plat/hisilicon/poplar/bl2_plat_setup.c - filogic/atf - Gitiles

 /*
  * Copyright (c) 2017, ARM Limited and Contributors. All rights reserved.
  *
  * SPDX-License-Identifier: BSD-3-Clause
  */

 #include <arch_helpers.h>
 #include <assert.h>
 #include <bl_common.h>
 #include <console.h>
 #include <debug.h>
 #include <desc_image_load.h>
 #include <dw_mmc.h>
 #include <errno.h>
 #include <generic_delay_timer.h>
 #include <mmc.h>
 #include <mmio.h>
 #include <optee_utils.h>
 #include <partition/partition.h>
 #include <platform.h>
 #include <string.h>
 #include "hi3798cv200.h"
 #include "plat_private.h"

 /* Memory ranges for code and read only data sections */
 #define BL2_RO_BASE	(unsigned long)(&__RO_START__)
 #define BL2_RO_LIMIT	(unsigned long)(&__RO_END__)

 /* Memory ranges for coherent memory section */
 #define BL2_COHERENT_RAM_BASE	(unsigned long)(&__COHERENT_RAM_START__)
 #define BL2_COHERENT_RAM_LIMIT	(unsigned long)(&__COHERENT_RAM_END__)

 static meminfo_t bl2_tzram_layout __aligned(CACHE_WRITEBACK_GRANULE);

 #if !LOAD_IMAGE_V2

 /*******************************************************************************
  * This structure represents the superset of information that is passed to
  * BL31, e.g. while passing control to it from BL2, bl31_params
  * and other platform specific params
  ******************************************************************************/
 typedef struct bl2_to_bl31_params_mem {
 	bl31_params_t		bl31_params;
 	image_info_t		bl31_image_info;
 	image_info_t		bl32_image_info;
 	image_info_t		bl33_image_info;
 	entry_point_info_t	bl33_ep_info;
 	entry_point_info_t	bl32_ep_info;
 	entry_point_info_t	bl31_ep_info;
 } bl2_to_bl31_params_mem_t;

 static bl2_to_bl31_params_mem_t bl31_params_mem;

 meminfo_t *bl2_plat_sec_mem_layout(void)
 {
 	return &bl2_tzram_layout;
 }

 #ifdef SCP_BL2_BASE
 void bl2_plat_get_scp_bl2_meminfo(meminfo_t *scp_bl2_meminfo)
 {
 	/*
 	 * This platform has no SCP_BL2 yet
 	 */
 }
 #endif
 #endif /* LOAD_IMAGE_V2 */

 /*******************************************************************************
  * Transfer SCP_BL2 from Trusted RAM using the SCP Download protocol.
  * Return 0 on success, -1 otherwise.
  ******************************************************************************/
 #if LOAD_IMAGE_V2
 int plat_poplar_bl2_handle_scp_bl2(image_info_t *scp_bl2_image_info)
 #else
 int bl2_plat_handle_scp_bl2(struct image_info *scp_bl2_image_info)
 #endif
 {
 	/*
 	 * This platform has no SCP_BL2 yet
 	 */
 	return 0;
 }

 /*******************************************************************************
  * Gets SPSR for BL32 entry
  ******************************************************************************/
 uint32_t poplar_get_spsr_for_bl32_entry(void)
 {
 	/*
 	 * The Secure Payload Dispatcher service is responsible for
 	 * setting the SPSR prior to entry into the BL3-2 image.
 	 */
 	return 0;
 }

 /*******************************************************************************
  * Gets SPSR for BL33 entry
  ******************************************************************************/
 #ifndef AARCH32
 uint32_t poplar_get_spsr_for_bl33_entry(void)
 {
 	unsigned long el_status;
 	unsigned int mode;
 	uint32_t spsr;

 	/* Figure out what mode we enter the non-secure world in */
 	el_status = read_id_aa64pfr0_el1() >> ID_AA64PFR0_EL2_SHIFT;
 	el_status &= ID_AA64PFR0_ELX_MASK;

 	mode = (el_status) ? MODE_EL2 : MODE_EL1;

