| /* |
| * Copyright (c) 2016-2020, ARM Limited and Contributors. All rights reserved. |
| * |
| * SPDX-License-Identifier: BSD-3-Clause |
| */ |
| #include <asm_macros.S> |
| #include <console_macros.S> |
| |
| /* |
| * This file contains a skeleton console driver that can be used as a |
| * basis for a real console driver. Console drivers in Trusted Firmware |
| * can be instantiated multiple times. Each instance is described by a |
| * separate console_t structure which must be registered with the common |
| * console framework via console_register(). Console drivers should |
| * define a console_xxx_register() function that initializes a new |
| * console_t structure passed in from the caller and registers it after |
| * initializing the console hardware. Drivers may define their own |
| * structures extending console_t to store private driver information. |
| * Console drivers *MUST* ensure that the console callbacks they |
| * implement only change registers allowed in the clobber lists defined |
| * in this file. (Note that in addition to the explicit clobber lists, |
| * any function may always clobber the intra-procedure-call register |
| * r12, but may never depend on it retaining its value across any |
| * function call.) |
| */ |
| |
| .globl console_xxx_register |
| .globl console_xxx_putc |
| .globl console_xxx_getc |
| .globl console_xxx_flush |
| |
| /* ----------------------------------------------- |
| * int console_xxx_register(console_xxx_t *console, |
| * ...additional parameters as desired...) |
| * Function to initialize and register the console. |
| * The caller needs to pass an empty console_xxx_t |
| * structure in which *MUST* be allocated in |
| * persistent memory (e.g. a global or static local |
| * variable, *NOT* on the stack). |
| * In : r0 - pointer to empty console_t structure |
| * r1 through r7: additional parameters as desired |
| * Out: r0 - 1 on success, 0 on error |
| * Clobber list : r0 - r7 |
| * ----------------------------------------------- |
| */ |
| func console_xxx_register |
| /* |
| * Store parameters (e.g. hardware base address) in driver-specific |
| * console_xxx_t structure field if they will need to be retrieved |
| * by later console callback (e.g. putc). |
| * Example: |
| */ |
| str r1, [r0, #CONSOLE_T_BASE] |
| str r2, [r0, #CONSOLE_T_XXX_SOME_OTHER_VALUE] |
| |
| /* |
| * Initialize console hardware, using r1 - r7 parameters as needed. |
| * Keep console_t pointer in r0 for later. |
| */ |
| |
| /* |
| * Macro to finish up registration and return (needs valid r0 + lr). |
| * If any of the argument is unspecified, then the corresponding |
| * entry in console_t is set to 0. |
| */ |
| finish_console_register xxx putc=1, getc=1, flush=1 |
| |
| /* Jump here if hardware init fails or parameters are invalid. */ |
| register_fail: |
| mov r0, #0 |
| bx lr |
| endfunc console_xxx_register |
| |
| /* -------------------------------------------------------- |
| * int console_xxx_putc(int c, console_xxx_t *console) |
| * Function to output a character over the console. It |
| * returns the character printed on success or -1 on error. |
| * In : r0 - character to be printed |
| * r1 - pointer to console_t struct |
| * Out: r0 - printed character on success, < 0 on error. |
| * Clobber list : r0, r1, r2 |
| * -------------------------------------------------------- |
| */ |
| func console_xxx_putc |
| /* |
| * Retrieve values we need (e.g. hardware base address) from |
| * console_xxx_t structure pointed to by r1. |
| * Example: |
| */ |
| ldr r1, [r1, #CONSOLE_T_BASE] |
| |
| /* |
| * Write r0 to hardware. |
| */ |
| |
| bx lr |
| |
| /* Jump here if output fails for any reason. */ |
| putc_error: |
| mov r0, #-1 |
| bx lr |
| endfunc console_xxx_putc |
| |
| /* --------------------------------------------- |
| * int console_xxx_getc(console_xxx_t *console) |
| * Function to get a character from the console. |
| * Even though console_getc() is blocking, this |
| * callback has to be non-blocking and always |
| * return immediately to allow polling multiple |
| * drivers concurrently. |
| * Returns the character grabbed on success, |
| * ERROR_NO_PENDING_CHAR if no character was |
| * available at this time, or any value |
| * between -2 and -127 if there was an error. |
| * In : r0 - pointer to console_t struct |
| * Out: r0 - character on success, |
| * ERROR_NO_PENDING_CHAR if no char, |
| * < -1 on error |
| * Clobber list : r0, r1 |
| * --------------------------------------------- |
| */ |
| func console_xxx_getc |
| /* |
| * Retrieve values we need (e.g. hardware base address) from |
| * console_xxx_t structure pointed to by r0. |
| * Example: |
| */ |
| ldr r1, [r0, #CONSOLE_T_BASE] |
| |
| /* |
| * Try to read character into r0 from hardware. |
| */ |
| |
| bx lr |
| |
| /* Jump here if there is no character available at this time. */ |
| getc_no_char: |
| mov r0, #ERROR_NO_PENDING_CHAR |
| bx lr |
| |
| /* Jump here if there was any hardware error. */ |
| getc_error: |
| mov r0, #-2 /* may pick error codes between -2 and -127 */ |
| bx lr |
| endfunc console_xxx_getc |
| |
| /* --------------------------------------------- |
| * int console_xxx_flush(console_xxx_t *console) |
| * Function to force a write of all buffered |
| * data that hasn't been output. |
| * In : r0 - pointer to console_xxx_t struct |
| * Out: void |
| * Clobber list : r0, r1, r2, r3, r4, r5 |
| * --------------------------------------------- |
| */ |
| func console_xxx_flush |
| /* |
| * Retrieve values we need (e.g. hardware base address) from |
| * console_xxx_t structure pointed to by r0. |
| * Example: |
| */ |
| ldr r1, [r0, #CONSOLE_T_BASE] |
| |
| /* |
| * Flush all remaining output from hardware FIFOs. Do not return until |
| * all data has been flushed or there was an unrecoverable error. |
| */ |
| |
| bx lr |
| endfunc console_xxx_flush |