blob: 7186f985705f9a152ffedf94a29b0258f44c281b [file] [log] [blame]
/*
* Copyright (C) 2018 Marvell International Ltd.
*
* SPDX-License-Identifier: BSD-3-Clause
* https://spdx.org/licenses
*/
/* CP110 Marvell SoC driver */
#include <common/debug.h>
#include <drivers/delay_timer.h>
#include <drivers/marvell/amb_adec.h>
#include <drivers/marvell/iob.h>
#include <drivers/marvell/mochi/cp110_setup.h>
#include <plat_marvell.h>
/*
* AXI Configuration.
*/
/* Used for Units of CP-110 (e.g. USB device, USB Host, and etc) */
#define MVEBU_AXI_ATTR_OFFSET (0x441300)
#define MVEBU_AXI_ATTR_REG(index) (MVEBU_AXI_ATTR_OFFSET + \
0x4 * index)
/* AXI Protection bits */
#define MVEBU_AXI_PROT_OFFSET (0x441200)
/* AXI Protection regs */
#define MVEBU_AXI_PROT_REG(index) ((index <= 4) ? \
(MVEBU_AXI_PROT_OFFSET + \
0x4 * index) : \
(MVEBU_AXI_PROT_OFFSET + 0x18))
#define MVEBU_AXI_PROT_REGS_NUM (6)
#define MVEBU_SOC_CFGS_OFFSET (0x441900)
#define MVEBU_SOC_CFG_REG(index) (MVEBU_SOC_CFGS_OFFSET + \
0x4 * index)
#define MVEBU_SOC_CFG_REG_NUM (0)
#define MVEBU_SOC_CFG_GLOG_SECURE_EN_MASK (0xE)
/* SATA3 MBUS to AXI regs */
#define MVEBU_BRIDGE_WIN_DIS_REG (MVEBU_SOC_CFGS_OFFSET + 0x10)
#define MVEBU_BRIDGE_WIN_DIS_OFF (0x0)
/* SATA3 MBUS to AXI regs */
#define MVEBU_SATA_M2A_AXI_PORT_CTRL_REG (0x54ff04)
/* AXI to MBUS bridge registers */
#define MVEBU_AMB_IP_OFFSET (0x13ff00)
#define MVEBU_AMB_IP_BRIDGE_WIN_REG(win) (MVEBU_AMB_IP_OFFSET + \
(win * 0x8))
#define MVEBU_AMB_IP_BRIDGE_WIN_EN_OFFSET 0
#define MVEBU_AMB_IP_BRIDGE_WIN_EN_MASK \
(0x1 << MVEBU_AMB_IP_BRIDGE_WIN_EN_OFFSET)
#define MVEBU_AMB_IP_BRIDGE_WIN_SIZE_OFFSET 16
#define MVEBU_AMB_IP_BRIDGE_WIN_SIZE_MASK \
(0xffffu << MVEBU_AMB_IP_BRIDGE_WIN_SIZE_OFFSET)
#define MVEBU_SAMPLE_AT_RESET_REG (0x440600)
#define SAR_PCIE1_CLK_CFG_OFFSET 31
#define SAR_PCIE1_CLK_CFG_MASK (0x1u << SAR_PCIE1_CLK_CFG_OFFSET)
#define SAR_PCIE0_CLK_CFG_OFFSET 30
#define SAR_PCIE0_CLK_CFG_MASK (0x1 << SAR_PCIE0_CLK_CFG_OFFSET)
#define SAR_I2C_INIT_EN_OFFSET 24
#define SAR_I2C_INIT_EN_MASK (1 << SAR_I2C_INIT_EN_OFFSET)
/*******************************************************************************
* PCIE clock buffer control
******************************************************************************/
#define MVEBU_PCIE_REF_CLK_BUF_CTRL (0x4404F0)
#define PCIE1_REFCLK_BUFF_SOURCE 0x800
#define PCIE0_REFCLK_BUFF_SOURCE 0x400
/*******************************************************************************
* MSS Device Push Set Register