 	/*
 	 * TODO: Consider the possibility of specifying the SPSR in
 	 * the FIP ToC and allowing the platform to have a say as
 	 * well.
 	 */
 	spsr = SPSR_64(mode, MODE_SP_ELX, DISABLE_ALL_EXCEPTIONS);
 	return spsr;
 }
 #else
 uint32_t poplar_get_spsr_for_bl33_entry(void)
 {
 	unsigned int hyp_status, mode, spsr;

 	hyp_status = GET_VIRT_EXT(read_id_pfr1());

 	mode = (hyp_status) ? MODE32_hyp : MODE32_svc;

 	/*
 	 * TODO: Consider the possibility of specifying the SPSR in
 	 * the FIP ToC and allowing the platform to have a say as
 	 * well.
 	 */
 	spsr = SPSR_MODE32(mode, plat_get_ns_image_entrypoint() & 0x1,
 			SPSR_E_LITTLE, DISABLE_ALL_EXCEPTIONS);
 	return spsr;
 }
 #endif /* AARCH32 */

 #if LOAD_IMAGE_V2
 int poplar_bl2_handle_post_image_load(unsigned int image_id)
 {
 	int err = 0;
 	bl_mem_params_node_t *bl_mem_params = get_bl_mem_params_node(image_id);
 #ifdef SPD_opteed
 	bl_mem_params_node_t *pager_mem_params = NULL;
 	bl_mem_params_node_t *paged_mem_params = NULL;
 #endif

 	assert(bl_mem_params);

 	switch (image_id) {
 #ifdef AARCH64
 	case BL32_IMAGE_ID:
 #ifdef SPD_opteed
 		pager_mem_params = get_bl_mem_params_node(BL32_EXTRA1_IMAGE_ID);
 		assert(pager_mem_params);

 		paged_mem_params = get_bl_mem_params_node(BL32_EXTRA2_IMAGE_ID);
 		assert(paged_mem_params);

 		err = parse_optee_header(&bl_mem_params->ep_info,
 				&pager_mem_params->image_info,
 				&paged_mem_params->image_info);
 		if (err != 0) {
 			WARN("OPTEE header parse error.\n");
 		}

 		/*
 		 * OP-TEE expect to receive DTB address in x2.
 		 * This will be copied into x2 by dispatcher.
 		 * Set this (arg3) if necessary
 		 */
 		/* bl_mem_params->ep_info.args.arg3 = PLAT_HIKEY_DT_BASE; */
 #endif
 		bl_mem_params->ep_info.spsr = poplar_get_spsr_for_bl32_entry();
 		break;
 #endif

 	case BL33_IMAGE_ID:
 		/* BL33 expects to receive the primary CPU MPID (through r0) */
 		bl_mem_params->ep_info.args.arg0 = 0xffff & read_mpidr();
 		bl_mem_params->ep_info.spsr = poplar_get_spsr_for_bl33_entry();
 		break;

 #ifdef SCP_BL2_BASE
 	case SCP_BL2_IMAGE_ID:
 		/* The subsequent handling of SCP_BL2 is platform specific */
 		err = plat_poplar_bl2_handle_scp_bl2(&bl_mem_params->image_info);
 		if (err) {
 			WARN("Failure in platform-specific handling of SCP_BL2 image.\n");
 		}
 		break;
 #endif
 	default:
 		/* Do nothing in default case */
 		break;
 	}

 	return err;
 }

 /*******************************************************************************
  * This function can be used by the platforms to update/use image
  * information for given `image_id`.
  ******************************************************************************/
 int bl2_plat_handle_post_image_load(unsigned int image_id)
 {
 	return poplar_bl2_handle_post_image_load(image_id);
 }

 #else /* LOAD_IMAGE_V2 */

 bl31_params_t *bl2_plat_get_bl31_params(void)
 {
 	bl31_params_t *bl2_to_bl31_params = NULL;

 	/*
 	 * Initialise the memory for all the arguments that needs to
 	 * be passed to BL3-1
 	 */
 	memset(&bl31_params_mem, 0, sizeof(bl2_to_bl31_params_mem_t));

 	/* Assign memory for TF related information */
 	bl2_to_bl31_params = &bl31_params_mem.bl31_params;
 	SET_PARAM_HEAD(bl2_to_bl31_params, PARAM_BL31, VERSION_1, 0);

