| /* |
| * Copyright (c) 2016-2021, Broadcom |
| * |
| * SPDX-License-Identifier: BSD-3-Clause |
| */ |
| |
| #ifndef SR_DEF_H |
| #define SR_DEF_H |
| |
| #ifndef __ASSEMBLER__ |
| #include <lib/mmio.h> |
| #endif |
| |
| #include <common/interrupt_props.h> |
| #include <drivers/arm/gic_common.h> |
| |
| #include <crmu_def.h> |
| |
| /* Special value used to verify platform parameters from BL2 to BL3-1 */ |
| #define BRCM_BL31_PLAT_PARAM_VAL ULL(0x0f1e2d3c4b5a6978) |
| |
| #define MHB_BASE_ADDR 0x60000000 |
| #define PLAT_BRCM_CCN_BASE 0x61000000 |
| #define CORESIGHT_BASE_ADDR 0x62000000 |
| #define SMMU_BASE 0x64000000 |
| |
| /* memory map entries*/ |
| /* Grouping block device for bigger MMU region */ |
| /* covers MHB, CNN, coresight, GIC, MMU, APB, CRMU */ |
| #define PERIPH0_BASE MHB_BASE_ADDR |
| #define PERIPH0_SIZE 0x06d00000 |
| |
| #define PERIPH1_BASE 0x66d80000 |
| #define PERIPH1_SIZE 0x00f80000 |
| |
| #define HSLS_BASE_ADDR 0x68900000 |
| #define HSLS_SIZE 0x04500000 |
| |
| #define GIC500_BASE 0x63c00000 |
| #define GIC500_SIZE 0x400000 |
| |
| /******************************************************************************* |
| * CCN related constants |
| ******************************************************************************/ |
| #define OLY_MN_REGISTERS_NODE0_SECURE_ACCESS (PLAT_BRCM_CCN_BASE + 0x0) |
| |
| #define OLY_RNI3PDVM_REGISTERS_NODE8_AUX_CTL (PLAT_BRCM_CCN_BASE + 0x880500) |
| |
| /* Used for acceleration of coherent ordered writes */ |
| #define OLY_RNI3PDVM_REGISTERS_NODE8_AUX_CTL_WUO BIT(4) |
| /* Wait for completion of requests at RN-I */ |
| #define OLY_RNI3PDVM_REGISTERS_NODE8_AUX_CTL_WFC BIT(3) |
| |
| /* |
| * Forces all reads from the RN-I to be sent with the request order bit set |
| * and this ensures ordered allocation of read data buffers in the RN-I |
| */ |
| #define OLY_RNI3PDVM_REGISTERS_NODE8_AUX_CTL_RQO BIT(5) |
| |
| #define OLY_RNI3PDVM_REGISTERS_NODE14_AUX_CTL (PLAT_BRCM_CCN_BASE + 0x8e0500) |
| |
| /* Wait for completion of requests at RN-I */ |
| #define OLY_RNI3PDVM_REGISTERS_NODE14_AUX_CTL_WFC BIT(3) |
| |
| #define OLY_HNI_REGISTERS_NODE0_POS_CONTROL (PLAT_BRCM_CCN_BASE + 0x80000) |
| #define POS_CONTROL_HNI_POS_EN BIT(0) |
| |
| #define OLY_HNI_REGISTERS_NODE0_PCIERC_RNI_NODEID_LIST \ |
| (PLAT_BRCM_CCN_BASE + 0x80008) |
| /* PAXB and PAXC connected to 8th Node */ |
| #define SR_RNI_PCIE_CONNECTED BIT(8) |
| /* PAXB connected to 6th Node */ |
| #define SRP_RNI_PCIE_CONNECTED BIT(6) |
| |
| #define OLY_HNI_REGISTERS_NODE0_SA_AUX_CTL (PLAT_BRCM_CCN_BASE + 0x80500) |
| #define SA_AUX_CTL_POS_EARLY_WR_COMP_EN BIT(5) |
| #define SA_AUX_CTL_SER_DEVNE_WR BIT(9) |
| |
| /******************************************************************************* |
| * Coresight related constants |
| ******************************************************************************/ |
| #define CORESIGHT_BASE_ADDR 0x62000000 |
| |
| #define IHOST0_BASE 0x66000000 |
| #define IHOST_ADDR_SPACE 0x2000 |
| |
| /******************************************************************************* |
| * SCR related constants |
| ******************************************************************************/ |
| #define SCR_BASE 0x6600a000 |
| #define SCR_ARCACHE_OFFSET 4 |
| #define SCR_ARCACHE_MASK (0x3 << SCR_ARCACHE_OFFSET) |
| #define SCR_AWCACHE_OFFSET 6 |
