include/arch/aarch64/asm_macros.S - filogic/atf - Gitiles

 /*
  * Copyright (c) 2013-2020, ARM Limited and Contributors. All rights reserved.
  *
  * SPDX-License-Identifier: BSD-3-Clause
  */
 #ifndef ASM_MACROS_S
 #define ASM_MACROS_S

 #include <arch.h>
 #include <common/asm_macros_common.S>
 #include <lib/spinlock.h>

 /*
  * TLBI instruction with type specifier that implements the workaround for
  * errata 813419 of Cortex-A57 or errata 1286807 of Cortex-A76.
  */
 #if ERRATA_A57_813419 || ERRATA_A76_1286807
 #define TLB_INVALIDATE(_type) \
 	tlbi	_type; \
 	dsb	ish; \
 	tlbi	_type
 #else
 #define TLB_INVALIDATE(_type) \
 	tlbi	_type
 #endif


 	/*
 	 * Create a stack frame at the start of an assembly function. Will also
 	 * add all necessary call frame information (cfi) directives for a
 	 * pretty stack trace. This is necessary as there is quite a bit of
 	 * flexibility within a stack frame and the stack pointer can move
 	 * around throughout the function. If the debugger isn't told where to
 	 * find things, it gets lost, gives up and displays nothing. So inform
 	 * the debugger of what's where. Anchor the Canonical Frame Address
 	 * (CFA; the thing used to track what's where) to the frame pointer as
 	 * that's not expected to change in the function body and no extra
 	 * bookkeeping will be necessary, allowing free movement of the sp
 	 *
 	 *   _frame_size: requested space for caller to use. Must be a mutliple
 	 *     of 16 for stack pointer alignment
 	 */
 	.macro	func_prologue _frame_size=0
 	.if \_frame_size & 0xf
 	.error "frame_size must have stack pointer alignment (multiple of 16)"
 	.endif

 	/* put frame record at top of frame */
 	stp	x29, x30, [sp, #-0x10]!
 	mov	x29,sp
 	.if \_frame_size
 	sub	sp, sp, #\_frame_size
 	.endif

 	/* point CFA to start of frame record, i.e. x29 + 0x10 */
 	.cfi_def_cfa	x29,  0x10
 	/* inform it about x29, x30 locations */
 	.cfi_offset	x30, -0x8
 	.cfi_offset	x29, -0x10
 	.endm

 	/*
 	 * Clear stack frame at the end of an assembly function.
 	 *
 	 *   _frame_size: the value passed to func_prologue
 	 */
 	.macro	func_epilogue _frame_size=0
 	/* remove requested space */
 	.if \_frame_size
 	add	sp, sp, #\_frame_size
 	.endif
 	ldp	x29, x30, [sp], #0x10
 	.endm


 	.macro	dcache_line_size  reg, tmp
 	mrs	\tmp, ctr_el0
 	ubfx	\tmp, \tmp, #16, #4
 	mov	\reg, #4
 	lsl	\reg, \reg, \tmp
 	.endm


 	.macro	icache_line_size  reg, tmp
 	mrs	\tmp, ctr_el0
 	and	\tmp, \tmp, #0xf
 	mov	\reg, #4
 	lsl	\reg, \reg, \tmp
 	.endm


 	.macro	smc_check  label
 	mrs	x0, esr_el3
 	ubfx	x0, x0, #ESR_EC_SHIFT, #ESR_EC_LENGTH
 	cmp	x0, #EC_AARCH64_SMC
 	b.ne	$label
 	.endm

 	/*
 	 * Declare the exception vector table, enforcing it is aligned on a
 	 * 2KB boundary, as required by the ARMv8 architecture.
 	 * Use zero bytes as the fill value to be stored in the padding bytes
 	 * so that it inserts illegal AArch64 instructions. This increases
 	 * security, robustness and potentially facilitates debugging.
 	 */
 	.macro vector_base  label, section_name=.vectors
 	.section \section_name, "ax"
 	.align 11, 0
 	\label:
 	.endm

 	/*
 	 * Create an entry in the exception vector table, enforcing it is
 	 * aligned on a 128-byte boundary, as required by the ARMv8 architecture.
 	 * Use zero bytes as the fill value to be stored in the padding bytes
 	 * so that it inserts illegal AArch64 instructions. This increases
 	 * security, robustness and potentially facilitates debugging.
 	 */
 	.macro vector_entry  label, section_name=.vectors
 	.cfi_sections .debug_frame
 	.section \section_name, "ax"
 	.align 7, 0
 	.type \label, %function
 	.cfi_startproc
 	\label:
 	.endm