******************************************************************************/
#define MVEBU_CP_MSS_DPSHSR_REG (0x280040)
#define MSS_DPSHSR_REG_PCIE_CLK_SEL 0x8
/*******************************************************************************
* RTC Configuration
******************************************************************************/
#define MVEBU_RTC_BASE (0x284000)
#define MVEBU_RTC_STATUS_REG (MVEBU_RTC_BASE + 0x0)
#define MVEBU_RTC_STATUS_ALARM1_MASK 0x1
#define MVEBU_RTC_STATUS_ALARM2_MASK 0x2
#define MVEBU_RTC_IRQ_1_CONFIG_REG (MVEBU_RTC_BASE + 0x4)
#define MVEBU_RTC_IRQ_2_CONFIG_REG (MVEBU_RTC_BASE + 0x8)
#define MVEBU_RTC_TIME_REG (MVEBU_RTC_BASE + 0xC)
#define MVEBU_RTC_ALARM_1_REG (MVEBU_RTC_BASE + 0x10)
#define MVEBU_RTC_ALARM_2_REG (MVEBU_RTC_BASE + 0x14)
#define MVEBU_RTC_CCR_REG (MVEBU_RTC_BASE + 0x18)
#define MVEBU_RTC_NOMINAL_TIMING 0x2000
#define MVEBU_RTC_NOMINAL_TIMING_MASK 0x7FFF
#define MVEBU_RTC_TEST_CONFIG_REG (MVEBU_RTC_BASE + 0x1C)
#define MVEBU_RTC_BRIDGE_TIMING_CTRL0_REG (MVEBU_RTC_BASE + 0x80)
#define MVEBU_RTC_WRCLK_PERIOD_MASK 0xFFFF
#define MVEBU_RTC_WRCLK_PERIOD_DEFAULT 0x3FF
#define MVEBU_RTC_WRCLK_SETUP_OFFS 16
#define MVEBU_RTC_WRCLK_SETUP_MASK 0xFFFF0000
#define MVEBU_RTC_WRCLK_SETUP_DEFAULT 0x29
#define MVEBU_RTC_BRIDGE_TIMING_CTRL1_REG (MVEBU_RTC_BASE + 0x84)
#define MVEBU_RTC_READ_OUTPUT_DELAY_MASK 0xFFFF
#define MVEBU_RTC_READ_OUTPUT_DELAY_DEFAULT 0x1F
enum axi_attr {
AXI_ADUNIT_ATTR = 0,
AXI_COMUNIT_ATTR,
AXI_EIP197_ATTR,
AXI_USB3D_ATTR,
AXI_USB3H0_ATTR,
AXI_USB3H1_ATTR,
AXI_SATA0_ATTR,
AXI_SATA1_ATTR,
AXI_DAP_ATTR,
AXI_DFX_ATTR,
AXI_DBG_TRC_ATTR = 12,
AXI_SDIO_ATTR,
AXI_MSS_ATTR,
AXI_MAX_ATTR,
};
/* Most stream IDS are configured centrally in the CP-110 RFU
* but some are configured inside the unit registers
*/
#define RFU_STREAM_ID_BASE (0x450000)
#define USB3H_0_STREAM_ID_REG (RFU_STREAM_ID_BASE + 0xC)
#define USB3H_1_STREAM_ID_REG (RFU_STREAM_ID_BASE + 0x10)
#define SATA_0_STREAM_ID_REG (RFU_STREAM_ID_BASE + 0x14)
#define SATA_1_STREAM_ID_REG (RFU_STREAM_ID_BASE + 0x18)
#define CP_DMA_0_STREAM_ID_REG (0x6B0010)
#define CP_DMA_1_STREAM_ID_REG (0x6D0010)
/* We allocate IDs 128-255 for PCIe */
#define MAX_STREAM_ID (0x80)
uintptr_t stream_id_reg[] = {
USB3H_0_STREAM_ID_REG,
USB3H_1_STREAM_ID_REG,
CP_DMA_0_STREAM_ID_REG,
CP_DMA_1_STREAM_ID_REG,
SATA_0_STREAM_ID_REG,
SATA_1_STREAM_ID_REG,
0
};
static void cp110_errata_wa_init(uintptr_t base)
{
uint32_t data;
/* ERRATA GL-4076863:
* Reset value for global_secure_enable inputs must be changed
* from '1' to '0'.
