bl31/context_mgmt.c - filogic/atf - Gitiles

 /*
  * Copyright (c) 2013-2014, ARM Limited and Contributors. All rights reserved.
  *
  * Redistribution and use in source and binary forms, with or without
  * modification, are permitted provided that the following conditions are met:
  *
  * Redistributions of source code must retain the above copyright notice, this
  * list of conditions and the following disclaimer.
  *
  * Redistributions in binary form must reproduce the above copyright notice,
  * this list of conditions and the following disclaimer in the documentation
  * and/or other materials provided with the distribution.
  *
  * Neither the name of ARM nor the names of its contributors may be used
  * to endorse or promote products derived from this software without specific
  * prior written permission.
  *
  * THIS SOFTWARE IS PROVIDED BY THE COPYRIGHT HOLDERS AND CONTRIBUTORS "AS IS"
  * AND ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE
  * IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE
  * ARE DISCLAIMED. IN NO EVENT SHALL THE COPYRIGHT HOLDER OR CONTRIBUTORS BE
  * LIABLE FOR ANY DIRECT, INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY, OR
  * CONSEQUENTIAL DAMAGES (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF
  * SUBSTITUTE GOODS OR SERVICES; LOSS OF USE, DATA, OR PROFITS; OR BUSINESS
  * INTERRUPTION) HOWEVER CAUSED AND ON ANY THEORY OF LIABILITY, WHETHER IN
  * CONTRACT, STRICT LIABILITY, OR TORT (INCLUDING NEGLIGENCE OR OTHERWISE)
  * ARISING IN ANY WAY OUT OF THE USE OF THIS SOFTWARE, EVEN IF ADVISED OF THE
  * POSSIBILITY OF SUCH DAMAGE.
  */

 #include <arch.h>
 #include <arch_helpers.h>
 #include <assert.h>
 #include <bl_common.h>
 #include <bl31.h>
 #include <context.h>
 #include <context_mgmt.h>
 #include <cpu_data.h>
 #include <interrupt_mgmt.h>
 #include <platform.h>
 #include <platform_def.h>
 #include <runtime_svc.h>
 #include <string.h>


 /*******************************************************************************
  * Context management library initialisation routine. This library is used by
  * runtime services to share pointers to 'cpu_context' structures for the secure
  * and non-secure states. Management of the structures and their associated
  * memory is not done by the context management library e.g. the PSCI service
  * manages the cpu context used for entry from and exit to the non-secure state.
  * The Secure payload dispatcher service manages the context(s) corresponding to
  * the secure state. It also uses this library to get access to the non-secure
  * state cpu context pointers.
  * Lastly, this library provides the api to make SP_EL3 point to the cpu context
  * which will used for programming an entry into a lower EL. The same context
  * will used to save state upon exception entry from that EL.
  ******************************************************************************/
 void cm_init(void)
 {
 	/*
 	 * The context management library has only global data to intialize, but
 	 * that will be done when the BSS is zeroed out
 	 */
 }

 /*******************************************************************************
  * This function returns a pointer to the most recent 'cpu_context' structure
  * for the CPU identified by MPIDR that was set as the context for the specified
  * security state. NULL is returned if no such structure has been specified.
  ******************************************************************************/
 void *cm_get_context_by_mpidr(uint64_t mpidr, uint32_t security_state)
 {
 	assert(sec_state_is_valid(security_state));

 	return get_cpu_data_by_mpidr(mpidr, cpu_context[security_state]);
 }

 /*******************************************************************************
  * This function sets the pointer to the current 'cpu_context' structure for the
  * specified security state for the CPU identified by MPIDR
  ******************************************************************************/
 void cm_set_context_by_mpidr(uint64_t mpidr, void *context, uint32_t security_state)
 {
 	assert(sec_state_is_valid(security_state));

 	set_cpu_data_by_mpidr(mpidr, cpu_context[security_state], context);
 }

 /*******************************************************************************
  * This function is used to program the context that's used for exception
  * return. This initializes the SP_EL3 to a pointer to a 'cpu_context' set for
  * the required security state
  ******************************************************************************/
 static inline void cm_set_next_context(void *context)
 {
 #if DEBUG
 	uint64_t sp_mode;

