| /* |
| * Copyright (c) 2016, ARM Limited and Contributors. All rights reserved. |
| * |
| * Redistribution and use in source and binary forms, with or without |
| * modification, are permitted provided that the following conditions are met: |
| * |
| * Redistributions of source code must retain the above copyright notice, this |
| * list of conditions and the following disclaimer. |
| * |
| * Redistributions in binary form must reproduce the above copyright notice, |
| * this list of conditions and the following disclaimer in the documentation |
| * and/or other materials provided with the distribution. |
| * |
| * Neither the name of ARM nor the names of its contributors may be used |
| * to endorse or promote products derived from this software without specific |
| * prior written permission. |
| * |
| * THIS SOFTWARE IS PROVIDED BY THE COPYRIGHT HOLDERS AND CONTRIBUTORS "AS IS" |
| * AND ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE |
| * IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE |
| * ARE DISCLAIMED. IN NO EVENT SHALL THE COPYRIGHT HOLDER OR CONTRIBUTORS BE |
| * LIABLE FOR ANY DIRECT, INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY, OR |
| * CONSEQUENTIAL DAMAGES (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF |
| * SUBSTITUTE GOODS OR SERVICES; LOSS OF USE, DATA, OR PROFITS; OR BUSINESS |
| * INTERRUPTION) HOWEVER CAUSED AND ON ANY THEORY OF LIABILITY, WHETHER IN |
| * CONTRACT, STRICT LIABILITY, OR TORT (INCLUDING NEGLIGENCE OR OTHERWISE) |
| * ARISING IN ANY WAY OUT OF THE USE OF THIS SOFTWARE, EVEN IF ADVISED OF THE |
| * POSSIBILITY OF SUCH DAMAGE. |
| */ |
| |
| #include <arch.h> |
| #include <asm_macros.S> |
| #include <bl_common.h> |
| |
| |
| .globl bl2_vector_table |
| .globl bl2_entrypoint |
| |
| |
| vector_base bl2_vector_table |
| b bl2_entrypoint |
| b report_exception /* Undef */ |
| b report_exception /* SVC call */ |
| b report_exception /* Prefetch abort */ |
| b report_exception /* Data abort */ |
| b report_exception /* Reserved */ |
| b report_exception /* IRQ */ |
| b report_exception /* FIQ */ |
| |
| |
| func bl2_entrypoint |
| /*--------------------------------------------- |
| * Save from r1 the extents of the trusted ram |
| * available to BL2 for future use. |
| * r0 is not currently used. |
| * --------------------------------------------- |
| */ |
| mov r11, r1 |
| |
| /* --------------------------------------------- |
| * Set the exception vector to something sane. |
| * --------------------------------------------- |
| */ |
| ldr r0, =bl2_vector_table |
| stcopr r0, VBAR |
| isb |
| |
| /* ----------------------------------------------------- |
| * Enable the instruction cache |
| * ----------------------------------------------------- |
| */ |
| ldcopr r0, SCTLR |
| orr r0, r0, #SCTLR_I_BIT |
| stcopr r0, SCTLR |
| isb |
| |
| /* --------------------------------------------- |
| * Since BL2 executes after BL1, it is assumed |
| * here that BL1 has already has done the |
| * necessary register initializations. |
| * --------------------------------------------- |
| */ |
| |
| /* --------------------------------------------- |
| * Invalidate the RW memory used by the BL2 |
| * image. This includes the data and NOBITS |
| * sections. This is done to safeguard against |
| * possible corruption of this memory by dirty |
| * cache lines in a system cache as a result of |
| * use by an earlier boot loader stage. |
| * --------------------------------------------- |
| */ |
| ldr r0, =__RW_START__ |
| ldr r1, =__RW_END__ |
| sub r1, r1, r0 |
| bl inv_dcache_range |
| |
| /* --------------------------------------------- |
| * Zero out NOBITS sections. There are 2 of them: |
| * - the .bss section; |
| * - the coherent memory section. |
| * --------------------------------------------- |
| */ |
| ldr r0, =__BSS_START__ |
| ldr r1, =__BSS_SIZE__ |
| bl zeromem |
| |
| #if USE_COHERENT_MEM |
| ldr r0, =__COHERENT_RAM_START__ |
| ldr r1, =__COHERENT_RAM_UNALIGNED_SIZE__ |
| bl zeromem |
| #endif |
| |
| /* -------------------------------------------- |
| * Allocate a stack whose memory will be marked |
| * as Normal-IS-WBWA when the MMU is enabled. |
| * There is no risk of reading stale stack |
| * memory after enabling the MMU as only the |
| * primary cpu is running at the moment. |
| * -------------------------------------------- |
| */ |
| bl plat_set_my_stack |
| |
| /* --------------------------------------------- |
| * Perform early platform setup & platform |
| * specific early arch. setup e.g. mmu setup |
| * --------------------------------------------- |
| */ |
| mov r0, r11 |
| bl bl2_early_platform_setup |
| bl bl2_plat_arch_setup |
| |
| /* --------------------------------------------- |
| * Jump to main function. |
| * --------------------------------------------- |
| */ |
| bl bl2_main |
| |
| /* --------------------------------------------- |
| * Should never reach this point. |
| * --------------------------------------------- |
| */ |
| bl plat_panic_handler |
| |
| endfunc bl2_entrypoint |