| #define SCR_AWCACHE_MASK (0x3 << SCR_AWCACHE_OFFSET) |
| #define SCR_AXCACHE_CONFIG_MASK (SCR_ARCACHE_MASK | SCR_AWCACHE_MASK) |
| #define SCR_TBUX_AXCACHE_CONFIG ((0x1 << SCR_AWCACHE_OFFSET) | \ |
| (0x1 << SCR_ARCACHE_OFFSET)) |
| |
| #define SCR_REGS_SCR_SOFT_RESET (SCR_BASE + 0x1c) |
| #define SCR_REGS_GIC_SOFT_RESET BIT(0) |
| |
| #define SCR_GPV_BASE 0x66100000 |
| #define SCR_NOC_SECURITY0 (SCR_GPV_BASE + 0x08) |
| #define SCR_NOC_DDR_REGISTER_ACCESS (SCR_GPV_BASE + 0x30) |
| |
| /******************************************************************************* |
| * MEMC and DDR related constants |
| ******************************************************************************/ |
| #define DDR0_CONTROL_ROOT 0x66200000 |
| #define EMEM_SS_CFG_0_ROOT 0x66202000 |
| #define EMEM_SYS_IF_0_ROOT 0x66204000 |
| #define DDR_PHY0_ROOT 0x66240000 |
| |
| #define DDR1_CONTROL_ROOT 0x66280000 |
| #define EMEM_SS_CFG_1_ROOT 0x66282000 |
| #define EMEM_SYS_IF_1_ROOT 0x66284000 |
| #define DDR_PHY1_ROOT 0x662c0000 |
| |
| #define DDR2_CONTROL_ROOT 0x66300000 |
| #define EMEM_SS_CFG_2_ROOT 0x66302000 |
| #define EMEM_SYS_IF_2_ROOT 0x66304000 |
| #define DDR_PHY2_ROOT 0x66340000 |
| |
| /******************************************************************************* |
| * TZC400 related constants |
| ******************************************************************************/ |
| #define TZC_400_BASE 0x66d84000 |
| |
| /******************************************************************************* |
| * FS4 related constants |
| ******************************************************************************/ |
| #define FS4_SRAM_IDM_IO_CONTROL_DIRECT 0x66d8a408 |
| |
| #define FS4_CRYPTO_IDM_IO_CONTROL_DIRECT 0x66d8e408 |
| #define FS4_CRYPTO_IDM_RESET_CONTROL 0x66d8e800 |
| #define FS4_CRYPTO_BASE 0x67000000 |
| #define FS4_CRYPTO_DME_BASE (FS4_CRYPTO_BASE + 0x280000) |
| |
| #define FS4_RAID_IDM_IO_CONTROL_DIRECT 0x66d8f408 |
| #define FS4_RAID_IDM_IO_STATUS 0x66d8f500 |
| #define FS4_RAID_IDM_RESET_CONTROL 0x66d8f800 |
| #define FS4_RAID_BASE 0x67400000 |
| #define FS4_RAID_DME_BASE (FS4_RAID_BASE + 0x280000) |
| |
| #define FS4_CRYPTO_GPV_BASE 0x67300000 |
| #define FS4_RAID_GPV_BASE 0x67700000 |
| |
| #define FS6_PKI_BASE 0x67400000 |
| #define FS6_PKI_DME_BASE 0x66D90000 |
| |
| #define TZC400_FS_SRAM_ROOT 0x66d84000 |
| #define GATE_KEEPER_OFFSET 0x8 |
| #define REGION_ATTRIBUTES_0_OFFSET 0x110 |
| #define REGION_ID_ACCESS_0_OFFSET 0x114 |
| |
| #define NIC400_FS_NOC_ROOT 0x66e00000 |
| #define NIC400_FS_NOC_SECURITY2_OFFSET 0x10 |
| #define NIC400_FS_NOC_SECURITY4_OFFSET 0x18 |
| #define NIC400_FS_NOC_SECURITY7_OFFSET 0x24 |
| |
| /******************************************************************************* |
| * SATA PHY related constants |
| ******************************************************************************/ |
| #define SATA_BASE 0x67d00000 |
| |
| /******************************************************************************* |
| * USB related constants |
| ******************************************************************************/ |
| #define USB_BASE 0x68500000 |
| #define USB_SIZE 0x00400000 |
| #define XHC_BASE (USB_BASE + 0x11000) |
| #define MAX_USB_PORTS 3 |
| |
| /******************************************************************************* |
