plat/arm/common/arm_dyn_cfg_helpers.c - filogic/atf - Gitiles

 /*
  * Copyright (c) 2018-2023, Arm Limited and Contributors. All rights reserved.
  *
  * SPDX-License-Identifier: BSD-3-Clause
  */

 #include <assert.h>

 #include <common/debug.h>
 #if MEASURED_BOOT
 #include <common/desc_image_load.h>
 #endif
 #include <common/fdt_wrappers.h>

 #include <lib/fconf/fconf.h>
 #include <lib/fconf/fconf_dyn_cfg_getter.h>
 #include <libfdt.h>

 #include <plat/arm/common/arm_dyn_cfg_helpers.h>
 #include <plat/arm/common/plat_arm.h>

 #define DTB_PROP_MBEDTLS_HEAP_ADDR "mbedtls_heap_addr"
 #define DTB_PROP_MBEDTLS_HEAP_SIZE "mbedtls_heap_size"

 #if MEASURED_BOOT
 #ifdef SPD_opteed
 /*
  * Currently OP-TEE does not support reading DTBs from Secure memory
  * and this property should be removed when this feature is supported.
  */
 #define DTB_PROP_HW_SM_LOG_ADDR		"tpm_event_log_sm_addr"
 #endif /* SPD_opteed */
 #define DTB_PROP_HW_LOG_ADDR		"tpm_event_log_addr"
 #define DTB_PROP_HW_LOG_SIZE    	"tpm_event_log_size"
 #define DTB_PROP_HW_LOG_MAX_SIZE	"tpm_event_log_max_size"
 #endif /* MEASURED_BOOT */

 static size_t event_log_max_size __unused;

 /*******************************************************************************
  * Validate the tb_fw_config is a valid DTB file and returns the node offset
  * to "arm,tb_fw" property.
  * Arguments:
  *	void *dtb - pointer to the TB_FW_CONFIG in memory
  *	int *node - Returns the node offset to "arm,tb_fw" property if found.
  *
  * Returns 0 on success and -1 on error.
  ******************************************************************************/
 int arm_dyn_tb_fw_cfg_init(void *dtb, int *node)
 {
 	assert(dtb != NULL);
 	assert(node != NULL);

 	/* Check if the pointer to DT is correct */
 	if (fdt_check_header(dtb) != 0) {
 		WARN("Invalid DTB file passed as%s\n", " TB_FW_CONFIG");
 		return -1;
 	}

 	/* Assert the node offset point to "arm,tb_fw" compatible property */
 	*node = fdt_node_offset_by_compatible(dtb, -1, "arm,tb_fw");
 	if (*node < 0) {
 		WARN("The compatible property '%s' not%s", "arm,tb_fw",
 			" found in the config\n");
 		return -1;
 	}

 	VERBOSE("Dyn cfg: '%s'%s", "arm,tb_fw", " found in the config\n");
 	return 0;
 }

 /*
  * This function writes the Mbed TLS heap address and size in the DTB. When it
  * is called, it is guaranteed that a DTB is available. However it is not
  * guaranteed that the shared Mbed TLS heap implementation is used. Thus we
  * return error code from here and it's the responsibility of the caller to
  * determine the action upon error.
  *
  * This function is supposed to be called only by BL1.
  *
  * Returns:
  *	0 = success
  *     -1 = error
  */
 int arm_set_dtb_mbedtls_heap_info(void *dtb, void *heap_addr, size_t heap_size)
 {
 	int dtb_root;

 	/*
 	 * Verify that the DTB is valid, before attempting to write to it,
 	 * and get the DTB root node.
 	 */
 	int err = arm_dyn_tb_fw_cfg_init(dtb, &dtb_root);
 	if (err < 0) {
 		ERROR("Invalid%s loaded. Unable to get root node\n",
 			" TB_FW_CONFIG");
 		return -1;
 	}