 	/* Fill BL3-1 related information */
 	bl2_to_bl31_params->bl31_image_info = &bl31_params_mem.bl31_image_info;
 	SET_PARAM_HEAD(bl2_to_bl31_params->bl31_image_info,
 		       PARAM_IMAGE_BINARY, VERSION_1, 0);

 	/* Fill BL3-2 related information if it exists */
 #ifdef BL32_BASE
 	bl2_to_bl31_params->bl32_ep_info = &bl31_params_mem.bl32_ep_info;
 	SET_PARAM_HEAD(bl2_to_bl31_params->bl32_ep_info, PARAM_EP,
 		VERSION_1, 0);
 	bl2_to_bl31_params->bl32_image_info = &bl31_params_mem.bl32_image_info;
 	SET_PARAM_HEAD(bl2_to_bl31_params->bl32_image_info, PARAM_IMAGE_BINARY,
 		VERSION_1, 0);
 #endif

 	/* Fill BL3-3 related information */
 	bl2_to_bl31_params->bl33_ep_info = &bl31_params_mem.bl33_ep_info;
 	SET_PARAM_HEAD(bl2_to_bl31_params->bl33_ep_info,
 		       PARAM_EP, VERSION_1, 0);

 	/* BL3-3 expects to receive the primary CPU MPID (through x0) */
 	bl2_to_bl31_params->bl33_ep_info->args.arg0 = 0xffff & read_mpidr();

 	bl2_to_bl31_params->bl33_image_info = &bl31_params_mem.bl33_image_info;
 	SET_PARAM_HEAD(bl2_to_bl31_params->bl33_image_info,
 		       PARAM_IMAGE_BINARY, VERSION_1, 0);

 	return bl2_to_bl31_params;
 }

 struct entry_point_info *bl2_plat_get_bl31_ep_info(void)
 {
 #if DEBUG
 	bl31_params_mem.bl31_ep_info.args.arg1 = POPLAR_BL31_PLAT_PARAM_VAL;
 #endif

 	return &bl31_params_mem.bl31_ep_info;
 }

 void bl2_plat_set_bl31_ep_info(image_info_t *image,
 			       entry_point_info_t *bl31_ep_info)
 {
 	SET_SECURITY_STATE(bl31_ep_info->h.attr, SECURE);
 	bl31_ep_info->spsr = SPSR_64(MODE_EL3, MODE_SP_ELX,
 				     DISABLE_ALL_EXCEPTIONS);
 }

 /*******************************************************************************
  * Before calling this function BL32 is loaded in memory and its entrypoint
  * is set by load_image. This is a placeholder for the platform to change
  * the entrypoint of BL32 and set SPSR and security state.
  * On Poplar we only set the security state of the entrypoint
  ******************************************************************************/
 #ifdef BL32_BASE
 void bl2_plat_set_bl32_ep_info(image_info_t *bl32_image_info,
 					entry_point_info_t *bl32_ep_info)
 {
 	SET_SECURITY_STATE(bl32_ep_info->h.attr, SECURE);
 	/*
 	 * The Secure Payload Dispatcher service is responsible for
 	 * setting the SPSR prior to entry into the BL32 image.
 	 */
 	bl32_ep_info->spsr = 0;
 }

 /*******************************************************************************
  * Populate the extents of memory available for loading BL32
  ******************************************************************************/
 void bl2_plat_get_bl32_meminfo(meminfo_t *bl32_meminfo)
 {
 	/*
 	 * Populate the extents of memory available for loading BL32.
 	 */
 	bl32_meminfo->total_base = BL32_BASE;
 	bl32_meminfo->free_base = BL32_BASE;
 	bl32_meminfo->total_size =
 			(TSP_SEC_MEM_BASE + TSP_SEC_MEM_SIZE) - BL32_BASE;
 	bl32_meminfo->free_size =
 			(TSP_SEC_MEM_BASE + TSP_SEC_MEM_SIZE) - BL32_BASE;
 }
 #endif /* BL32_BASE */

