| /* |
| * Copyright (c) 2019-2020, Xilinx, Inc. All rights reserved. |
| * |
| * SPDX-License-Identifier: BSD-3-Clause |
| */ |
| |
| /* |
| * APU specific definition of processors in the subsystem as well as functions |
| * for getting information about and changing state of the APU. |
| */ |
| |
| #include <assert.h> |
| #include <plat_ipi.h> |
| #include <platform_def.h> |
| #include <versal_def.h> |
| #include <lib/bakery_lock.h> |
| #include <lib/mmio.h> |
| #include <lib/utils.h> |
| #include <drivers/arm/gicv3.h> |
| #include <drivers/arm/gic_common.h> |
| #include <plat/common/platform.h> |
| #include "pm_api_sys.h" |
| #include "pm_client.h" |
| |
| #define UNDEFINED_CPUID (~0) |
| #define IRQ_MAX 142 |
| #define NUM_GICD_ISENABLER ((IRQ_MAX >> 5) + 1) |
| |
| DEFINE_BAKERY_LOCK(pm_client_secure_lock); |
| |
| static const struct pm_ipi apu_ipi = { |
| .local_ipi_id = IPI_ID_APU, |
| .remote_ipi_id = IPI_ID_PMC, |
| .buffer_base = IPI_BUFFER_APU_BASE, |
| }; |
| |
| /* Order in pm_procs_all array must match cpu ids */ |
| static const struct pm_proc pm_procs_all[] = { |
| { |
| .node_id = XPM_DEVID_ACPU_0, |
| .ipi = &apu_ipi, |
| .pwrdn_mask = APU_0_PWRCTL_CPUPWRDWNREQ_MASK, |
| }, |
| { |
| .node_id = XPM_DEVID_ACPU_1, |
| .ipi = &apu_ipi, |
| .pwrdn_mask = APU_1_PWRCTL_CPUPWRDWNREQ_MASK, |
| } |
| }; |
| |
| const struct pm_proc *primary_proc = &pm_procs_all[0]; |
| |
| /* Interrupt to PM node index map */ |
| static enum pm_device_node_idx irq_node_map[IRQ_MAX + 1] = { |
| [13] = XPM_NODEIDX_DEV_GPIO, |
| [14] = XPM_NODEIDX_DEV_I2C_0, |
| [15] = XPM_NODEIDX_DEV_I2C_1, |
| [16] = XPM_NODEIDX_DEV_SPI_0, |
| [17] = XPM_NODEIDX_DEV_SPI_1, |
| [18] = XPM_NODEIDX_DEV_UART_0, |
| [19] = XPM_NODEIDX_DEV_UART_1, |
| [20] = XPM_NODEIDX_DEV_CAN_FD_0, |
| [21] = XPM_NODEIDX_DEV_CAN_FD_1, |
| [22] = XPM_NODEIDX_DEV_USB_0, |
| [23] = XPM_NODEIDX_DEV_USB_0, |
| [24] = XPM_NODEIDX_DEV_USB_0, |
| [25] = XPM_NODEIDX_DEV_USB_0, |
| [26] = XPM_NODEIDX_DEV_USB_0, |
| [37] = XPM_NODEIDX_DEV_TTC_0, |
| [38] = XPM_NODEIDX_DEV_TTC_0, |
| [39] = XPM_NODEIDX_DEV_TTC_0, |
| [40] = XPM_NODEIDX_DEV_TTC_1, |
| [41] = XPM_NODEIDX_DEV_TTC_1, |
| [42] = XPM_NODEIDX_DEV_TTC_1, |
| [43] = XPM_NODEIDX_DEV_TTC_2, |
| [44] = XPM_NODEIDX_DEV_TTC_2, |
| [45] = XPM_NODEIDX_DEV_TTC_2, |
| [46] = XPM_NODEIDX_DEV_TTC_3, |
| [47] = XPM_NODEIDX_DEV_TTC_3, |
| [48] = XPM_NODEIDX_DEV_TTC_3, |
| [56] = XPM_NODEIDX_DEV_GEM_0, |
| [57] = XPM_NODEIDX_DEV_GEM_0, |
| [58] = XPM_NODEIDX_DEV_GEM_1, |
| [59] = XPM_NODEIDX_DEV_GEM_1, |
| [60] = XPM_NODEIDX_DEV_ADMA_0, |
| [61] = XPM_NODEIDX_DEV_ADMA_1, |
| [62] = XPM_NODEIDX_DEV_ADMA_2, |
| [63] = XPM_NODEIDX_DEV_ADMA_3, |
| [64] = XPM_NODEIDX_DEV_ADMA_4, |
| [65] = XPM_NODEIDX_DEV_ADMA_5, |
| [66] = XPM_NODEIDX_DEV_ADMA_6, |
| [67] = XPM_NODEIDX_DEV_ADMA_7, |
| [74] = XPM_NODEIDX_DEV_USB_0, |
| [126] = XPM_NODEIDX_DEV_SDIO_0, |
| [127] = XPM_NODEIDX_DEV_SDIO_0, |
| [128] = XPM_NODEIDX_DEV_SDIO_1, |
| [129] = XPM_NODEIDX_DEV_SDIO_1, |
| [142] = XPM_NODEIDX_DEV_RTC, |
| }; |
| |
| /** |
| * irq_to_pm_node_idx - Get PM node index corresponding to the interrupt number |
| * @irq: Interrupt number |
| * |
| * Return: PM node index corresponding to the specified interrupt |
| */ |
| static enum pm_device_node_idx irq_to_pm_node_idx(unsigned int irq) |
| { |
| assert(irq <= IRQ_MAX); |
| return irq_node_map[irq]; |
| } |
| |
| /** |
| * pm_client_set_wakeup_sources - Set all devices with enabled interrupts as |
| * wake sources in the LibPM. |
| * @node_id: Node id of processor |
| */ |
| static void pm_client_set_wakeup_sources(uint32_t node_id) |
| { |
| uint32_t reg_num; |
| uint32_t device_id; |
