refactor(cpus): convert the Cortex-A510 to use the errata framework
This involves replacing:
* the reset_func with the standard cpu_reset_func_{start,end} to apply
errata automatically
* the <cpu>_errata_report with the errata_report_shim to report errata
automatically
...and for each erratum:
* the prologue with the workaround_<type>_start to do the checks and
framework registration automatically
* the epilogue with the workaround_<type>_end
* the checker function with the check_erratum_<type> to make it more
descriptive
It is important to note that the errata workaround sequences remain
unchanged and preserve their git blame.
Note: cortex_a510.S is applicable and being used only by arm_fpga platform.
However, to test the ported changes, below steps were carried out on the
fvp and the obtained results has been verified.
Testing was conducted by:
* Building for release with all errata flags enabled and running script
in change 19136 to compare output of objdump for each errata.
* Testing via script was not complete, as it directed to verify the
check and the workaround functions of few erratas manually.
* Manual comparison of disassembly of converted functions with non-
converted functions
aarch64-none-elf-objdump -D <trusted-firmware-a with conversion>/build/../release/bl31/bl31.elf
vs
aarch64-none-elf-objdump -D <trusted-firmware-a clean repo>/build/fvp/release/bl31/bl31.elf
* Manual comparison of disassembly of both both files(bl31.elf)
ensured, the ported changes were identical and hence verified.
* Build for release with all errata flags enabled and run default
tftf tests.
CROSS_COMPILE=aarch64-none-elf- \
make PLAT=fvp \
ARCH=aarch64 \
DEBUG=0 \
HW_ASSISTED_COHERENCY=1 \
USE_COHERENT_MEM=0 \
CTX_INCLUDE_AARCH32_REGS=0 \
ERRATA_A510_1922240=1 \
ERRATA_A510_2288014=1 \
ERRATA_A510_2042739=1 \
ERRATA_A510_2041909=1 \
ERRATA_A510_2250311=1 \
ERRATA_A510_2218950=1 \
ERRATA_A510_2172148=1 \
ERRATA_A510_2347730=1 \
ERRATA_A510_2371937=1 \
ERRATA_A510_2666669=1 \
ERRATA_A510_2684597=1 \
ERRATA_DSU_2313941=1 \
BL33=/home/jaychi01/tf_a/tf-a-tests/build/fvp/release/tftf.bin \
fip all -j12
* Build for debug with all errata enabled and step through ArmDS
at reset to ensure that if Errata are applicable then the
workaround functions are entered precisely.
Change-Id: Icf7aa25c0b3b30f5e2ad6db83953f7f4f0b201d9
Signed-off-by: Jayanth Dodderi Chidanand <jayanthdodderi.chidanand@arm.com>
2 files changed