 void bl2_plat_set_bl33_ep_info(image_info_t *image,
 			       entry_point_info_t *bl33_ep_info)
 {
 	SET_SECURITY_STATE(bl33_ep_info->h.attr, NON_SECURE);
 	bl33_ep_info->spsr = poplar_get_spsr_for_bl33_entry();
 	bl33_ep_info->args.arg2 = image->image_size;
 }

 void bl2_plat_flush_bl31_params(void)
 {
 	flush_dcache_range((unsigned long)&bl31_params_mem,
 			   sizeof(bl2_to_bl31_params_mem_t));
 }

 void bl2_plat_get_bl33_meminfo(meminfo_t *bl33_meminfo)
 {
 	bl33_meminfo->total_base = DDR_BASE;
 	bl33_meminfo->total_size = DDR_SIZE;
 	bl33_meminfo->free_base  = DDR_BASE;
 	bl33_meminfo->free_size  = DDR_SIZE;
 }
 #endif /* LOAD_IMAGE_V2 */

 void bl2_early_platform_setup(meminfo_t *mem_layout)
 {
 #if !POPLAR_RECOVERY
 	struct mmc_device_info info;

 	dw_mmc_params_t params = EMMC_INIT_PARAMS(POPLAR_EMMC_DESC_BASE);
 #endif

 	console_init(PL011_UART0_BASE, PL011_UART0_CLK_IN_HZ, PL011_BAUDRATE);

 	/* Enable arch timer */
 	generic_delay_timer_init();

 	bl2_tzram_layout = *mem_layout;

 #if !POPLAR_RECOVERY
 	/* SoC-specific emmc register are initialized/configured by bootrom */
 	INFO("BL2: initializing emmc\n");
 	info.mmc_dev_type = MMC_IS_EMMC;
 	dw_mmc_init(&params, &info);
 #endif

 	plat_io_setup();
 }

 void bl2_plat_arch_setup(void)
 {
 	plat_configure_mmu_el1(bl2_tzram_layout.total_base,
 			       bl2_tzram_layout.total_size,
 			       BL2_RO_BASE,
 			       BL2_RO_LIMIT,
 			       BL2_COHERENT_RAM_BASE,
 			       BL2_COHERENT_RAM_LIMIT);
 }

 void bl2_platform_setup(void)
 {
 }

 uintptr_t plat_get_ns_image_entrypoint(void)
 {
 #ifdef PRELOADED_BL33_BASE
 	return PRELOADED_BL33_BASE;
 #else
 	return PLAT_POPLAR_NS_IMAGE_OFFSET;
 #endif
 }
	/*
	* Copyright (c) 2017, ARM Limited and Contributors. All rights reserved.
	*
	* SPDX-License-Identifier: BSD-3-Clause
	*/

	#include <arch_helpers.h>
	#include <assert.h>
	#include <bl_common.h>
	#include <console.h>
	#include <debug.h>
	#include <desc_image_load.h>
	#include <dw_mmc.h>
	#include <errno.h>
	#include <generic_delay_timer.h>
	#include <mmc.h>
	#include <mmio.h>
	#include <optee_utils.h>
	#include <partition/partition.h>
	#include <platform.h>
	#include <string.h>
	#include "hi3798cv200.h"
	#include "plat_private.h"

	/* Memory ranges for code and read only data sections */
	#define BL2_RO_BASE (unsigned long)(&__RO_START__)
	#define BL2_RO_LIMIT (unsigned long)(&__RO_END__)

	/* Memory ranges for coherent memory section */
	#define BL2_COHERENT_RAM_BASE (unsigned long)(&__COHERENT_RAM_START__)
	#define BL2_COHERENT_RAM_LIMIT (unsigned long)(&__COHERENT_RAM_END__)

	static meminfo_t bl2_tzram_layout __aligned(CACHE_WRITEBACK_GRANULE);