 	/*
 	 * Add the bytes until fill the full exception vector, whose size is always
 	 * 32 instructions. If there are more than 32 instructions in the
 	 * exception vector then an error is emitted.
 	 */
 	.macro end_vector_entry label
 	.cfi_endproc
 	.fill	\label + (32 * 4) - .
 	.endm

 	/*
 	 * This macro calculates the base address of the current CPU's MP stack
 	 * using the plat_my_core_pos() index, the name of the stack storage
 	 * and the size of each stack
 	 * Out: X0 = physical address of stack base
 	 * Clobber: X30, X1, X2
 	 */
 	.macro get_my_mp_stack _name, _size
 	bl	plat_my_core_pos
 	adrp	x2, (\_name + \_size)
 	add	x2, x2, :lo12:(\_name + \_size)
 	mov x1, #\_size
 	madd x0, x0, x1, x2
 	.endm

 	/*
 	 * This macro calculates the base address of a UP stack using the
 	 * name of the stack storage and the size of the stack
 	 * Out: X0 = physical address of stack base
 	 */
 	.macro get_up_stack _name, _size
 	adrp	x0, (\_name + \_size)
 	add	x0, x0, :lo12:(\_name + \_size)
 	.endm

 	/*
 	 * Helper macro to generate the best mov/movk combinations according
 	 * the value to be moved. The 16 bits from '_shift' are tested and
 	 * if not zero, they are moved into '_reg' without affecting
 	 * other bits.
 	 */
 	.macro _mov_imm16 _reg, _val, _shift
 		.if (\_val >> \_shift) & 0xffff
 			.if (\_val & (1 << \_shift - 1))
 				movk	\_reg, (\_val >> \_shift) & 0xffff, LSL \_shift
 			.else
 				mov	\_reg, \_val & (0xffff << \_shift)
 			.endif
 		.endif
 	.endm

 	/*
 	 * Helper macro to load arbitrary values into 32 or 64-bit registers
 	 * which generates the best mov/movk combinations. Many base addresses
 	 * are 64KB aligned the macro will eliminate updating bits 15:0 in
 	 * that case
 	 */
 	.macro mov_imm _reg, _val
 		.if (\_val) == 0
 			mov	\_reg, #0
 		.else
 			_mov_imm16	\_reg, (\_val), 0
 			_mov_imm16	\_reg, (\_val), 16
 			_mov_imm16	\_reg, (\_val), 32
 			_mov_imm16	\_reg, (\_val), 48
 		.endif
 	.endm

 	/*
 	 * Macro to mark instances where we're jumping to a function and don't
 	 * expect a return. To provide the function being jumped to with
 	 * additional information, we use 'bl' instruction to jump rather than
 	 * 'b'.
          *
 	 * Debuggers infer the location of a call from where LR points to, which
 	 * is usually the instruction after 'bl'. If this macro expansion
 	 * happens to be the last location in a function, that'll cause the LR
 	 * to point a location beyond the function, thereby misleading debugger
 	 * back trace. We therefore insert a 'nop' after the function call for
 	 * debug builds, unless 'skip_nop' parameter is non-zero.
 	 */
 	.macro no_ret _func:req, skip_nop=0
 	bl	\_func
 #if DEBUG
 	.ifeq \skip_nop
 	nop
 	.endif
 #endif
 	.endm

 	/*
 	 * Reserve space for a spin lock in assembly file.
 	 */
 	.macro define_asm_spinlock _name:req
 	.align	SPINLOCK_ASM_ALIGN
 	\_name:
 	.space	SPINLOCK_ASM_SIZE
 	.endm

 	/*
 	 * With RAS extension executes esb instruction, else NOP
 	 */
 	.macro esb
 	.inst	0xd503221f
 	.endm

 	/*
 	 * Helper macro to read system register value into x0
 	 */
 	.macro	read reg:req
 #if ENABLE_BTI
 	bti	j
 #endif
 	mrs	x0, \reg
 	ret
 	.endm

 	/*
 	 * Helper macro to write value from x1 to system register
 	 */
 	.macro	write reg:req
 #if ENABLE_BTI
 	bti	j
 #endif
 	msr	\reg, x1
 	ret
 	.endm

 	/*
 	 * The "sb" instruction was introduced later into the architecture,
 	 * so not all toolchains understand it. Some deny its usage unless
 	 * a supported processor is specified on the build command line.
 	 * Use sb's system register encoding to work around this, we already
 	 * guard the sb execution with a feature flag.
 	 */

 	.macro sb_barrier_insn
 	msr	SYSREG_SB, xzr
 	.endm

 	/*
 	 * Macro for using speculation barrier instruction introduced by
 	 * FEAT_SB, if it's enabled.
 	 */
 	.macro speculation_barrier
 #if ENABLE_FEAT_SB
 	sb_barrier_insn
 #else
 	dsb	sy
 	isb
 #endif
 	.endm

