blob: 00c6008aab03fd7a8d9e84c0b40e9a05fcf92264 [file] [log] [blame]
/*
* Copyright (c) 2013-2024, Arm Limited and Contributors. All rights reserved.
* Copyright (c) 2022, NVIDIA Corporation. All rights reserved.
*
* SPDX-License-Identifier: BSD-3-Clause
*/
#include <assert.h>
#include <stdbool.h>
#include <string.h>
#include <platform_def.h>
#include <arch.h>
#include <arch_helpers.h>
#include <arch_features.h>
#include <bl31/interrupt_mgmt.h>
#include <common/bl_common.h>
#include <common/debug.h>
#include <context.h>
#include <drivers/arm/gicv3.h>
#include <lib/el3_runtime/context_mgmt.h>
#include <lib/el3_runtime/cpu_data.h>
#include <lib/el3_runtime/pubsub_events.h>
#include <lib/extensions/amu.h>
#include <lib/extensions/brbe.h>
#include <lib/extensions/mpam.h>
#include <lib/extensions/pmuv3.h>
#include <lib/extensions/sme.h>
#include <lib/extensions/spe.h>
#include <lib/extensions/sve.h>
#include <lib/extensions/sys_reg_trace.h>
#include <lib/extensions/trbe.h>
#include <lib/extensions/trf.h>
#include <lib/utils.h>
#if ENABLE_FEAT_TWED
/* Make sure delay value fits within the range(0-15) */
CASSERT(((TWED_DELAY & ~SCR_TWEDEL_MASK) == 0U), assert_twed_delay_value_check);
#endif /* ENABLE_FEAT_TWED */
per_world_context_t per_world_context[CPU_DATA_CONTEXT_NUM];
static bool has_secure_perworld_init;
static void manage_extensions_nonsecure(cpu_context_t *ctx);
static void manage_extensions_secure(cpu_context_t *ctx);
static void manage_extensions_secure_per_world(void);
static void setup_el1_context(cpu_context_t *ctx, const struct entry_point_info *ep)
{
u_register_t sctlr_elx, actlr_elx;
/*
* Initialise SCTLR_EL1 to the reset value corresponding to the target
* execution state setting all fields rather than relying on the hw.
* Some fields have architecturally UNKNOWN reset values and these are
* set to zero.
*
* SCTLR.EE: Endianness is taken from the entrypoint attributes.
*
* SCTLR.M, SCTLR.C and SCTLR.I: These fields must be zero (as
* required by PSCI specification)
*/
sctlr_elx = (EP_GET_EE(ep->h.attr) != 0U) ? SCTLR_EE_BIT : 0UL;
if (GET_RW(ep->spsr) == MODE_RW_64) {
sctlr_elx |= SCTLR_EL1_RES1;
} else {
/*
* If the target execution state is AArch32 then the following
* fields need to be set.
*
* SCTRL_EL1.nTWE: Set to one so that EL0 execution of WFE
* instructions are not trapped to EL1.
*
* SCTLR_EL1.nTWI: Set to one so that EL0 execution of WFI
* instructions are not trapped to EL1.
*
* SCTLR_EL1.CP15BEN: Set to one to enable EL0 execution of the
* CP15DMB, CP15DSB, and CP15ISB instructions.
*/
sctlr_elx |= SCTLR_AARCH32_EL1_RES1 | SCTLR_CP15BEN_BIT
| SCTLR_NTWI_BIT | SCTLR_NTWE_BIT;
}
#if ERRATA_A75_764081
/*
* If workaround of errata 764081 for Cortex-A75 is used then set
* SCTLR_EL1.IESB to enable Implicit Error Synchronization Barrier.
*/
sctlr_elx |= SCTLR_IESB_BIT;
#endif
/* Store the initialised SCTLR_EL1 value in the cpu_context */
write_ctx_reg(get_el1_sysregs_ctx(ctx), CTX_SCTLR_EL1, sctlr_elx);
/*
* Base the context ACTLR_EL1 on the current value, as it is
* implementation defined. The context restore process will write
* the value from the context to the actual register and can cause
* problems for processor cores that don't expect certain bits to
* be zero.
*/
actlr_elx = read_actlr_el1();
write_ctx_reg((get_el1_sysregs_ctx(ctx)), (CTX_ACTLR_EL1), (actlr_elx));
}
/******************************************************************************
* This function performs initializations that are specific to SECURE state
* and updates the cpu context specified by 'ctx'.
