| /* |
| * Copyright (c) 2020-2024, Arm Limited and Contributors. All rights reserved. |
| * |
| * SPDX-License-Identifier: BSD-3-Clause |
| */ |
| |
| #include <assert.h> |
| #include <errno.h> |
| #include <inttypes.h> |
| #include <stdint.h> |
| #include <string.h> |
| |
| #include <arch_helpers.h> |
| #include <arch/aarch64/arch_features.h> |
| #include <bl31/bl31.h> |
| #include <bl31/interrupt_mgmt.h> |
| #include <common/debug.h> |
| #include <common/runtime_svc.h> |
| #include <common/tbbr/tbbr_img_def.h> |
| #include <lib/el3_runtime/context_mgmt.h> |
| #include <lib/fconf/fconf.h> |
| #include <lib/fconf/fconf_dyn_cfg_getter.h> |
| #include <lib/smccc.h> |
| #include <lib/spinlock.h> |
| #include <lib/utils.h> |
| #include <lib/xlat_tables/xlat_tables_v2.h> |
| #include <plat/common/common_def.h> |
| #include <plat/common/platform.h> |
| #include <platform_def.h> |
| #include <services/el3_spmd_logical_sp.h> |
| #include <services/ffa_svc.h> |
| #include <services/spmc_svc.h> |
| #include <services/spmd_svc.h> |
| #include <smccc_helpers.h> |
| #include "spmd_private.h" |
| |
| /******************************************************************************* |
| * SPM Core context information. |
| ******************************************************************************/ |
| static spmd_spm_core_context_t spm_core_context[PLATFORM_CORE_COUNT]; |
| |
| /******************************************************************************* |
| * SPM Core attribute information is read from its manifest if the SPMC is not |
| * at EL3. Else, it is populated from the SPMC directly. |
| ******************************************************************************/ |
| static spmc_manifest_attribute_t spmc_attrs; |
| |
| /******************************************************************************* |
| * SPM Core entry point information. Discovered on the primary core and reused |
| * on secondary cores. |
| ******************************************************************************/ |
| static entry_point_info_t *spmc_ep_info; |
| |
| /******************************************************************************* |
| * SPM Core context on current CPU get helper. |
| ******************************************************************************/ |
| spmd_spm_core_context_t *spmd_get_context(void) |
| { |
| return &spm_core_context[plat_my_core_pos()]; |
| } |
| |
| /******************************************************************************* |
| * SPM Core ID getter. |
| ******************************************************************************/ |
| uint16_t spmd_spmc_id_get(void) |
| { |
| return spmc_attrs.spmc_id; |
| } |
| |
| /******************************************************************************* |
| * Static function declaration. |
| ******************************************************************************/ |
| static int32_t spmd_init(void); |
| static int spmd_spmc_init(void *pm_addr); |
| |
| static uint64_t spmd_smc_forward(uint32_t smc_fid, |
| bool secure_origin, |
| uint64_t x1, |
| uint64_t x2, |
| uint64_t x3, |
| uint64_t x4, |
| void *cookie, |
| void *handle, |
| uint64_t flags); |
| |
| /****************************************************************************** |
| * Builds an SPMD to SPMC direct message request. |
| *****************************************************************************/ |
| void spmd_build_spmc_message(gp_regs_t *gpregs, uint8_t target_func, |
| unsigned long long message) |
| { |
| write_ctx_reg(gpregs, CTX_GPREG_X0, FFA_MSG_SEND_DIRECT_REQ_SMC32); |
| write_ctx_reg(gpregs, CTX_GPREG_X1, |
| (SPMD_DIRECT_MSG_ENDPOINT_ID << FFA_DIRECT_MSG_SOURCE_SHIFT) | |
| spmd_spmc_id_get()); |
| write_ctx_reg(gpregs, CTX_GPREG_X2, BIT(31) | target_func); |
| write_ctx_reg(gpregs, CTX_GPREG_X3, message); |
| |
| /* Zero out x4-x7 for the direct request emitted towards the SPMC. */ |
| write_ctx_reg(gpregs, CTX_GPREG_X4, 0); |
| write_ctx_reg(gpregs, CTX_GPREG_X5, 0); |
| write_ctx_reg(gpregs, CTX_GPREG_X6, 0); |
| write_ctx_reg(gpregs, CTX_GPREG_X7, 0); |
| } |
| |
| |
| /******************************************************************************* |
| * This function takes an SPMC context pointer and performs a synchronous |
| * SPMC entry. |
| ******************************************************************************/ |
| uint64_t spmd_spm_core_sync_entry(spmd_spm_core_context_t *spmc_ctx) |
| { |
| uint64_t rc; |
| |
| assert(spmc_ctx != NULL); |
| |
| cm_set_context(&(spmc_ctx->cpu_ctx), SECURE); |
| |
| /* Restore the context assigned above */ |
| #if SPMD_SPM_AT_SEL2 |
| cm_el2_sysregs_context_restore(SECURE); |
| #else |
| cm_el1_sysregs_context_restore(SECURE); |
| #endif |
| cm_set_next_eret_context(SECURE); |
| |
| /* Enter SPMC */ |
| rc = spmd_spm_core_enter(&spmc_ctx->c_rt_ctx); |
| |
| /* Save secure state */ |
| #if SPMD_SPM_AT_SEL2 |
| cm_el2_sysregs_context_save(SECURE); |
| #else |
| cm_el1_sysregs_context_save(SECURE); |
| #endif |
| |
| return rc; |
| } |
| |
| /******************************************************************************* |
| * This function returns to the place where spmd_spm_core_sync_entry() was |
| * called originally. |
| ******************************************************************************/ |
| __dead2 void spmd_spm_core_sync_exit(uint64_t rc) |
| { |
| spmd_spm_core_context_t *ctx = spmd_get_context(); |
