| /* |
| * Copyright (c) 2013-2018, ARM Limited and Contributors. All rights reserved. |
| * |
| * SPDX-License-Identifier: BSD-3-Clause |
| */ |
| |
| #include <arch.h> |
| #include <arch_helpers.h> |
| #include <arm_arch_svc.h> |
| #include <assert.h> |
| #include <debug.h> |
| #include <platform.h> |
| #include <pmf.h> |
| #include <runtime_instr.h> |
| #include <smccc.h> |
| #include <string.h> |
| #include "psci_private.h" |
| |
| /******************************************************************************* |
| * PSCI frontend api for servicing SMCs. Described in the PSCI spec. |
| ******************************************************************************/ |
| int psci_cpu_on(u_register_t target_cpu, |
| uintptr_t entrypoint, |
| u_register_t context_id) |
| |
| { |
| int rc; |
| entry_point_info_t ep; |
| |
| /* Determine if the cpu exists of not */ |
| rc = psci_validate_mpidr(target_cpu); |
| if (rc != PSCI_E_SUCCESS) |
| return PSCI_E_INVALID_PARAMS; |
| |
| /* Validate the entry point and get the entry_point_info */ |
| rc = psci_validate_entry_point(&ep, entrypoint, context_id); |
| if (rc != PSCI_E_SUCCESS) |
| return rc; |
| |
| /* |
| * To turn this cpu on, specify which power |
| * levels need to be turned on |
| */ |
| return psci_cpu_on_start(target_cpu, &ep); |
| } |
| |
| unsigned int psci_version(void) |
| { |
| return PSCI_MAJOR_VER | PSCI_MINOR_VER; |
| } |
| |
| int psci_cpu_suspend(unsigned int power_state, |
| uintptr_t entrypoint, |
| u_register_t context_id) |
| { |
| int rc; |
| unsigned int target_pwrlvl, is_power_down_state; |
| entry_point_info_t ep; |
| psci_power_state_t state_info = { {PSCI_LOCAL_STATE_RUN} }; |
| plat_local_state_t cpu_pd_state; |
| |
| /* Validate the power_state parameter */ |
| rc = psci_validate_power_state(power_state, &state_info); |
| if (rc != PSCI_E_SUCCESS) { |
| assert(rc == PSCI_E_INVALID_PARAMS); |
| return rc; |
| } |
| |
| /* |
| * Get the value of the state type bit from the power state parameter. |
| */ |
| is_power_down_state = psci_get_pstate_type(power_state); |
| |
| /* Sanity check the requested suspend levels */ |
| assert(psci_validate_suspend_req(&state_info, is_power_down_state) |
| == PSCI_E_SUCCESS); |
| |
| target_pwrlvl = psci_find_target_suspend_lvl(&state_info); |
| if (target_pwrlvl == PSCI_INVALID_PWR_LVL) { |
| ERROR("Invalid target power level for suspend operation\n"); |
| panic(); |
| } |
| |
| /* Fast path for CPU standby.*/ |
| if (is_cpu_standby_req(is_power_down_state, target_pwrlvl)) { |
| if (!psci_plat_pm_ops->cpu_standby) |
| return PSCI_E_INVALID_PARAMS; |
| |
| /* |
| * Set the state of the CPU power domain to the platform |
| * specific retention state and enter the standby state. |
| */ |
| cpu_pd_state = state_info.pwr_domain_state[PSCI_CPU_PWR_LVL]; |
| psci_set_cpu_local_state(cpu_pd_state); |
| |
| #if ENABLE_PSCI_STAT |
| plat_psci_stat_accounting_start(&state_info); |
| #endif |
| |
| #if ENABLE_RUNTIME_INSTRUMENTATION |
| PMF_CAPTURE_TIMESTAMP(rt_instr_svc, |
| RT_INSTR_ENTER_HW_LOW_PWR, |
| PMF_NO_CACHE_MAINT); |
| #endif |
| |
| psci_plat_pm_ops->cpu_standby(cpu_pd_state); |
| |
| /* Upon exit from standby, set the state back to RUN. */ |
| psci_set_cpu_local_state(PSCI_LOCAL_STATE_RUN); |
| |
| #if ENABLE_RUNTIME_INSTRUMENTATION |
| PMF_CAPTURE_TIMESTAMP(rt_instr_svc, |
| RT_INSTR_EXIT_HW_LOW_PWR, |
| PMF_NO_CACHE_MAINT); |
| #endif |
| |
| #if ENABLE_PSCI_STAT |
| plat_psci_stat_accounting_stop(&state_info); |
| |