| * HSLS related constants |
| ******************************************************************************/ |
| #define IPROC_ROOT 0x68900000 |
| #define HSLS_ICFG_REGS_BASE IPROC_ROOT |
| #define HSLS_IDM_REGS_BASE 0x68e00000 |
| #define HSLS_MODE_SEL_CONTROL 0x68a40000 |
| #define HSLS_TZPC_BASE 0x68b40000 |
| #define HSLS_GPV_BASE 0x6cd00000 |
| |
| /******************************************************************************* |
| * Chip ID related constants |
| ******************************************************************************/ |
| #define ICFG_CHIP_ID HSLS_ICFG_REGS_BASE |
| #define CHIP_ID_SR 0xd730 |
| #define CHIP_ID_NS3Z 0xe56d |
| #define CHIP_ID_MASK 0xf000 |
| #define ICFG_CHIP_REVISION_ID (HSLS_ICFG_REGS_BASE + 0x4) |
| #define PLAT_CHIP_ID_GET (mmio_read_32(ICFG_CHIP_ID)) |
| #define PLAT_CHIP_REV_GET (mmio_read_32(ICFG_CHIP_REVISION_ID)) |
| |
| /******************************************************************************* |
| * CMIC MII (MDIO) related constant |
| ******************************************************************************/ |
| #define PLAT_CMIC_MIIM_BASE 0x68920000U |
| |
| /******************************************************************************* |
| * Timers related constants |
| ******************************************************************************/ |
| /* ChipcommonG_tim0_TIM_TIMER1Load 0x68930000 */ |
| #define SP804_TIMER0_BASE 0x68930000 |
| #define SP804_TIMER1_BASE 0x68940000 |
| #define SP804_TIMER0_TIMER_VAL_REG_OFFSET 0x4 |
| #define SP804_TIMER0_CLKMULT 2 |
| #define SP804_TIMER0_CLKDIV 25 |
| |
| /******************************************************************************* |
| * GPIO related constants |
| ******************************************************************************/ |
| #define IPROC_GPIO_NS_BASE 0x689d0000 |
| #define IPROC_GPIO_S_BASE 0x68b00000 |
| #define IPROC_GPIO_NR 151 |
| #define GPIO_S_CNTRL_REG 0x68b60000 |
| |
| /******************************************************************************* |
| * I2C SMBUS related constants |
| ******************************************************************************/ |
| #define SMBUS0_REGS_BASE 0x689b0000 |
| #define SMBUS1_REGS_BASE 0x689e0000 |
| |
| /******************************************************************************* |
| * UART related constants |
| ******************************************************************************/ |
| #define ChipcommonG_UART0_UART_RBR_THR_DLL 0x68a00000 |
| #define ChipcommonG_UART1_UART_RBR_THR_DLL 0x68a10000 |
| #define ChipcommonG_UART2_UART_RBR_THR_DLL 0x68a20000 |
| #define ChipcommonG_UART3_UART_RBR_THR_DLL 0x68a30000 |
| |
| #define UART0_BASE_ADDR ChipcommonG_UART0_UART_RBR_THR_DLL |
| #define UART1_BASE_ADDR ChipcommonG_UART1_UART_RBR_THR_DLL |
| #define UART2_BASE_ADDR ChipcommonG_UART2_UART_RBR_THR_DLL |
| #define UART3_BASE_ADDR ChipcommonG_UART3_UART_RBR_THR_DLL |
| |
| #define UART_SPR_OFFSET 0x1c /* Scratch Pad Register */ |
| |
| #define LOG_LEVEL_REGISTER CRMU_SPARE_REG_3 |
| #define GET_LOG_LEVEL() (mmio_read_32(LOG_LEVEL_REGISTER)) |
| #define SET_LOG_LEVEL(x) (mmio_write_32(LOG_LEVEL_REGISTER, x)) |
| |
| #define IO_RETRY_REGISTER CRMU_SPARE_REG_4 |
| |
| #define DWC_UART_REFCLK (25 * 1000 * 1000) |
| #define DWC_UART_REFCLK_DIV 16 |