 	/*
 	 * Check that this function is called with SP_EL0 as the stack
 	 * pointer
 	 */
 	__asm__ volatile("mrs	%0, SPSel\n"
 			 : "=r" (sp_mode));

 	assert(sp_mode == MODE_SP_EL0);
 #endif

 	__asm__ volatile("msr	spsel, #1\n"
 			 "mov	sp, %0\n"
 			 "msr	spsel, #0\n"
 			 : : "r" (context));
 }

 /*******************************************************************************
  * The following function initializes a cpu_context for the current CPU for
  * first use, and sets the initial entrypoint state as specified by the
  * entry_point_info structure.
  *
  * The security state to initialize is determined by the SECURE attribute
  * of the entry_point_info. The function returns a pointer to the initialized
  * context and sets this as the next context to return to.
  *
  * The EE and ST attributes are used to configure the endianess and secure
  * timer availability for the new excution context.
  *
  * To prepare the register state for entry call cm_prepare_el3_exit() and
  * el3_exit(). For Secure-EL1 cm_prepare_el3_exit() is equivalent to
  * cm_e1_sysreg_context_restore().
  ******************************************************************************/
 void cm_init_context(uint64_t mpidr, const entry_point_info_t *ep)
 {
 	uint32_t security_state;
 	cpu_context_t *ctx;
 	uint32_t scr_el3;
 	el3_state_t *state;
 	gp_regs_t *gp_regs;
 	unsigned long sctlr_elx;

 	security_state = GET_SECURITY_STATE(ep->h.attr);
 	ctx = cm_get_context_by_mpidr(mpidr, security_state);
 	assert(ctx);

 	/* Clear any residual register values from the context */
 	memset(ctx, 0, sizeof(*ctx));

 	/*
 	 * Base the context SCR on the current value, adjust for entry point
 	 * specific requirements and set trap bits from the IMF
 	 * TODO: provide the base/global SCR bits using another mechanism?
 	 */
 	scr_el3 = read_scr();
 	scr_el3 &= ~(SCR_NS_BIT | SCR_RW_BIT | SCR_FIQ_BIT | SCR_IRQ_BIT |
 			SCR_ST_BIT | SCR_HCE_BIT);

 	if (security_state != SECURE)
 		scr_el3 |= SCR_NS_BIT;

 	if (GET_RW(ep->spsr) == MODE_RW_64)
 		scr_el3 |= SCR_RW_BIT;

 	if (EP_GET_ST(ep->h.attr))
 		scr_el3 |= SCR_ST_BIT;

 	scr_el3 |= get_scr_el3_from_routing_model(security_state);

 	/*
 	 * Set up SCTLR_ELx for the target exception level:
 	 * EE bit is taken from the entrpoint attributes
 	 * M, C and I bits must be zero (as required by PSCI specification)
 	 *
 	 * The target exception level is based on the spsr mode requested.
 	 * If execution is requested to EL2 or hyp mode, HVC is enabled
 	 * via SCR_EL3.HCE.
 	 *
 	 * Always compute the SCTLR_EL1 value and save in the cpu_context
 	 * - the EL2 registers are set up by cm_preapre_ns_entry() as they
 	 * are not part of the stored cpu_context
 	 *
 	 * TODO: In debug builds the spsr should be validated and checked
 	 * against the CPU support, security state, endianess and pc
 	 */
 	sctlr_elx = EP_GET_EE(ep->h.attr) ? SCTLR_EE_BIT : 0;
 	sctlr_elx |= SCTLR_EL1_RES1;
 	write_ctx_reg(get_sysregs_ctx(ctx), CTX_SCTLR_EL1, sctlr_elx);

 	if ((GET_RW(ep->spsr) == MODE_RW_64
 	     && GET_EL(ep->spsr) == MODE_EL2)
 	    || (GET_RW(ep->spsr) != MODE_RW_64
 		&& GET_M32(ep->spsr) == MODE32_hyp)) {
 		scr_el3 |= SCR_HCE_BIT;
 	}