	#if !LOAD_IMAGE_V2

	/*******************************************************************************
	* This structure represents the superset of information that is passed to
	* BL31, e.g. while passing control to it from BL2, bl31_params
	* and other platform specific params
	******************************************************************************/
	typedef struct bl2_to_bl31_params_mem {
	bl31_params_t bl31_params;
	image_info_t bl31_image_info;
	image_info_t bl32_image_info;
	image_info_t bl33_image_info;
	entry_point_info_t bl33_ep_info;
	entry_point_info_t bl32_ep_info;
	entry_point_info_t bl31_ep_info;
	} bl2_to_bl31_params_mem_t;

	static bl2_to_bl31_params_mem_t bl31_params_mem;

	meminfo_t *bl2_plat_sec_mem_layout(void)
	{
	return &bl2_tzram_layout;
	}

	#ifdef SCP_BL2_BASE
	void bl2_plat_get_scp_bl2_meminfo(meminfo_t *scp_bl2_meminfo)
	{
	/*
	* This platform has no SCP_BL2 yet
	*/
	}
	#endif
	#endif /* LOAD_IMAGE_V2 */

	/*******************************************************************************
	* Transfer SCP_BL2 from Trusted RAM using the SCP Download protocol.
	* Return 0 on success, -1 otherwise.
	******************************************************************************/
	#if LOAD_IMAGE_V2
	int plat_poplar_bl2_handle_scp_bl2(image_info_t *scp_bl2_image_info)
	#else
	int bl2_plat_handle_scp_bl2(struct image_info *scp_bl2_image_info)
	#endif
	{
	/*
	* This platform has no SCP_BL2 yet
	*/
	return 0;
	}

	/*******************************************************************************
	* Gets SPSR for BL32 entry
	******************************************************************************/
	uint32_t poplar_get_spsr_for_bl32_entry(void)
	{
	/*
	* The Secure Payload Dispatcher service is responsible for
	* setting the SPSR prior to entry into the BL3-2 image.
	*/
	return 0;
	}

	/*******************************************************************************
	* Gets SPSR for BL33 entry
	******************************************************************************/
	#ifndef AARCH32
	uint32_t poplar_get_spsr_for_bl33_entry(void)
	{
	unsigned long el_status;
	unsigned int mode;
	uint32_t spsr;

	/* Figure out what mode we enter the non-secure world in */
	el_status = read_id_aa64pfr0_el1() >> ID_AA64PFR0_EL2_SHIFT;
	el_status &= ID_AA64PFR0_ELX_MASK;

	mode = (el_status) ? MODE_EL2 : MODE_EL1;

	/*
	* TODO: Consider the possibility of specifying the SPSR in
	* the FIP ToC and allowing the platform to have a say as
	* well.
	*/
	spsr = SPSR_64(mode, MODE_SP_ELX, DISABLE_ALL_EXCEPTIONS);
	return spsr;
	}
	#else
	uint32_t poplar_get_spsr_for_bl33_entry(void)
	{
	unsigned int hyp_status, mode, spsr;

	hyp_status = GET_VIRT_EXT(read_id_pfr1());

	mode = (hyp_status) ? MODE32_hyp : MODE32_svc;

	/*
	* TODO: Consider the possibility of specifying the SPSR in
	* the FIP ToC and allowing the platform to have a say as
	* well.
	*/
	spsr = SPSR_MODE32(mode, plat_get_ns_image_entrypoint() & 0x1,
	SPSR_E_LITTLE, DISABLE_ALL_EXCEPTIONS);
	return spsr;
	}
	#endif /* AARCH32 */

	#if LOAD_IMAGE_V2
	int poplar_bl2_handle_post_image_load(unsigned int image_id)
	{
	int err = 0;
	bl_mem_params_node_t *bl_mem_params = get_bl_mem_params_node(image_id);
	#ifdef SPD_opteed
	bl_mem_params_node_t *pager_mem_params = NULL;
	bl_mem_params_node_t *paged_mem_params = NULL;
	#endif

	assert(bl_mem_params);

	switch (image_id) {
	#ifdef AARCH64
	case BL32_IMAGE_ID:
	#ifdef SPD_opteed
	pager_mem_params = get_bl_mem_params_node(BL32_EXTRA1_IMAGE_ID);
	assert(pager_mem_params);

	paged_mem_params = get_bl_mem_params_node(BL32_EXTRA2_IMAGE_ID);
	assert(paged_mem_params);

	err = parse_optee_header(&bl_mem_params->ep_info,
	&pager_mem_params->image_info,
	&paged_mem_params->image_info);
	if (err != 0) {
	WARN("OPTEE header parse error.\n");
	}