| |
| /* Get current CPU context from SPMC context */ |
| assert(cm_get_context(SECURE) == &(ctx->cpu_ctx)); |
| |
| /* |
| * The SPMD must have initiated the original request through a |
| * synchronous entry into SPMC. Jump back to the original C runtime |
| * context with the value of rc in x0; |
| */ |
| spmd_spm_core_exit(ctx->c_rt_ctx, rc); |
| |
| panic(); |
| } |
| |
| /******************************************************************************* |
| * Jump to the SPM Core for the first time. |
| ******************************************************************************/ |
| static int32_t spmd_init(void) |
| { |
| spmd_spm_core_context_t *ctx = spmd_get_context(); |
| uint64_t rc; |
| |
| VERBOSE("SPM Core init start.\n"); |
| |
| /* Primary boot core enters the SPMC for initialization. */ |
| ctx->state = SPMC_STATE_ON_PENDING; |
| |
| rc = spmd_spm_core_sync_entry(ctx); |
| if (rc != 0ULL) { |
| ERROR("SPMC initialisation failed 0x%" PRIx64 "\n", rc); |
| return 0; |
| } |
| |
| ctx->state = SPMC_STATE_ON; |
| |
| VERBOSE("SPM Core init end.\n"); |
| |
| spmd_logical_sp_set_spmc_initialized(); |
| rc = spmd_logical_sp_init(); |
| if (rc != 0) { |
| WARN("SPMD Logical partitions failed init.\n"); |
| } |
| |
| return 1; |
| } |
| |
| /******************************************************************************* |
| * spmd_secure_interrupt_handler |
| * Enter the SPMC for further handling of the secure interrupt by the SPMC |
| * itself or a Secure Partition. |
| ******************************************************************************/ |
| static uint64_t spmd_secure_interrupt_handler(uint32_t id, |
| uint32_t flags, |
| void *handle, |
| void *cookie) |
| { |
| spmd_spm_core_context_t *ctx = spmd_get_context(); |
| gp_regs_t *gpregs = get_gpregs_ctx(&ctx->cpu_ctx); |
| int64_t rc; |
| |
| /* Sanity check the security state when the exception was generated */ |
| assert(get_interrupt_src_ss(flags) == NON_SECURE); |
| |
| /* Sanity check the pointer to this cpu's context */ |
| assert(handle == cm_get_context(NON_SECURE)); |
| |
| /* Save the non-secure context before entering SPMC */ |
| #if SPMD_SPM_AT_SEL2 |
| cm_el2_sysregs_context_save(NON_SECURE); |
| #else |
| cm_el1_sysregs_context_save(NON_SECURE); |
| #endif |
| |
| /* Convey the event to the SPMC through the FFA_INTERRUPT interface. */ |
| write_ctx_reg(gpregs, CTX_GPREG_X0, FFA_INTERRUPT); |
| write_ctx_reg(gpregs, CTX_GPREG_X1, 0); |
| write_ctx_reg(gpregs, CTX_GPREG_X2, 0); |
| write_ctx_reg(gpregs, CTX_GPREG_X3, 0); |
| write_ctx_reg(gpregs, CTX_GPREG_X4, 0); |
| write_ctx_reg(gpregs, CTX_GPREG_X5, 0); |
| write_ctx_reg(gpregs, CTX_GPREG_X6, 0); |
| write_ctx_reg(gpregs, CTX_GPREG_X7, 0); |
| |
| /* Mark current core as handling a secure interrupt. */ |
| ctx->secure_interrupt_ongoing = true; |
| |
| rc = spmd_spm_core_sync_entry(ctx); |
| if (rc != 0ULL) { |
| ERROR("%s failed (%" PRId64 ") on CPU%u\n", __func__, rc, plat_my_core_pos()); |
| } |
| |
| ctx->secure_interrupt_ongoing = false; |
| |
| #if SPMD_SPM_AT_SEL2 |
| cm_el2_sysregs_context_restore(NON_SECURE); |
| #else |
| cm_el1_sysregs_context_restore(NON_SECURE); |
| #endif |
| cm_set_next_eret_context(NON_SECURE); |
| |
| SMC_RET0(&ctx->cpu_ctx); |
| } |
| |
| #if (EL3_EXCEPTION_HANDLING == 0) |
| /******************************************************************************* |
| * spmd_group0_interrupt_handler_nwd |
| * Group0 secure interrupt in the normal world are trapped to EL3. Delegate the |
| * handling of the interrupt to the platform handler, and return only upon |
| * successfully handling the Group0 interrupt. |
| ******************************************************************************/ |
| static uint64_t spmd_group0_interrupt_handler_nwd(uint32_t id, |
| uint32_t flags, |
| void *handle, |
| void *cookie) |
| { |
| uint32_t intid; |
| |
| /* Sanity check the security state when the exception was generated. */ |
| assert(get_interrupt_src_ss(flags) == NON_SECURE); |
| |
| /* Sanity check the pointer to this cpu's context. */ |
| assert(handle == cm_get_context(NON_SECURE)); |
| |
| assert(id == INTR_ID_UNAVAILABLE); |
| |
| assert(plat_ic_get_pending_interrupt_type() == INTR_TYPE_EL3); |
| |
| intid = plat_ic_acknowledge_interrupt(); |
| |
| if (plat_spmd_handle_group0_interrupt(intid) < 0) { |
| ERROR("Group0 interrupt %u not handled\n", intid); |
| panic(); |
| } |
| |
| /* Deactivate the corresponding Group0 interrupt. */ |
| plat_ic_end_of_interrupt(intid); |
| |
| return 0U; |
| } |
| #endif |
| |
| /******************************************************************************* |
| * spmd_handle_group0_intr_swd |
| * SPMC delegates handling of Group0 secure interrupt to EL3 firmware using |
| * FFA_EL3_INTR_HANDLE SMC call. Further, SPMD delegates the handling of the |
| * interrupt to the platform handler, and returns only upon successfully |
| * handling the Group0 interrupt. |
| ******************************************************************************/ |
| static uint64_t spmd_handle_group0_intr_swd(void *handle) |
| { |
| uint32_t intid; |
| |
| /* Sanity check the pointer to this cpu's context */ |
| assert(handle == cm_get_context(SECURE)); |
| |
| assert(plat_ic_get_pending_interrupt_type() == INTR_TYPE_EL3); |
| |
| intid = plat_ic_acknowledge_interrupt(); |
| |
| /* |