 	/* Populate EL3 state so that we've the right context before doing ERET */
 	state = get_el3state_ctx(ctx);
 	write_ctx_reg(state, CTX_SCR_EL3, scr_el3);
 	write_ctx_reg(state, CTX_ELR_EL3, ep->pc);
 	write_ctx_reg(state, CTX_SPSR_EL3, ep->spsr);

 	/*
 	 * Store the X0-X7 value from the entrypoint into the context
 	 * Use memcpy as we are in control of the layout of the structures
 	 */
 	gp_regs = get_gpregs_ctx(ctx);
 	memcpy(gp_regs, (void *)&ep->args, sizeof(aapcs64_params_t));
 }

 /*******************************************************************************
  * Prepare the CPU system registers for first entry into secure or normal world
  *
  * If execution is requested to EL2 or hyp mode, SCTLR_EL2 is initialized
  * If execution is requested to non-secure EL1 or svc mode, and the CPU supports
  * EL2 then EL2 is disabled by configuring all necessary EL2 registers.
  * For all entries, the EL1 registers are initialized from the cpu_context
  ******************************************************************************/
 void cm_prepare_el3_exit(uint32_t security_state)
 {
 	uint32_t sctlr_elx, scr_el3, cptr_el2;
 	cpu_context_t *ctx = cm_get_context(security_state);

 	assert(ctx);

 	if (security_state == NON_SECURE) {
 		scr_el3 = read_ctx_reg(get_el3state_ctx(ctx), CTX_SCR_EL3);
 		if (scr_el3 & SCR_HCE_BIT) {
 			/* Use SCTLR_EL1.EE value to initialise sctlr_el2 */
 			sctlr_elx = read_ctx_reg(get_sysregs_ctx(ctx),
 						 CTX_SCTLR_EL1);
 			sctlr_elx &= ~SCTLR_EE_BIT;
 			sctlr_elx |= SCTLR_EL2_RES1;
 			write_sctlr_el2(sctlr_elx);
 		} else if (read_id_aa64pfr0_el1() &
 			   (ID_AA64PFR0_ELX_MASK << ID_AA64PFR0_EL2_SHIFT)) {
 			/* EL2 present but unused, need to disable safely */

 			/* HCR_EL2 = 0, except RW bit set to match SCR_EL3 */
 			write_hcr_el2((scr_el3 & SCR_RW_BIT) ? HCR_RW_BIT : 0);

 			/* SCTLR_EL2 : can be ignored when bypassing */

 			/* CPTR_EL2 : disable all traps TCPAC, TTA, TFP */
 			cptr_el2 = read_cptr_el2();
 			cptr_el2 &= ~(TCPAC_BIT | TTA_BIT | TFP_BIT);
 			write_cptr_el2(cptr_el2);

 			/* Enable EL1 access to timer */
 			write_cnthctl_el2(EL1PCEN_BIT | EL1PCTEN_BIT);

 			/* Set VPIDR, VMPIDR to match MIDR, MPIDR */
 			write_vpidr_el2(read_midr_el1());
 			write_vmpidr_el2(read_mpidr_el1());
 		}
 	}

 	el1_sysregs_context_restore(get_sysregs_ctx(ctx));

 	cm_set_next_context(ctx);
 }

 /*******************************************************************************
  * The next four functions are used by runtime services to save and restore EL3
  * and EL1 contexts on the 'cpu_context' structure for the specified security
  * state.
  ******************************************************************************/
 void cm_el3_sysregs_context_save(uint32_t security_state)
 {
 	cpu_context_t *ctx;

 	ctx = cm_get_context(security_state);
 	assert(ctx);

 	el3_sysregs_context_save(get_el3state_ctx(ctx));
 }

 void cm_el3_sysregs_context_restore(uint32_t security_state)
 {
 	cpu_context_t *ctx;