| /* Update PSCI stats */ |
| psci_stats_update_pwr_up(PSCI_CPU_PWR_LVL, &state_info); |
| #endif |
| |
| return PSCI_E_SUCCESS; |
| } |
| |
| /* |
| * If a power down state has been requested, we need to verify entry |
| * point and program entry information. |
| */ |
| if (is_power_down_state) { |
| rc = psci_validate_entry_point(&ep, entrypoint, context_id); |
| if (rc != PSCI_E_SUCCESS) |
| return rc; |
| } |
| |
| /* |
| * Do what is needed to enter the power down state. Upon success, |
| * enter the final wfi which will power down this CPU. This function |
| * might return if the power down was abandoned for any reason, e.g. |
| * arrival of an interrupt |
| */ |
| psci_cpu_suspend_start(&ep, |
| target_pwrlvl, |
| &state_info, |
| is_power_down_state); |
| |
| return PSCI_E_SUCCESS; |
| } |
| |
| |
| int psci_system_suspend(uintptr_t entrypoint, u_register_t context_id) |
| { |
| int rc; |
| psci_power_state_t state_info; |
| entry_point_info_t ep; |
| |
| /* Check if the current CPU is the last ON CPU in the system */ |
| if (!psci_is_last_on_cpu()) |
| return PSCI_E_DENIED; |
| |
| /* Validate the entry point and get the entry_point_info */ |
| rc = psci_validate_entry_point(&ep, entrypoint, context_id); |
| if (rc != PSCI_E_SUCCESS) |
| return rc; |
| |
| /* Query the psci_power_state for system suspend */ |
| psci_query_sys_suspend_pwrstate(&state_info); |
| |
| /* Ensure that the psci_power_state makes sense */ |
| assert(psci_find_target_suspend_lvl(&state_info) == PLAT_MAX_PWR_LVL); |
| assert(psci_validate_suspend_req(&state_info, PSTATE_TYPE_POWERDOWN) |
| == PSCI_E_SUCCESS); |
| assert(is_local_state_off(state_info.pwr_domain_state[PLAT_MAX_PWR_LVL])); |
| |
| /* |
| * Do what is needed to enter the system suspend state. This function |
| * might return if the power down was abandoned for any reason, e.g. |
| * arrival of an interrupt |
| */ |
| psci_cpu_suspend_start(&ep, |
| PLAT_MAX_PWR_LVL, |
| &state_info, |
| PSTATE_TYPE_POWERDOWN); |
| |
| return PSCI_E_SUCCESS; |
| } |
| |
| int psci_cpu_off(void) |
| { |
| int rc; |
| unsigned int target_pwrlvl = PLAT_MAX_PWR_LVL; |
| |
| /* |
| * Do what is needed to power off this CPU and possible higher power |
| * levels if it able to do so. Upon success, enter the final wfi |
| * which will power down this CPU. |
| */ |
| rc = psci_do_cpu_off(target_pwrlvl); |
| |
| /* |
| * The only error cpu_off can return is E_DENIED. So check if that's |
| * indeed the case. |
| */ |
| assert(rc == PSCI_E_DENIED); |
| |
| return rc; |
| } |
| |
| int psci_affinity_info(u_register_t target_affinity, |
| unsigned int lowest_affinity_level) |
| { |
| int target_idx; |
| |
| /* We dont support level higher than PSCI_CPU_PWR_LVL */ |
| if (lowest_affinity_level > PSCI_CPU_PWR_LVL) |
| return PSCI_E_INVALID_PARAMS; |
| |
| /* Calculate the cpu index of the target */ |
| target_idx = plat_core_pos_by_mpidr(target_affinity); |
| if (target_idx == -1) |
| return PSCI_E_INVALID_PARAMS; |
| |
| /* |
| * Generic management: |
| * Perform cache maintanence ahead of reading the target CPU state to |
| * ensure that the data is not stale. |
| * There is a theoretical edge case where the cache may contain stale |
| * data for the target CPU data - this can occur under the following |
| * conditions: |
| * - the target CPU is in another cluster from the current |
| * - the target CPU was the last CPU to shutdown on its cluster |
| * - the cluster was removed from coherency as part of the CPU shutdown |