| /* Baud rate in emulation will vary based on setting of 25MHz SCLK */ |
| #define DWC_UART_BAUDRATE 115200 |
| |
| #define BRCM_CRASH_CONSOLE_BASE UART1_BASE_ADDR |
| #define BRCM_CRASH_CONSOLE_REFCLK DWC_UART_REFCLK |
| #define BRCM_CRASH_CONSOLE_BAUDRATE DWC_UART_BAUDRATE |
| |
| #ifdef BOARD_CONSOLE_UART |
| #define PLAT_BRCM_BOOT_UART_BASE BOARD_CONSOLE_UART |
| #else |
| #define PLAT_BRCM_BOOT_UART_BASE UART1_BASE_ADDR |
| #endif |
| #define CONSOLE_UART_ID ((PLAT_BRCM_BOOT_UART_BASE >> 16) & 0x3) |
| |
| #define PLAT_BRCM_BOOT_UART_CLK_IN_HZ DWC_UART_REFCLK |
| #define BRCM_CONSOLE_BAUDRATE DWC_UART_BAUDRATE |
| |
| #define PLAT_BRCM_BL31_RUN_UART_BASE PLAT_BRCM_BOOT_UART_BASE |
| #define PLAT_BRCM_BL31_RUN_UART_CLK_IN_HZ PLAT_BRCM_BOOT_UART_CLK_IN_HZ |
| |
| /******************************************************************************* |
| * IOMUX related constants |
| ******************************************************************************/ |
| #define HSLS_IOPAD_BASE HSLS_MODE_SEL_CONTROL |
| #define MODE_SEL_CONTROL_FSEL_MASK 0x7 |
| #define MODE_SEL_CONTROL_FSEL_MODE0 0x0 |
| #define MODE_SEL_CONTROL_FSEL_MODE1 0x1 |
| #define MODE_SEL_CONTROL_FSEL_MODE2 0x2 |
| #define MODE_SEL_CONTROL_FSEL_MODE3 0x3 |
| #define MODE_SEL_CONTROL_FSEL_DEBUG 0x4 |
| #define IPROC_IOPAD_MODE_BASE (HSLS_MODE_SEL_CONTROL + 0x29c) |
| #define UART0_SIN_MODE_SEL_CONTROL (HSLS_MODE_SEL_CONTROL + 0x4a8) |
| #define UART0_SOUT_MODE_SEL_CONTROL (HSLS_MODE_SEL_CONTROL + 0x4ac) |
| #define UART1_SIN_MODE_SEL_CONTROL (HSLS_MODE_SEL_CONTROL + 0x3b8) |
| #define UART1_SOUT_MODE_SEL_CONTROL (HSLS_MODE_SEL_CONTROL + 0x3bc) |
| #define UARTx_SIN_MODE_SEL_CONTROL_FSEL 0 |
| #define UARTx_SOUT_MODE_SEL_CONTROL_FSEL 0 |
| |
| /******************************************************************************* |
| * PKA constants |
| ******************************************************************************/ |
| #define ICFG_PKA_MEM_PWR_CTRL (HSLS_ICFG_REGS_BASE + 0xac0) |
| #define ICFG_PKA_MEM_PWR_CTRL__POWERONIN BIT(0) |
| #define ICFG_PKA_MEM_PWR_CTRL__POWEROKIN BIT(1) |
| #define ICFG_PKA_MEM_PWR_CTRL__ARRPOWERONIN BIT(2) |
| #define ICFG_PKA_MEM_PWR_CTRL__ARRPOWEROKIN BIT(3) |
| #define ICFG_PKA_MEM_PWR_CTRL__POWERONOUT BIT(4) |
| #define ICFG_PKA_MEM_PWR_CTRL__POWEROKOUT BIT(5) |
| #define ICFG_PKA_MEM_PWR_CTRL__ARRPOWERONOUT BIT(6) |
| #define ICFG_PKA_MEM_PWR_CTRL__ARRPOWEROKOUT BIT(7) |
| #define ICFG_PKA_MEM_PWR_CTRL__ISO BIT(8) |
| |
| /******************************************************************************* |
| * RNG constants |
| ******************************************************************************/ |
| #define RNG_BASE_ADDR 0x68b20000 |
| |
| /******************************************************************************* |
| * Trusted Watchdog constants |
| ******************************************************************************/ |
| #define ARM_SP805_TWDG_BASE 0x68b30000 |
| #define ARM_SP805_TWDG_CLK_HZ ((25 * 1000 * 1000) / 2) |
| /* |
| * The TBBR document specifies a watchdog timeout of 256 seconds. SP805 |
| * asserts reset after two consecutive countdowns (2 x 128 = 256 sec) |
| */ |
| #define ARM_TWDG_TIMEOUT_SEC 128 |
| #define ARM_TWDG_LOAD_VAL (ARM_SP805_TWDG_CLK_HZ * \ |
| ARM_TWDG_TIMEOUT_SEC) |
| |
| /******************************************************************************* |