 	ctx = cm_get_context(security_state);
 	assert(ctx);

 	el3_sysregs_context_restore(get_el3state_ctx(ctx));
 }

 void cm_el1_sysregs_context_save(uint32_t security_state)
 {
 	cpu_context_t *ctx;

 	ctx = cm_get_context(security_state);
 	assert(ctx);

 	el1_sysregs_context_save(get_sysregs_ctx(ctx));
 }

 void cm_el1_sysregs_context_restore(uint32_t security_state)
 {
 	cpu_context_t *ctx;

 	ctx = cm_get_context(security_state);
 	assert(ctx);

 	el1_sysregs_context_restore(get_sysregs_ctx(ctx));
 }

 /*******************************************************************************
  * This function populates ELR_EL3 member of 'cpu_context' pertaining to the
  * given security state with the given entrypoint
  ******************************************************************************/
 void cm_set_elr_el3(uint32_t security_state, uint64_t entrypoint)
 {
 	cpu_context_t *ctx;
 	el3_state_t *state;

 	ctx = cm_get_context(security_state);
 	assert(ctx);

 	/* Populate EL3 state so that ERET jumps to the correct entry */
 	state = get_el3state_ctx(ctx);
 	write_ctx_reg(state, CTX_ELR_EL3, entrypoint);
 }

 /*******************************************************************************
  * This function populates ELR_EL3 and SPSR_EL3 members of 'cpu_context'
  * pertaining to the given security state
  ******************************************************************************/
 void cm_set_elr_spsr_el3(uint32_t security_state,
 			 uint64_t entrypoint, uint32_t spsr)
 {
 	cpu_context_t *ctx;
 	el3_state_t *state;

 	ctx = cm_get_context(security_state);
 	assert(ctx);

 	/* Populate EL3 state so that ERET jumps to the correct entry */
 	state = get_el3state_ctx(ctx);
 	write_ctx_reg(state, CTX_ELR_EL3, entrypoint);
 	write_ctx_reg(state, CTX_SPSR_EL3, spsr);
 }

 /*******************************************************************************
  * This function updates a single bit in the SCR_EL3 member of the 'cpu_context'
  * pertaining to the given security state using the value and bit position
  * specified in the parameters. It preserves all other bits.
  ******************************************************************************/
 void cm_write_scr_el3_bit(uint32_t security_state,
 			  uint32_t bit_pos,
 			  uint32_t value)
 {
 	cpu_context_t *ctx;
 	el3_state_t *state;
 	uint32_t scr_el3;

 	ctx = cm_get_context(security_state);
 	assert(ctx);

 	/* Ensure that the bit position is a valid one */
 	assert((1 << bit_pos) & SCR_VALID_BIT_MASK);

 	/* Ensure that the 'value' is only a bit wide */
 	assert(value <= 1);

 	/*
 	 * Get the SCR_EL3 value from the cpu context, clear the desired bit
 	 * and set it to its new value.
 	 */
 	state = get_el3state_ctx(ctx);
 	scr_el3 = read_ctx_reg(state, CTX_SCR_EL3);
 	scr_el3 &= ~(1 << bit_pos);
 	scr_el3 |= value << bit_pos;
 	write_ctx_reg(state, CTX_SCR_EL3, scr_el3);
 }

 /*******************************************************************************
  * This function retrieves SCR_EL3 member of 'cpu_context' pertaining to the
  * given security state.
  ******************************************************************************/
 uint32_t cm_get_scr_el3(uint32_t security_state)
 {
 	cpu_context_t *ctx;
 	el3_state_t *state;

 	ctx = cm_get_context(security_state);
 	assert(ctx);

 	/* Populate EL3 state so that ERET jumps to the correct entry */
 	state = get_el3state_ctx(ctx);
 	return read_ctx_reg(state, CTX_SCR_EL3);
 }