 	/*
 	 * Write the heap address and size in the DTB.
 	 *
 	 * NOTE: The variables heap_addr and heap_size are corrupted
 	 * by the "fdtw_write_inplace_cells" function. After the
 	 * function calls they must NOT be reused.
 	 */
 	err = fdtw_write_inplace_cells(dtb, dtb_root,
 		DTB_PROP_MBEDTLS_HEAP_ADDR, 2, &heap_addr);
 	if (err < 0) {
 		ERROR("%sDTB property '%s'\n",
 			"Unable to write ", DTB_PROP_MBEDTLS_HEAP_ADDR);
 		return -1;
 	}

 	err = fdtw_write_inplace_cells(dtb, dtb_root,
 		DTB_PROP_MBEDTLS_HEAP_SIZE, 1, &heap_size);
 	if (err < 0) {
 		ERROR("%sDTB property '%s'\n",
 			"Unable to write ", DTB_PROP_MBEDTLS_HEAP_SIZE);
 		return -1;
 	}

 	return 0;
 }

 #if MEASURED_BOOT
 /*
  * Write the Event Log address and its size in the DTB.
  *
  * Returns:
  *	0 = success
  *    < 0 = error
  */
 static int arm_set_event_log_info(uintptr_t config_base,
 #ifdef SPD_opteed
 				  uintptr_t sm_log_addr,
 #endif
 				  uintptr_t log_addr, size_t log_size)
 {
 	/* As libfdt uses void *, we can't avoid this cast */
 	void *dtb = (void *)config_base;
 	const char *compatible = "arm,tpm_event_log";
 	int err, node;

 	/*
 	 * Verify that the DTB is valid, before attempting to write to it,
 	 * and get the DTB root node.
 	 */

 	/* Check if the pointer to DT is correct */
 	err = fdt_check_header(dtb);
 	if (err < 0) {
 		WARN("Invalid DTB file passed\n");
 		return err;
 	}

 	/* Assert the node offset point to compatible property */
 	node = fdt_node_offset_by_compatible(dtb, -1, compatible);
 	if (node < 0) {
 		WARN("The compatible property '%s' not%s", compatible,
 			" found in the config\n");
 		return node;
 	}

 	VERBOSE("Dyn cfg: '%s'%s", compatible, " found in the config\n");

 #ifdef SPD_opteed
 	if (sm_log_addr != 0UL) {
 		err = fdtw_write_inplace_cells(dtb, node,
 			DTB_PROP_HW_SM_LOG_ADDR, 2, &sm_log_addr);
 		if (err < 0) {
 			ERROR("%sDTB property '%s'\n",
 				"Unable to write ", DTB_PROP_HW_SM_LOG_ADDR);
 			return err;
 		}
 	}
 #endif
 	err = fdtw_write_inplace_cells(dtb, node,
 		DTB_PROP_HW_LOG_ADDR, 2, &log_addr);
 	if (err < 0) {
 		ERROR("%sDTB property '%s'\n",
 			"Unable to write ", DTB_PROP_HW_LOG_ADDR);
 		return err;
 	}

 	assert(event_log_max_size != 0U);
 	err = fdtw_write_inplace_cells(dtb, node,
 				       DTB_PROP_HW_LOG_MAX_SIZE, 1,
 				       &event_log_max_size);
 	if (err < 0) {
 		ERROR("%sDTB property '%s'\n",
 		      "Unable to write ", DTB_PROP_HW_LOG_MAX_SIZE);
 		return err;
 	}

 	err = fdtw_write_inplace_cells(dtb, node,
 		DTB_PROP_HW_LOG_SIZE, 1, &log_size);
 	if (err < 0) {
 		ERROR("%sDTB property '%s'\n",
 			"Unable to write ", DTB_PROP_HW_LOG_SIZE);
 	} else {
 		/*
 		 * Ensure that the info written to the DTB is visible
 		 * to other images.
 		 */
 		flush_dcache_range(config_base, fdt_totalsize(dtb));
 	}

 	return err;
 }

 /*
  * This function writes the Event Log address and its size
  * in the TOS_FW_CONFIG DTB.
  *
  * This function is supposed to be called only by BL2.
  *
  * Returns:
  *	0 = success
  *    < 0 = error
  */
 int arm_set_tos_fw_info(uintptr_t log_addr, size_t log_size)
 {
 	uintptr_t config_base;
 	const bl_mem_params_node_t *cfg_mem_params;
 	int err;

 	assert(log_addr != 0UL);