* When asserted, only "secured" transactions can enter IHB
* configuration space.
* However, blocking AXI transactions is performed by IOB.
* Performing it also at IHB/HB complicates programming model.
*
* Enable non-secure access in SOC configuration register
*/
data = mmio_read_32(base + MVEBU_SOC_CFG_REG(MVEBU_SOC_CFG_REG_NUM));
data &= ~MVEBU_SOC_CFG_GLOG_SECURE_EN_MASK;
mmio_write_32(base + MVEBU_SOC_CFG_REG(MVEBU_SOC_CFG_REG_NUM), data);
}
static void cp110_pcie_clk_cfg(uintptr_t base)
{
uint32_t pcie0_clk, pcie1_clk, reg;
/*
* Determine the pcie0/1 clock direction (input/output) from the
* sample at reset.
*/
reg = mmio_read_32(base + MVEBU_SAMPLE_AT_RESET_REG);
pcie0_clk = (reg & SAR_PCIE0_CLK_CFG_MASK) >> SAR_PCIE0_CLK_CFG_OFFSET;
pcie1_clk = (reg & SAR_PCIE1_CLK_CFG_MASK) >> SAR_PCIE1_CLK_CFG_OFFSET;
/* CP110 revision A2 */
if (cp110_rev_id_get(base) == MVEBU_CP110_REF_ID_A2) {
/*
* PCIe Reference Clock Buffer Control register must be
* set according to the clock direction (input/output)
*/
reg = mmio_read_32(base + MVEBU_PCIE_REF_CLK_BUF_CTRL);
reg &= ~(PCIE0_REFCLK_BUFF_SOURCE | PCIE1_REFCLK_BUFF_SOURCE);
if (!pcie0_clk)
reg |= PCIE0_REFCLK_BUFF_SOURCE;
if (!pcie1_clk)
reg |= PCIE1_REFCLK_BUFF_SOURCE;
mmio_write_32(base + MVEBU_PCIE_REF_CLK_BUF_CTRL, reg);
}
/* CP110 revision A1 */
if (cp110_rev_id_get(base) == MVEBU_CP110_REF_ID_A1) {
if (!pcie0_clk || !pcie1_clk) {
/*
* if one of the pcie clocks is set to input,
* we need to set mss_push[131] field, otherwise,
* the pcie clock might not work.
*/
reg = mmio_read_32(base + MVEBU_CP_MSS_DPSHSR_REG);
reg |= MSS_DPSHSR_REG_PCIE_CLK_SEL;
mmio_write_32(base + MVEBU_CP_MSS_DPSHSR_REG, reg);
}
}
}
/* Set a unique stream id for all DMA capable devices */
static void cp110_stream_id_init(uintptr_t base, uint32_t stream_id)
{
int i = 0;
while (stream_id_reg[i]) {
if (i > MAX_STREAM_ID_PER_CP) {
NOTICE("Only first %d (maximum) Stream IDs allocated\n",
MAX_STREAM_ID_PER_CP);
return;
}
if ((stream_id_reg[i] == CP_DMA_0_STREAM_ID_REG) ||
(stream_id_reg[i] == CP_DMA_1_STREAM_ID_REG))
mmio_write_32(base + stream_id_reg[i],
stream_id << 16 | stream_id);
else
mmio_write_32(base + stream_id_reg[i], stream_id);
/* SATA port 0/1 are in the same SATA unit, and they should use
* the same STREAM ID number
*/
if (stream_id_reg[i] != SATA_0_STREAM_ID_REG)
stream_id++;
i++;
}
}
static void cp110_axi_attr_init(uintptr_t base)
{
uint32_t index, data;
/* Initialize AXI attributes for Armada-7K/8K SoC */
/* Go over the AXI attributes and set Ax-Cache and Ax-Domain */
for (index = 0; index < AXI_MAX_ATTR; index++) {
switch (index) {
/* DFX and MSS unit works with no coherent only -