*****************************************************************************/
static void setup_secure_context(cpu_context_t *ctx, const struct entry_point_info *ep)
{
u_register_t scr_el3;
el3_state_t *state;
state = get_el3state_ctx(ctx);
scr_el3 = read_ctx_reg(state, CTX_SCR_EL3);
#if defined(IMAGE_BL31) && !defined(SPD_spmd)
/*
* SCR_EL3.IRQ, SCR_EL3.FIQ: Enable the physical FIQ and IRQ routing as
* indicated by the interrupt routing model for BL31.
*/
scr_el3 |= get_scr_el3_from_routing_model(SECURE);
#endif
/* Allow access to Allocation Tags when mte is set*/
if (is_feat_mte_supported()) {
scr_el3 |= SCR_ATA_BIT;
}
write_ctx_reg(state, CTX_SCR_EL3, scr_el3);
/*
* Initialize EL1 context registers unless SPMC is running
* at S-EL2.
*/
#if !SPMD_SPM_AT_SEL2
setup_el1_context(ctx, ep);
#endif
manage_extensions_secure(ctx);
/**
* manage_extensions_secure_per_world api has to be executed once,
* as the registers getting initialised, maintain constant value across
* all the cpus for the secure world.
* Henceforth, this check ensures that the registers are initialised once
* and avoids re-initialization from multiple cores.
*/
if (!has_secure_perworld_init) {
manage_extensions_secure_per_world();
}
}
#if ENABLE_RME
/******************************************************************************
* This function performs initializations that are specific to REALM state
* and updates the cpu context specified by 'ctx'.
*****************************************************************************/
static void setup_realm_context(cpu_context_t *ctx, const struct entry_point_info *ep)
{
u_register_t scr_el3;
el3_state_t *state;
state = get_el3state_ctx(ctx);
scr_el3 = read_ctx_reg(state, CTX_SCR_EL3);
scr_el3 |= SCR_NS_BIT | SCR_NSE_BIT;
/* CSV2 version 2 and above */
if (is_feat_csv2_2_supported()) {
/* Enable access to the SCXTNUM_ELx registers. */
scr_el3 |= SCR_EnSCXT_BIT;
}
write_ctx_reg(state, CTX_SCR_EL3, scr_el3);
}
#endif /* ENABLE_RME */
/******************************************************************************
* This function performs initializations that are specific to NON-SECURE state
* and updates the cpu context specified by 'ctx'.
*****************************************************************************/
static void setup_ns_context(cpu_context_t *ctx, const struct entry_point_info *ep)
{
u_register_t scr_el3;
el3_state_t *state;
state = get_el3state_ctx(ctx);
scr_el3 = read_ctx_reg(state, CTX_SCR_EL3);
/* SCR_NS: Set the NS bit */
scr_el3 |= SCR_NS_BIT;
/* Allow access to Allocation Tags when MTE is implemented. */
scr_el3 |= SCR_ATA_BIT;
#if !CTX_INCLUDE_PAUTH_REGS
/*
* Pointer Authentication feature, if present, is always enabled by default
* for Non secure lower exception levels. We do not have an explicit
* flag to set it.
* CTX_INCLUDE_PAUTH_REGS flag, is explicitly used to enable for lower
* exception levels of secure and realm worlds.
*
* To prevent the leakage between the worlds during world switch,
* we enable it only for the non-secure world.
*
* If the Secure/realm world wants to use pointer authentication,
* CTX_INCLUDE_PAUTH_REGS must be explicitly set to 1, in which case
* it will be enabled globally for all the contexts.
*
* SCR_EL3.API: Set to one to not trap any PAuth instructions at ELs
* other than EL3
*
* SCR_EL3.APK: Set to one to not trap any PAuth key values at ELs other
* than EL3
*/
scr_el3 |= SCR_API_BIT | SCR_APK_BIT;
#endif /* CTX_INCLUDE_PAUTH_REGS */
#if HANDLE_EA_EL3_FIRST_NS
/* SCR_EL3.EA: Route External Abort and SError Interrupt to EL3. */
scr_el3 |= SCR_EA_BIT;
#endif
#if RAS_TRAP_NS_ERR_REC_ACCESS
/*
* SCR_EL3.TERR: Trap Error record accesses. Accesses to the RAS ERR
* and RAS ERX registers from EL1 and EL2(from any security state)
* are trapped to EL3.