| * SOTP related constants |
| ******************************************************************************/ |
| #define SOTP_REGS_OTP_BASE 0x68b50000 |
| #define SOTP_CHIP_CTRL (SOTP_REGS_OTP_BASE + 0x4c) |
| #define SOTP_CLEAR_SYSCTRL_ALL_MASTER_NS 0 |
| |
| /******************************************************************************* |
| * DMAC/PL330 related constants |
| ******************************************************************************/ |
| #define DMAC_M0_IDM_IO_CONTROL_DIRECT (HSLS_IDM_REGS_BASE + 0x408) |
| #define BOOT_MANAGER_NS BIT(25) |
| #define DMAC_M0_IDM_RESET_CONTROL (HSLS_IDM_REGS_BASE + 0x800) |
| #define ICFG_DMAC_CONFIG_0 (HSLS_ICFG_REGS_BASE + 0x190) |
| #define ICFG_DMAC_CONFIG_1 (HSLS_ICFG_REGS_BASE + 0x194) |
| #define ICFG_DMAC_CONFIG_2 (HSLS_ICFG_REGS_BASE + 0x198) |
| #define BOOT_PERIPHERAL_NS 0xffffffff |
| #define ICFG_DMAC_CONFIG_3 (HSLS_ICFG_REGS_BASE + 0x19c) |
| #define BOOT_IRQ_NS 0x0000ffff |
| #define ICFG_DMAC_SID_ARADDR_CONTROL (HSLS_ICFG_REGS_BASE + 0xaf0) |
| #define ICFG_DMAC_SID_AWADDR_CONTROL (HSLS_ICFG_REGS_BASE + 0xaf4) |
| #define ICFG_DMAC_MEM_PWR_CTRL__POWERONIN BIT(0) |
| #define ICFG_DMAC_MEM_PWR_CTRL__POWEROKIN BIT(1) |
| #define ICFG_DMAC_MEM_PWR_CTRL__ARRPOWERONIN BIT(2) |
| #define ICFG_DMAC_MEM_PWR_CTRL__ARRPOWEROKIN BIT(3) |
| #define ICFG_DMAC_MEM_PWR_CTRL__POWERONOUT BIT(4) |
| #define ICFG_DMAC_MEM_PWR_CTRL__POWEROKOUT BIT(5) |
| #define ICFG_DMAC_MEM_PWR_CTRL__ARRPOWERONOUT BIT(6) |
| #define ICFG_DMAC_MEM_PWR_CTRL__ARRPOWEROKOUT BIT(7) |
| #define ICFG_DMAC_MEM_PWR_CTRL__ISO BIT(8) |
| #define ICFG_DMAC_MEM_PWR_CTRL (HSLS_ICFG_REGS_BASE + 0xadc) |
| |
| /******************************************************************************* |
| * PNOR related constants |
| ******************************************************************************/ |
| #define PNOR_ICFG_BASE (HSLS_ICFG_REGS_BASE + 0x780) |
| #define PNOR_ICFG_CS_0 PNOR_ICFG_BASE |
| #define PNOR_ICFG_CS_1 (PNOR_ICFG_BASE + 0x4) |
| #define PNOR_ICFG_CS_2 (PNOR_ICFG_BASE + 0x8) |
| #define PNOR_ICFG_CS_x_MASK0_MASK 0xff |
| #define PNOR_ICFG_CS_x_MASK0_SHIFT 8 |
| #define PNOR_ICFG_CS_x_MATCH0_MASK 0xff |
| #define PNOR_ICFG_CS_x_MATCH0_SHIFT 0 |
| |
| #define PNOR_IDM_BASE (HSLS_IDM_REGS_BASE + 0xb000) |
| #define PNOR_IDM_IO_CONTROL_DIRECT (PNOR_IDM_BASE + 0x408) |
| #define PNOR_IDM_IO_RESET_CONTROL (PNOR_IDM_BASE + 0x800) |
| |
| #define PNOR_REG_BASE 0x68c50000 |
| #define PNOR_REG_DIRECT_CMD (PNOR_REG_BASE + 0x010) |
| #define PNOR_REG_SET_CYCLES (PNOR_REG_BASE + 0x014) |
| #define PNOR_REG_SET_OPMODE (PNOR_REG_BASE + 0x018) |
| #define PNOR_REG_REFRESH_0 (PNOR_REG_BASE + 0x020) |
| #define PNOR_REG_PERIPH_ID0 (PNOR_REG_BASE + 0xfe0) |
| #define PNOR_REG_PERIPH_ID1 (PNOR_REG_BASE + 0xfe4) |
| #define PNOR_REG_PERIPH_ID2 (PNOR_REG_BASE + 0xfe8) |
| #define PNOR_REG_PERIPH_ID3 (PNOR_REG_BASE + 0xfec) |
| #define PNOR_REG_PERIPH_IDx_MASK 0xff |
| |
| /******************************************************************************* |
| * NAND related constants |
| ******************************************************************************/ |
| #define NAND_FLASH_REVISION 0x68c60000 |
| #define NAND_IDM_IDM_IO_CONTROL_DIRECT (HSLS_IDM_REGS_BASE + 0xa408) |
| #define NAND_IDM_IDM_RESET_CONTROL (HSLS_IDM_REGS_BASE + 0xa800) |