| * TODO: Currently due to a limitation in SPMD implementation, the |
| * platform handler is expected to not delegate handling to NWd while |
| * processing Group0 secure interrupt. |
| */ |
| if (plat_spmd_handle_group0_interrupt(intid) < 0) { |
| /* Group0 interrupt was not handled by the platform. */ |
| ERROR("Group0 interrupt %u not handled\n", intid); |
| panic(); |
| } |
| |
| /* Deactivate the corresponding Group0 interrupt. */ |
| plat_ic_end_of_interrupt(intid); |
| |
| /* Return success. */ |
| SMC_RET8(handle, FFA_SUCCESS_SMC32, FFA_PARAM_MBZ, FFA_PARAM_MBZ, |
| FFA_PARAM_MBZ, FFA_PARAM_MBZ, FFA_PARAM_MBZ, FFA_PARAM_MBZ, |
| FFA_PARAM_MBZ); |
| } |
| |
| #if ENABLE_RME && SPMD_SPM_AT_SEL2 && !RESET_TO_BL31 |
| static int spmd_dynamic_map_mem(uintptr_t base_addr, size_t size, |
| unsigned int attr, uintptr_t *align_addr, |
| size_t *align_size) |
| { |
| uintptr_t base_addr_align; |
| size_t mapped_size_align; |
| int rc; |
| |
| /* Page aligned address and size if necessary */ |
| base_addr_align = page_align(base_addr, DOWN); |
| mapped_size_align = page_align(size, UP); |
| |
| if ((base_addr != base_addr_align) && |
| (size == mapped_size_align)) { |
| mapped_size_align += PAGE_SIZE; |
| } |
| |
| /* |
| * Map dynamically given region with its aligned base address and |
| * size |
| */ |
| rc = mmap_add_dynamic_region((unsigned long long)base_addr_align, |
| base_addr_align, |
| mapped_size_align, |
| attr); |
| if (rc == 0) { |
| *align_addr = base_addr_align; |
| *align_size = mapped_size_align; |
| } |
| |
| return rc; |
| } |
| |
| static void spmd_do_sec_cpy(uintptr_t root_base_addr, uintptr_t sec_base_addr, |
| size_t size) |
| { |
| uintptr_t root_base_addr_align, sec_base_addr_align; |
| size_t root_mapped_size_align, sec_mapped_size_align; |
| int rc; |
| |
| assert(root_base_addr != 0UL); |
| assert(sec_base_addr != 0UL); |
| assert(size != 0UL); |
| |
| /* Map the memory with required attributes */ |
| rc = spmd_dynamic_map_mem(root_base_addr, size, MT_RO_DATA | MT_ROOT, |
| &root_base_addr_align, |
| &root_mapped_size_align); |
| if (rc != 0) { |
| ERROR("%s %s %lu (%d)\n", "Error while mapping", "root region", |
| root_base_addr, rc); |
| panic(); |
| } |
| |
| rc = spmd_dynamic_map_mem(sec_base_addr, size, MT_RW_DATA | MT_SECURE, |
| &sec_base_addr_align, &sec_mapped_size_align); |
| if (rc != 0) { |
| ERROR("%s %s %lu (%d)\n", "Error while mapping", |
| "secure region", sec_base_addr, rc); |
| panic(); |
| } |
| |
| /* Do copy operation */ |
| (void)memcpy((void *)sec_base_addr, (void *)root_base_addr, size); |
| |
| /* Unmap root memory region */ |
| rc = mmap_remove_dynamic_region(root_base_addr_align, |
| root_mapped_size_align); |
| if (rc != 0) { |
| ERROR("%s %s %lu (%d)\n", "Error while unmapping", |
| "root region", root_base_addr_align, rc); |
| panic(); |
| } |
| |
| /* Unmap secure memory region */ |
| rc = mmap_remove_dynamic_region(sec_base_addr_align, |
| sec_mapped_size_align); |
| if (rc != 0) { |
| ERROR("%s %s %lu (%d)\n", "Error while unmapping", |
| "secure region", sec_base_addr_align, rc); |
| panic(); |
| } |
| } |
| #endif /* ENABLE_RME && SPMD_SPM_AT_SEL2 && !RESET_TO_BL31 */ |
| |
| /******************************************************************************* |
| * Loads SPMC manifest and inits SPMC. |
| ******************************************************************************/ |
| static int spmd_spmc_init(void *pm_addr) |
| { |
| cpu_context_t *cpu_ctx; |
| unsigned int core_id; |
| uint32_t ep_attr, flags; |
| int rc; |
| const struct dyn_cfg_dtb_info_t *image_info __unused; |
| |
| /* Load the SPM Core manifest */ |
| rc = plat_spm_core_manifest_load(&spmc_attrs, pm_addr); |
| if (rc != 0) { |
| WARN("No or invalid SPM Core manifest image provided by BL2\n"); |
| return rc; |
| } |
| |
| /* |
| * Ensure that the SPM Core version is compatible with the SPM |
| * Dispatcher version. |
| */ |
| if ((spmc_attrs.major_version != FFA_VERSION_MAJOR) || |
| (spmc_attrs.minor_version > FFA_VERSION_MINOR)) { |
| WARN("Unsupported FFA version (%u.%u)\n", |
| spmc_attrs.major_version, spmc_attrs.minor_version); |
| return -EINVAL; |
| } |
| |
| VERBOSE("FFA version (%u.%u)\n", spmc_attrs.major_version, |
| spmc_attrs.minor_version); |
| |
| VERBOSE("SPM Core run time EL%x.\n", |
| SPMD_SPM_AT_SEL2 ? MODE_EL2 : MODE_EL1); |
| |
| /* Validate the SPMC ID, Ensure high bit is set */ |
| if (((spmc_attrs.spmc_id >> SPMC_SECURE_ID_SHIFT) & |
| SPMC_SECURE_ID_MASK) == 0U) { |
| WARN("Invalid ID (0x%x) for SPMC.\n", spmc_attrs.spmc_id); |
| return -EINVAL; |
| } |
| |
| /* Validate the SPM Core execution state */ |
| if ((spmc_attrs.exec_state != MODE_RW_64) && |
| (spmc_attrs.exec_state != MODE_RW_32)) { |
| WARN("Unsupported %s%x.\n", "SPM Core execution state 0x", |
| spmc_attrs.exec_state); |
| return -EINVAL; |
| } |
| |
| VERBOSE("%s%x.\n", "SPM Core execution state 0x", |
| spmc_attrs.exec_state); |
| |
| #if SPMD_SPM_AT_SEL2 |
| /* Ensure manifest has not requested AArch32 state in S-EL2 */ |
| if (spmc_attrs.exec_state == MODE_RW_32) { |
| WARN("AArch32 state at S-EL2 is not supported.\n"); |
| return -EINVAL; |
| } |
| |
| /* |
| * Check if S-EL2 is supported on this system if S-EL2 |
| * is required for SPM |
| */ |
| if (!is_feat_sel2_supported()) { |
| WARN("SPM Core run time S-EL2 is not supported.\n"); |
| return -EINVAL; |
| } |
| #endif /* SPMD_SPM_AT_SEL2 */ |