* Set here to trap only for NS EL1/EL2
*
*/
scr_el3 |= SCR_TERR_BIT;
#endif
/* CSV2 version 2 and above */
if (is_feat_csv2_2_supported()) {
/* Enable access to the SCXTNUM_ELx registers. */
scr_el3 |= SCR_EnSCXT_BIT;
}
#ifdef IMAGE_BL31
/*
* SCR_EL3.IRQ, SCR_EL3.FIQ: Enable the physical FIQ and IRQ routing as
* indicated by the interrupt routing model for BL31.
*/
scr_el3 |= get_scr_el3_from_routing_model(NON_SECURE);
#endif
write_ctx_reg(state, CTX_SCR_EL3, scr_el3);
/* Initialize EL1 context registers */
setup_el1_context(ctx, ep);
/* Initialize EL2 context registers */
#if CTX_INCLUDE_EL2_REGS
/*
* Initialize SCTLR_EL2 context register using Endianness value
* taken from the entrypoint attribute.
*/
u_register_t sctlr_el2 = (EP_GET_EE(ep->h.attr) != 0U) ? SCTLR_EE_BIT : 0UL;
sctlr_el2 |= SCTLR_EL2_RES1;
write_ctx_reg(get_el2_sysregs_ctx(ctx), CTX_SCTLR_EL2,
sctlr_el2);
if (is_feat_hcx_supported()) {
/*
* Initialize register HCRX_EL2 with its init value.
* As the value of HCRX_EL2 is UNKNOWN on reset, there is a
* chance that this can lead to unexpected behavior in lower
* ELs that have not been updated since the introduction of
* this feature if not properly initialized, especially when
* it comes to those bits that enable/disable traps.
*/
write_ctx_reg(get_el2_sysregs_ctx(ctx), CTX_HCRX_EL2,
HCRX_EL2_INIT_VAL);
}
if (is_feat_fgt_supported()) {
/*
* Initialize HFG*_EL2 registers with a default value so legacy
* systems unaware of FEAT_FGT do not get trapped due to their lack
* of initialization for this feature.
*/
write_ctx_reg(get_el2_sysregs_ctx(ctx), CTX_HFGITR_EL2,
HFGITR_EL2_INIT_VAL);
write_ctx_reg(get_el2_sysregs_ctx(ctx), CTX_HFGRTR_EL2,
HFGRTR_EL2_INIT_VAL);
write_ctx_reg(get_el2_sysregs_ctx(ctx), CTX_HFGWTR_EL2,
HFGWTR_EL2_INIT_VAL);
}
#endif /* CTX_INCLUDE_EL2_REGS */
manage_extensions_nonsecure(ctx);
}
/*******************************************************************************
* The following function performs initialization of the cpu_context 'ctx'
* for first use that is common to all security states, and sets the
* initial entrypoint state as specified by the entry_point_info structure.
*
* The EE and ST attributes are used to configure the endianness and secure
* timer availability for the new execution context.
******************************************************************************/
static void setup_context_common(cpu_context_t *ctx, const entry_point_info_t *ep)
{
u_register_t scr_el3;
el3_state_t *state;
gp_regs_t *gp_regs;
state = get_el3state_ctx(ctx);
/* Clear any residual register values from the context */
zeromem(ctx, sizeof(*ctx));
/*
* The lower-EL context is zeroed so that no stale values leak to a world.
* It is assumed that an all-zero lower-EL context is good enough for it
* to boot correctly. However, there are very few registers where this
* is not true and some values need to be recreated.
*/
#if CTX_INCLUDE_EL2_REGS
el2_sysregs_t *el2_ctx = get_el2_sysregs_ctx(ctx);
/*
* These bits are set in the gicv3 driver. Losing them (especially the
* SRE bit) is problematic for all worlds. Henceforth recreate them.
*/
u_register_t icc_sre_el2 = ICC_SRE_DIB_BIT | ICC_SRE_DFB_BIT |
ICC_SRE_EN_BIT | ICC_SRE_SRE_BIT;
write_ctx_reg(el2_ctx, CTX_ICC_SRE_EL2, icc_sre_el2);
#endif /* CTX_INCLUDE_EL2_REGS */
/* Start with a clean SCR_EL3 copy as all relevant values are set */
scr_el3 = SCR_RESET_VAL;
/*
* SCR_EL3.TWE: Set to zero so that execution of WFE instructions at
* EL2, EL1 and EL0 are not trapped to EL3.