 	/* Get the config load address and size of TOS_FW_CONFIG */
 	cfg_mem_params = get_bl_mem_params_node(TOS_FW_CONFIG_ID);
 	assert(cfg_mem_params != NULL);

 	config_base = cfg_mem_params->image_info.image_base;

 	/* Write the Event Log address and its size in the DTB */
 	err = arm_set_event_log_info(config_base,
 #ifdef SPD_opteed
 					0UL,
 #endif
 					log_addr, log_size);
 	if (err < 0) {
 		ERROR("%sEvent Log data to TOS_FW_CONFIG\n",
 					"Unable to write ");
 	}

 	return err;
 }

 /*
  * This function writes the Event Log address and its size
  * in the NT_FW_CONFIG DTB.
  *
  * This function is supposed to be called only by BL2.
  *
  * Returns:
  *	0 = success
  *    < 0 = error
  */
 int arm_set_nt_fw_info(
 #ifdef SPD_opteed
 			uintptr_t log_addr,
 #endif
 			size_t log_size, uintptr_t *ns_log_addr)
 {
 	uintptr_t config_base;
 	uintptr_t ns_addr;
 	const bl_mem_params_node_t *cfg_mem_params;
 	int err;

 	assert(ns_log_addr != NULL);

 	/* Get the config load address and size from NT_FW_CONFIG */
 	cfg_mem_params = get_bl_mem_params_node(NT_FW_CONFIG_ID);
 	assert(cfg_mem_params != NULL);

 	config_base = cfg_mem_params->image_info.image_base;

 	/* Calculate Event Log address in Non-secure memory */
 	ns_addr = cfg_mem_params->image_info.image_base +
 			cfg_mem_params->image_info.image_max_size;

 	/* Check for memory space */
 	if ((uint64_t)(ns_addr + log_size) > ARM_NS_DRAM1_END) {
 		return -1;
 	}

 	/* Write the Event Log address and its size in the DTB */
 	err = arm_set_event_log_info(config_base,
 #ifdef SPD_opteed
 					log_addr,
 #endif
 					ns_addr, log_size);

 	/* Return Event Log address in Non-secure memory */
 	*ns_log_addr = (err < 0) ? 0UL : ns_addr;
 	return err;
 }

 /*
  * This function writes the Event Log address and its size
  * in the TB_FW_CONFIG DTB.
  *
  * This function is supposed to be called only by BL1.
  *
  * Returns:
  *     0 = success
  *   < 0 = error
  */
 int arm_set_tb_fw_info(uintptr_t log_addr, size_t log_size, size_t log_max_size)
 {
 	/*
 	 * Read tb_fw_config device tree for Event Log properties
 	 * and write the Event Log address and its size in the DTB
 	 */
 	const struct dyn_cfg_dtb_info_t *tb_fw_config_info;
 	uintptr_t tb_fw_cfg_dtb;
 	int err;

 	tb_fw_config_info = FCONF_GET_PROPERTY(dyn_cfg, dtb, TB_FW_CONFIG_ID);
 	assert(tb_fw_config_info != NULL);

 	tb_fw_cfg_dtb = tb_fw_config_info->config_addr;

 	event_log_max_size = log_max_size;

 	err = arm_set_event_log_info(tb_fw_cfg_dtb,
 #ifdef SPD_opteed
 				     0UL,
 #endif
 				     log_addr, log_size);
 	return err;
 }