| |
| /******************************************************************************* |
| * eMMC related constants |
| ******************************************************************************/ |
| #define PLAT_SD_MAX_READ_LENGTH 0x400 |
| |
| #define SDIO0_EMMCSDXC_SYSADDR 0x68cf1000 |
| #define SDIO_IDM0_IO_CONTROL_DIRECT (HSLS_IDM_REGS_BASE + 0x2408) |
| #define SDIO_IDM1_IO_CONTROL_DIRECT (HSLS_IDM_REGS_BASE + 0x3408) |
| #define SDIO_IDM0_IDM_RESET_CONTROL (HSLS_IDM_REGS_BASE + 0x2800) |
| #define ICFG_SDIO0_BASE (HSLS_ICFG_REGS_BASE + 0x6e4) |
| #define ICFG_SDIO1_BASE (HSLS_ICFG_REGS_BASE + 0x734) |
| #define ICFG_SDIO0_CAP0 (ICFG_SDIO0_BASE + 0x10) |
| #define ICFG_SDIO0_CAP1 (ICFG_SDIO0_BASE + 0x14) |
| #define ICFG_SDIO0_SID (HSLS_ICFG_REGS_BASE + 0xb00) |
| #define ICFG_SDIO1_SID (HSLS_ICFG_REGS_BASE + 0xb08) |
| |
| /******************************************************************************* |
| * Bootstrap related constants |
| ******************************************************************************/ |
| #define ROM_S0_IDM_IO_STATUS (HSLS_IDM_REGS_BASE + 0x9500) |
| |
| /******************************************************************************* |
| * ROM related constants |
| ******************************************************************************/ |
| #define ROM_BASE_ADDR 0x6ce00000 |
| #define ROM_VERSION_STRING_ADDR (ROM_BASE_ADDR + 0x28000) |
| #define ROM_BUILD_MESSAGE_ADDR (ROM_BASE_ADDR + 0x28018) |
| |
| /******************************************************************************* |
| * Boot source peripheral related constants |
| ******************************************************************************/ |
| #define QSPI_CTRL_BASE_ADDR 0x68c70000 |
| #define QSPI_BASE_ADDR 0x70000000 |
| #define QSPI_SIZE 0x08000000 |
| #define NOR_BASE_ADDR 0x74000000 |
| #define NOR_SIZE 0x04000000 |
| #define NAND_BASE_ADDR 0x78000000 |
| #define NAND_SIZE 0x08000000 |
| |
| #define QSPI_IDM_RESET_CONTROL (HSLS_IDM_REGS_BASE + 0xc800) |
| |
| #define APBR_IDM_RESET_CONTROL (HSLS_IDM_REGS_BASE + 0xe800) |
| #define APBS_IDM_IDM_RESET_CONTROL (HSLS_IDM_REGS_BASE + 0xf800) |
| |
| #define APBX_IDM_IDM_IO_CONTROL_DIRECT (HSLS_IDM_REGS_BASE + 0x10408) |
| #define APBX_IDM_IDM_IO_CONTROL_DIRECT_CLK_ENABLE 0 |
| #define APBX_IDM_IDM_IO_CONTROL_DIRECT_WDOG_SCLK_SEL 2 |
| #define APBX_IDM_IDM_IO_CONTROL_DIRECT_TIM0_SCLK_SEL 4 |
| #define APBX_IDM_IDM_IO_CONTROL_DIRECT_TIM1_SCLK_SEL 6 |
| #define APBX_IDM_IDM_IO_CONTROL_DIRECT_TIM2_SCLK_SEL 8 |
| #define APBX_IDM_IDM_IO_CONTROL_DIRECT_TIM3_SCLK_SEL 10 |
| #define APBX_IDM_IDM_IO_CONTROL_DIRECT_TIM4_SCLK_SEL 12 |
| #define APBX_IDM_IDM_IO_CONTROL_DIRECT_TIM5_SCLK_SEL 13 |
| #define APBX_IDM_IDM_IO_CONTROL_DIRECT_TIM6_SCLK_SEL 14 |
| #define APBX_IDM_IDM_IO_CONTROL_DIRECT_TIM7_SCLK_SEL 15 |
| |
| #define APBY_IDM_IDM_IO_CONTROL_DIRECT (HSLS_IDM_REGS_BASE + 0x11408) |
| #define APBY_IDM_IDM_IO_CONTROL_DIRECT_CLK_ENABLE 0 |
| #define APBY_IDM_IDM_IO_CONTROL_DIRECT_UART0_SCLK_SEL 2 |
| #define APBY_IDM_IDM_IO_CONTROL_DIRECT_UART1_SCLK_SEL 4 |
| #define APBY_IDM_IDM_IO_CONTROL_DIRECT_UART2_SCLK_SEL 6 |
| #define APBY_IDM_IDM_IO_CONTROL_DIRECT_UART3_SCLK_SEL 8 |
| |
| #define APBZ_IDM_IDM_IO_CONTROL_DIRECT (HSLS_IDM_REGS_BASE + 0x12408) |
| #define APBZ_IDM_IDM_IO_CONTROL_DIRECT_CLK_ENABLE 0 |