*
* SCR_EL3.TWI: Set to zero so that execution of WFI instructions at
* EL2, EL1 and EL0 are not trapped to EL3.
*
* SCR_EL3.SMD: Set to zero to enable SMC calls at EL1 and above, from
* both Security states and both Execution states.
*
* SCR_EL3.SIF: Set to one to disable secure instruction execution from
* Non-secure memory.
*/
scr_el3 &= ~(SCR_TWE_BIT | SCR_TWI_BIT | SCR_SMD_BIT);
scr_el3 |= SCR_SIF_BIT;
/*
* SCR_EL3.RW: Set the execution state, AArch32 or AArch64, for next
* Exception level as specified by SPSR.
*/
if (GET_RW(ep->spsr) == MODE_RW_64) {
scr_el3 |= SCR_RW_BIT;
}
/*
* SCR_EL3.ST: Traps Secure EL1 accesses to the Counter-timer Physical
* Secure timer registers to EL3, from AArch64 state only, if specified
* by the entrypoint attributes. If SEL2 is present and enabled, the ST
* bit always behaves as 1 (i.e. secure physical timer register access
* is not trapped)
*/
if (EP_GET_ST(ep->h.attr) != 0U) {
scr_el3 |= SCR_ST_BIT;
}
/*
* If FEAT_HCX is enabled, enable access to HCRX_EL2 by setting
* SCR_EL3.HXEn.
*/
if (is_feat_hcx_supported()) {
scr_el3 |= SCR_HXEn_BIT;
}
/*
* If FEAT_RNG_TRAP is enabled, all reads of the RNDR and RNDRRS
* registers are trapped to EL3.
*/
#if ENABLE_FEAT_RNG_TRAP
scr_el3 |= SCR_TRNDR_BIT;
#endif
#if FAULT_INJECTION_SUPPORT
/* Enable fault injection from lower ELs */
scr_el3 |= SCR_FIEN_BIT;
#endif
#if CTX_INCLUDE_PAUTH_REGS
/*
* Enable Pointer Authentication globally for all the worlds.
*
* SCR_EL3.API: Set to one to not trap any PAuth instructions at ELs
* other than EL3
*
* SCR_EL3.APK: Set to one to not trap any PAuth key values at ELs other
* than EL3
*/
scr_el3 |= SCR_API_BIT | SCR_APK_BIT;
#endif /* CTX_INCLUDE_PAUTH_REGS */
/*
* SCR_EL3.TCR2EN: Enable access to TCR2_ELx for AArch64 if present.
*/
if (is_feat_tcr2_supported() && (GET_RW(ep->spsr) == MODE_RW_64)) {
scr_el3 |= SCR_TCR2EN_BIT;
}
/*
* SCR_EL3.PIEN: Enable permission indirection and overlay
* registers for AArch64 if present.
*/
if (is_feat_sxpie_supported() || is_feat_sxpoe_supported()) {
scr_el3 |= SCR_PIEN_BIT;
}
/*
* SCR_EL3.GCSEn: Enable GCS registers for AArch64 if present.
*/
if ((is_feat_gcs_supported()) && (GET_RW(ep->spsr) == MODE_RW_64)) {
scr_el3 |= SCR_GCSEn_BIT;
}
/*
* SCR_EL3.HCE: Enable HVC instructions if next execution state is
* AArch64 and next EL is EL2, or if next execution state is AArch32 and
* next mode is Hyp.
* SCR_EL3.FGTEn: Enable Fine Grained Virtualization Traps under the
* same conditions as HVC instructions and when the processor supports
* ARMv8.6-FGT.
* SCR_EL3.ECVEn: Enable Enhanced Counter Virtualization (ECV)
* CNTPOFF_EL2 register under the same conditions as HVC instructions
* and when the processor supports ECV.