 	/*
 	 * Macro for mitigating against speculative execution beyond ERET. Uses the
 	 * speculation barrier instruction introduced by FEAT_SB, if it's enabled.
 	 */
 	.macro exception_return
 	eret
 #if ENABLE_FEAT_SB
 	sb_barrier_insn
 #else
 	dsb	nsh
 	isb
 #endif
 	.endm

 #endif /* ASM_MACROS_S */
	/*
	* Copyright (c) 2013-2020, ARM Limited and Contributors. All rights reserved.
	*
	* SPDX-License-Identifier: BSD-3-Clause
	*/
	#ifndef ASM_MACROS_S
	#define ASM_MACROS_S

	#include <arch.h>
	#include <common/asm_macros_common.S>
	#include <lib/spinlock.h>

	/*
	* TLBI instruction with type specifier that implements the workaround for
	* errata 813419 of Cortex-A57 or errata 1286807 of Cortex-A76.
	*/
	#if ERRATA_A57_813419 \|\| ERRATA_A76_1286807
	#define TLB_INVALIDATE(_type) \
	tlbi _type; \
	dsb ish; \
	tlbi _type
	#else
	#define TLB_INVALIDATE(_type) \
	tlbi _type
	#endif


	/*
	* Create a stack frame at the start of an assembly function. Will also
	* add all necessary call frame information (cfi) directives for a
	* pretty stack trace. This is necessary as there is quite a bit of
	* flexibility within a stack frame and the stack pointer can move
	* around throughout the function. If the debugger isn't told where to
	* find things, it gets lost, gives up and displays nothing. So inform
	* the debugger of what's where. Anchor the Canonical Frame Address
	* (CFA; the thing used to track what's where) to the frame pointer as
	* that's not expected to change in the function body and no extra
	* bookkeeping will be necessary, allowing free movement of the sp
	*
	* _frame_size: requested space for caller to use. Must be a mutliple
	* of 16 for stack pointer alignment
	*/
	.macro func_prologue _frame_size=0
	.if \_frame_size & 0xf
	.error "frame_size must have stack pointer alignment (multiple of 16)"
	.endif

	/* put frame record at top of frame */
	stp x29, x30, [sp, #-0x10]!
	mov x29,sp
	.if \_frame_size
	sub sp, sp, #\_frame_size
	.endif

	/* point CFA to start of frame record, i.e. x29 + 0x10 */
	.cfi_def_cfa x29, 0x10
	/* inform it about x29, x30 locations */
	.cfi_offset x30, -0x8
	.cfi_offset x29, -0x10
	.endm

	/*
	* Clear stack frame at the end of an assembly function.
	*
	* _frame_size: the value passed to func_prologue
	*/
	.macro func_epilogue _frame_size=0
	/* remove requested space */
	.if \_frame_size
	add sp, sp, #\_frame_size
	.endif
	ldp x29, x30, [sp], #0x10
	.endm


	.macro dcache_line_size reg, tmp
	mrs \tmp, ctr_el0
	ubfx \tmp, \tmp, #16, #4
	mov \reg, #4
	lsl \reg, \reg, \tmp
	.endm


	.macro icache_line_size reg, tmp
	mrs \tmp, ctr_el0
	and \tmp, \tmp, #0xf
	mov \reg, #4
	lsl \reg, \reg, \tmp
	.endm


	.macro smc_check label
	mrs x0, esr_el3
	ubfx x0, x0, #ESR_EC_SHIFT, #ESR_EC_LENGTH
	cmp x0, #EC_AARCH64_SMC
	b.ne $label
	.endm

	/*
	* Declare the exception vector table, enforcing it is aligned on a
	* 2KB boundary, as required by the ARMv8 architecture.
	* Use zero bytes as the fill value to be stored in the padding bytes
	* so that it inserts illegal AArch64 instructions. This increases
	* security, robustness and potentially facilitates debugging.
	*/
	.macro vector_base label, section_name=.vectors
	.section \section_name, "ax"
	.align 11, 0
	\label:
	.endm

	/*
	* Create an entry in the exception vector table, enforcing it is
	* aligned on a 128-byte boundary, as required by the ARMv8 architecture.
	* Use zero bytes as the fill value to be stored in the padding bytes
	* so that it inserts illegal AArch64 instructions. This increases
	* security, robustness and potentially facilitates debugging.
	*/
	.macro vector_entry label, section_name=.vectors
	.cfi_sections .debug_frame
	.section \section_name, "ax"
	.align 7, 0
	.type \label, %function
	.cfi_startproc
	\label:
	.endm

