| /* |
| * Copyright (c) 2017-2020, ARM Limited and Contributors. All rights reserved. |
| * |
| * SPDX-License-Identifier: BSD-3-Clause |
| */ |
| |
| #include <services/sdei_flags.h> |
| |
| #define LEVEL 0 |
| #define EDGE 2 |
| #define SDEI_NORMAL 0x70 |
| #define HIGHEST_SEC 0 |
| |
| /memreserve/ 0x80000000 0x00010000; |
| |
| / { |
| }; |
| |
| / { |
| model = "FVP Base"; |
| compatible = "arm,vfp-base", "arm,vexpress"; |
| interrupt-parent = <&gic>; |
| #address-cells = <2>; |
| #size-cells = <2>; |
| |
| chosen { }; |
| |
| aliases { |
| serial0 = &v2m_serial0; |
| serial1 = &v2m_serial1; |
| serial2 = &v2m_serial2; |
| serial3 = &v2m_serial3; |
| }; |
| |
| psci { |
| compatible = "arm,psci-1.0", "arm,psci-0.2", "arm,psci"; |
| method = "smc"; |
| cpu_suspend = <0xc4000001>; |
| cpu_off = <0x84000002>; |
| cpu_on = <0xc4000003>; |
| sys_poweroff = <0x84000008>; |
| sys_reset = <0x84000009>; |
| max-pwr-lvl = <2>; |
| }; |
| |
| #if SDEI_IN_FCONF || SEC_INT_DESC_IN_FCONF |
| firmware { |
| #if SDEI_IN_FCONF |
| sdei { |
| compatible = "arm,sdei-1.0"; |
| method = "smc"; |
| private_event_count = <3>; |
| shared_event_count = <3>; |
| /* |
| * Each event descriptor has typically 3 fields: |
| * 1. Event number |
| * 2. Interrupt number the event is bound to or |
| * if event is dynamic, specified as SDEI_DYN_IRQ |
| * 3. Bit map of event flags |
| */ |
| private_events = <1000 SDEI_DYN_IRQ SDEI_MAPF_DYNAMIC>, |
| <1001 SDEI_DYN_IRQ SDEI_MAPF_DYNAMIC>, |
| <1002 SDEI_DYN_IRQ SDEI_MAPF_DYNAMIC>; |
| shared_events = <2000 SDEI_DYN_IRQ SDEI_MAPF_DYNAMIC>, |
| <2001 SDEI_DYN_IRQ SDEI_MAPF_DYNAMIC>, |
| <2002 SDEI_DYN_IRQ SDEI_MAPF_DYNAMIC>; |
| }; |
| #endif /* SDEI_IN_FCONF */ |
| |
| #if SEC_INT_DESC_IN_FCONF |
| sec_interrupts { |
| compatible = "arm,secure_interrupt_desc"; |
| /* Number of G0 and G1 secure interrupts defined by the platform */ |
| g0_intr_cnt = <2>; |
| g1s_intr_cnt = <9>; |
| /* |
| * Define a list of Group 1 Secure and Group 0 interrupts as per GICv3 |
| * terminology. Each interrupt property descriptor has 3 fields: |
| * 1. Interrupt number |
| * 2. Interrupt priority |
| * 3. Type of interrupt (Edge or Level configured) |
| */ |
| g0_intr_desc = < 8 SDEI_NORMAL EDGE>, |
| <14 HIGHEST_SEC EDGE>; |
| |
| g1s_intr_desc = < 9 HIGHEST_SEC EDGE>, |
| <10 HIGHEST_SEC EDGE>, |
| <11 HIGHEST_SEC EDGE>, |
| <12 HIGHEST_SEC EDGE>, |
| <13 HIGHEST_SEC EDGE>, |
| <15 HIGHEST_SEC EDGE>, |
| <29 HIGHEST_SEC LEVEL>, |
| <56 HIGHEST_SEC LEVEL>, |
| <57 HIGHEST_SEC LEVEL>; |
| }; |
| #endif /* SEC_INT_DESC_IN_FCONF */ |
| }; |
| #endif /* SDEI_IN_FCONF || SEC_INT_DESC_IN_FCONF */ |
| |
| cpus { |
| #address-cells = <2>; |
| #size-cells = <0>; |
| |
| CPU_MAP |
| |
| idle-states { |
| entry-method = "arm,psci"; |
| |
| CPU_SLEEP_0: cpu-sleep-0 { |