| uint8_t pm_wakeup_nodes_set[XPM_NODEIDX_DEV_MAX]; |
| uintptr_t isenabler1 = PLAT_VERSAL_GICD_BASE + GICD_ISENABLER + 4; |
| |
| zeromem(&pm_wakeup_nodes_set, sizeof(pm_wakeup_nodes_set)); |
| |
| for (reg_num = 0; reg_num < NUM_GICD_ISENABLER; reg_num++) { |
| uint32_t base_irq = reg_num << ISENABLER_SHIFT; |
| uint32_t reg = mmio_read_32(isenabler1 + (reg_num << 2)); |
| |
| if (!reg) |
| continue; |
| |
| while (reg) { |
| enum pm_device_node_idx node_idx; |
| uint32_t idx, ret, irq, lowest_set = reg & (-reg); |
| |
| idx = __builtin_ctz(lowest_set); |
| irq = base_irq + idx; |
| |
| if (irq > IRQ_MAX) |
| break; |
| |
| node_idx = irq_to_pm_node_idx(irq); |
| reg &= ~lowest_set; |
| |
| if ((node_idx != XPM_NODEIDX_DEV_MIN) && |
| (!pm_wakeup_nodes_set[node_idx])) { |
| /* Get device ID from node index */ |
| device_id = PERIPH_DEVID(node_idx); |
| ret = pm_set_wakeup_source(node_id, |
| device_id, 1, |
| SECURE_FLAG); |
| pm_wakeup_nodes_set[node_idx] = !ret; |
| } |
| } |
| } |
| } |
| |
| /** |
| * pm_client_suspend() - Client-specific suspend actions |
| * |
| * This function should contain any PU-specific actions |
| * required prior to sending suspend request to PMU |
| * Actions taken depend on the state system is suspending to. |
| */ |
| void pm_client_suspend(const struct pm_proc *proc, unsigned int state) |
| { |
| bakery_lock_get(&pm_client_secure_lock); |
| |
| if (state == PM_STATE_SUSPEND_TO_RAM) |
| pm_client_set_wakeup_sources(proc->node_id); |
| |
| /* Set powerdown request */ |
| mmio_write_32(FPD_APU_PWRCTL, mmio_read_32(FPD_APU_PWRCTL) | |
| proc->pwrdn_mask); |
| |
| bakery_lock_release(&pm_client_secure_lock); |
| } |
| |
| /** |
| * pm_client_abort_suspend() - Client-specific abort-suspend actions |
| * |
| * This function should contain any PU-specific actions |
| * required for aborting a prior suspend request |
| */ |
| void pm_client_abort_suspend(void) |
| { |
| /* Enable interrupts at processor level (for current cpu) */ |
| gicv3_cpuif_enable(plat_my_core_pos()); |
| |
| bakery_lock_get(&pm_client_secure_lock); |
| |
| /* Clear powerdown request */ |
| mmio_write_32(FPD_APU_PWRCTL, mmio_read_32(FPD_APU_PWRCTL) & |
| ~primary_proc->pwrdn_mask); |
| |
| bakery_lock_release(&pm_client_secure_lock); |
| } |
| |
| /** |
| * pm_get_cpuid() - get the local cpu ID for a global node ID |
| * @nid: node id of the processor |
| * |
| * Return: the cpu ID (starting from 0) for the subsystem |
| */ |
| static unsigned int pm_get_cpuid(uint32_t nid) |
| { |
| for (size_t i = 0; i < ARRAY_SIZE(pm_procs_all); i++) { |
| if (pm_procs_all[i].node_id == nid) |
| return i; |
| } |
| return UNDEFINED_CPUID; |
| } |
| |
| /** |
| * pm_client_wakeup() - Client-specific wakeup actions |
| * |
| * This function should contain any PU-specific actions |
| * required for waking up another APU core |
| */ |
| void pm_client_wakeup(const struct pm_proc *proc) |
| { |
| unsigned int cpuid = pm_get_cpuid(proc->node_id); |
| |
| if (cpuid == UNDEFINED_CPUID) |
| return; |
| |
| bakery_lock_get(&pm_client_secure_lock); |
| |
| /* clear powerdown bit for affected cpu */ |
| uint32_t val = mmio_read_32(FPD_APU_PWRCTL); |
| val &= ~(proc->pwrdn_mask); |
| mmio_write_32(FPD_APU_PWRCTL, val); |
| |
| bakery_lock_release(&pm_client_secure_lock); |
| } |
| |
| /** |
| * pm_get_proc() - returns pointer to the proc structure |
| * @cpuid: id of the cpu whose proc struct pointer should be returned |
| * |
| * Return: pointer to a proc structure if proc is found, otherwise NULL |
| */ |
| const struct pm_proc *pm_get_proc(unsigned int cpuid) |
| { |
| if (cpuid < ARRAY_SIZE(pm_procs_all)) |
| return &pm_procs_all[cpuid]; |
| |
| return NULL; |
| } |