| #define APBZ_IDM_IDM_IO_CONTROL_DIRECT_WDOG_SCLK_SEL 2 |
| |
| /******************************************************************************* |
| * Stingray memory map related constants |
| ******************************************************************************/ |
| |
| /* The last 4KB of Trusted SRAM are used as shared memory */ |
| #define BRCM_SHARED_RAM_SIZE 0x0 |
| #define BRCM_SHARED_RAM_BASE (PLAT_BRCM_TRUSTED_SRAM_BASE + \ |
| PLAT_BRCM_TRUSTED_SRAM_SIZE - \ |
| BRCM_SHARED_RAM_SIZE) |
| |
| /* Reserve 4 KB to store error logs in BL2 */ |
| #define BCM_ELOG_BL2_SIZE 0x00001000 |
| #define BCM_ELOG_BL2_BASE BL1_RW_LIMIT |
| |
| /* The remaining Trusted SRAM is used to load the BL images */ |
| #define BRCM_BL_RAM_BASE (PLAT_BRCM_TRUSTED_SRAM_BASE) |
| #define BRCM_BL_RAM_SIZE (PLAT_BRCM_TRUSTED_SRAM_SIZE - \ |
| BRCM_SHARED_RAM_SIZE) |
| |
| /* DDR Address where TMON temperature values are written */ |
| #define TMON_SHARED_DDR_ADDRESS 0x8f100000 |
| |
| /* Reserve 4 kB to pass data to BL33 */ |
| #define BL33_SHARED_DDR_BASE 0x8f102000 |
| #define BL33_SHARED_DDR_SIZE 0x1000 |
| |
| /* Default AP error logging base addr */ |
| #ifndef ELOG_AP_UART_LOG_BASE |
| #define ELOG_AP_UART_LOG_BASE 0x8f110000 |
| #endif |
| |
| /* Reserve 16 to store error logs in BL31 */ |
| #define BCM_ELOG_BL31_BASE ELOG_AP_UART_LOG_BASE |
| #define BCM_ELOG_BL31_SIZE 0x4000 |
| |
| /******************************************************************************* |
| * Non-secure DDR Map |
| ******************************************************************************/ |
| #define BRCM_DRAM1_BASE ULL(0x80000000) |
| #define BRCM_DRAM1_SIZE ULL(0x10000000) |
| #define BRCM_DRAM2_BASE ULL(0x880000000) |
| #define BRCM_DRAM2_SIZE ULL(0x780000000) |
| #define BRCM_DRAM3_BASE ULL(0x8800000000) |
| #define BRCM_DRAM3_SIZE ULL(0x7800000000) |
| #define BRCM_SHARED_DRAM_BASE BL33_SHARED_DDR_BASE |
| #define BRCM_SHARED_DRAM_SIZE BL33_SHARED_DDR_SIZE |
| #define BRCM_EXT_SRAM_BASE ULL(0x74000000) |
| #define BRCM_EXT_SRAM_SIZE ULL(0x4000000) |
| |
| /* Priority levels for platforms */ |
| #define PLAT_RAS_PRI 0x10 |
| #define PLAT_SDEI_CRITICAL_PRI 0x60 |
| #define PLAT_SDEI_NORMAL_PRI 0x70 |
| |
| /* Define a list of Group 1 Secure and Group 0 interrupts as per GICv3 */ |
| #define BRCM_IRQ_SEC_SGI_0 14 |
| #define BRCM_IRQ_SEC_SGI_1 15 |
| |
| /* RTC periodic interrupt */ |
| #define BRCM_IRQ_SEC_SPI_0 49 |
| |
| /* |
| * Macros for local power states in SR platforms encoded by State-ID field |
| * within the power-state parameter. |
| */ |
| |
| /* Local power state for power domains in Run state. */ |
| #define PLAT_LOCAL_STATE_RUN 0 |
| |
| /* Local power state for retention. Valid only for CPU power domains */ |
| #define PLAT_LOCAL_STATE_RET 1 |
| |
| /* |
| * Local power state for OFF/power-down. Valid for CPU and cluster power |
| * domains. |
| */ |
| #define PLAT_LOCAL_STATE_OFF 2 |
| |
| /* |
| * This macro defines the deepest retention state possible. A higher state |
| * id will represent an invalid or a power down state. |
| */ |
| #define PLAT_MAX_RET_STATE PLAT_LOCAL_STATE_RET |
| |
| /* |
| * This macro defines the deepest power down states possible. Any state ID |
| * higher than this is invalid. |
| */ |
| #define PLAT_MAX_OFF_STATE PLAT_LOCAL_STATE_OFF |
| |