 /*
  * This function reads the Event Log address and its size
  * properties present in TB_FW_CONFIG DTB.
  *
  * This function is supposed to be called only by BL2.
  *
  * Returns:
  *     0 = success
  *   < 0 = error
  * Alongside returns Event Log address and its size.
  */

 int arm_get_tb_fw_info(uint64_t *log_addr, size_t *log_size,
 		       size_t *log_max_size)
 {
 	/* As libfdt uses void *, we can't avoid this cast */
 	const struct dyn_cfg_dtb_info_t *tb_fw_config_info;
 	int node, rc;

 	tb_fw_config_info = FCONF_GET_PROPERTY(dyn_cfg, dtb, TB_FW_CONFIG_ID);
 	assert(tb_fw_config_info != NULL);

 	void *dtb = (void *)tb_fw_config_info->config_addr;
 	const char *compatible = "arm,tpm_event_log";

 	/* Assert the node offset point to compatible property */
 	node = fdt_node_offset_by_compatible(dtb, -1, compatible);
 	if (node < 0) {
 		WARN("The compatible property '%s'%s", compatible,
 		     " not specified in TB_FW config.\n");
 		return node;
 	}

 	VERBOSE("Dyn cfg: '%s'%s", compatible, " found in the config\n");

 	rc = fdt_read_uint64(dtb, node, DTB_PROP_HW_LOG_ADDR, log_addr);
 	if (rc != 0) {
 		ERROR("%s%s", DTB_PROP_HW_LOG_ADDR,
 		      " not specified in TB_FW config.\n");
 		return rc;
 	}

 	rc = fdt_read_uint32(dtb, node, DTB_PROP_HW_LOG_SIZE, (uint32_t *)log_size);
 	if (rc != 0) {
 		ERROR("%s%s", DTB_PROP_HW_LOG_SIZE,
 		      " not specified in TB_FW config.\n");
 		return rc;
 	}

 	rc = fdt_read_uint32(dtb, node, DTB_PROP_HW_LOG_MAX_SIZE,
 			     (uint32_t *)log_max_size);
 	if (rc != 0) {
 		ERROR("%s%s", DTB_PROP_HW_LOG_MAX_SIZE,
 		      " not specified in TB_FW config.\n");
 		return rc;
 	} else {
 		event_log_max_size = *log_max_size;
 	}

 	return rc;
 }
 #endif /* MEASURED_BOOT */
	/*
	* Copyright (c) 2018-2023, Arm Limited and Contributors. All rights reserved.
	*
	* SPDX-License-Identifier: BSD-3-Clause
	*/

	#include <assert.h>

	#include <common/debug.h>
	#if MEASURED_BOOT
	#include <common/desc_image_load.h>
	#endif
	#include <common/fdt_wrappers.h>

	#include <lib/fconf/fconf.h>
	#include <lib/fconf/fconf_dyn_cfg_getter.h>
	#include <libfdt.h>

	#include <plat/arm/common/arm_dyn_cfg_helpers.h>
	#include <plat/arm/common/plat_arm.h>

	#define DTB_PROP_MBEDTLS_HEAP_ADDR "mbedtls_heap_addr"
	#define DTB_PROP_MBEDTLS_HEAP_SIZE "mbedtls_heap_size"

	#if MEASURED_BOOT
	#ifdef SPD_opteed
	/*
	* Currently OP-TEE does not support reading DTBs from Secure memory
	* and this property should be removed when this feature is supported.
	*/
	#define DTB_PROP_HW_SM_LOG_ADDR "tpm_event_log_sm_addr"
	#endif /* SPD_opteed */
	#define DTB_PROP_HW_LOG_ADDR "tpm_event_log_addr"
	#define DTB_PROP_HW_LOG_SIZE "tpm_event_log_size"
	#define DTB_PROP_HW_LOG_MAX_SIZE "tpm_event_log_max_size"
	#endif /* MEASURED_BOOT */

	static size_t event_log_max_size __unused;