| |
| /* Initialise an entrypoint to set up the CPU context */ |
| ep_attr = SECURE | EP_ST_ENABLE; |
| if ((read_sctlr_el3() & SCTLR_EE_BIT) != 0ULL) { |
| ep_attr |= EP_EE_BIG; |
| } |
| |
| SET_PARAM_HEAD(spmc_ep_info, PARAM_EP, VERSION_1, ep_attr); |
| |
| /* |
| * Populate SPSR for SPM Core based upon validated parameters from the |
| * manifest. |
| */ |
| if (spmc_attrs.exec_state == MODE_RW_32) { |
| spmc_ep_info->spsr = SPSR_MODE32(MODE32_svc, SPSR_T_ARM, |
| SPSR_E_LITTLE, |
| DAIF_FIQ_BIT | |
| DAIF_IRQ_BIT | |
| DAIF_ABT_BIT); |
| } else { |
| |
| #if SPMD_SPM_AT_SEL2 |
| static const uint32_t runtime_el = MODE_EL2; |
| #else |
| static const uint32_t runtime_el = MODE_EL1; |
| #endif |
| spmc_ep_info->spsr = SPSR_64(runtime_el, |
| MODE_SP_ELX, |
| DISABLE_ALL_EXCEPTIONS); |
| } |
| |
| #if ENABLE_RME && SPMD_SPM_AT_SEL2 && !RESET_TO_BL31 |
| image_info = FCONF_GET_PROPERTY(dyn_cfg, dtb, TOS_FW_CONFIG_ID); |
| assert(image_info != NULL); |
| |
| if ((image_info->config_addr == 0UL) || |
| (image_info->secondary_config_addr == 0UL) || |
| (image_info->config_max_size == 0UL)) { |
| return -EINVAL; |
| } |
| |
| /* Copy manifest from root->secure region */ |
| spmd_do_sec_cpy(image_info->config_addr, |
| image_info->secondary_config_addr, |
| image_info->config_max_size); |
| |
| /* Update ep info of BL32 */ |
| assert(spmc_ep_info != NULL); |
| spmc_ep_info->args.arg0 = image_info->secondary_config_addr; |
| #endif /* ENABLE_RME && SPMD_SPM_AT_SEL2 && !RESET_TO_BL31 */ |
| |
| /* Set an initial SPMC context state for all cores. */ |
| for (core_id = 0U; core_id < PLATFORM_CORE_COUNT; core_id++) { |
| spm_core_context[core_id].state = SPMC_STATE_OFF; |
| |
| /* Setup an initial cpu context for the SPMC. */ |
| cpu_ctx = &spm_core_context[core_id].cpu_ctx; |
| cm_setup_context(cpu_ctx, spmc_ep_info); |
| |
| /* |
| * Pass the core linear ID to the SPMC through x4. |
| * (TF-A implementation defined behavior helping |
| * a legacy TOS migration to adopt FF-A). |
| */ |
| write_ctx_reg(get_gpregs_ctx(cpu_ctx), CTX_GPREG_X4, core_id); |
| } |
| |
| /* Register power management hooks with PSCI */ |
| psci_register_spd_pm_hook(&spmd_pm); |
| |
| /* Register init function for deferred init. */ |
| bl31_register_bl32_init(&spmd_init); |
| |
| INFO("SPM Core setup done.\n"); |
| |
| /* |
| * Register an interrupt handler routing secure interrupts to SPMD |
| * while the NWd is running. |
| */ |
| flags = 0; |
| set_interrupt_rm_flag(flags, NON_SECURE); |
| rc = register_interrupt_type_handler(INTR_TYPE_S_EL1, |
| spmd_secure_interrupt_handler, |
| flags); |
| if (rc != 0) { |
| panic(); |
| } |
| |
| /* |
| * Permit configurations where the SPM resides at S-EL1/2 and upon a |
| * Group0 interrupt triggering while the normal world runs, the |
| * interrupt is routed either through the EHF or directly to the SPMD: |
| * |
| * EL3_EXCEPTION_HANDLING=0: the Group0 interrupt is routed to the SPMD |
| * for handling by spmd_group0_interrupt_handler_nwd. |
| * |
| * EL3_EXCEPTION_HANDLING=1: the Group0 interrupt is routed to the EHF. |
| * |
| */ |
| #if (EL3_EXCEPTION_HANDLING == 0) |
| /* |
| * If EL3 interrupts are supported by the platform, register an |
| * interrupt handler routing Group0 interrupts to SPMD while the NWd is |
| * running. |
| */ |
| if (plat_ic_has_interrupt_type(INTR_TYPE_EL3)) { |
| rc = register_interrupt_type_handler(INTR_TYPE_EL3, |
| spmd_group0_interrupt_handler_nwd, |
| flags); |
| if (rc != 0) { |
| panic(); |
| } |
| } |
| #endif |
| |
| return 0; |
| } |
| |
| /******************************************************************************* |
| * Initialize context of SPM Core. |
| ******************************************************************************/ |
| int spmd_setup(void) |
| { |
| int rc; |
| void *spmc_manifest; |
| |
| /* |
| * If the SPMC is at EL3, then just initialise it directly. The |
| * shenanigans of when it is at a lower EL are not needed. |
| */ |
| if (is_spmc_at_el3()) { |
| /* Allow the SPMC to populate its attributes directly. */ |
| spmc_populate_attrs(&spmc_attrs); |
| |
| rc = spmc_setup(); |
| if (rc != 0) { |
| WARN("SPMC initialisation failed 0x%x.\n", rc); |
| } |
| return 0; |
| } |
| |
| spmc_ep_info = bl31_plat_get_next_image_ep_info(SECURE); |
| if (spmc_ep_info == NULL) { |
| WARN("No SPM Core image provided by BL2 boot loader.\n"); |
| return 0; |
| } |
| |
| /* Under no circumstances will this parameter be 0 */ |
| assert(spmc_ep_info->pc != 0ULL); |
| |
| /* |
| * Check if BL32 ep_info has a reference to 'tos_fw_config'. This will |
| * be used as a manifest for the SPM Core at the next lower EL/mode. |
| */ |
| spmc_manifest = (void *)spmc_ep_info->args.arg0; |
| if (spmc_manifest == NULL) { |
| WARN("Invalid or absent SPM Core manifest.\n"); |
| return 0; |
| } |
| |
| /* Load manifest, init SPMC */ |
| rc = spmd_spmc_init(spmc_manifest); |
| if (rc != 0) { |
| WARN("Booting device without SPM initialization.\n"); |
| } |
| |
| return 0; |
| } |
| |
| /******************************************************************************* |
| * Forward FF-A SMCs to the other security state. |
| ******************************************************************************/ |
| uint64_t spmd_smc_switch_state(uint32_t smc_fid, |
| bool secure_origin, |
| uint64_t x1, |
| uint64_t x2, |
| uint64_t x3, |
| uint64_t x4, |
| void *handle, |