 /*******************************************************************************
  * This function is used to program the context that's used for exception
  * return. This initializes the SP_EL3 to a pointer to a 'cpu_context' set for
  * the required security state
  ******************************************************************************/
 void cm_set_next_eret_context(uint32_t security_state)
 {
 	cpu_context_t *ctx;

 	ctx = cm_get_context(security_state);
 	assert(ctx);

 	cm_set_next_context(ctx);
 }
	/*
	* Copyright (c) 2013-2014, ARM Limited and Contributors. All rights reserved.
	*
	* Redistribution and use in source and binary forms, with or without
	* modification, are permitted provided that the following conditions are met:
	*
	* Redistributions of source code must retain the above copyright notice, this
	* list of conditions and the following disclaimer.
	*
	* Redistributions in binary form must reproduce the above copyright notice,
	* this list of conditions and the following disclaimer in the documentation
	* and/or other materials provided with the distribution.
	*
	* Neither the name of ARM nor the names of its contributors may be used
	* to endorse or promote products derived from this software without specific
	* prior written permission.
	*
	* THIS SOFTWARE IS PROVIDED BY THE COPYRIGHT HOLDERS AND CONTRIBUTORS "AS IS"
	* AND ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE
	* IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE
	* ARE DISCLAIMED. IN NO EVENT SHALL THE COPYRIGHT HOLDER OR CONTRIBUTORS BE
	* LIABLE FOR ANY DIRECT, INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY, OR
	* CONSEQUENTIAL DAMAGES (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF
	* SUBSTITUTE GOODS OR SERVICES; LOSS OF USE, DATA, OR PROFITS; OR BUSINESS
	* INTERRUPTION) HOWEVER CAUSED AND ON ANY THEORY OF LIABILITY, WHETHER IN
	* CONTRACT, STRICT LIABILITY, OR TORT (INCLUDING NEGLIGENCE OR OTHERWISE)
	* ARISING IN ANY WAY OUT OF THE USE OF THIS SOFTWARE, EVEN IF ADVISED OF THE
	* POSSIBILITY OF SUCH DAMAGE.
	*/

	#include <arch.h>
	#include <arch_helpers.h>
	#include <assert.h>
	#include <bl_common.h>
	#include <bl31.h>
	#include <context.h>
	#include <context_mgmt.h>
	#include <cpu_data.h>
	#include <interrupt_mgmt.h>
	#include <platform.h>
	#include <platform_def.h>
	#include <runtime_svc.h>
	#include <string.h>


	/*******************************************************************************
	* Context management library initialisation routine. This library is used by
	* runtime services to share pointers to 'cpu_context' structures for the secure
	* and non-secure states. Management of the structures and their associated
	* memory is not done by the context management library e.g. the PSCI service
	* manages the cpu context used for entry from and exit to the non-secure state.
	* The Secure payload dispatcher service manages the context(s) corresponding to
	* the secure state. It also uses this library to get access to the non-secure
	* state cpu context pointers.
	* Lastly, this library provides the api to make SP_EL3 point to the cpu context
	* which will used for programming an entry into a lower EL. The same context
	* will used to save state upon exception entry from that EL.
	******************************************************************************/
	void cm_init(void)
	{
	/*
	* The context management library has only global data to intialize, but
	* that will be done when the BSS is zeroed out
	*/
	}

	/*******************************************************************************
	* This function returns a pointer to the most recent 'cpu_context' structure
	* for the CPU identified by MPIDR that was set as the context for the specified
	* security state. NULL is returned if no such structure has been specified.
	******************************************************************************/
	void *cm_get_context_by_mpidr(uint64_t mpidr, uint32_t security_state)
	{
	assert(sec_state_is_valid(security_state));

	return get_cpu_data_by_mpidr(mpidr, cpu_context[security_state]);
	}

	/*******************************************************************************
	* This function sets the pointer to the current 'cpu_context' structure for the
	* specified security state for the CPU identified by MPIDR
	******************************************************************************/
	void cm_set_context_by_mpidr(uint64_t mpidr, void *context, uint32_t security_state)
	{
	assert(sec_state_is_valid(security_state));

	set_cpu_data_by_mpidr(mpidr, cpu_context[security_state], context);
	}

	/*******************************************************************************
	* This function is used to program the context that's used for exception
	* return. This initializes the SP_EL3 to a pointer to a 'cpu_context' set for
	* the required security state
	******************************************************************************/
	static inline void cm_set_next_context(void *context)
	{
	#if DEBUG
	uint64_t sp_mode;