	/*
	* Add the bytes until fill the full exception vector, whose size is always
	* 32 instructions. If there are more than 32 instructions in the
	* exception vector then an error is emitted.
	*/
	.macro end_vector_entry label
	.cfi_endproc
	.fill \label + (32 * 4) - .
	.endm

	/*
	* This macro calculates the base address of the current CPU's MP stack
	* using the plat_my_core_pos() index, the name of the stack storage
	* and the size of each stack
	* Out: X0 = physical address of stack base
	* Clobber: X30, X1, X2
	*/
	.macro get_my_mp_stack _name, _size
	bl plat_my_core_pos
	adrp x2, (\_name + \_size)
	add x2, x2, :lo12:(\_name + \_size)
	mov x1, #\_size
	madd x0, x0, x1, x2
	.endm

	/*
	* This macro calculates the base address of a UP stack using the
	* name of the stack storage and the size of the stack
	* Out: X0 = physical address of stack base
	*/
	.macro get_up_stack _name, _size
	adrp x0, (\_name + \_size)
	add x0, x0, :lo12:(\_name + \_size)
	.endm

	/*
	* Helper macro to generate the best mov/movk combinations according
	* the value to be moved. The 16 bits from '_shift' are tested and
	* if not zero, they are moved into '_reg' without affecting
	* other bits.
	*/
	.macro _mov_imm16 _reg, _val, _shift
	.if (\_val >> \_shift) & 0xffff
	.if (\_val & (1 << \_shift - 1))
	movk \_reg, (\_val >> \_shift) & 0xffff, LSL \_shift
	.else
	mov \_reg, \_val & (0xffff << \_shift)
	.endif
	.endif
	.endm

	/*
	* Helper macro to load arbitrary values into 32 or 64-bit registers
	* which generates the best mov/movk combinations. Many base addresses
	* are 64KB aligned the macro will eliminate updating bits 15:0 in
	* that case
	*/
	.macro mov_imm _reg, _val
	.if (\_val) == 0
	mov \_reg, #0
	.else
	_mov_imm16 \_reg, (\_val), 0
	_mov_imm16 \_reg, (\_val), 16
	_mov_imm16 \_reg, (\_val), 32
	_mov_imm16 \_reg, (\_val), 48
	.endif
	.endm

	/*
	* Macro to mark instances where we're jumping to a function and don't
	* expect a return. To provide the function being jumped to with
	* additional information, we use 'bl' instruction to jump rather than
	* 'b'.
	*
	* Debuggers infer the location of a call from where LR points to, which
	* is usually the instruction after 'bl'. If this macro expansion
	* happens to be the last location in a function, that'll cause the LR
	* to point a location beyond the function, thereby misleading debugger
	* back trace. We therefore insert a 'nop' after the function call for
	* debug builds, unless 'skip_nop' parameter is non-zero.
	*/
	.macro no_ret _func:req, skip_nop=0
	bl \_func
	#if DEBUG
	.ifeq \skip_nop
	nop
	.endif
	#endif
	.endm

	/*
	* Reserve space for a spin lock in assembly file.
	*/
	.macro define_asm_spinlock _name:req
	.align SPINLOCK_ASM_ALIGN
	\_name:
	.space SPINLOCK_ASM_SIZE
	.endm

	/*
	* With RAS extension executes esb instruction, else NOP
	*/
	.macro esb
	.inst 0xd503221f
	.endm

	/*
	* Helper macro to read system register value into x0
	*/
	.macro read reg:req
	#if ENABLE_BTI
	bti j
	#endif
	mrs x0, \reg
	ret
	.endm

	/*
	* Helper macro to write value from x1 to system register
	*/
	.macro write reg:req
	#if ENABLE_BTI
	bti j
	#endif
	msr \reg, x1
	ret
	.endm

	/*
	* The "sb" instruction was introduced later into the architecture,
	* so not all toolchains understand it. Some deny its usage unless
	* a supported processor is specified on the build command line.
	* Use sb's system register encoding to work around this, we already
	* guard the sb execution with a feature flag.
	*/

	.macro sb_barrier_insn
	msr SYSREG_SB, xzr
	.endm

	/*
	* Macro for using speculation barrier instruction introduced by
	* FEAT_SB, if it's enabled.
	*/
	.macro speculation_barrier
	#if ENABLE_FEAT_SB
	sb_barrier_insn
	#else
	dsb sy
	isb
	#endif
	.endm

	/*
	* Macro for mitigating against speculative execution beyond ERET. Uses the
	* speculation barrier instruction introduced by FEAT_SB, if it's enabled.
	*/
	.macro exception_return
	eret
	#if ENABLE_FEAT_SB
	sb_barrier_insn
	#else
	dsb nsh
	isb
	#endif
	.endm

	#endif /* ASM_MACROS_S */