| uint64_t flags) |
| { |
| unsigned int secure_state_in = (secure_origin) ? SECURE : NON_SECURE; |
| unsigned int secure_state_out = (!secure_origin) ? SECURE : NON_SECURE; |
| void *ctx_out; |
| |
| #if SPMD_SPM_AT_SEL2 |
| if ((secure_state_out == SECURE) && (is_sve_hint_set(flags) == true)) { |
| /* |
| * Set the SVE hint bit in x0 and pass to the lower secure EL, |
| * if it was set by the caller. |
| */ |
| smc_fid |= (FUNCID_SVE_HINT_MASK << FUNCID_SVE_HINT_SHIFT); |
| } |
| #endif |
| |
| /* Save incoming security state */ |
| #if SPMD_SPM_AT_SEL2 |
| cm_el2_sysregs_context_save(secure_state_in); |
| #else |
| cm_el1_sysregs_context_save(secure_state_in); |
| #endif |
| |
| /* Restore outgoing security state */ |
| #if SPMD_SPM_AT_SEL2 |
| cm_el2_sysregs_context_restore(secure_state_out); |
| #else |
| cm_el1_sysregs_context_restore(secure_state_out); |
| #endif |
| cm_set_next_eret_context(secure_state_out); |
| |
| ctx_out = cm_get_context(secure_state_out); |
| #if SPMD_SPM_AT_SEL2 |
| /* |
| * If SPMC is at SEL2, save additional registers x8-x17, which may |
| * be used in FF-A calls such as FFA_PARTITION_INFO_GET_REGS. |
| * Note that technically, all SPMCs can support this, but this code is |
| * under ifdef to minimize breakage in case other SPMCs do not save |
| * and restore x8-x17. |
| * We also need to pass through these registers since not all FF-A ABIs |
| * modify x8-x17, in which case, SMCCC requires that these registers be |
| * preserved, so the SPMD passes through these registers and expects the |
| * SPMC to save and restore (potentially also modify) them. |
| */ |
| SMC_RET18(ctx_out, smc_fid, x1, x2, x3, x4, |
| SMC_GET_GP(handle, CTX_GPREG_X5), |
| SMC_GET_GP(handle, CTX_GPREG_X6), |
| SMC_GET_GP(handle, CTX_GPREG_X7), |
| SMC_GET_GP(handle, CTX_GPREG_X8), |
| SMC_GET_GP(handle, CTX_GPREG_X9), |
| SMC_GET_GP(handle, CTX_GPREG_X10), |
| SMC_GET_GP(handle, CTX_GPREG_X11), |
| SMC_GET_GP(handle, CTX_GPREG_X12), |
| SMC_GET_GP(handle, CTX_GPREG_X13), |
| SMC_GET_GP(handle, CTX_GPREG_X14), |
| SMC_GET_GP(handle, CTX_GPREG_X15), |
| SMC_GET_GP(handle, CTX_GPREG_X16), |
| SMC_GET_GP(handle, CTX_GPREG_X17) |
| ); |
| |
| #else |
| SMC_RET8(ctx_out, smc_fid, x1, x2, x3, x4, |
| SMC_GET_GP(handle, CTX_GPREG_X5), |
| SMC_GET_GP(handle, CTX_GPREG_X6), |
| SMC_GET_GP(handle, CTX_GPREG_X7)); |
| #endif |
| } |
| |
| /******************************************************************************* |
| * Forward SMCs to the other security state. |
| ******************************************************************************/ |
| static uint64_t spmd_smc_forward(uint32_t smc_fid, |
| bool secure_origin, |
| uint64_t x1, |
| uint64_t x2, |
| uint64_t x3, |
| uint64_t x4, |
| void *cookie, |
| void *handle, |
| uint64_t flags) |
| { |
| if (is_spmc_at_el3() && !secure_origin) { |
| return spmc_smc_handler(smc_fid, secure_origin, x1, x2, x3, x4, |
| cookie, handle, flags); |
| } |
| |
| return spmd_smc_switch_state(smc_fid, secure_origin, x1, x2, x3, x4, |
| handle, flags); |
| |
| } |
| |
| /******************************************************************************* |
| * Return FFA_ERROR with specified error code |
| ******************************************************************************/ |
| uint64_t spmd_ffa_error_return(void *handle, int error_code) |
| { |
| SMC_RET8(handle, (uint32_t) FFA_ERROR, |
| FFA_TARGET_INFO_MBZ, (uint32_t)error_code, |
| FFA_PARAM_MBZ, FFA_PARAM_MBZ, FFA_PARAM_MBZ, |
| FFA_PARAM_MBZ, FFA_PARAM_MBZ); |
| } |
| |
| /******************************************************************************* |
| * spmd_check_address_in_binary_image |
| ******************************************************************************/ |
| bool spmd_check_address_in_binary_image(uint64_t address) |
| { |
| assert(!check_uptr_overflow(spmc_attrs.load_address, spmc_attrs.binary_size)); |
| |
| return ((address >= spmc_attrs.load_address) && |
| (address < (spmc_attrs.load_address + spmc_attrs.binary_size))); |
| } |
| |
| /****************************************************************************** |
| * spmd_is_spmc_message |
| *****************************************************************************/ |
| static bool spmd_is_spmc_message(unsigned int ep) |
| { |
| if (is_spmc_at_el3()) { |
| return false; |
| } |
| |
| return ((ffa_endpoint_destination(ep) == SPMD_DIRECT_MSG_ENDPOINT_ID) |
| && (ffa_endpoint_source(ep) == spmc_attrs.spmc_id)); |
| } |
| |
| /****************************************************************************** |
| * spmd_handle_spmc_message |
| *****************************************************************************/ |
| static int spmd_handle_spmc_message(unsigned long long msg, |
| unsigned long long parm1, unsigned long long parm2, |
| unsigned long long parm3, unsigned long long parm4) |
| { |
| VERBOSE("%s %llx %llx %llx %llx %llx\n", __func__, |
| msg, parm1, parm2, parm3, parm4); |
| |
| return -EINVAL; |
| } |
| |
| /******************************************************************************* |
| * This function forwards FF-A SMCs to either the main SPMD handler or the |
| * SPMC at EL3, depending on the origin security state, if enabled. |
| ******************************************************************************/ |
| uint64_t spmd_ffa_smc_handler(uint32_t smc_fid, |
| uint64_t x1, |
| uint64_t x2, |
| uint64_t x3, |
