| /* |
| * Copyright (c) 2016, ARM Limited and Contributors. All rights reserved. |
| * |
| * SPDX-License-Identifier: BSD-3-Clause |
| */ |
| |
| #include <platform_def.h> |
| |
| #include <arch_helpers.h> |
| #include <common/debug.h> |
| #include <lib/mmio.h> |
| |
| #include <plat_private.h> |
| #include <rk3288_def.h> |
| #include <soc.h> |
| #include <secure.h> |
| |
| /* sleep data for pll suspend */ |
| static struct deepsleep_data_s slp_data; |
| |
| /* Table of regions to map using the MMU. */ |
| const mmap_region_t plat_rk_mmap[] = { |
| MAP_REGION_FLAT(GIC400_BASE, GIC400_SIZE, |
| MT_DEVICE | MT_RW | MT_SECURE), |
| MAP_REGION_FLAT(STIME_BASE, STIME_SIZE, |
| MT_DEVICE | MT_RW | MT_SECURE), |
| MAP_REGION_FLAT(SGRF_BASE, SGRF_SIZE, |
| MT_DEVICE | MT_RW | MT_SECURE), |
| MAP_REGION_FLAT(TZPC_BASE, TZPC_SIZE, |
| MT_DEVICE | MT_RW | MT_SECURE), |
| MAP_REGION_FLAT(PMUSRAM_BASE, PMUSRAM_SIZE, |
| MT_MEMORY | MT_RW | MT_SECURE), |
| MAP_REGION_FLAT(SRAM_BASE, SRAM_SIZE, |
| MT_DEVICE | MT_RW | MT_SECURE), |
| MAP_REGION_FLAT(PMU_BASE, PMU_SIZE, |
| MT_DEVICE | MT_RW | MT_SECURE), |
| MAP_REGION_FLAT(UART0_BASE, UART0_SIZE, |
| MT_DEVICE | MT_RW | MT_SECURE), |
| MAP_REGION_FLAT(UART1_BASE, UART1_SIZE, |
| MT_DEVICE | MT_RW | MT_SECURE), |
| MAP_REGION_FLAT(UART2_BASE, UART2_SIZE, |
| MT_DEVICE | MT_RW | MT_SECURE), |
| MAP_REGION_FLAT(UART3_BASE, UART3_SIZE, |
| MT_DEVICE | MT_RW | MT_SECURE), |
| MAP_REGION_FLAT(UART4_BASE, UART4_SIZE, |
| MT_DEVICE | MT_RW | MT_SECURE), |
| MAP_REGION_FLAT(CRU_BASE, CRU_SIZE, |
| MT_DEVICE | MT_RW | MT_SECURE), |
| MAP_REGION_FLAT(GRF_BASE, GRF_SIZE, |
| MT_DEVICE | MT_RW | MT_SECURE), |
| MAP_REGION_FLAT(DDR_PCTL0_BASE, DDR_PCTL0_SIZE, |
| MT_DEVICE | MT_RW | MT_SECURE), |
| MAP_REGION_FLAT(DDR_PHY0_BASE, DDR_PHY0_SIZE, |
| MT_DEVICE | MT_RW | MT_SECURE), |
| MAP_REGION_FLAT(DDR_PCTL1_BASE, DDR_PCTL1_SIZE, |
| MT_DEVICE | MT_RW | MT_SECURE), |
| MAP_REGION_FLAT(DDR_PHY1_BASE, DDR_PHY1_SIZE, |
| MT_DEVICE | MT_RW | MT_SECURE), |
| MAP_REGION_FLAT(SERVICE_BUS_BASE, SERVICE_BUS_SIZE, |
| MT_DEVICE | MT_RW | MT_SECURE), |
| MAP_REGION_FLAT(CORE_AXI_BUS_BASE, CORE_AXI_BUS_SIZE, |
| MT_DEVICE | MT_RW | MT_SECURE), |
| { 0 } |
| }; |
| |
| /* The RockChip power domain tree descriptor */ |
| const unsigned char rockchip_power_domain_tree_desc[] = { |
| /* No of root nodes */ |
| PLATFORM_SYSTEM_COUNT, |
| /* No of children for the root node */ |
| PLATFORM_CLUSTER_COUNT, |
| /* No of children for the first cluster node */ |
| PLATFORM_CLUSTER0_CORE_COUNT, |
| }; |
| |
| void plat_rockchip_soc_init(void) |
| { |
| secure_timer_init(); |
| secure_sgrf_init(); |
| /* |
| * We cannot enable ddr security at this point, as the kernel |
| * seems to have an issue with it even living in the same 128MB |
| * memory block. Only when moving the kernel to the second |
| * 128MB block does it not conflict, but then we'd loose this |
| * memory area for use. Late maybe enable |
| * secure_sgrf_ddr_rgn_init(); |
| */ |
| } |
| |
| void regs_update_bits(uintptr_t addr, uint32_t val, |
| uint32_t mask, uint32_t shift) |
| { |
| uint32_t tmp, orig; |
| |
| orig = mmio_read_32(addr); |
| |
| tmp = orig & ~(mask << shift); |
| tmp |= (val & mask) << shift; |
| |
| if (tmp != orig) |
| mmio_write_32(addr, tmp); |
| dsb(); |
| } |
| |
