layerscape: Initial TF-A support for LS1043ardb
This patch introduce TF-A support for NXP's ls1043a platform.
more details information of ls1043a chip and ls1043ardb board
can be found at docs/plat/ls1043a.rst.
Boot sequence on ls1043a is: bootrom loads bl1 firstly, then bl1
loads bl2, bl2 will load bl31, bl32 and bl33, bl31 will boot
bl32(tee os) and bl33(u-boot or uefi), bl33 boot Linux kernel.
Now TF-A on ls1043ardb platform has the following features in this patch:
* Support boot from Nor flash.
* TF-A can boot bl33 which runs in el2 of non-secure world.
* TF-A boot OPTee OS.
* Support PSCI
Signed-off-by: Jiafei Pan <Jiafei.Pan@nxp.com>
Signed-off-by: Chenyin.Ha <Chenyin.Ha@nxp.com>
Signed-off-by: Chenhui Zhao <chenhui.zhao@nxp.com>
Signed-off-by: jiaheng.fan <jiaheng.fan@nxp.com>
Signed-off-by: Wen He <wen.he_1@nxp.com>
diff --git a/plat/layerscape/common/include/fsl_csu.h b/plat/layerscape/common/include/fsl_csu.h
new file mode 100644
index 0000000..680911e
--- /dev/null
+++ b/plat/layerscape/common/include/fsl_csu.h
@@ -0,0 +1,33 @@
+/*
+ * Copyright (c) 2018, ARM Limited and Contributors. All rights reserved.
+ *
+ * SPDX-License-Identifier: BSD-3-Clause
+ */
+
+#ifndef __FSL_CSU_H__
+#define __FSL_CSU_H__
+
+enum csu_cslx_access {
+ CSU_NS_SUP_R = 0x08,
+ CSU_NS_SUP_W = 0x80,
+ CSU_NS_SUP_RW = 0x88,
+ CSU_NS_USER_R = 0x04,
+ CSU_NS_USER_W = 0x40,
+ CSU_NS_USER_RW = 0x44,
+ CSU_S_SUP_R = 0x02,
+ CSU_S_SUP_W = 0x20,
+ CSU_S_SUP_RW = 0x22,
+ CSU_S_USER_R = 0x01,
+ CSU_S_USER_W = 0x10,
+ CSU_S_USER_RW = 0x11,
+ CSU_ALL_RW = 0xff,
+};
+
+struct csu_ns_dev {
+ uintptr_t ind;
+ uint32_t val;
+};
+
+void enable_layerscape_ns_access(void);
+
+#endif