	/*******************************************************************************
	* Validate the tb_fw_config is a valid DTB file and returns the node offset
	* to "arm,tb_fw" property.
	* Arguments:
	* void *dtb - pointer to the TB_FW_CONFIG in memory
	* int *node - Returns the node offset to "arm,tb_fw" property if found.
	*
	* Returns 0 on success and -1 on error.
	******************************************************************************/
	int arm_dyn_tb_fw_cfg_init(void dtb, int node)
	{
	assert(dtb != NULL);
	assert(node != NULL);

	/* Check if the pointer to DT is correct */
	if (fdt_check_header(dtb) != 0) {
	WARN("Invalid DTB file passed as%s\n", " TB_FW_CONFIG");
	return -1;
	}

	/* Assert the node offset point to "arm,tb_fw" compatible property */
	*node = fdt_node_offset_by_compatible(dtb, -1, "arm,tb_fw");
	if (*node < 0) {
	WARN("The compatible property '%s' not%s", "arm,tb_fw",
	" found in the config\n");
	return -1;
	}

	VERBOSE("Dyn cfg: '%s'%s", "arm,tb_fw", " found in the config\n");
	return 0;
	}

	/*
	* This function writes the Mbed TLS heap address and size in the DTB. When it
	* is called, it is guaranteed that a DTB is available. However it is not
	* guaranteed that the shared Mbed TLS heap implementation is used. Thus we
	* return error code from here and it's the responsibility of the caller to
	* determine the action upon error.
	*
	* This function is supposed to be called only by BL1.
	*
	* Returns:
	* 0 = success
	* -1 = error
	*/
	int arm_set_dtb_mbedtls_heap_info(void dtb, void heap_addr, size_t heap_size)
	{
	int dtb_root;

	/*
	* Verify that the DTB is valid, before attempting to write to it,
	* and get the DTB root node.
	*/
	int err = arm_dyn_tb_fw_cfg_init(dtb, &dtb_root);
	if (err < 0) {
	ERROR("Invalid%s loaded. Unable to get root node\n",
	" TB_FW_CONFIG");
	return -1;
	}

	/*
	* Write the heap address and size in the DTB.
	*
	* NOTE: The variables heap_addr and heap_size are corrupted
	* by the "fdtw_write_inplace_cells" function. After the
	* function calls they must NOT be reused.
	*/
	err = fdtw_write_inplace_cells(dtb, dtb_root,
	DTB_PROP_MBEDTLS_HEAP_ADDR, 2, &heap_addr);
	if (err < 0) {
	ERROR("%sDTB property '%s'\n",
	"Unable to write ", DTB_PROP_MBEDTLS_HEAP_ADDR);
	return -1;
	}

	err = fdtw_write_inplace_cells(dtb, dtb_root,
	DTB_PROP_MBEDTLS_HEAP_SIZE, 1, &heap_size);
	if (err < 0) {
	ERROR("%sDTB property '%s'\n",
	"Unable to write ", DTB_PROP_MBEDTLS_HEAP_SIZE);
	return -1;
	}

	return 0;
	}

	#if MEASURED_BOOT
	/*
	* Write the Event Log address and its size in the DTB.
	*
	* Returns:
	* 0 = success
	* < 0 = error
	*/
	static int arm_set_event_log_info(uintptr_t config_base,
	#ifdef SPD_opteed
	uintptr_t sm_log_addr,
	#endif
	uintptr_t log_addr, size_t log_size)
	{
	/* As libfdt uses void , we can't avoid this cast /
	void dtb = (void )config_base;
	const char *compatible = "arm,tpm_event_log";
	int err, node;

	/*
	* Verify that the DTB is valid, before attempting to write to it,
	* and get the DTB root node.
	*/

	/* Check if the pointer to DT is correct */
	err = fdt_check_header(dtb);
	if (err < 0) {
	WARN("Invalid DTB file passed\n");
	return err;
	}

