| /* |
| * Copyright (c) 2016-2017, ARM Limited and Contributors. All rights reserved. |
| * |
| * SPDX-License-Identifier: BSD-3-Clause |
| */ |
| |
| #include <arch.h> |
| #include <arch_helpers.h> |
| #include <assert.h> |
| #include <cassert.h> |
| #include <platform_def.h> |
| #include <utils.h> |
| #include <xlat_tables.h> |
| #include "../xlat_tables_private.h" |
| |
| /* |
| * Each platform can define the size of the virtual address space, which is |
| * defined in PLAT_VIRT_ADDR_SPACE_SIZE. TTBCR.TxSZ is calculated as 32 minus |
| * the width of said address space. The value of TTBCR.TxSZ must be in the |
| * range 0 to 7 [1], which means that the virtual address space width must be |
| * in the range 32 to 25 bits. |
| * |
| * Here we calculate the initial lookup level from the value of |
| * PLAT_VIRT_ADDR_SPACE_SIZE. For a 4 KB page size, level 1 supports virtual |
| * address spaces of widths 32 to 31 bits, and level 2 from 30 to 25. Wider or |
| * narrower address spaces are not supported. As a result, level 3 cannot be |
| * used as initial lookup level with 4 KB granularity [1]. |
| * |
| * For example, for a 31-bit address space (i.e. PLAT_VIRT_ADDR_SPACE_SIZE == |
| * 1 << 31), TTBCR.TxSZ will be programmed to (32 - 31) = 1. According to Table |
| * G4-5 in the ARM ARM, the initial lookup level for an address space like that |
| * is 1. |
| * |
| * See the ARMv8-A Architecture Reference Manual (DDI 0487A.j) for more |
| * information: |
| * [1] Section G4.6.5 |
| */ |
| |
| #if PLAT_VIRT_ADDR_SPACE_SIZE > (1ULL << (32 - TTBCR_TxSZ_MIN)) |
| |
| # error "PLAT_VIRT_ADDR_SPACE_SIZE is too big." |
| |
| #elif PLAT_VIRT_ADDR_SPACE_SIZE > (1 << L1_XLAT_ADDRESS_SHIFT) |
| |
| # define XLAT_TABLE_LEVEL_BASE 1 |
| # define NUM_BASE_LEVEL_ENTRIES \ |
| (PLAT_VIRT_ADDR_SPACE_SIZE >> L1_XLAT_ADDRESS_SHIFT) |
| |
| #elif PLAT_VIRT_ADDR_SPACE_SIZE >= (1 << (32 - TTBCR_TxSZ_MAX)) |
| |
| # define XLAT_TABLE_LEVEL_BASE 2 |
| # define NUM_BASE_LEVEL_ENTRIES \ |
| (PLAT_VIRT_ADDR_SPACE_SIZE >> L2_XLAT_ADDRESS_SHIFT) |
| |
| #else |
| |
| # error "PLAT_VIRT_ADDR_SPACE_SIZE is too small." |
| |
| #endif |
| |
| static uint64_t base_xlation_table[NUM_BASE_LEVEL_ENTRIES] |
| __aligned(NUM_BASE_LEVEL_ENTRIES * sizeof(uint64_t)); |
| |
| #if ENABLE_ASSERTIONS |
| static unsigned long long get_max_supported_pa(void) |
| { |
| /* Physical address space size for long descriptor format. */ |
| return (1ULL << 40) - 1ULL; |
| } |
| #endif /* ENABLE_ASSERTIONS */ |
| |
| int xlat_arch_current_el(void) |
| { |
| /* |
| * If EL3 is in AArch32 mode, all secure PL1 modes (Monitor, System, |
| * SVC, Abort, UND, IRQ and FIQ modes) execute at EL3. |
| */ |
| return 3; |
| } |
| |
| uint64_t xlat_arch_get_xn_desc(int el __unused) |
| { |
| return UPPER_ATTRS(XN); |
| } |
| |
| void init_xlat_tables(void) |
| { |
| unsigned long long max_pa; |
| uintptr_t max_va; |
| print_mmap(); |
| init_xlation_table(0, base_xlation_table, XLAT_TABLE_LEVEL_BASE, |
| &max_va, &max_pa); |
| |
| assert(max_va <= PLAT_VIRT_ADDR_SPACE_SIZE - 1); |
| assert(max_pa <= PLAT_PHY_ADDR_SPACE_SIZE - 1); |
| assert((PLAT_PHY_ADDR_SPACE_SIZE - 1) <= get_max_supported_pa()); |
| } |
| |
| /******************************************************************************* |
| * Function for enabling the MMU in Secure PL1, assuming that the |
| * page-tables have already been created. |
| ******************************************************************************/ |
| void enable_mmu_secure(unsigned int flags) |
| { |
| unsigned int mair0, ttbcr, sctlr; |
| uint64_t ttbr0; |
| |
| assert(IS_IN_SECURE()); |
| assert((read_sctlr() & SCTLR_M_BIT) == 0); |
| |
| /* Set attributes in the right indices of the MAIR */ |
| mair0 = MAIR0_ATTR_SET(ATTR_DEVICE, ATTR_DEVICE_INDEX); |
| mair0 |= MAIR0_ATTR_SET(ATTR_IWBWA_OWBWA_NTR, |
| ATTR_IWBWA_OWBWA_NTR_INDEX); |
| mair0 |= MAIR0_ATTR_SET(ATTR_NON_CACHEABLE, |
| ATTR_NON_CACHEABLE_INDEX); |
| write_mair0(mair0); |
| |
| /* Invalidate TLBs at the current exception level */ |
| tlbiall(); |
| |
| /* |
| * Set TTBCR bits as well. Set TTBR0 table properties. Disable TTBR1. |
| */ |
| if (flags & XLAT_TABLE_NC) { |
| /* Inner & outer non-cacheable non-shareable. */ |
| ttbcr = TTBCR_EAE_BIT | |
| TTBCR_SH0_NON_SHAREABLE | TTBCR_RGN0_OUTER_NC | |
| TTBCR_RGN0_INNER_NC | |
| (32 - __builtin_ctzl((uintptr_t)PLAT_VIRT_ADDR_SPACE_SIZE)); |
| } else { |
| /* Inner & outer WBWA & shareable. */ |
| ttbcr = TTBCR_EAE_BIT | |
| TTBCR_SH0_INNER_SHAREABLE | TTBCR_RGN0_OUTER_WBA | |
| TTBCR_RGN0_INNER_WBA | |
| (32 - __builtin_ctzl((uintptr_t)PLAT_VIRT_ADDR_SPACE_SIZE)); |
| } |
| ttbcr |= TTBCR_EPD1_BIT; |
| write_ttbcr(ttbcr); |
| |
| /* Set TTBR0 bits as well */ |
| ttbr0 = (uintptr_t) base_xlation_table; |
| write64_ttbr0(ttbr0); |
| write64_ttbr1(0); |
| |
| /* |
| * Ensure all translation table writes have drained |
| * into memory, the TLB invalidation is complete, |
| * and translation register writes are committed |
| * before enabling the MMU |
| */ |
| dsbish(); |
| isb(); |
| |
| sctlr = read_sctlr(); |
| sctlr |= SCTLR_WXN_BIT | SCTLR_M_BIT; |
| |
| if (flags & DISABLE_DCACHE) |
| sctlr &= ~SCTLR_C_BIT; |
| else |
| sctlr |= SCTLR_C_BIT; |
| |
| write_sctlr(sctlr); |
| |
| /* Ensure the MMU enable takes effect immediately */ |
| isb(); |
| } |