| uint64_t x4, |
| void *cookie, |
| void *handle, |
| uint64_t flags) |
| { |
| if (is_spmc_at_el3()) { |
| /* |
| * If we have an SPMC at EL3 allow handling of the SMC first. |
| * The SPMC will call back through to SPMD handler if required. |
| */ |
| if (is_caller_secure(flags)) { |
| return spmc_smc_handler(smc_fid, |
| is_caller_secure(flags), |
| x1, x2, x3, x4, cookie, |
| handle, flags); |
| } |
| } |
| return spmd_smc_handler(smc_fid, x1, x2, x3, x4, cookie, |
| handle, flags); |
| } |
| |
| /******************************************************************************* |
| * This function handles all SMCs in the range reserved for FFA. Each call is |
| * either forwarded to the other security state or handled by the SPM dispatcher |
| ******************************************************************************/ |
| uint64_t spmd_smc_handler(uint32_t smc_fid, |
| uint64_t x1, |
| uint64_t x2, |
| uint64_t x3, |
| uint64_t x4, |
| void *cookie, |
| void *handle, |
| uint64_t flags) |
| { |
| spmd_spm_core_context_t *ctx = spmd_get_context(); |
| bool secure_origin; |
| int ret; |
| uint32_t input_version; |
| |
| /* Determine which security state this SMC originated from */ |
| secure_origin = is_caller_secure(flags); |
| |
| VERBOSE("SPM(%u): 0x%x 0x%" PRIx64 " 0x%" PRIx64 " 0x%" PRIx64 " 0x%" PRIx64 |
| " 0x%" PRIx64 " 0x%" PRIx64 " 0x%" PRIx64 "\n", |
| plat_my_core_pos(), smc_fid, x1, x2, x3, x4, |
| SMC_GET_GP(handle, CTX_GPREG_X5), |
| SMC_GET_GP(handle, CTX_GPREG_X6), |
| SMC_GET_GP(handle, CTX_GPREG_X7)); |
| |
| /* |
| * If there is an on-going info regs from EL3 SPMD LP, unconditionally |
| * return, we don't expect any other FF-A ABIs to be called between |
| * calls to FFA_PARTITION_INFO_GET_REGS. |
| */ |
| if (is_spmd_logical_sp_info_regs_req_in_progress(ctx)) { |
| assert(secure_origin); |
| spmd_spm_core_sync_exit(0ULL); |
| } |
| |
| switch (smc_fid) { |
| case FFA_ERROR: |
| /* |
| * Check if this is the first invocation of this interface on |
| * this CPU. If so, then indicate that the SPM Core initialised |
| * unsuccessfully. |
| */ |
| if (secure_origin && (ctx->state == SPMC_STATE_ON_PENDING)) { |
| spmd_spm_core_sync_exit(x2); |
| } |
| |
| /* |
| * If there was an SPMD logical partition direct request on-going, |
| * return back to the SPMD logical partition so the error can be |
| * consumed. |
| */ |
| if (is_spmd_logical_sp_dir_req_in_progress(ctx)) { |
| assert(secure_origin); |
| spmd_spm_core_sync_exit(0ULL); |
| } |
| |
| return spmd_smc_forward(smc_fid, secure_origin, |
| x1, x2, x3, x4, cookie, |
| handle, flags); |
| break; /* not reached */ |
| |
| case FFA_VERSION: |
| input_version = (uint32_t)(0xFFFFFFFF & x1); |
| /* |
| * If caller is secure and SPMC was initialized, |
| * return FFA_VERSION of SPMD. |
| * If caller is non secure and SPMC was initialized, |
| * forward to the EL3 SPMC if enabled, otherwise return |
| * the SPMC version if implemented at a lower EL. |
| * Sanity check to "input_version". |
| * If the EL3 SPMC is enabled, ignore the SPMC state as |
| * this is not used. |
| */ |
| if ((input_version & FFA_VERSION_BIT31_MASK) || |
| (!is_spmc_at_el3() && (ctx->state == SPMC_STATE_RESET))) { |
| ret = FFA_ERROR_NOT_SUPPORTED; |
| } else if (!secure_origin) { |
| if (is_spmc_at_el3()) { |
| /* |
| * Forward the call directly to the EL3 SPMC, if |
| * enabled, as we don't need to wrap the call in |
| * a direct request. |
| */ |
| return spmd_smc_forward(smc_fid, secure_origin, |
| x1, x2, x3, x4, cookie, |
| handle, flags); |
| } |
| |
| gp_regs_t *gpregs = get_gpregs_ctx(&ctx->cpu_ctx); |
| uint64_t rc; |
| |
| if (spmc_attrs.major_version == 1 && |
| spmc_attrs.minor_version == 0) { |
| ret = MAKE_FFA_VERSION(spmc_attrs.major_version, |
| spmc_attrs.minor_version); |
| SMC_RET8(handle, (uint32_t)ret, |
| FFA_TARGET_INFO_MBZ, |
| FFA_TARGET_INFO_MBZ, |
| FFA_PARAM_MBZ, FFA_PARAM_MBZ, |
| FFA_PARAM_MBZ, FFA_PARAM_MBZ, |
| FFA_PARAM_MBZ); |
| break; |
| } |
| /* Save non-secure system registers context */ |
| #if SPMD_SPM_AT_SEL2 |
| cm_el2_sysregs_context_save(NON_SECURE); |
| #else |
| cm_el1_sysregs_context_save(NON_SECURE); |
| #endif |
| |
| /* |
| * The incoming request has FFA_VERSION as X0 smc_fid |
| * and requested version in x1. Prepare a direct request |
| * from SPMD to SPMC with FFA_VERSION framework function |
| * identifier in X2 and requested version in X3. |
| */ |
| spmd_build_spmc_message(gpregs, |
| SPMD_FWK_MSG_FFA_VERSION_REQ, |
| input_version); |
| |
| /* |
| * Ensure x8-x17 NS GP register values are untouched when returning |
| * from the SPMC. |
| */ |
| write_ctx_reg(gpregs, CTX_GPREG_X8, SMC_GET_GP(handle, CTX_GPREG_X8)); |
| write_ctx_reg(gpregs, CTX_GPREG_X9, SMC_GET_GP(handle, CTX_GPREG_X9)); |
| write_ctx_reg(gpregs, CTX_GPREG_X10, SMC_GET_GP(handle, CTX_GPREG_X10)); |
| write_ctx_reg(gpregs, CTX_GPREG_X11, SMC_GET_GP(handle, CTX_GPREG_X11)); |
| write_ctx_reg(gpregs, CTX_GPREG_X12, SMC_GET_GP(handle, CTX_GPREG_X12)); |
| write_ctx_reg(gpregs, CTX_GPREG_X13, SMC_GET_GP(handle, CTX_GPREG_X13)); |
| write_ctx_reg(gpregs, CTX_GPREG_X14, SMC_GET_GP(handle, CTX_GPREG_X14)); |
| write_ctx_reg(gpregs, CTX_GPREG_X15, SMC_GET_GP(handle, CTX_GPREG_X15)); |
| write_ctx_reg(gpregs, CTX_GPREG_X16, SMC_GET_GP(handle, CTX_GPREG_X16)); |
| write_ctx_reg(gpregs, CTX_GPREG_X17, SMC_GET_GP(handle, CTX_GPREG_X17)); |
| |