| /* ChiMP-related constants */ |
| |
| #define NITRO_TZPC_TZPCDECPROT0clr 0x60c01808 |
| #define NITRO_TZPC_TZPCDECPROT0clr__DECPROT0_chimp_m_clr_R 1 |
| |
| #define NIC400_NITRO_CHIMP_S_IDM_IO_CONTROL_DIRECT 0x60e00408 |
| |
| #define CHIMP_INDIRECT_ADDR_MASK 0x3fffff |
| #define CHIMP_INDIRECT_BASE 0x60800000 |
| |
| #define CHIMP_REG_ECO_RESERVED 0x3042400 |
| |
| #define CHIMP_FLASH_ACCESS_DONE_BIT 2 |
| |
| /* indicate FRU table programming is done successfully */ |
| #define CHIMP_FRU_PROG_DONE_BIT 9 |
| |
| #define CHIMP_REG_CTRL_BPE_MODE_REG 0x0 |
| #define CHIMP_REG_CTRL_BPE_STAT_REG 0x4 |
| #define CHIMP_REG_CTRL_FSTBOOT_PTR_REG 0x8 |
| #define CHIMP_REG_CHIMP_REG_CTRL_BPE_MODE_REG__cm3_rst_L 1 |
| #define CHIMP_REG_CHIMP_REG_CTRL_BPE_MODE_REG__cm3_rst_R 1 |
| #define CHIMP_REG_CTRL_BASE 0x3040000 |
| #define CHIMP_FAST_BOOT_MODE_BIT 2 |
| #define CHIMP_REG_CHIMP_APE_SCPAD 0x3300000 |
| #define CHIMP_REG_CHIMP_SCPAD 0x3100000 |
| |
| /* Chimp health status offset in scratch pad ram */ |
| #define CHIMP_HEALTH_STATUS_OFFSET 0x8 |
| /* |
| * If not in NIC mode then FASTBOOT can be enabled. |
| * "Not in NIC mode" means that FORCE_FASTBOOT is set |
| * and a valid (1 or 2) fastboot type is specified. |
| * |
| * Three types of fastboot are supported: |
| * 0 = No fastboot. Boots Nitro/ChiMP and lets ROM loader |
| * initialize ChiMP from NVRAM (QSPI). |
| * |
| * 1 = Jump in place (need a flat image) |
| * This is intended to speedup Nitro FW boot on Palladium, |
| * can be used with a real chip as well. |
| * 2 = Jump normally with decompression |
| * Modus operandi for a real chip. Works also on Palladium |
| * Note: image decompressing takes time on Palladium. |
| * 3 = No fastboot support. No ChiMP bringup |
| * (use only for AP debug or for ChiMP's deferred setup). |
| */ |
| #define CHIMP_FASTBOOT_JUMP_DECOMPRESS 2 |
| #define CHIMP_FASTBOOT_JUMP_IN_PLACE 1 |
| #define CHIMP_FASTBOOT_NITRO_RESET 0 |
| /* |
| * Definitions for a non-Nitro access |
| * to QSPI PAD after the handshake |
| */ |
| #define QSPI_HOLD_N_MODE_SEL_CONTROL (HSLS_MODE_SEL_CONTROL + 0x3e8) |
| #define QSPI_WP_N_MODE_SEL_CONTROL (HSLS_MODE_SEL_CONTROL + 0x3ec) |
| #define QSPI_SCK_MODE_SEL_CONTROL (HSLS_MODE_SEL_CONTROL + 0x3f0) |
| #define QSPI_CS_N_MODE_SEL_CONTROL (HSLS_MODE_SEL_CONTROL + 0x3f4) |
| #define QSPI_MOSI_MODE_SEL_CONTROL (HSLS_MODE_SEL_CONTROL + 0x3f8) |
| #define QSPI_MISO_MODE_SEL_CONTROL (HSLS_MODE_SEL_CONTROL + 0x3fc) |
| |
| /******************************************************************************* |
| * Stream IDs for different blocks of SR |
| * block_id for different blocks is as follows: |
| * PCIE : 0x0 |
| * PAXC : 0x1 |
| * FS4 : 0x2 |
| * Rest of the masters(includes MHB via RNI): 0x3 |
| ******************************************************************************/ |
| #define SR_SID_VAL(block_id, subblock_id, device_num) ((block_id << 13) | \ |
| (subblock_id << 11) | \ |
| (device_num)) |
| |
| #define CRMU_STREAM_ID SR_SID_VAL(0x3, 0x0, 0x7) |
| #define CRMU_SID_SHIFT 5 |
| |
| #define DMAC_STREAM_ID SR_SID_VAL(0x3, 0x0, 0x0) |
| #define DMAC_SID_SHIFT 5 |
| |
| /* DDR SHMOO Values defines */ |
| #define IDRAM_SHMOO_VALUES_ADDR CRMU_IDRAM_BASE_ADDR |
| #define DDR_SHMOO_VALUES_ADDR 0x8f103000 |
| #define SHMOO_SIZE_PER_CHANNEL 0x1000 |
| |
| #endif /* SR_DEF_H */ |