| /* |
| * Copyright (c) 2023-2024, STMicroelectronics - All Rights Reserved |
| * |
| * SPDX-License-Identifier: BSD-3-Clause |
| */ |
| |
| #ifndef STM32MP2_DEF_H |
| #define STM32MP2_DEF_H |
| |
| #include <common/tbbr/tbbr_img_def.h> |
| #ifndef __ASSEMBLER__ |
| #include <drivers/st/bsec.h> |
| #endif |
| #include <drivers/st/stm32mp25_rcc.h> |
| #include <dt-bindings/clock/stm32mp25-clks.h> |
| #include <dt-bindings/clock/stm32mp25-clksrc.h> |
| #include <dt-bindings/reset/stm32mp25-resets.h> |
| |
| #ifndef __ASSEMBLER__ |
| #include <boot_api.h> |
| #include <stm32mp2_private.h> |
| #include <stm32mp_common.h> |
| #include <stm32mp_dt.h> |
| #include <stm32mp_shared_resources.h> |
| #endif |
| |
| /******************************************************************************* |
| * STM32MP2 memory map related constants |
| ******************************************************************************/ |
| #define STM32MP_SYSRAM_BASE U(0x0E000000) |
| #define STM32MP_SYSRAM_SIZE U(0x00040000) |
| |
| #define STM32MP_SEC_SYSRAM_BASE STM32MP_SYSRAM_BASE |
| #define STM32MP_SEC_SYSRAM_SIZE STM32MP_SYSRAM_SIZE |
| |
| /* DDR configuration */ |
| #define STM32MP_DDR_BASE U(0x80000000) |
| #define STM32MP_DDR_MAX_SIZE UL(0x100000000) /* Max 4GB */ |
| |
| /* DDR power initializations */ |
| #ifndef __ASSEMBLER__ |
| enum ddr_type { |
| STM32MP_DDR3, |
| STM32MP_DDR4, |
| STM32MP_LPDDR4 |
| }; |
| #endif |
| |
| /* Section used inside TF binaries */ |
| #define STM32MP_PARAM_LOAD_SIZE U(0x00002400) /* 9 KB for param */ |
| /* 512 Octets reserved for header */ |
| #define STM32MP_HEADER_SIZE U(0x00000200) |
| #define STM32MP_HEADER_BASE (STM32MP_SEC_SYSRAM_BASE + \ |
| STM32MP_PARAM_LOAD_SIZE) |
| |
| /* round_up(STM32MP_PARAM_LOAD_SIZE + STM32MP_HEADER_SIZE, PAGE_SIZE) */ |
| #define STM32MP_HEADER_RESERVED_SIZE U(0x3000) |
| |
| #define STM32MP_BINARY_BASE (STM32MP_SEC_SYSRAM_BASE + \ |
| STM32MP_PARAM_LOAD_SIZE + \ |
| STM32MP_HEADER_SIZE) |
| |
| #define STM32MP_BINARY_SIZE (STM32MP_SEC_SYSRAM_SIZE - \ |
| (STM32MP_PARAM_LOAD_SIZE + \ |
| STM32MP_HEADER_SIZE)) |
| |
| #define STM32MP_BL2_SIZE U(0x0002A000) /* 168 KB for BL2 */ |
| |
| #define STM32MP_BL2_BASE (STM32MP_SEC_SYSRAM_BASE + \ |
| STM32MP_SEC_SYSRAM_SIZE - \ |
| STM32MP_BL2_SIZE) |
| |
| /* BL2 and BL32/sp_min require 4 tables */ |
| #define MAX_XLAT_TABLES U(4) /* 16 KB for mapping */ |
| |
| /* |
| * MAX_MMAP_REGIONS is usually: |
| * BL stm32mp2_mmap size + mmap regions in *_plat_arch_setup |
| */ |
| #define MAX_MMAP_REGIONS 6 |
| |
| /* DTB initialization value */ |
| #define STM32MP_BL2_DTB_SIZE U(0x00005000) /* 20 KB for DTB */ |
| |
| #define STM32MP_BL2_DTB_BASE (STM32MP_BL2_BASE - \ |
| STM32MP_BL2_DTB_SIZE) |
| |
| #define STM32MP_BL33_BASE (STM32MP_DDR_BASE + U(0x04000000)) |
| #define STM32MP_BL33_MAX_SIZE U(0x400000) |
| |
| /******************************************************************************* |
| * STM32MP2 RCC |
| ******************************************************************************/ |
| #define RCC_BASE U(0x44200000) |
| |
| /******************************************************************************* |
| * STM32MP2 PWR |
| ******************************************************************************/ |
| #define PWR_BASE U(0x44210000) |
| |
| /******************************************************************************* |
| * STM32MP2 GPIO |
| ******************************************************************************/ |
| #define GPIOA_BASE U(0x44240000) |
| #define GPIOB_BASE U(0x44250000) |
| #define GPIOC_BASE U(0x44260000) |
| #define GPIOD_BASE U(0x44270000) |
| #define GPIOE_BASE U(0x44280000) |
| #define GPIOF_BASE U(0x44290000) |
| #define GPIOG_BASE U(0x442A0000) |
| #define GPIOH_BASE U(0x442B0000) |
| #define GPIOI_BASE U(0x442C0000) |
| #define GPIOJ_BASE U(0x442D0000) |
| #define GPIOK_BASE U(0x442E0000) |
| #define GPIOZ_BASE U(0x46200000) |
| #define GPIO_BANK_OFFSET U(0x10000) |
| |
| #define STM32MP_GPIOS_PIN_MAX_COUNT 16 |
| #define STM32MP_GPIOZ_PIN_MAX_COUNT 8 |
| |
| /******************************************************************************* |
| * STM32MP2 UART |
| ******************************************************************************/ |