| rc = spmd_spm_core_sync_entry(ctx); |
| |
| if ((rc != 0ULL) || |
| (SMC_GET_GP(gpregs, CTX_GPREG_X0) != |
| FFA_MSG_SEND_DIRECT_RESP_SMC32) || |
| (SMC_GET_GP(gpregs, CTX_GPREG_X2) != |
| (FFA_FWK_MSG_BIT | |
| SPMD_FWK_MSG_FFA_VERSION_RESP))) { |
| ERROR("Failed to forward FFA_VERSION\n"); |
| ret = FFA_ERROR_NOT_SUPPORTED; |
| } else { |
| ret = SMC_GET_GP(gpregs, CTX_GPREG_X3); |
| } |
| |
| /* |
| * x0-x4 are updated by spmd_smc_forward below. |
| * Zero out x5-x7 in the FFA_VERSION response. |
| */ |
| write_ctx_reg(gpregs, CTX_GPREG_X5, 0); |
| write_ctx_reg(gpregs, CTX_GPREG_X6, 0); |
| write_ctx_reg(gpregs, CTX_GPREG_X7, 0); |
| |
| /* |
| * Return here after SPMC has handled FFA_VERSION. |
| * The returned SPMC version is held in X3. |
| * Forward this version in X0 to the non-secure caller. |
| */ |
| return spmd_smc_forward(ret, true, FFA_PARAM_MBZ, |
| FFA_PARAM_MBZ, FFA_PARAM_MBZ, |
| FFA_PARAM_MBZ, cookie, gpregs, |
| flags); |
| } else { |
| ret = MAKE_FFA_VERSION(FFA_VERSION_MAJOR, |
| FFA_VERSION_MINOR); |
| } |
| |
| SMC_RET8(handle, (uint32_t)ret, FFA_TARGET_INFO_MBZ, |
| FFA_TARGET_INFO_MBZ, FFA_PARAM_MBZ, FFA_PARAM_MBZ, |
| FFA_PARAM_MBZ, FFA_PARAM_MBZ, FFA_PARAM_MBZ); |
| break; /* not reached */ |
| |
| case FFA_FEATURES: |
| /* |
| * This is an optional interface. Do the minimal checks and |
| * forward to SPM Core which will handle it if implemented. |
| */ |
| |
| /* Forward SMC from Normal world to the SPM Core */ |
| if (!secure_origin) { |
| return spmd_smc_forward(smc_fid, secure_origin, |
| x1, x2, x3, x4, cookie, |
| handle, flags); |
| } |
| |
| /* |
| * Return success if call was from secure world i.e. all |
| * FFA functions are supported. This is essentially a |
| * nop. |
| */ |
| SMC_RET8(handle, FFA_SUCCESS_SMC32, x1, x2, x3, x4, |
| SMC_GET_GP(handle, CTX_GPREG_X5), |
| SMC_GET_GP(handle, CTX_GPREG_X6), |
| SMC_GET_GP(handle, CTX_GPREG_X7)); |
| |
| break; /* not reached */ |
| |
| case FFA_ID_GET: |
| /* |
| * Returns the ID of the calling FFA component. |
| */ |
| if (!secure_origin) { |
| SMC_RET8(handle, FFA_SUCCESS_SMC32, |
| FFA_TARGET_INFO_MBZ, FFA_NS_ENDPOINT_ID, |
| FFA_PARAM_MBZ, FFA_PARAM_MBZ, |
| FFA_PARAM_MBZ, FFA_PARAM_MBZ, |
| FFA_PARAM_MBZ); |
| } |
| |
| SMC_RET8(handle, FFA_SUCCESS_SMC32, |
| FFA_TARGET_INFO_MBZ, spmc_attrs.spmc_id, |
| FFA_PARAM_MBZ, FFA_PARAM_MBZ, |
| FFA_PARAM_MBZ, FFA_PARAM_MBZ, |
| FFA_PARAM_MBZ); |
| |
| break; /* not reached */ |
| |
| case FFA_SECONDARY_EP_REGISTER_SMC64: |
| if (secure_origin) { |
| ret = spmd_pm_secondary_ep_register(x1); |
| |
| if (ret < 0) { |
| SMC_RET8(handle, FFA_ERROR_SMC64, |
| FFA_TARGET_INFO_MBZ, ret, |
| FFA_PARAM_MBZ, FFA_PARAM_MBZ, |
| FFA_PARAM_MBZ, FFA_PARAM_MBZ, |
| FFA_PARAM_MBZ); |
| } else { |
| SMC_RET8(handle, FFA_SUCCESS_SMC64, |
| FFA_TARGET_INFO_MBZ, FFA_PARAM_MBZ, |
| FFA_PARAM_MBZ, FFA_PARAM_MBZ, |
| FFA_PARAM_MBZ, FFA_PARAM_MBZ, |
| FFA_PARAM_MBZ); |
| } |
| } |
| |
| return spmd_ffa_error_return(handle, FFA_ERROR_NOT_SUPPORTED); |
| break; /* Not reached */ |
| |
| case FFA_SPM_ID_GET: |
| if (MAKE_FFA_VERSION(1, 1) > FFA_VERSION_COMPILED) { |
| return spmd_ffa_error_return(handle, |
| FFA_ERROR_NOT_SUPPORTED); |
| } |
| /* |
| * Returns the ID of the SPMC or SPMD depending on the FF-A |
| * instance where this function is invoked |
| */ |
| if (!secure_origin) { |
| SMC_RET8(handle, FFA_SUCCESS_SMC32, |
| FFA_TARGET_INFO_MBZ, spmc_attrs.spmc_id, |
| FFA_PARAM_MBZ, FFA_PARAM_MBZ, |
| FFA_PARAM_MBZ, FFA_PARAM_MBZ, |
| FFA_PARAM_MBZ); |
| } |
| SMC_RET8(handle, FFA_SUCCESS_SMC32, |
| FFA_TARGET_INFO_MBZ, SPMD_DIRECT_MSG_ENDPOINT_ID, |
| FFA_PARAM_MBZ, FFA_PARAM_MBZ, |
| FFA_PARAM_MBZ, FFA_PARAM_MBZ, |
| FFA_PARAM_MBZ); |
| |
| break; /* not reached */ |
| |
| case FFA_MSG_SEND_DIRECT_REQ_SMC32: |
| case FFA_MSG_SEND_DIRECT_REQ_SMC64: |
| /* |
| * Regardless of secure_origin, SPMD logical partitions cannot |
| * handle direct messages. They can only initiate direct |
| * messages and consume direct responses or errors. |
| */ |
| if (is_spmd_lp_id(ffa_endpoint_source(x1)) || |
| is_spmd_lp_id(ffa_endpoint_destination(x1))) { |
| return spmd_ffa_error_return(handle, |
| FFA_ERROR_INVALID_PARAMETER |
| ); |
| } |
| |
| /* |
| * When there is an ongoing SPMD logical partition direct |
| * request, there cannot be another direct request. Return |
| * error in this case. Panic'ing is an option but that does |
| * not provide the opportunity for caller to abort based on |
| * error codes. |
| */ |
| if (is_spmd_logical_sp_dir_req_in_progress(ctx)) { |
| assert(secure_origin); |
| return spmd_ffa_error_return(handle, |
| FFA_ERROR_DENIED); |
| } |
| |
| if (!secure_origin) { |
| /* Validate source endpoint is non-secure for non-secure caller. */ |
| if (ffa_is_secure_world_id(ffa_endpoint_source(x1))) { |
| return spmd_ffa_error_return(handle, |
| FFA_ERROR_INVALID_PARAMETER); |
| } |
| } |
| if (secure_origin && spmd_is_spmc_message(x1)) { |
| ret = spmd_handle_spmc_message(x3, x4, |
| SMC_GET_GP(handle, CTX_GPREG_X5), |
| SMC_GET_GP(handle, CTX_GPREG_X6), |
| SMC_GET_GP(handle, CTX_GPREG_X7)); |
| |
| SMC_RET8(handle, FFA_SUCCESS_SMC32, |
| FFA_TARGET_INFO_MBZ, ret, |
| FFA_PARAM_MBZ, FFA_PARAM_MBZ, |
| FFA_PARAM_MBZ, FFA_PARAM_MBZ, |
| FFA_PARAM_MBZ); |
| } else { |
| /* Forward direct message to the other world */ |
| return spmd_smc_forward(smc_fid, secure_origin, |
| x1, x2, x3, x4, cookie, |
