blob: bc906e3949fc7e49c6e26297133def94a7b64d3e [file] [log] [blame]
/*
* Copyright (c) 2019, Linaro Limited
* Copyright (c) 2019, Ying-Chun Liu (PaulLiu) <paul.liu@linaro.org>
*
* SPDX-License-Identifier: BSD-3-Clause
*/
#ifndef RPI3_SDHOST_H
#define RPI3_SDHOST_H
#include <drivers/mmc.h>
#include <stdint.h>
#include <platform_def.h>
struct rpi3_sdhost_params {
uintptr_t reg_base;
uint32_t clk_rate;
uint32_t bus_width;
uint32_t flags;
uint32_t current_cmd;
uint8_t cmdbusy;
uint8_t mmc_app_cmd;
uint32_t ns_per_fifo_word;
uint32_t crc_err_retries;
uint32_t sdcard_rca;
uint32_t gpio48_pinselect[6];
};
void rpi3_sdhost_init(struct rpi3_sdhost_params *params,
struct mmc_device_info *mmc_dev_info);
void rpi3_sdhost_stop(void);
/* Registers */
#define HC_COMMAND 0x00 /* Command and flags */
#define HC_ARGUMENT 0x04
#define HC_TIMEOUTCOUNTER 0x08
#define HC_CLOCKDIVISOR 0x0c
#define HC_RESPONSE_0 0x10
#define HC_RESPONSE_1 0x14
#define HC_RESPONSE_2 0x18
#define HC_RESPONSE_3 0x1c
#define HC_HOSTSTATUS 0x20
#define HC_POWER 0x30
#define HC_DEBUG 0x34
#define HC_HOSTCONFIG 0x38
#define HC_BLOCKSIZE 0x3c
#define HC_DATAPORT 0x40
#define HC_BLOCKCOUNT 0x50
/* Flags for HC_COMMAND register */
#define HC_CMD_ENABLE 0x8000
#define HC_CMD_FAILED 0x4000
#define HC_CMD_BUSY 0x0800
#define HC_CMD_RESPONSE_NONE 0x0400
#define HC_CMD_RESPONSE_LONG 0x0200
#define HC_CMD_WRITE 0x0080
#define HC_CMD_READ 0x0040
#define HC_CMD_COMMAND_MASK 0x003f
#define HC_CLOCKDIVISOR_MAXVAL 0x07ff
#define HC_CLOCKDIVISOR_PREFERVAL 0x027b
#define HC_CLOCKDIVISOR_SLOWVAL 0x0148
#define HC_CLOCKDIVISOR_STOPVAL 0x01fb
/* Flags for HC_HOSTSTATUS register */
#define HC_HSTST_HAVEDATA 0x0001
#define HC_HSTST_ERROR_FIFO 0x0008
#define HC_HSTST_ERROR_CRC7 0x0010
#define HC_HSTST_ERROR_CRC16 0x0020
#define HC_HSTST_TIMEOUT_CMD 0x0040
#define HC_HSTST_TIMEOUT_DATA 0x0080
#define HC_HSTST_INT_BLOCK 0x0200
#define HC_HSTST_INT_BUSY 0x0400
#define HC_HSTST_RESET 0xffff
#define HC_HSTST_MASK_ERROR_DATA (HC_HSTST_ERROR_FIFO | \
HC_HSTST_ERROR_CRC7 | \
HC_HSTST_ERROR_CRC16 | \
HC_HSTST_TIMEOUT_DATA)
#define HC_HSTST_MASK_ERROR_ALL (HC_HSTST_MASK_ERROR_DATA | \
HC_HSTST_TIMEOUT_CMD)
/* Flags for HC_HOSTCONFIG register */
#define HC_HSTCF_INTBUS_WIDE 0x0002
#define HC_HSTCF_EXTBUS_4BIT 0x0004
#define HC_HSTCF_SLOW_CARD 0x0008
#define HC_HSTCF_INT_DATA 0x0010
#define HC_HSTCF_INT_BLOCK 0x0100
#define HC_HSTCF_INT_BUSY 0x0400
/* Flags for HC_DEBUG register */
#define HC_DBG_FIFO_THRESH_WRITE_SHIFT 9
#define HC_DBG_FIFO_THRESH_READ_SHIFT 14
#define HC_DBG_FIFO_THRESH_MASK 0x001f
#define HC_DBG_FSM_MASK 0xf
#define HC_DBG_FSM_IDENTMODE 0x0
#define HC_DBG_FSM_DATAMODE 0x1
#define HC_DBG_FSM_READDATA 0x2
#define HC_DBG_FSM_WRITEDATA 0x3
#define HC_DBG_FSM_READWAIT 0x4
#define HC_DBG_FSM_READCRC 0x5
#define HC_DBG_FSM_WRITECRC 0x6
#define HC_DBG_FSM_WRITEWAIT1 0x7
#define HC_DBG_FSM_POWERDOWN 0x8
#define HC_DBG_FSM_POWERUP 0x9
#define HC_DBG_FSM_WRITESTART1 0xa
#define HC_DBG_FSM_WRITESTART2 0xb
#define HC_DBG_FSM_GENPULSES 0xc
#define HC_DBG_FSM_WRITEWAIT2 0xd
#define HC_DBG_FSM_STARTPOWDOWN 0xf
#define HC_DBG_FORCE_DATA_MODE 0x40000
/* Settings */
#define HC_FIFO_SIZE 16
#define HC_FIFO_THRESH_READ 4
#define HC_FIFO_THRESH_WRITE 4
#define HC_TIMEOUT_DEFAULT 0x00f00000
#define HC_TIMEOUT_IDLE 0x00a00000
#endif /* RPI3_SDHOST_H */