| static void pll_save(uint32_t pll_id) |
| { |
| uint32_t *pll = slp_data.pll_con[pll_id]; |
| |
| pll[0] = mmio_read_32(CRU_BASE + PLL_CONS((pll_id), 0)); |
| pll[1] = mmio_read_32(CRU_BASE + PLL_CONS((pll_id), 1)); |
| pll[2] = mmio_read_32(CRU_BASE + PLL_CONS((pll_id), 2)); |
| pll[3] = mmio_read_32(CRU_BASE + PLL_CONS((pll_id), 3)); |
| } |
| |
| void clk_plls_suspend(void) |
| { |
| pll_save(NPLL_ID); |
| pll_save(CPLL_ID); |
| pll_save(GPLL_ID); |
| pll_save(APLL_ID); |
| slp_data.pll_mode = mmio_read_32(CRU_BASE + PLL_MODE_CON); |
| |
| /* |
| * Switch PLLs other than DPLL (for SDRAM) to slow mode to |
| * avoid crashes on resume. The Mask ROM on the system will |
| * put APLL, CPLL, and GPLL into slow mode at resume time |
| * anyway (which is why we restore them), but we might not |
| * even make it to the Mask ROM if this isn't done at suspend |
| * time. |
| * |
| * NOTE: only APLL truly matters here, but we'll do them all. |
| */ |
| mmio_write_32(CRU_BASE + PLL_MODE_CON, 0xf3030000); |
| } |
| |
| void clk_plls_resume(void) |
| { |
| /* restore pll-modes */ |
| mmio_write_32(CRU_BASE + PLL_MODE_CON, |
| slp_data.pll_mode | REG_SOC_WMSK); |
| } |
| |
| void clk_gate_con_save(void) |
| { |
| uint32_t i = 0; |
| |
| for (i = 0; i < CRU_CLKGATES_CON_CNT; i++) |
| slp_data.cru_gate_con[i] = |
| mmio_read_32(CRU_BASE + CRU_CLKGATES_CON(i)); |
| } |
| |
| void clk_gate_con_disable(void) |
| { |
| uint32_t i; |
| |
| for (i = 0; i < CRU_CLKGATES_CON_CNT; i++) |
| mmio_write_32(CRU_BASE + CRU_CLKGATES_CON(i), REG_SOC_WMSK); |
| } |
| |
| void clk_gate_con_restore(void) |
| { |
| uint32_t i; |
| |
| for (i = 0; i < CRU_CLKGATES_CON_CNT; i++) |
| mmio_write_32(CRU_BASE + CRU_CLKGATES_CON(i), |
| REG_SOC_WMSK | slp_data.cru_gate_con[i]); |
| } |
| |
| void clk_sel_con_save(void) |
| { |
| uint32_t i = 0; |
| |
| for (i = 0; i < CRU_CLKSELS_CON_CNT; i++) |
| slp_data.cru_sel_con[i] = |
| mmio_read_32(CRU_BASE + CRU_CLKSELS_CON(i)); |
| } |
| |
| void clk_sel_con_restore(void) |
| { |
| uint32_t i, val; |
| |
| for (i = 0; i < CRU_CLKSELS_CON_CNT; i++) { |
| /* fractional dividers don't have write-masks */ |
| if ((i >= 7 && i <= 9) || |
| (i >= 17 && i <= 20) || |
| (i == 23) || (i == 41)) |
| val = slp_data.cru_sel_con[i]; |
| else |
| val = slp_data.cru_sel_con[i] | REG_SOC_WMSK; |
| |
| mmio_write_32(CRU_BASE + CRU_CLKSELS_CON(i), val); |
| } |
| } |
| |
| void __dead2 rockchip_soc_soft_reset(void) |
| { |
| uint32_t temp_val; |
| |
| /* |
| * Switch PLLs other than DPLL (for SDRAM) to slow mode to |
| * avoid crashes on resume. The Mask ROM on the system will |
| * put APLL, CPLL, and GPLL into slow mode at resume time |
| * anyway (which is why we restore them), but we might not |
| * even make it to the Mask ROM if this isn't done at suspend |
| * time. |
| * |
| * NOTE: only APLL truly matters here, but we'll do them all. |
| */ |
| mmio_write_32(CRU_BASE + PLL_MODE_CON, 0xf3030000); |
| |
| temp_val = mmio_read_32(CRU_BASE + CRU_GLB_RST_CON); |
| temp_val &= ~PMU_RST_MASK; |
| temp_val |= PMU_RST_BY_SECOND_SFT; |
| mmio_write_32(CRU_BASE + CRU_GLB_RST_CON, temp_val); |
| mmio_write_32(CRU_BASE + CRU_GLB_SRST_SND, 0xeca8); |
| |
| /* |
| * Maybe the HW needs some times to reset the system, |
| * so we do not hope the core to execute valid codes. |
| */ |
| while (1) |
| ; |
| } |