \ |
| ((uint64_t)(_gpi) << 4*11) | \ |
| ((uint64_t)(_gpi) << 4*12) | \ |
| ((uint64_t)(_gpi) << 4*13) | \ |
| ((uint64_t)(_gpi) << 4*14) | \ |
| ((uint64_t)(_gpi) << 4*15)) |
| |
| /******************************************************************************/ |
| /* GPT platform configuration */ |
| /******************************************************************************/ |
| |
| /* This value comes from GPCCR_EL3 so no externally supplied definition. */ |
| #define GPT_L0GPTSZ ((unsigned int)((read_gpccr_el3() >> \ |
| GPCCR_L0GPTSZ_SHIFT) & GPCCR_L0GPTSZ_MASK)) |
| |
| /* The "S" value is directly related to L0GPTSZ */ |
| #define GPT_S_VAL (GPT_L0GPTSZ + 30U) |
| |
| /* |
| * Map PPS values to T values. |
| * |
| * PPS Size T |
| * 0b000 4GB 32 |
| * 0b001 64GB 36 |
| * 0b010 1TB 40 |
| * 0b011 4TB 42 |
| * 0b100 16TB 44 |
| * 0b101 256TB 48 |
| * 0b110 4PB 52 |
| * |
| * See section 15.1.27 of the RME specification. |
| */ |
| typedef enum { |
| PPS_4GB_T = 32U, |
| PPS_64GB_T = 36U, |
| PPS_1TB_T = 40U, |
| PPS_4TB_T = 42U, |
| PPS_16TB_T = 44U, |
| PPS_256TB_T = 48U, |
| PPS_4PB_T = 52U |
| } gpt_t_val_e; |
| |
| /* |
| * Map PGS values to P values. |
| * |
| * PGS Size P |
| * 0b00 4KB 12 |
| * 0b10 16KB 14 |
| * 0b01 64KB 16 |
| * |
| * Note that pgs=0b10 is 16KB and pgs=0b01 is 64KB, this is not a typo. |
| * |
| * See section 15.1.27 of the RME specification. |
| */ |
| typedef enum { |
| PGS_4KB_P = 12U, |
| PGS_16KB_P = 14U, |
| PGS_64KB_P = 16U |
| } gpt_p_val_e; |
| |
| /* Max valid value for PGS. */ |
| #define GPT_PGS_MAX (2U) |
| |
| /* Max valid value for PPS. */ |
| #define GPT_PPS_MAX (6U) |
| |
| /******************************************************************************/ |
| /* L0 address attribute macros */ |
| /******************************************************************************/ |
| |
| /* |
| * Width of the L0 index field. |
| * |
| * If S is greater than or equal to T then there is a single L0 region covering |
| * the entire protected space so there is no L0 index, so the width (and the |
| * derivative mask value) are both zero. If we don't specifically handle this |
| * special case we'll get a negative width value which does not make sense and |
| * would cause problems. |
| */ |
| #define GPT_L0_IDX_WIDTH(_t) (((_t) > GPT_S_VAL) ? \ |
| ((_t) - GPT_S_VAL) : (0U)) |
| |
| /* Bit shift for the L0 index field in a PA. */ |
| #define GPT_L0_IDX_SHIFT (GPT_S_VAL) |
| |
| /* |
| * Mask for the L0 index field, must be shifted. |
| * |
| * The value 0x3FFFFF is 22 bits wide which is the maximum possible width of the |
| * L0 index within a physical address. This is calculated by |
| * ((t_max - 1) - s_min + 1) where t_max is 52 for 4PB, the largest PPS, and |
| * s_min is 30 for 1GB, the smallest L0GPTSZ. |
| */ |
| #define GPT_L0_IDX_MASK(_t) (0x3FFFFFUL >> (22U - \ |
| (GPT_L0_IDX_WIDTH(_t)))) |
| |
| /* Total number of L0 regions. */ |
| #define GPT_L0_REGION_COUNT(_t) ((GPT_L0_IDX_MASK(_t)) + 1U) |
| |
| /* Total size of each GPT L0 region in bytes. */ |
| #define GPT_L0_REGION_SIZE (1UL << (GPT_L0_IDX_SHIFT)) |
| |
| /* Total size in bytes of the whole L0 table. */ |
| #define GPT_L0_TABLE_SIZE(_t) ((GPT_L0_REGION_COUNT(_t)) << 3U) |
| |
| /******************************************************************************/ |
| /* L1 address attribute macros */ |
| /******************************************************************************/ |
| |
| /* |
| * Width of the L1 index field. |
| * |