| * |
| * In this case the cache maintenace that was performed as part of the |
| * target CPUs shutdown was not seen by the current CPU's cluster. And |
| * so the cache may contain stale data for the target CPU. |
| */ |
| flush_cpu_data_by_index(target_idx, psci_svc_cpu_data.aff_info_state); |
| |
| return psci_get_aff_info_state_by_idx(target_idx); |
| } |
| |
| int psci_migrate(u_register_t target_cpu) |
| { |
| int rc; |
| u_register_t resident_cpu_mpidr; |
| |
| rc = psci_spd_migrate_info(&resident_cpu_mpidr); |
| if (rc != PSCI_TOS_UP_MIG_CAP) |
| return (rc == PSCI_TOS_NOT_UP_MIG_CAP) ? |
| PSCI_E_DENIED : PSCI_E_NOT_SUPPORTED; |
| |
| /* |
| * Migrate should only be invoked on the CPU where |
| * the Secure OS is resident. |
| */ |
| if (resident_cpu_mpidr != read_mpidr_el1()) |
| return PSCI_E_NOT_PRESENT; |
| |
| /* Check the validity of the specified target cpu */ |
| rc = psci_validate_mpidr(target_cpu); |
| if (rc != PSCI_E_SUCCESS) |
| return PSCI_E_INVALID_PARAMS; |
| |
| assert(psci_spd_pm && psci_spd_pm->svc_migrate); |
| |
| rc = psci_spd_pm->svc_migrate(read_mpidr_el1(), target_cpu); |
| assert(rc == PSCI_E_SUCCESS || rc == PSCI_E_INTERN_FAIL); |
| |
| return rc; |
| } |
| |
| int psci_migrate_info_type(void) |
| { |
| u_register_t resident_cpu_mpidr; |
| |
| return psci_spd_migrate_info(&resident_cpu_mpidr); |
| } |
| |
| long psci_migrate_info_up_cpu(void) |
| { |
| u_register_t resident_cpu_mpidr; |
| int rc; |
| |
| /* |
| * Return value of this depends upon what |
| * psci_spd_migrate_info() returns. |
| */ |
| rc = psci_spd_migrate_info(&resident_cpu_mpidr); |
| if (rc != PSCI_TOS_NOT_UP_MIG_CAP && rc != PSCI_TOS_UP_MIG_CAP) |
| return PSCI_E_INVALID_PARAMS; |
| |
| return resident_cpu_mpidr; |
| } |
| |
| int psci_node_hw_state(u_register_t target_cpu, |
| unsigned int power_level) |
| { |
| int rc; |
| |
| /* Validate target_cpu */ |
| rc = psci_validate_mpidr(target_cpu); |
| if (rc != PSCI_E_SUCCESS) |
| return PSCI_E_INVALID_PARAMS; |
| |
| /* Validate power_level against PLAT_MAX_PWR_LVL */ |
| if (power_level > PLAT_MAX_PWR_LVL) |
| return PSCI_E_INVALID_PARAMS; |
| |
| /* |
| * Dispatch this call to platform to query power controller, and pass on |
| * to the caller what it returns |
| */ |
| assert(psci_plat_pm_ops->get_node_hw_state); |
| rc = psci_plat_pm_ops->get_node_hw_state(target_cpu, power_level); |
| assert((rc >= HW_ON && rc <= HW_STANDBY) || rc == PSCI_E_NOT_SUPPORTED |
| || rc == PSCI_E_INVALID_PARAMS); |
| return rc; |
| } |
| |
| int psci_features(unsigned int psci_fid) |
| { |
| unsigned int local_caps = psci_caps; |
| |
| if (psci_fid == SMCCC_VERSION) |
| return PSCI_E_SUCCESS; |
| |
| /* Check if it is a 64 bit function */ |
| if (((psci_fid >> FUNCID_CC_SHIFT) & FUNCID_CC_MASK) == SMC_64) |
| local_caps &= PSCI_CAP_64BIT_MASK; |
| |
| /* Check for invalid fid */ |
| if (!(is_std_svc_call(psci_fid) && is_valid_fast_smc(psci_fid) |
| && is_psci_fid(psci_fid))) |
| return PSCI_E_NOT_SUPPORTED; |
| |
| |
| /* Check if the psci fid is supported or not */ |
| if (!(local_caps & define_psci_cap(psci_fid))) |
| return PSCI_E_NOT_SUPPORTED; |
| |
| /* Format the feature flags */ |
| if (psci_fid == PSCI_CPU_SUSPEND_AARCH32 || |
| psci_fid == PSCI_CPU_SUSPEND_AARCH64) { |
| /* |
| * The trusted firmware does not support OS Initiated Mode. |
| */ |
| return (FF_PSTATE << FF_PSTATE_SHIFT) | |
| ((!FF_SUPPORTS_OS_INIT_MODE) << FF_MODE_SUPPORT_SHIFT); |
| } |
| |
| /* Return 0 for all other fid's */ |