	/*
	* OP-TEE expect to receive DTB address in x2.
	* This will be copied into x2 by dispatcher.
	* Set this (arg3) if necessary
	*/
	/* bl_mem_params->ep_info.args.arg3 = PLAT_HIKEY_DT_BASE; */
	#endif
	bl_mem_params->ep_info.spsr = poplar_get_spsr_for_bl32_entry();
	break;
	#endif

	case BL33_IMAGE_ID:
	/* BL33 expects to receive the primary CPU MPID (through r0) */
	bl_mem_params->ep_info.args.arg0 = 0xffff & read_mpidr();
	bl_mem_params->ep_info.spsr = poplar_get_spsr_for_bl33_entry();
	break;

	#ifdef SCP_BL2_BASE
	case SCP_BL2_IMAGE_ID:
	/* The subsequent handling of SCP_BL2 is platform specific */
	err = plat_poplar_bl2_handle_scp_bl2(&bl_mem_params->image_info);
	if (err) {
	WARN("Failure in platform-specific handling of SCP_BL2 image.\n");
	}
	break;
	#endif
	default:
	/* Do nothing in default case */
	break;
	}

	return err;
	}

	/*******************************************************************************
	* This function can be used by the platforms to update/use image
	* information for given `image_id`.
	******************************************************************************/
	int bl2_plat_handle_post_image_load(unsigned int image_id)
	{
	return poplar_bl2_handle_post_image_load(image_id);
	}

	#else /* LOAD_IMAGE_V2 */

	bl31_params_t *bl2_plat_get_bl31_params(void)
	{
	bl31_params_t *bl2_to_bl31_params = NULL;

	/*
	* Initialise the memory for all the arguments that needs to
	* be passed to BL3-1
	*/
	memset(&bl31_params_mem, 0, sizeof(bl2_to_bl31_params_mem_t));

	/* Assign memory for TF related information */
	bl2_to_bl31_params = &bl31_params_mem.bl31_params;
	SET_PARAM_HEAD(bl2_to_bl31_params, PARAM_BL31, VERSION_1, 0);

	/* Fill BL3-1 related information */
	bl2_to_bl31_params->bl31_image_info = &bl31_params_mem.bl31_image_info;
	SET_PARAM_HEAD(bl2_to_bl31_params->bl31_image_info,
	PARAM_IMAGE_BINARY, VERSION_1, 0);

	/* Fill BL3-2 related information if it exists */
	#ifdef BL32_BASE
	bl2_to_bl31_params->bl32_ep_info = &bl31_params_mem.bl32_ep_info;
	SET_PARAM_HEAD(bl2_to_bl31_params->bl32_ep_info, PARAM_EP,
	VERSION_1, 0);
	bl2_to_bl31_params->bl32_image_info = &bl31_params_mem.bl32_image_info;
	SET_PARAM_HEAD(bl2_to_bl31_params->bl32_image_info, PARAM_IMAGE_BINARY,
	VERSION_1, 0);
	#endif

	/* Fill BL3-3 related information */
	bl2_to_bl31_params->bl33_ep_info = &bl31_params_mem.bl33_ep_info;
	SET_PARAM_HEAD(bl2_to_bl31_params->bl33_ep_info,
	PARAM_EP, VERSION_1, 0);

	/* BL3-3 expects to receive the primary CPU MPID (through x0) */
	bl2_to_bl31_params->bl33_ep_info->args.arg0 = 0xffff & read_mpidr();

	bl2_to_bl31_params->bl33_image_info = &bl31_params_mem.bl33_image_info;
	SET_PARAM_HEAD(bl2_to_bl31_params->bl33_image_info,
	PARAM_IMAGE_BINARY, VERSION_1, 0);

	return bl2_to_bl31_params;
	}

	struct entry_point_info *bl2_plat_get_bl31_ep_info(void)
	{
	#if DEBUG
	bl31_params_mem.bl31_ep_info.args.arg1 = POPLAR_BL31_PLAT_PARAM_VAL;
	#endif

	return &bl31_params_mem.bl31_ep_info;
	}

	void bl2_plat_set_bl31_ep_info(image_info_t *image,
	entry_point_info_t *bl31_ep_info)
	{
	SET_SECURITY_STATE(bl31_ep_info->h.attr, SECURE);
	bl31_ep_info->spsr = SPSR_64(MODE_EL3, MODE_SP_ELX,
	DISABLE_ALL_EXCEPTIONS);
	}