* there's no option to configure the Ax-Cache and Ax-Domain
*/
case AXI_DFX_ATTR:
case AXI_MSS_ATTR:
continue;
default:
/* Set Ax-Cache as cacheable, no allocate, modifiable,
* bufferable
* The values are different because Read & Write
* definition is different in Ax-Cache
*/
data = mmio_read_32(base + MVEBU_AXI_ATTR_REG(index));
data &= ~MVEBU_AXI_ATTR_ARCACHE_MASK;
data |= (CACHE_ATTR_WRITE_ALLOC |
CACHE_ATTR_CACHEABLE |
CACHE_ATTR_BUFFERABLE) <<
MVEBU_AXI_ATTR_ARCACHE_OFFSET;
data &= ~MVEBU_AXI_ATTR_AWCACHE_MASK;
data |= (CACHE_ATTR_READ_ALLOC |
CACHE_ATTR_CACHEABLE |
CACHE_ATTR_BUFFERABLE) <<
MVEBU_AXI_ATTR_AWCACHE_OFFSET;
/* Set Ax-Domain as Outer domain */
data &= ~MVEBU_AXI_ATTR_ARDOMAIN_MASK;
data |= DOMAIN_OUTER_SHAREABLE <<
MVEBU_AXI_ATTR_ARDOMAIN_OFFSET;
data &= ~MVEBU_AXI_ATTR_AWDOMAIN_MASK;
data |= DOMAIN_OUTER_SHAREABLE <<
MVEBU_AXI_ATTR_AWDOMAIN_OFFSET;
mmio_write_32(base + MVEBU_AXI_ATTR_REG(index), data);
}
}
/* SATA IOCC supported, cache attributes
* for SATA MBUS to AXI configuration.
*/
data = mmio_read_32(base + MVEBU_SATA_M2A_AXI_PORT_CTRL_REG);
data &= ~MVEBU_SATA_M2A_AXI_AWCACHE_MASK;
data |= (CACHE_ATTR_WRITE_ALLOC |
CACHE_ATTR_CACHEABLE |
CACHE_ATTR_BUFFERABLE) <<
MVEBU_SATA_M2A_AXI_AWCACHE_OFFSET;
data &= ~MVEBU_SATA_M2A_AXI_ARCACHE_MASK;
data |= (CACHE_ATTR_READ_ALLOC |
CACHE_ATTR_CACHEABLE |
CACHE_ATTR_BUFFERABLE) <<
MVEBU_SATA_M2A_AXI_ARCACHE_OFFSET;
mmio_write_32(base + MVEBU_SATA_M2A_AXI_PORT_CTRL_REG, data);
/* Set all IO's AXI attribute to non-secure access. */
for (index = 0; index < MVEBU_AXI_PROT_REGS_NUM; index++)
mmio_write_32(base + MVEBU_AXI_PROT_REG(index),
DOMAIN_SYSTEM_SHAREABLE);
}
void cp110_amb_init(uintptr_t base)
{
uint32_t reg;
/* Open AMB bridge Window to Access COMPHY/MDIO registers */
reg = mmio_read_32(base + MVEBU_AMB_IP_BRIDGE_WIN_REG(0));
reg &= ~(MVEBU_AMB_IP_BRIDGE_WIN_SIZE_MASK |
MVEBU_AMB_IP_BRIDGE_WIN_EN_MASK);
reg |= (0x7ff << MVEBU_AMB_IP_BRIDGE_WIN_SIZE_OFFSET) |
(0x1 << MVEBU_AMB_IP_BRIDGE_WIN_EN_OFFSET);
mmio_write_32(base + MVEBU_AMB_IP_BRIDGE_WIN_REG(0), reg);
}
static void cp110_rtc_init(uintptr_t base)
{
/* Update MBus timing parameters before accessing RTC registers */
mmio_clrsetbits_32(base + MVEBU_RTC_BRIDGE_TIMING_CTRL0_REG,
MVEBU_RTC_WRCLK_PERIOD_MASK,
MVEBU_RTC_WRCLK_PERIOD_DEFAULT);
mmio_clrsetbits_32(base + MVEBU_RTC_BRIDGE_TIMING_CTRL0_REG,
MVEBU_RTC_WRCLK_SETUP_MASK,
MVEBU_RTC_WRCLK_SETUP_DEFAULT <<
MVEBU_RTC_WRCLK_SETUP_OFFS);
mmio_clrsetbits_32(base + MVEBU_RTC_BRIDGE_TIMING_CTRL1_REG,
MVEBU_RTC_READ_OUTPUT_DELAY_MASK,
MVEBU_RTC_READ_OUTPUT_DELAY_DEFAULT);
/*
* Issue reset to the RTC if Clock Correction register
* contents did not sustain the reboot/power-on.
