blob: 2fa187d6ddd7261ad4a8ccb2a81ff1bdc2238fef [file] [log] [blame]
/*
* Copyright (c) 2023-2024, STMicroelectronics - All Rights Reserved
*
* SPDX-License-Identifier: BSD-3-Clause
*/
#include <cdefs.h>
#include <stdint.h>
#include <common/debug.h>
#include <drivers/clk.h>
#include <lib/fconf/fconf.h>
#include <lib/fconf/fconf_dyn_cfg_getter.h>
#include <lib/mmio.h>
#include <lib/xlat_tables/xlat_tables_v2.h>
#include <plat/common/platform.h>
#include <platform_def.h>
#include <stm32mp_common.h>
#include <stm32mp_dt.h>
#define BOOT_CTX_ADDR 0x0e000020UL
static void print_reset_reason(void)
{
uint32_t rstsr = mmio_read_32(stm32mp_rcc_base() + RCC_C1BOOTRSTSCLRR);
if (rstsr == 0U) {
WARN("Reset reason unknown\n");
return;
}
INFO("Reset reason (0x%x):\n", rstsr);
if ((rstsr & RCC_C1BOOTRSTSCLRR_PADRSTF) == 0U) {
if ((rstsr & RCC_C1BOOTRSTSCLRR_STBYC1RSTF) != 0U) {
INFO("System exits from Standby for CA35\n");
return;
}
if ((rstsr & RCC_C1BOOTRSTSCLRR_D1STBYRSTF) != 0U) {
INFO("D1 domain exits from DStandby\n");
return;
}
}
if ((rstsr & RCC_C1BOOTRSTSCLRR_PORRSTF) != 0U) {
INFO(" Power-on Reset (rst_por)\n");
return;
}
if ((rstsr & RCC_C1BOOTRSTSCLRR_BORRSTF) != 0U) {
INFO(" Brownout Reset (rst_bor)\n");
return;
}
if ((rstsr & RCC_C1BOOTRSTSSETR_SYSC2RSTF) != 0U) {
INFO(" System reset (SYSRST) by M33\n");
return;
}
if ((rstsr & RCC_C1BOOTRSTSSETR_SYSC1RSTF) != 0U) {
INFO(" System reset (SYSRST) by A35\n");
return;
}
if ((rstsr & RCC_C1BOOTRSTSCLRR_HCSSRSTF) != 0U) {
INFO(" Clock failure on HSE\n");
return;
}
if ((rstsr & RCC_C1BOOTRSTSCLRR_IWDG1SYSRSTF) != 0U) {
INFO(" IWDG1 system reset (rst_iwdg1)\n");
return;
}
if ((rstsr & RCC_C1BOOTRSTSCLRR_IWDG2SYSRSTF) != 0U) {
INFO(" IWDG2 system reset (rst_iwdg2)\n");
return;
}
if ((rstsr & RCC_C1BOOTRSTSCLRR_IWDG3SYSRSTF) != 0U) {
INFO(" IWDG3 system reset (rst_iwdg3)\n");
return;
}
if ((rstsr & RCC_C1BOOTRSTSCLRR_IWDG4SYSRSTF) != 0U) {
INFO(" IWDG4 system reset (rst_iwdg4)\n");
return;
}
if ((rstsr & RCC_C1BOOTRSTSCLRR_IWDG5SYSRSTF) != 0U) {
INFO(" IWDG5 system reset (rst_iwdg5)\n");
return;
}
if ((rstsr & RCC_C1BOOTRSTSCLRR_C1P1RSTF) != 0U) {
INFO(" A35 processor core 1 reset\n");
return;
}
if ((rstsr & RCC_C1BOOTRSTSCLRR_PADRSTF) != 0U) {
INFO(" Pad Reset from NRST\n");
return;
}
if ((rstsr & RCC_C1BOOTRSTSCLRR_VCORERSTF) != 0U) {
INFO(" Reset due to a failure of VDD_CORE\n");
return;
}
if ((rstsr & RCC_C1BOOTRSTSCLRR_C1RSTF) != 0U) {
INFO(" A35 processor reset\n");
return;
}
ERROR(" Unidentified reset reason\n");
}
void bl2_el3_early_platform_setup(u_register_t arg0 __unused,
u_register_t arg1 __unused,
u_register_t arg2 __unused,
u_register_t arg3 __unused)
{
stm32mp_save_boot_ctx_address(BOOT_CTX_ADDR);
}
void bl2_platform_setup(void)
{
}
static void reset_backup_domain(void)
{
uintptr_t pwr_base = stm32mp_pwr_base();
uintptr_t rcc_base = stm32mp_rcc_base();
/*
* Disable the backup domain write protection.
* The protection is enable at each reset by hardware
* and must be disabled by software.
*/
mmio_setbits_32(pwr_base + PWR_BDCR1, PWR_BDCR1_DBD3P);
while ((mmio_read_32(pwr_base + PWR_BDCR1) & PWR_BDCR1_DBD3P) == 0U) {
;
}
/* Reset backup domain on cold boot cases */
if ((mmio_read_32(rcc_base + RCC_BDCR) & RCC_BDCR_RTCCKEN) == 0U) {
mmio_setbits_32(rcc_base + RCC_BDCR, RCC_BDCR_VSWRST);
while ((mmio_read_32(rcc_base + RCC_BDCR) & RCC_BDCR_VSWRST) == 0U) {
;
}
mmio_clrbits_32(rcc_base + RCC_BDCR, RCC_BDCR_VSWRST);
}
}
void bl2_el3_plat_arch_setup(void)
{
const char *board_model;
boot_api_context_t *boot_context =
(boot_api_context_t *)stm32mp_get_boot_ctx_address();
if (stm32_otp_probe() != 0U) {
EARLY_ERROR("OTP probe failed\n");
panic();
}
mmap_add_region(BL_CODE_BASE, BL_CODE_BASE,
BL_CODE_END - BL_CODE_BASE,
MT_CODE | MT_SECURE);
configure_mmu();
/* Prevent corruption of preloaded Device Tree */
mmap_add_dynamic_region(DTB_BASE, DTB_BASE,
DTB_LIMIT - DTB_BASE,
MT_RO_DATA | MT_SECURE);
if (dt_open_and_check(STM32MP_DTB_BASE) < 0) {
panic();
}
reset_backup_domain();
if (stm32mp2_clk_init() < 0) {
panic();
}
stm32_save_boot_info(boot_context);
if (stm32mp_uart_console_setup() != 0) {
goto skip_console_init;
}
stm32mp_print_cpuinfo();
board_model = dt_get_board_model();
if (board_model != NULL) {
NOTICE("Model: %s\n", board_model);
}
print_reset_reason();
skip_console_init:
fconf_populate("TB_FW", STM32MP_DTB_BASE);
stm32mp_io_setup();
}