blob: dde66aa7d63e1a1d36ada84f33bf42a3e6bfff7e [file] [log] [blame]
/*
* Copyright (c) 2013-2023, ARM Limited and Contributors. All rights reserved.
*
* SPDX-License-Identifier: BSD-3-Clause
*/
#include <platform_def.h>
#include <arch.h>
#include <asm_macros.S>
#include <common/bl_common.h>
#include <cortex_a53.h>
#include <cortex_a72.h>
#include <plat_private.h>
#include <plat_pmu_macros.S>
.globl cpuson_entry_point
.globl cpuson_flags
.globl platform_cpu_warmboot
.globl plat_secondary_cold_boot_setup
.globl plat_report_exception
.globl plat_is_my_cpu_primary
.globl plat_my_core_pos
.globl plat_reset_handler
.globl plat_panic_handler
/*
* void plat_reset_handler(void);
*
* Determine the SOC type and call the appropriate reset
* handler.
*
*/
func plat_reset_handler
mrs x0, midr_el1
ubfx x0, x0, MIDR_PN_SHIFT, #12
cmp w0, #((CORTEX_A72_MIDR >> MIDR_PN_SHIFT) & MIDR_PN_MASK)
b.eq handler_a72
b handler_end
handler_a72:
/*
* This handler does the following:
* Set the L2 Data RAM latency for Cortex-A72.
* Set the L2 Tag RAM latency to for Cortex-A72.
*/
mov x0, #((5 << CORTEX_A72_L2CTLR_DATA_RAM_LATENCY_SHIFT) | \
(0x1 << 5))
msr CORTEX_A72_L2CTLR_EL1, x0
isb
handler_end:
ret
endfunc plat_reset_handler
func plat_my_core_pos
mrs x0, mpidr_el1
and x1, x0, #MPIDR_CPU_MASK
and x0, x0, #MPIDR_CLUSTER_MASK
add x0, x1, x0, LSR #PLAT_RK_CLST_TO_CPUID_SHIFT
ret
endfunc plat_my_core_pos
/* --------------------------------------------------------------------
* void plat_secondary_cold_boot_setup (void);
*
* This function performs any platform specific actions
* needed for a secondary cpu after a cold reset e.g
* mark the cpu's presence, mechanism to place it in a
* holding pen etc.
* --------------------------------------------------------------------
*/
func plat_secondary_cold_boot_setup
/* rk3368 does not do cold boot for secondary CPU */
cb_panic:
b cb_panic
endfunc plat_secondary_cold_boot_setup
func plat_is_my_cpu_primary
mrs x0, mpidr_el1
and x0, x0, #(MPIDR_CLUSTER_MASK | MPIDR_CPU_MASK)
cmp x0, #PLAT_RK_PRIMARY_CPU
cset x0, eq
ret
endfunc plat_is_my_cpu_primary
/* --------------------------------------------------------------------
* void plat_panic_handler(void)
* Call system reset function on panic. Set up an emergency stack so we
* can run C functions (it only needs to last for a few calls until we
* reboot anyway).
* --------------------------------------------------------------------
*/
func plat_panic_handler
msr spsel, #0
bl plat_set_my_stack
b rockchip_soc_soft_reset
endfunc plat_panic_handler
/* --------------------------------------------------------------------
* void platform_cpu_warmboot (void);
* cpus online or resume enterpoint
* --------------------------------------------------------------------
*/
func platform_cpu_warmboot _align=16
mrs x0, MPIDR_EL1
and x19, x0, #MPIDR_CPU_MASK
and x20, x0, #MPIDR_CLUSTER_MASK
mov x0, x20
func_rockchip_clst_warmboot
/* --------------------------------------------------------------------
* big cluster id is 1
* big cores id is from 0-3, little cores id 4-7
* --------------------------------------------------------------------
*/
add x21, x19, x20, lsr #PLAT_RK_CLST_TO_CPUID_SHIFT
/* --------------------------------------------------------------------
* get per cpuup flag
* --------------------------------------------------------------------
*/
adr x4, cpuson_flags
add x4, x4, x21, lsl #2
ldr w1, [x4]
/* --------------------------------------------------------------------
* check cpuon reason
* --------------------------------------------------------------------
*/
cmp w1, PMU_CPU_AUTO_PWRDN
b.eq boot_entry
cmp w1, PMU_CPU_HOTPLUG
b.eq boot_entry
/* --------------------------------------------------------------------
* If the boot core cpuson_flags or cpuson_entry_point is not
* expection. force the core into wfe.
* --------------------------------------------------------------------
*/
wfe_loop:
wfe
b wfe_loop
boot_entry:
str wzr, [x4]
/* --------------------------------------------------------------------
* get per cpuup boot addr
* --------------------------------------------------------------------
*/
adr x5, cpuson_entry_point
ldr x2, [x5, x21, lsl #3]
br x2
endfunc platform_cpu_warmboot
/* --------------------------------------------------------------------
* Per-CPU Secure entry point - resume or power up
* --------------------------------------------------------------------
*/
#if USE_COHERENT_MEM
.section .tzfw_coherent_mem, "a"
#else
.data
#endif
.align 3
cpuson_entry_point:
.rept PLATFORM_CORE_COUNT
.quad 0
.endr
cpuson_flags:
.rept PLATFORM_CORE_COUNT
.word 0
.endr
rockchip_clst_warmboot_data