*/
if ((mmio_read_32(base + MVEBU_RTC_CCR_REG) &
MVEBU_RTC_NOMINAL_TIMING_MASK) != MVEBU_RTC_NOMINAL_TIMING) {
/* Reset Test register */
mmio_write_32(base + MVEBU_RTC_TEST_CONFIG_REG, 0);
mdelay(500);
/* Reset Status register */
mmio_write_32(base + MVEBU_RTC_STATUS_REG,
(MVEBU_RTC_STATUS_ALARM1_MASK |
MVEBU_RTC_STATUS_ALARM2_MASK));
udelay(62);
/* Turn off Int1 and Int2 sources & clear the Alarm count */
mmio_write_32(base + MVEBU_RTC_IRQ_1_CONFIG_REG, 0);
mmio_write_32(base + MVEBU_RTC_IRQ_2_CONFIG_REG, 0);
mmio_write_32(base + MVEBU_RTC_ALARM_1_REG, 0);
mmio_write_32(base + MVEBU_RTC_ALARM_2_REG, 0);
/* Setup nominal register access timing */
mmio_write_32(base + MVEBU_RTC_CCR_REG,
MVEBU_RTC_NOMINAL_TIMING);
/* Reset Status register */
mmio_write_32(base + MVEBU_RTC_STATUS_REG,
(MVEBU_RTC_STATUS_ALARM1_MASK |
MVEBU_RTC_STATUS_ALARM2_MASK));
udelay(50);
}
}
static void cp110_amb_adec_init(uintptr_t base)
{
/* enable AXI-MBUS by clearing "Bridge Windows Disable" */
mmio_clrbits_32(base + MVEBU_BRIDGE_WIN_DIS_REG,
(1 << MVEBU_BRIDGE_WIN_DIS_OFF));
/* configure AXI-MBUS windows for CP */
init_amb_adec(base);
}
void cp110_init(uintptr_t cp110_base, uint32_t stream_id)
{
INFO("%s: Initialize CPx - base = %lx\n", __func__, cp110_base);
/* configure IOB windows for CP0*/
init_iob(cp110_base);
/* configure AXI-MBUS windows for CP0*/
cp110_amb_adec_init(cp110_base);
/* configure axi for CP0*/
cp110_axi_attr_init(cp110_base);
/* Execute SW WA for erratas */
cp110_errata_wa_init(cp110_base);
/* Confiure pcie clock according to clock direction */
cp110_pcie_clk_cfg(cp110_base);
/* configure stream id for CP0 */
cp110_stream_id_init(cp110_base, stream_id);
/* Open AMB bridge for comphy for CP0 & CP1*/
cp110_amb_init(cp110_base);
/* Reset RTC if needed */
cp110_rtc_init(cp110_base);
}
/* Do the minimal setup required to configure the CP in BLE */
void cp110_ble_init(uintptr_t cp110_base)
{
#if PCI_EP_SUPPORT
INFO("%s: Initialize CPx - base = %lx\n", __func__, cp110_base);
cp110_amb_init(cp110_base);
/* Configure PCIe clock */
cp110_pcie_clk_cfg(cp110_base);
/* Configure PCIe endpoint */
ble_plat_pcie_ep_setup();
#endif
}