| #define USART1_BASE U(0x40330000) |
| #define USART2_BASE U(0x400E0000) |
| #define USART3_BASE U(0x400F0000) |
| #define UART4_BASE U(0x40100000) |
| #define UART5_BASE U(0x40110000) |
| #define USART6_BASE U(0x40220000) |
| #define UART7_BASE U(0x40370000) |
| #define UART8_BASE U(0x40380000) |
| #define UART9_BASE U(0x402C0000) |
| #define STM32MP_NB_OF_UART U(9) |
| |
| /* For UART crash console */ |
| #define STM32MP_DEBUG_USART_CLK_FRQ 64000000 |
| /* USART2 on HSI@64MHz, TX on GPIOA4 Alternate 6 */ |
| #define STM32MP_DEBUG_USART_BASE USART2_BASE |
| #define DEBUG_UART_TX_GPIO_BANK_ADDRESS GPIOA_BASE |
| #define DEBUG_UART_TX_GPIO_BANK_CLK_REG RCC_GPIOACFGR |
| #define DEBUG_UART_TX_GPIO_BANK_CLK_EN RCC_GPIOxCFGR_GPIOxEN |
| #define DEBUG_UART_TX_GPIO_PORT 4 |
| #define DEBUG_UART_TX_GPIO_ALTERNATE 6 |
| #define DEBUG_UART_TX_CLKSRC_REG RCC_XBAR8CFGR |
| #define DEBUG_UART_TX_CLKSRC XBAR_SRC_HSI |
| #define DEBUG_UART_TX_EN_REG RCC_USART2CFGR |
| #define DEBUG_UART_TX_EN RCC_UARTxCFGR_UARTxEN |
| #define DEBUG_UART_RST_REG RCC_USART2CFGR |
| #define DEBUG_UART_RST_BIT RCC_UARTxCFGR_UARTxRST |
| #define DEBUG_UART_PREDIV_CFGR RCC_PREDIV8CFGR |
| #define DEBUG_UART_FINDIV_CFGR RCC_FINDIV8CFGR |
| |
| /******************************************************************************* |
| * STM32MP2 SDMMC |
| ******************************************************************************/ |
| #define STM32MP_SDMMC1_BASE U(0x48220000) |
| #define STM32MP_SDMMC2_BASE U(0x48230000) |
| #define STM32MP_SDMMC3_BASE U(0x48240000) |
| |
| /******************************************************************************* |
| * STM32MP2 TAMP |
| ******************************************************************************/ |
| #define PLAT_MAX_TAMP_INT U(5) |
| #define PLAT_MAX_TAMP_EXT U(3) |
| #define TAMP_BASE U(0x46010000) |
| #define TAMP_SMCR (TAMP_BASE + U(0x20)) |
| #define TAMP_BKP_REGISTER_BASE (TAMP_BASE + U(0x100)) |
| #define TAMP_BKP_REG_CLK CK_BUS_RTC |
| #define TAMP_BKP_SEC_NUMBER U(10) |
| #define TAMP_COUNTR U(0x40) |
| |
| #if !(defined(__LINKER__) || defined(__ASSEMBLER__)) |
| static inline uintptr_t tamp_bkpr(uint32_t idx) |
| { |
| return TAMP_BKP_REGISTER_BASE + (idx << 2); |
| } |
| #endif |
| |
| /******************************************************************************* |
| * STM32MP2 DDRCTRL |
| ******************************************************************************/ |
| #define DDRCTRL_BASE U(0x48040000) |
| |
| /******************************************************************************* |
| * STM32MP2 DDRDBG |
| ******************************************************************************/ |
| #define DDRDBG_BASE U(0x48050000) |
| |
| /******************************************************************************* |
| * STM32MP2 DDRPHYC |
| ******************************************************************************/ |
| #define DDRPHYC_BASE U(0x48C00000) |
| |
| /******************************************************************************* |
| * Miscellaneous STM32MP1 peripherals base address |
| ******************************************************************************/ |
| #define BSEC_BASE U(0x44000000) |
| #define DBGMCU_BASE U(0x4A010000) |
| #define HASH_BASE U(0x42010000) |
| #define RTC_BASE U(0x46000000) |
| #define STGEN_BASE U(0x48080000) |
| #define SYSCFG_BASE U(0x44230000) |
| |
| /******************************************************************************* |
| * REGULATORS |
| ******************************************************************************/ |
| /* 3 PWR + 1 VREFBUF + 14 PMIC regulators + 1 FIXED */ |
| #define PLAT_NB_RDEVS U(19) |
| /* 2 FIXED */ |
| #define PLAT_NB_FIXED_REGUS U(2) |
| /* No GPIO regu */ |
| #define PLAT_NB_GPIO_REGUS U(0) |
| |
| /******************************************************************************* |
| * Device Tree defines |
| ******************************************************************************/ |
| #define DT_BSEC_COMPAT "st,stm32mp25-bsec" |
| #define DT_DDR_COMPAT "st,stm32mp2-ddr" |
| #define DT_PWR_COMPAT "st,stm32mp25-pwr" |
| #define DT_RCC_CLK_COMPAT "st,stm32mp25-rcc" |
| #define DT_UART_COMPAT "st,stm32h7-uart" |
| |
| #endif /* STM32MP2_DEF_H */ |