	/*******************************************************************************
	* Before calling this function BL32 is loaded in memory and its entrypoint
	* is set by load_image. This is a placeholder for the platform to change
	* the entrypoint of BL32 and set SPSR and security state.
	* On Poplar we only set the security state of the entrypoint
	******************************************************************************/
	#ifdef BL32_BASE
	void bl2_plat_set_bl32_ep_info(image_info_t *bl32_image_info,
	entry_point_info_t *bl32_ep_info)
	{
	SET_SECURITY_STATE(bl32_ep_info->h.attr, SECURE);
	/*
	* The Secure Payload Dispatcher service is responsible for
	* setting the SPSR prior to entry into the BL32 image.
	*/
	bl32_ep_info->spsr = 0;
	}

	/*******************************************************************************
	* Populate the extents of memory available for loading BL32
	******************************************************************************/
	void bl2_plat_get_bl32_meminfo(meminfo_t *bl32_meminfo)
	{
	/*
	* Populate the extents of memory available for loading BL32.
	*/
	bl32_meminfo->total_base = BL32_BASE;
	bl32_meminfo->free_base = BL32_BASE;
	bl32_meminfo->total_size =
	(TSP_SEC_MEM_BASE + TSP_SEC_MEM_SIZE) - BL32_BASE;
	bl32_meminfo->free_size =
	(TSP_SEC_MEM_BASE + TSP_SEC_MEM_SIZE) - BL32_BASE;
	}
	#endif /* BL32_BASE */

	void bl2_plat_set_bl33_ep_info(image_info_t *image,
	entry_point_info_t *bl33_ep_info)
	{
	SET_SECURITY_STATE(bl33_ep_info->h.attr, NON_SECURE);
	bl33_ep_info->spsr = poplar_get_spsr_for_bl33_entry();
	bl33_ep_info->args.arg2 = image->image_size;
	}

	void bl2_plat_flush_bl31_params(void)
	{
	flush_dcache_range((unsigned long)&bl31_params_mem,
	sizeof(bl2_to_bl31_params_mem_t));
	}

	void bl2_plat_get_bl33_meminfo(meminfo_t *bl33_meminfo)
	{
	bl33_meminfo->total_base = DDR_BASE;
	bl33_meminfo->total_size = DDR_SIZE;
	bl33_meminfo->free_base = DDR_BASE;
	bl33_meminfo->free_size = DDR_SIZE;
	}
	#endif /* LOAD_IMAGE_V2 */

	void bl2_early_platform_setup(meminfo_t *mem_layout)
	{
	#if !POPLAR_RECOVERY
	struct mmc_device_info info;

	dw_mmc_params_t params = EMMC_INIT_PARAMS(POPLAR_EMMC_DESC_BASE);
	#endif

	console_init(PL011_UART0_BASE, PL011_UART0_CLK_IN_HZ, PL011_BAUDRATE);

	/* Enable arch timer */
	generic_delay_timer_init();

	bl2_tzram_layout = *mem_layout;

	#if !POPLAR_RECOVERY
	/* SoC-specific emmc register are initialized/configured by bootrom */
	INFO("BL2: initializing emmc\n");
	info.mmc_dev_type = MMC_IS_EMMC;
	dw_mmc_init(&params, &info);
	#endif

	plat_io_setup();
	}

	void bl2_plat_arch_setup(void)
	{
	plat_configure_mmu_el1(bl2_tzram_layout.total_base,
	bl2_tzram_layout.total_size,
	BL2_RO_BASE,
	BL2_RO_LIMIT,
	BL2_COHERENT_RAM_BASE,
	BL2_COHERENT_RAM_LIMIT);
	}

	void bl2_platform_setup(void)
	{
	}

	uintptr_t plat_get_ns_image_entrypoint(void)
	{
	#ifdef PRELOADED_BL33_BASE
	return PRELOADED_BL33_BASE;
	#else
	return PLAT_POPLAR_NS_IMAGE_OFFSET;
	#endif
	}