| compatible = "arm,idle-state"; |
| local-timer-stop; |
| arm,psci-suspend-param = <0x0010000>; |
| entry-latency-us = <40>; |
| exit-latency-us = <100>; |
| min-residency-us = <150>; |
| }; |
| |
| CLUSTER_SLEEP_0: cluster-sleep-0 { |
| compatible = "arm,idle-state"; |
| local-timer-stop; |
| arm,psci-suspend-param = <0x1010000>; |
| entry-latency-us = <500>; |
| exit-latency-us = <1000>; |
| min-residency-us = <2500>; |
| }; |
| }; |
| |
| CPUS |
| |
| L2_0: l2-cache0 { |
| compatible = "cache"; |
| }; |
| }; |
| |
| memory@80000000 { |
| device_type = "memory"; |
| reg = <0x00000000 0x80000000 0 0x7F000000>, |
| <0x00000008 0x80000000 0 0x80000000>; |
| }; |
| |
| gic: interrupt-controller@2f000000 { |
| compatible = "arm,gic-v3"; |
| #interrupt-cells = <3>; |
| #address-cells = <2>; |
| #size-cells = <2>; |
| ranges; |
| interrupt-controller; |
| reg = <0x0 0x2f000000 0 0x10000>, // GICD |
| <0x0 0x2f100000 0 0x200000>, // GICR |
| <0x0 0x2c000000 0 0x2000>, // GICC |
| <0x0 0x2c010000 0 0x2000>, // GICH |
| <0x0 0x2c02f000 0 0x2000>; // GICV |
| interrupts = <1 9 4>; |
| |
| its: its@2f020000 { |
| compatible = "arm,gic-v3-its"; |
| msi-controller; |
| reg = <0x0 0x2f020000 0x0 0x20000>; // GITS |
| }; |
| }; |
| |
| timer { |
| compatible = "arm,armv8-timer"; |
| interrupts = <1 13 0xff01>, |
| <1 14 0xff01>, |
| <1 11 0xff01>, |
| <1 10 0xff01>; |
| clock-frequency = <100000000>; |
| }; |
| |
| timer@2a810000 { |
| compatible = "arm,armv7-timer-mem"; |
| reg = <0x0 0x2a810000 0x0 0x10000>; |
| clock-frequency = <100000000>; |
| #address-cells = <2>; |
| #size-cells = <2>; |
| ranges; |
| frame@2a830000 { |
| frame-number = <1>; |
| interrupts = <0 26 4>; |
| reg = <0x0 0x2a830000 0x0 0x10000>; |
| }; |
| }; |
| |
| pmu { |
| compatible = "arm,armv8-pmuv3"; |
| interrupts = <0 60 4>, |
| <0 61 4>, |
| <0 62 4>, |
| <0 63 4>; |
| }; |
| |
| smb@0,0 { |
| compatible = "simple-bus"; |
| |
| #address-cells = <2>; |
| #size-cells = <1>; |
| ranges = <0 0 0 0x08000000 0x04000000>, |
| <1 0 0 0x14000000 0x04000000>, |
| <2 0 0 0x18000000 0x04000000>, |
| <3 0 0 0x1c000000 0x04000000>, |
| <4 0 0 0x0c000000 0x04000000>, |
| <5 0 0 0x10000000 0x04000000>; |
| |
| #include "rtsm_ve-motherboard.dtsi" |
| }; |
| |
| panels { |
| panel { |
| compatible = "panel"; |
| mode = "XVGA"; |
| refresh = <60>; |
| xres = <1024>; |
| yres = <768>; |
| pixclock = <15748>; |
| left_margin = <152>; |
| right_margin = <48>; |
| upper_margin = <23>; |
| lower_margin = <3>; |
| hsync_len = <104>; |
| vsync_len = <4>; |
| sync = <0>; |
| vmode = "FB_VMODE_NONINTERLACED"; |
| tim2 = "TIM2_BCD", "TIM2_IPC"; |
| cntl = "CNTL_LCDTFT", "CNTL_BGR", "CNTL_LCDVCOMP(1)"; |
| caps = "CLCD_CAP_5551", "CLCD_CAP_565", "CLCD_CAP_888"; |
| bpp = <16>; |
| }; |
| }; |
| }; |