| * This field does not have a special case to handle widths less than zero like |
| * the L0 index field above since all valid combinations of PGS (p) and L0GPTSZ |
| * (s) will result in a positive width value. |
| */ |
| #define GPT_L1_IDX_WIDTH(_p) ((GPT_S_VAL - 1U) - ((_p) + 3U)) |
| |
| /* Bit shift for the L1 index field. */ |
| #define GPT_L1_IDX_SHIFT(_p) ((_p) + 4U) |
| |
| /* |
| * Mask for the L1 index field, must be shifted. |
| * |
| * The value 0x7FFFFF is 23 bits wide and is the maximum possible width of the |
| * L1 index within a physical address. It is calculated by |
| * ((s_max - 1) - (p_min + 4) + 1) where s_max is 39 for 512gb, the largest |
| * L0GPTSZ, and p_min is 12 for 4KB granules, the smallest PGS. |
| */ |
| #define GPT_L1_IDX_MASK(_p) (0x7FFFFFUL >> (23U - \ |
| (GPT_L1_IDX_WIDTH(_p)))) |
| |
| /* Bit shift for the index of the L1 GPI in a PA. */ |
| #define GPT_L1_GPI_IDX_SHIFT(_p) (_p) |
| |
| /* Mask for the index of the L1 GPI in a PA. */ |
| #define GPT_L1_GPI_IDX_MASK (0xF) |
| |
| /* Total number of entries in each L1 table. */ |
| #define GPT_L1_ENTRY_COUNT(_p) ((GPT_L1_IDX_MASK(_p)) + 1U) |
| |
| /* Total size in bytes of each L1 table. */ |
| #define GPT_L1_TABLE_SIZE(_p) ((GPT_L1_ENTRY_COUNT(_p)) << 3U) |
| |
| /******************************************************************************/ |
| /* General helper macros */ |
| /******************************************************************************/ |
| |
| /* Protected space actual size in bytes. */ |
| #define GPT_PPS_ACTUAL_SIZE(_t) (1UL << (_t)) |
| |
| /* Granule actual size in bytes. */ |
| #define GPT_PGS_ACTUAL_SIZE(_p) (1UL << (_p)) |
| |
| /* L0 GPT region size in bytes. */ |
| #define GPT_L0GPTSZ_ACTUAL_SIZE (1UL << GPT_S_VAL) |
| |
| /* Get the index of the L0 entry from a physical address. */ |
| #define GPT_L0_IDX(_pa) ((_pa) >> GPT_L0_IDX_SHIFT) |
| |
| /* |
| * This definition is used to determine if a physical address lies on an L0 |
| * region boundary. |
| */ |
| #define GPT_IS_L0_ALIGNED(_pa) (((_pa) & (GPT_L0_REGION_SIZE - U(1))) == U(0)) |
| |
| /* Get the type field from an L0 descriptor. */ |
| #define GPT_L0_TYPE(_desc) (((_desc) >> GPT_L0_TYPE_SHIFT) & \ |
| GPT_L0_TYPE_MASK) |
| |
| /* Create an L0 block descriptor. */ |
| #define GPT_L0_BLK_DESC(_gpi) (GPT_L0_TYPE_BLK_DESC | \ |
| (((_gpi) & GPT_L0_BLK_DESC_GPI_MASK) << \ |
| GPT_L0_BLK_DESC_GPI_SHIFT)) |
| |
| /* Create an L0 table descriptor with an L1 table address. */ |
| #define GPT_L0_TBL_DESC(_pa) (GPT_L0_TYPE_TBL_DESC | ((uint64_t)(_pa) & \ |
| (GPT_L0_TBL_DESC_L1ADDR_MASK << \ |
| GPT_L0_TBL_DESC_L1ADDR_SHIFT))) |
| |
| /* Get the GPI from an L0 block descriptor. */ |
| #define GPT_L0_BLKD_GPI(_desc) (((_desc) >> GPT_L0_BLK_DESC_GPI_SHIFT) & \ |
| GPT_L0_BLK_DESC_GPI_MASK) |
| |
| /* Get the L1 address from an L0 table descriptor. */ |
| #define GPT_L0_TBLD_ADDR(_desc) ((uint64_t *)(((_desc) & \ |
| (GPT_L0_TBL_DESC_L1ADDR_MASK << \ |
| GPT_L0_TBL_DESC_L1ADDR_SHIFT)))) |
| |
| /* Get the index into the L1 table from a physical address. */ |
| #define GPT_L1_IDX(_p, _pa) (((_pa) >> GPT_L1_IDX_SHIFT(_p)) & \ |
| GPT_L1_IDX_MASK(_p)) |
| |
| /* Get the index of the GPI within an L1 table entry from a physical address. */ |
| #define GPT_L1_GPI_IDX(_p, _pa) (((_pa) >> GPT_L1_GPI_IDX_SHIFT(_p)) & \ |
| GPT_L1_GPI_IDX_MASK) |
| |
| /* Determine if an address is granule-aligned. */ |
| #define GPT_IS_L1_ALIGNED(_p, _pa) (((_pa) & (GPT_PGS_ACTUAL_SIZE(_p) - U(1))) \ |
| == U(0)) |
| |
| #endif /* GPT_RME_PRIVATE_H */ |