| handle, flags); |
| } |
| break; /* Not reached */ |
| |
| case FFA_MSG_SEND_DIRECT_REQ2_SMC64: |
| if (!secure_origin) { |
| /* Validate source endpoint is non-secure for non-secure caller. */ |
| if (ffa_is_secure_world_id(ffa_endpoint_source(x1))) { |
| return spmd_ffa_error_return(handle, |
| FFA_ERROR_INVALID_PARAMETER); |
| } |
| } |
| /* FFA_MSG_SEND_DIRECT_REQ2 not used for framework messages. */ |
| if (secure_origin && spmd_is_spmc_message(x1)) { |
| return spmd_ffa_error_return(handle, FFA_ERROR_INVALID_PARAMETER); |
| } else { |
| /* Forward direct message to the other world */ |
| return spmd_smc_forward(smc_fid, secure_origin, |
| x1, x2, x3, x4, cookie, |
| handle, flags); |
| } |
| break; /* Not reached */ |
| |
| case FFA_MSG_SEND_DIRECT_RESP_SMC32: |
| case FFA_MSG_SEND_DIRECT_RESP_SMC64: |
| if (secure_origin && (spmd_is_spmc_message(x1) || |
| is_spmd_logical_sp_dir_req_in_progress(ctx))) { |
| spmd_spm_core_sync_exit(0ULL); |
| } else { |
| /* Forward direct message to the other world */ |
| return spmd_smc_forward(smc_fid, secure_origin, |
| x1, x2, x3, x4, cookie, |
| handle, flags); |
| } |
| break; /* Not reached */ |
| case FFA_MSG_SEND_DIRECT_RESP2_SMC64: |
| /* Forward direct message to the other world */ |
| return spmd_smc_forward(smc_fid, secure_origin, |
| x1, x2, x3, x4, cookie, |
| handle, flags); |
| break; /* Not reached */ |
| case FFA_RX_RELEASE: |
| case FFA_RXTX_MAP_SMC32: |
| case FFA_RXTX_MAP_SMC64: |
| case FFA_RXTX_UNMAP: |
| case FFA_PARTITION_INFO_GET: |
| #if MAKE_FFA_VERSION(1, 1) <= FFA_VERSION_COMPILED |
| case FFA_NOTIFICATION_BITMAP_CREATE: |
| case FFA_NOTIFICATION_BITMAP_DESTROY: |
| case FFA_NOTIFICATION_BIND: |
| case FFA_NOTIFICATION_UNBIND: |
| case FFA_NOTIFICATION_SET: |
| case FFA_NOTIFICATION_GET: |
| case FFA_NOTIFICATION_INFO_GET: |
| case FFA_NOTIFICATION_INFO_GET_SMC64: |
| case FFA_MSG_SEND2: |
| case FFA_RX_ACQUIRE: |
| #endif |
| case FFA_MSG_RUN: |
| /* |
| * Above calls should be invoked only by the Normal world and |
| * must not be forwarded from Secure world to Normal world. |
| */ |
| if (secure_origin) { |
| return spmd_ffa_error_return(handle, |
| FFA_ERROR_NOT_SUPPORTED); |
| } |
| |
| /* Forward the call to the other world */ |
| /* fallthrough */ |
| case FFA_MSG_SEND: |
| case FFA_MEM_DONATE_SMC32: |
| case FFA_MEM_DONATE_SMC64: |
| case FFA_MEM_LEND_SMC32: |
| case FFA_MEM_LEND_SMC64: |
| case FFA_MEM_SHARE_SMC32: |
| case FFA_MEM_SHARE_SMC64: |
| case FFA_MEM_RETRIEVE_REQ_SMC32: |
| case FFA_MEM_RETRIEVE_REQ_SMC64: |
| case FFA_MEM_RETRIEVE_RESP: |
| case FFA_MEM_RELINQUISH: |
| case FFA_MEM_RECLAIM: |
| case FFA_MEM_FRAG_TX: |
| case FFA_MEM_FRAG_RX: |
| case FFA_SUCCESS_SMC32: |
| case FFA_SUCCESS_SMC64: |
| /* |
| * If there is an ongoing direct request from an SPMD logical |
| * partition, return an error. |
| */ |
| if (is_spmd_logical_sp_dir_req_in_progress(ctx)) { |
| assert(secure_origin); |
| return spmd_ffa_error_return(handle, |
| FFA_ERROR_DENIED); |
| } |
| |
| return spmd_smc_forward(smc_fid, secure_origin, |
| x1, x2, x3, x4, cookie, |
| handle, flags); |
| break; /* not reached */ |
| |
| case FFA_MSG_WAIT: |
| /* |
| * Check if this is the first invocation of this interface on |
| * this CPU from the Secure world. If so, then indicate that the |
| * SPM Core initialised successfully. |
| */ |
| if (secure_origin && (ctx->state == SPMC_STATE_ON_PENDING)) { |
| spmd_spm_core_sync_exit(0ULL); |
| } |
| |
| /* Forward the call to the other world */ |
| /* fallthrough */ |
| case FFA_INTERRUPT: |
| case FFA_MSG_YIELD: |
| /* This interface must be invoked only by the Secure world */ |
| if (!secure_origin) { |
| return spmd_ffa_error_return(handle, |
| FFA_ERROR_NOT_SUPPORTED); |
| } |
| |
| if (is_spmd_logical_sp_dir_req_in_progress(ctx)) { |
| assert(secure_origin); |
| return spmd_ffa_error_return(handle, |
| FFA_ERROR_DENIED); |
| } |
| |
| return spmd_smc_forward(smc_fid, secure_origin, |
| x1, x2, x3, x4, cookie, |
| handle, flags); |
| break; /* not reached */ |
| |
| case FFA_NORMAL_WORLD_RESUME: |
| if (secure_origin && ctx->secure_interrupt_ongoing) { |
| spmd_spm_core_sync_exit(0ULL); |
| } else { |
| return spmd_ffa_error_return(handle, FFA_ERROR_DENIED); |
| } |
| break; /* Not reached */ |
| #if MAKE_FFA_VERSION(1, 1) <= FFA_VERSION_COMPILED |
| case FFA_PARTITION_INFO_GET_REGS_SMC64: |
| if (secure_origin) { |
| return spmd_el3_populate_logical_partition_info(handle, x1, |
| x2, x3); |
| } |
| |
| /* Call only supported with SMCCC 1.2+ */ |
| if (MAKE_SMCCC_VERSION(SMCCC_MAJOR_VERSION, SMCCC_MINOR_VERSION) < 0x10002) { |
| return spmd_ffa_error_return(handle, FFA_ERROR_NOT_SUPPORTED); |
| } |
| |
| return spmd_smc_forward(smc_fid, secure_origin, |
| x1, x2, x3, x4, cookie, |
| handle, flags); |
| break; /* Not reached */ |
| #endif |
| case FFA_CONSOLE_LOG_SMC32: |
| case FFA_CONSOLE_LOG_SMC64: |
| /* This interface must not be forwarded to other worlds. */ |
| return spmd_ffa_error_return(handle, FFA_ERROR_NOT_SUPPORTED); |
| break; /* not reached */ |
| |
| case FFA_EL3_INTR_HANDLE: |
| if (secure_origin) { |
| return spmd_handle_group0_intr_swd(handle); |
| } else { |
| return spmd_ffa_error_return(handle, FFA_ERROR_NOT_SUPPORTED); |
| } |
| default: |
| WARN("SPM: Unsupported call 0x%08x\n", smc_fid); |
| return spmd_ffa_error_return(handle, FFA_ERROR_NOT_SUPPORTED); |
| } |
| } |