	/* Assert the node offset point to compatible property */
	node = fdt_node_offset_by_compatible(dtb, -1, compatible);
	if (node < 0) {
	WARN("The compatible property '%s' not%s", compatible,
	" found in the config\n");
	return node;
	}

	VERBOSE("Dyn cfg: '%s'%s", compatible, " found in the config\n");

	#ifdef SPD_opteed
	if (sm_log_addr != 0UL) {
	err = fdtw_write_inplace_cells(dtb, node,
	DTB_PROP_HW_SM_LOG_ADDR, 2, &sm_log_addr);
	if (err < 0) {
	ERROR("%sDTB property '%s'\n",
	"Unable to write ", DTB_PROP_HW_SM_LOG_ADDR);
	return err;
	}
	}
	#endif
	err = fdtw_write_inplace_cells(dtb, node,
	DTB_PROP_HW_LOG_ADDR, 2, &log_addr);
	if (err < 0) {
	ERROR("%sDTB property '%s'\n",
	"Unable to write ", DTB_PROP_HW_LOG_ADDR);
	return err;
	}

	assert(event_log_max_size != 0U);
	err = fdtw_write_inplace_cells(dtb, node,
	DTB_PROP_HW_LOG_MAX_SIZE, 1,
	&event_log_max_size);
	if (err < 0) {
	ERROR("%sDTB property '%s'\n",
	"Unable to write ", DTB_PROP_HW_LOG_MAX_SIZE);
	return err;
	}

	err = fdtw_write_inplace_cells(dtb, node,
	DTB_PROP_HW_LOG_SIZE, 1, &log_size);
	if (err < 0) {
	ERROR("%sDTB property '%s'\n",
	"Unable to write ", DTB_PROP_HW_LOG_SIZE);
	} else {
	/*
	* Ensure that the info written to the DTB is visible
	* to other images.
	*/
	flush_dcache_range(config_base, fdt_totalsize(dtb));
	}

	return err;
	}

	/*
	* This function writes the Event Log address and its size
	* in the TOS_FW_CONFIG DTB.
	*
	* This function is supposed to be called only by BL2.
	*
	* Returns:
	* 0 = success
	* < 0 = error
	*/
	int arm_set_tos_fw_info(uintptr_t log_addr, size_t log_size)
	{
	uintptr_t config_base;
	const bl_mem_params_node_t *cfg_mem_params;
	int err;

	assert(log_addr != 0UL);

	/* Get the config load address and size of TOS_FW_CONFIG */
	cfg_mem_params = get_bl_mem_params_node(TOS_FW_CONFIG_ID);
	assert(cfg_mem_params != NULL);

	config_base = cfg_mem_params->image_info.image_base;

	/* Write the Event Log address and its size in the DTB */
	err = arm_set_event_log_info(config_base,
	#ifdef SPD_opteed
	0UL,
	#endif
	log_addr, log_size);
	if (err < 0) {
	ERROR("%sEvent Log data to TOS_FW_CONFIG\n",
	"Unable to write ");
	}

	return err;
	}

	/*
	* This function writes the Event Log address and its size
	* in the NT_FW_CONFIG DTB.
	*
	* This function is supposed to be called only by BL2.
	*
	* Returns:
	* 0 = success
	* < 0 = error
	*/
	int arm_set_nt_fw_info(
	#ifdef SPD_opteed
	uintptr_t log_addr,
	#endif
	size_t log_size, uintptr_t *ns_log_addr)
	{
	uintptr_t config_base;
	uintptr_t ns_addr;
	const bl_mem_params_node_t *cfg_mem_params;
	int err;

	assert(ns_log_addr != NULL);

	/* Get the config load address and size from NT_FW_CONFIG */
	cfg_mem_params = get_bl_mem_params_node(NT_FW_CONFIG_ID);
	assert(cfg_mem_params != NULL);

	config_base = cfg_mem_params->image_info.image_base;

	/* Calculate Event Log address in Non-secure memory */
	ns_addr = cfg_mem_params->image_info.image_base +
	cfg_mem_params->image_info.image_max_size;