	/*
	* Check that this function is called with SP_EL0 as the stack
	* pointer
	*/
	__asm__ volatile("mrs %0, SPSel\n"
	: "=r" (sp_mode));

	assert(sp_mode == MODE_SP_EL0);
	#endif

	__asm__ volatile("msr spsel, #1\n"
	"mov sp, %0\n"
	"msr spsel, #0\n"
	: : "r" (context));
	}

	/*******************************************************************************
	* The following function initializes a cpu_context for the current CPU for
	* first use, and sets the initial entrypoint state as specified by the
	* entry_point_info structure.
	*
	* The security state to initialize is determined by the SECURE attribute
	* of the entry_point_info. The function returns a pointer to the initialized
	* context and sets this as the next context to return to.
	*
	* The EE and ST attributes are used to configure the endianess and secure
	* timer availability for the new excution context.
	*
	* To prepare the register state for entry call cm_prepare_el3_exit() and
	* el3_exit(). For Secure-EL1 cm_prepare_el3_exit() is equivalent to
	* cm_e1_sysreg_context_restore().
	******************************************************************************/
	void cm_init_context(uint64_t mpidr, const entry_point_info_t *ep)
	{
	uint32_t security_state;
	cpu_context_t *ctx;
	uint32_t scr_el3;
	el3_state_t *state;
	gp_regs_t *gp_regs;
	unsigned long sctlr_elx;

	security_state = GET_SECURITY_STATE(ep->h.attr);
	ctx = cm_get_context_by_mpidr(mpidr, security_state);
	assert(ctx);

	/* Clear any residual register values from the context */
	memset(ctx, 0, sizeof(*ctx));

	/*
	* Base the context SCR on the current value, adjust for entry point
	* specific requirements and set trap bits from the IMF
	* TODO: provide the base/global SCR bits using another mechanism?
	*/
	scr_el3 = read_scr();
	scr_el3 &= ~(SCR_NS_BIT \| SCR_RW_BIT \| SCR_FIQ_BIT \| SCR_IRQ_BIT \|
	SCR_ST_BIT \| SCR_HCE_BIT);

	if (security_state != SECURE)
	scr_el3 \|= SCR_NS_BIT;

	if (GET_RW(ep->spsr) == MODE_RW_64)
	scr_el3 \|= SCR_RW_BIT;

	if (EP_GET_ST(ep->h.attr))
	scr_el3 \|= SCR_ST_BIT;

	scr_el3 \|= get_scr_el3_from_routing_model(security_state);

	/*
	* Set up SCTLR_ELx for the target exception level:
	* EE bit is taken from the entrpoint attributes
	* M, C and I bits must be zero (as required by PSCI specification)
	*
	* The target exception level is based on the spsr mode requested.
	* If execution is requested to EL2 or hyp mode, HVC is enabled
	* via SCR_EL3.HCE.
	*
	* Always compute the SCTLR_EL1 value and save in the cpu_context
	* - the EL2 registers are set up by cm_preapre_ns_entry() as they
	* are not part of the stored cpu_context
	*
	* TODO: In debug builds the spsr should be validated and checked
	* against the CPU support, security state, endianess and pc
	*/
	sctlr_elx = EP_GET_EE(ep->h.attr) ? SCTLR_EE_BIT : 0;
	sctlr_elx \|= SCTLR_EL1_RES1;
	write_ctx_reg(get_sysregs_ctx(ctx), CTX_SCTLR_EL1, sctlr_elx);

	if ((GET_RW(ep->spsr) == MODE_RW_64
	&& GET_EL(ep->spsr) == MODE_EL2)
	\|\| (GET_RW(ep->spsr) != MODE_RW_64
	&& GET_M32(ep->spsr) == MODE32_hyp)) {
	scr_el3 \|= SCR_HCE_BIT;
	}