| return PSCI_E_SUCCESS; |
| } |
| |
| /******************************************************************************* |
| * PSCI top level handler for servicing SMCs. |
| ******************************************************************************/ |
| u_register_t psci_smc_handler(uint32_t smc_fid, |
| u_register_t x1, |
| u_register_t x2, |
| u_register_t x3, |
| u_register_t x4, |
| void *cookie, |
| void *handle, |
| u_register_t flags) |
| { |
| if (is_caller_secure(flags)) |
| return SMC_UNK; |
| |
| /* Check the fid against the capabilities */ |
| if (!(psci_caps & define_psci_cap(smc_fid))) |
| return SMC_UNK; |
| |
| if (((smc_fid >> FUNCID_CC_SHIFT) & FUNCID_CC_MASK) == SMC_32) { |
| /* 32-bit PSCI function, clear top parameter bits */ |
| |
| x1 = (uint32_t)x1; |
| x2 = (uint32_t)x2; |
| x3 = (uint32_t)x3; |
| |
| switch (smc_fid) { |
| case PSCI_VERSION: |
| return psci_version(); |
| |
| case PSCI_CPU_OFF: |
| return psci_cpu_off(); |
| |
| case PSCI_CPU_SUSPEND_AARCH32: |
| return psci_cpu_suspend(x1, x2, x3); |
| |
| case PSCI_CPU_ON_AARCH32: |
| return psci_cpu_on(x1, x2, x3); |
| |
| case PSCI_AFFINITY_INFO_AARCH32: |
| return psci_affinity_info(x1, x2); |
| |
| case PSCI_MIG_AARCH32: |
| return psci_migrate(x1); |
| |
| case PSCI_MIG_INFO_TYPE: |
| return psci_migrate_info_type(); |
| |
| case PSCI_MIG_INFO_UP_CPU_AARCH32: |
| return psci_migrate_info_up_cpu(); |
| |
| case PSCI_NODE_HW_STATE_AARCH32: |
| return psci_node_hw_state(x1, x2); |
| |
| case PSCI_SYSTEM_SUSPEND_AARCH32: |
| return psci_system_suspend(x1, x2); |
| |
| case PSCI_SYSTEM_OFF: |
| psci_system_off(); |
| /* We should never return from psci_system_off() */ |
| |
| case PSCI_SYSTEM_RESET: |
| psci_system_reset(); |
| /* We should never return from psci_system_reset() */ |
| |
| case PSCI_FEATURES: |
| return psci_features(x1); |
| |
| #if ENABLE_PSCI_STAT |
| case PSCI_STAT_RESIDENCY_AARCH32: |
| return psci_stat_residency(x1, x2); |
| |
| case PSCI_STAT_COUNT_AARCH32: |
| return psci_stat_count(x1, x2); |
| #endif |
| case PSCI_MEM_PROTECT: |
| return psci_mem_protect(x1); |
| |
| case PSCI_MEM_CHK_RANGE_AARCH32: |
| return psci_mem_chk_range(x1, x2); |
| |
| case PSCI_SYSTEM_RESET2_AARCH32: |
| /* We should never return from psci_system_reset2() */ |
| return psci_system_reset2(x1, x2); |
| |
| default: |
| break; |
| } |
| } else { |
| /* 64-bit PSCI function */ |
| |
| switch (smc_fid) { |
| case PSCI_CPU_SUSPEND_AARCH64: |
| return psci_cpu_suspend(x1, x2, x3); |
| |
| case PSCI_CPU_ON_AARCH64: |
| return psci_cpu_on(x1, x2, x3); |
| |
| case PSCI_AFFINITY_INFO_AARCH64: |
| return psci_affinity_info(x1, x2); |
| |
| case PSCI_MIG_AARCH64: |
| return psci_migrate(x1); |
| |
| case PSCI_MIG_INFO_UP_CPU_AARCH64: |
| return psci_migrate_info_up_cpu(); |
| |
| case PSCI_NODE_HW_STATE_AARCH64: |
| return psci_node_hw_state(x1, x2); |
| |
| case PSCI_SYSTEM_SUSPEND_AARCH64: |
| return psci_system_suspend(x1, x2); |
| |
| #if ENABLE_PSCI_STAT |
| case PSCI_STAT_RESIDENCY_AARCH64: |
| return psci_stat_residency(x1, x2); |
| |
| case PSCI_STAT_COUNT_AARCH64: |
| return psci_stat_count(x1, x2); |
| #endif |
| |
| case PSCI_MEM_CHK_RANGE_AARCH64: |
| return psci_mem_chk_range(x1, x2); |
| |
| case PSCI_SYSTEM_RESET2_AARCH64: |
| /* We should never return from psci_system_reset2() */ |
| return psci_system_reset2(x1, x2); |
| |
| default: |
| break; |
| } |
| } |
| |
| WARN("Unimplemented PSCI Call: 0x%x \n", smc_fid); |
| return SMC_UNK; |
| } |