	/* Check for memory space */
	if ((uint64_t)(ns_addr + log_size) > ARM_NS_DRAM1_END) {
	return -1;
	}

	/* Write the Event Log address and its size in the DTB */
	err = arm_set_event_log_info(config_base,
	#ifdef SPD_opteed
	log_addr,
	#endif
	ns_addr, log_size);

	/* Return Event Log address in Non-secure memory */
	*ns_log_addr = (err < 0) ? 0UL : ns_addr;
	return err;
	}

	/*
	* This function writes the Event Log address and its size
	* in the TB_FW_CONFIG DTB.
	*
	* This function is supposed to be called only by BL1.
	*
	* Returns:
	* 0 = success
	* < 0 = error
	*/
	int arm_set_tb_fw_info(uintptr_t log_addr, size_t log_size, size_t log_max_size)
	{
	/*
	* Read tb_fw_config device tree for Event Log properties
	* and write the Event Log address and its size in the DTB
	*/
	const struct dyn_cfg_dtb_info_t *tb_fw_config_info;
	uintptr_t tb_fw_cfg_dtb;
	int err;

	tb_fw_config_info = FCONF_GET_PROPERTY(dyn_cfg, dtb, TB_FW_CONFIG_ID);
	assert(tb_fw_config_info != NULL);

	tb_fw_cfg_dtb = tb_fw_config_info->config_addr;

	event_log_max_size = log_max_size;

	err = arm_set_event_log_info(tb_fw_cfg_dtb,
	#ifdef SPD_opteed
	0UL,
	#endif
	log_addr, log_size);
	return err;
	}

	/*
	* This function reads the Event Log address and its size
	* properties present in TB_FW_CONFIG DTB.
	*
	* This function is supposed to be called only by BL2.
	*
	* Returns:
	* 0 = success
	* < 0 = error
	* Alongside returns Event Log address and its size.
	*/

	int arm_get_tb_fw_info(uint64_t log_addr, size_t log_size,
	size_t *log_max_size)
	{
	/* As libfdt uses void , we can't avoid this cast /
	const struct dyn_cfg_dtb_info_t *tb_fw_config_info;
	int node, rc;

	tb_fw_config_info = FCONF_GET_PROPERTY(dyn_cfg, dtb, TB_FW_CONFIG_ID);
	assert(tb_fw_config_info != NULL);

	void dtb = (void )tb_fw_config_info->config_addr;
	const char *compatible = "arm,tpm_event_log";

	/* Assert the node offset point to compatible property */
	node = fdt_node_offset_by_compatible(dtb, -1, compatible);
	if (node < 0) {
	WARN("The compatible property '%s'%s", compatible,
	" not specified in TB_FW config.\n");
	return node;
	}

	VERBOSE("Dyn cfg: '%s'%s", compatible, " found in the config\n");

	rc = fdt_read_uint64(dtb, node, DTB_PROP_HW_LOG_ADDR, log_addr);
	if (rc != 0) {
	ERROR("%s%s", DTB_PROP_HW_LOG_ADDR,
	" not specified in TB_FW config.\n");
	return rc;
	}

	rc = fdt_read_uint32(dtb, node, DTB_PROP_HW_LOG_SIZE, (uint32_t *)log_size);
	if (rc != 0) {
	ERROR("%s%s", DTB_PROP_HW_LOG_SIZE,
	" not specified in TB_FW config.\n");
	return rc;
	}

	rc = fdt_read_uint32(dtb, node, DTB_PROP_HW_LOG_MAX_SIZE,
	(uint32_t *)log_max_size);
	if (rc != 0) {
	ERROR("%s%s", DTB_PROP_HW_LOG_MAX_SIZE,
	" not specified in TB_FW config.\n");
	return rc;
	} else {
	event_log_max_size = *log_max_size;
	}

	return rc;
	}
	#endif /* MEASURED_BOOT */