	/* Populate EL3 state so that we've the right context before doing ERET */
	state = get_el3state_ctx(ctx);
	write_ctx_reg(state, CTX_SCR_EL3, scr_el3);
	write_ctx_reg(state, CTX_ELR_EL3, ep->pc);
	write_ctx_reg(state, CTX_SPSR_EL3, ep->spsr);

	/*
	* Store the X0-X7 value from the entrypoint into the context
	* Use memcpy as we are in control of the layout of the structures
	*/
	gp_regs = get_gpregs_ctx(ctx);
	memcpy(gp_regs, (void *)&ep->args, sizeof(aapcs64_params_t));
	}

	/*******************************************************************************
	* Prepare the CPU system registers for first entry into secure or normal world
	*
	* If execution is requested to EL2 or hyp mode, SCTLR_EL2 is initialized
	* If execution is requested to non-secure EL1 or svc mode, and the CPU supports
	* EL2 then EL2 is disabled by configuring all necessary EL2 registers.
	* For all entries, the EL1 registers are initialized from the cpu_context
	******************************************************************************/
	void cm_prepare_el3_exit(uint32_t security_state)
	{
	uint32_t sctlr_elx, scr_el3, cptr_el2;
	cpu_context_t *ctx = cm_get_context(security_state);

	assert(ctx);

	if (security_state == NON_SECURE) {
	scr_el3 = read_ctx_reg(get_el3state_ctx(ctx), CTX_SCR_EL3);
	if (scr_el3 & SCR_HCE_BIT) {
	/* Use SCTLR_EL1.EE value to initialise sctlr_el2 */
	sctlr_elx = read_ctx_reg(get_sysregs_ctx(ctx),
	CTX_SCTLR_EL1);
	sctlr_elx &= ~SCTLR_EE_BIT;
	sctlr_elx \|= SCTLR_EL2_RES1;
	write_sctlr_el2(sctlr_elx);
	} else if (read_id_aa64pfr0_el1() &
	(ID_AA64PFR0_ELX_MASK << ID_AA64PFR0_EL2_SHIFT)) {
	/* EL2 present but unused, need to disable safely */

	/* HCR_EL2 = 0, except RW bit set to match SCR_EL3 */
	write_hcr_el2((scr_el3 & SCR_RW_BIT) ? HCR_RW_BIT : 0);

	/* SCTLR_EL2 : can be ignored when bypassing */

	/* CPTR_EL2 : disable all traps TCPAC, TTA, TFP */
	cptr_el2 = read_cptr_el2();
	cptr_el2 &= ~(TCPAC_BIT \| TTA_BIT \| TFP_BIT);
	write_cptr_el2(cptr_el2);

	/* Enable EL1 access to timer */
	write_cnthctl_el2(EL1PCEN_BIT \| EL1PCTEN_BIT);

	/* Set VPIDR, VMPIDR to match MIDR, MPIDR */
	write_vpidr_el2(read_midr_el1());
	write_vmpidr_el2(read_mpidr_el1());
	}
	}

	el1_sysregs_context_restore(get_sysregs_ctx(ctx));

	cm_set_next_context(ctx);
	}

	/*******************************************************************************
	* The next four functions are used by runtime services to save and restore EL3
	* and EL1 contexts on the 'cpu_context' structure for the specified security
	* state.
	******************************************************************************/
	void cm_el3_sysregs_context_save(uint32_t security_state)
	{
	cpu_context_t *ctx;

	ctx = cm_get_context(security_state);
	assert(ctx);

	el3_sysregs_context_save(get_el3state_ctx(ctx));
	}

	void cm_el3_sysregs_context_restore(uint32_t security_state)
	{
	cpu_context_t *ctx;

	ctx = cm_get_context(security_state);
	assert(ctx);

	el3_sysregs_context_restore(get_el3state_ctx(ctx));
	}

	void cm_el1_sysregs_context_save(uint32_t security_state)
	{
	cpu_context_t *ctx;

	ctx = cm_get_context(security_state);
	assert(ctx);

	el1_sysregs_context_save(get_sysregs_ctx(ctx));
	}

	void cm_el1_sysregs_context_restore(uint32_t security_state)
	{
	cpu_context_t *ctx;

	ctx = cm_get_context(security_state);
	assert(ctx);

	el1_sysregs_context_restore(get_sysregs_ctx(ctx));
	}

	/*******************************************************************************
	* This function populates ELR_EL3 member of 'cpu_context' pertaining to the
	* given security state with the given entrypoint
	******************************************************************************/
	void cm_set_elr_el3(uint32_t security_state, uint64_t entrypoint)
	{
	cpu_context_t *ctx;
	el3_state_t *state;

	ctx = cm_get_context(security_state);
	assert(ctx);

	/* Populate EL3 state so that ERET jumps to the correct entry */
	state = get_el3state_ctx(ctx);
	write_ctx_reg(state, CTX_ELR_EL3, entrypoint);
	}

	/*******************************************************************************
	* This function populates ELR_EL3 and SPSR_EL3 members of 'cpu_context'
	* pertaining to the given security state
	******************************************************************************/
	void cm_set_elr_spsr_el3(uint32_t security_state,
	uint64_t entrypoint, uint32_t spsr)
	{
	cpu_context_t *ctx;
	el3_state_t *state;

	ctx = cm_get_context(security_state);
	assert(ctx);

	/* Populate EL3 state so that ERET jumps to the correct entry */
	state = get_el3state_ctx(ctx);
	write_ctx_reg(state, CTX_ELR_EL3, entrypoint);
	write_ctx_reg(state, CTX_SPSR_EL3, spsr);
	}

	/*******************************************************************************
	* This function updates a single bit in the SCR_EL3 member of the 'cpu_context'
	* pertaining to the given security state using the value and bit position
	* specified in the parameters. It preserves all other bits.
	******************************************************************************/
	void cm_write_scr_el3_bit(uint32_t security_state,
	uint32_t bit_pos,
	uint32_t value)
	{
	cpu_context_t *ctx;
	el3_state_t *state;
	uint32_t scr_el3;

	ctx = cm_get_context(security_state);
	assert(ctx);

	/* Ensure that the bit position is a valid one */
	assert((1 << bit_pos) & SCR_VALID_BIT_MASK);

	/* Ensure that the 'value' is only a bit wide */
	assert(value <= 1);

	/*
	* Get the SCR_EL3 value from the cpu context, clear the desired bit
	* and set it to its new value.
	*/
	state = get_el3state_ctx(ctx);
	scr_el3 = read_ctx_reg(state, CTX_SCR_EL3);
	scr_el3 &= ~(1 << bit_pos);
	scr_el3 \|= value << bit_pos;
	write_ctx_reg(state, CTX_SCR_EL3, scr_el3);
	}

	/*******************************************************************************
	* This function retrieves SCR_EL3 member of 'cpu_context' pertaining to the
	* given security state.
	******************************************************************************/
	uint32_t cm_get_scr_el3(uint32_t security_state)
	{
	cpu_context_t *ctx;
	el3_state_t *state;

	ctx = cm_get_context(security_state);
	assert(ctx);

	/* Populate EL3 state so that ERET jumps to the correct entry */
	state = get_el3state_ctx(ctx);
	return read_ctx_reg(state, CTX_SCR_EL3);
	}

	/*******************************************************************************
	* This function is used to program the context that's used for exception
	* return. This initializes the SP_EL3 to a pointer to a 'cpu_context' set for
	* the required security state
	******************************************************************************/
	void cm_set_next_eret_context(uint32_t security_state)
	{
	cpu_context_t *ctx;

	ctx = cm_get_context(security_state);
	assert(ctx);

	cm_set_next_context(ctx);
	}