*/
if (((GET_RW(ep->spsr) == MODE_RW_64) && (GET_EL(ep->spsr) == MODE_EL2))
|| ((GET_RW(ep->spsr) != MODE_RW_64)
&& (GET_M32(ep->spsr) == MODE32_hyp))) {
scr_el3 |= SCR_HCE_BIT;
if (is_feat_fgt_supported()) {
scr_el3 |= SCR_FGTEN_BIT;
}
if (is_feat_ecv_supported()) {
scr_el3 |= SCR_ECVEN_BIT;
}
}
/* Enable WFE trap delay in SCR_EL3 if supported and configured */
if (is_feat_twed_supported()) {
/* Set delay in SCR_EL3 */
scr_el3 &= ~(SCR_TWEDEL_MASK << SCR_TWEDEL_SHIFT);
scr_el3 |= ((TWED_DELAY & SCR_TWEDEL_MASK)
<< SCR_TWEDEL_SHIFT);
/* Enable WFE delay */
scr_el3 |= SCR_TWEDEn_BIT;
}
#if IMAGE_BL31 && defined(SPD_spmd) && SPMD_SPM_AT_SEL2
/* Enable S-EL2 if FEAT_SEL2 is implemented for all the contexts. */
if (is_feat_sel2_supported()) {
scr_el3 |= SCR_EEL2_BIT;
}
#endif /* (IMAGE_BL31 && defined(SPD_spmd) && SPMD_SPM_AT_SEL2) */
/*
* Populate EL3 state so that we've the right context
* before doing ERET
*/
write_ctx_reg(state, CTX_SCR_EL3, scr_el3);
write_ctx_reg(state, CTX_ELR_EL3, ep->pc);
write_ctx_reg(state, CTX_SPSR_EL3, ep->spsr);
/*
* Store the X0-X7 value from the entrypoint into the context
* Use memcpy as we are in control of the layout of the structures
*/
gp_regs = get_gpregs_ctx(ctx);
memcpy(gp_regs, (void *)&ep->args, sizeof(aapcs64_params_t));
}
/*******************************************************************************
* Context management library initialization routine. This library is used by
* runtime services to share pointers to 'cpu_context' structures for secure
* non-secure and realm states. Management of the structures and their associated
* memory is not done by the context management library e.g. the PSCI service
* manages the cpu context used for entry from and exit to the non-secure state.
* The Secure payload dispatcher service manages the context(s) corresponding to
* the secure state. It also uses this library to get access to the non-secure
* state cpu context pointers.
* Lastly, this library provides the API to make SP_EL3 point to the cpu context
* which will be used for programming an entry into a lower EL. The same context
* will be used to save state upon exception entry from that EL.
******************************************************************************/
void __init cm_init(void)
{
/*
* The context management library has only global data to initialize, but
* that will be done when the BSS is zeroed out.
*/
}
/*******************************************************************************
* This is the high-level function used to initialize the cpu_context 'ctx' for
* first use. It performs initializations that are common to all security states
* and initializations specific to the security state specified in 'ep'
******************************************************************************/
void cm_setup_context(cpu_context_t *ctx, const entry_point_info_t *ep)
{
unsigned int security_state;
assert(ctx != NULL);
/*
* Perform initializations that are common
* to all security states
*/
setup_context_common(ctx, ep);
security_state = GET_SECURITY_STATE(ep->h.attr);
/* Perform security state specific initializations */
switch (security_state) {
case SECURE:
setup_secure_context(ctx, ep);
break;
#if ENABLE_RME
case REALM:
setup_realm_context(ctx, ep);
break;
#endif
case NON_SECURE:
setup_ns_context(ctx, ep);
break;
default:
ERROR("Invalid security state\n");
panic();
break;
}
}
/*******************************************************************************
* Enable architecture extensions for EL3 execution. This function only updates
* registers in-place which are expected to either never change or be
* overwritten by el3_exit.
******************************************************************************/
#if IMAGE_BL31
void cm_manage_extensions_el3(void)
{
if (is_feat_spe_supported()) {
spe_init_el3();
}
if (is_feat_amu_supported()) {
amu_init_el3();
}
if (is_feat_sme_supported()) {
sme_init_el3();
}
if (is_feat_trbe_supported()) {
trbe_init_el3();
}
if (is_feat_brbe_supported()) {
brbe_init_el3();
}
if (is_feat_trf_supported()) {
trf_init_el3();
}
pmuv3_init_el3();
}
#endif /* IMAGE_BL31 */
/******************************************************************************
* Function to initialise the registers with the RESET values in the context
* memory, which are maintained per world.
******************************************************************************/
#if IMAGE_BL31
void cm_el3_arch_init_per_world(per_world_context_t *per_world_ctx)
{
/*
* Initialise CPTR_EL3, setting all fields rather than relying on hw.
*
* CPTR_EL3.TFP: Set to zero so that accesses to the V- or Z- registers
* by Advanced SIMD, floating-point or SVE instructions (if
* implemented) do not trap to EL3.
*
* CPTR_EL3.TCPAC: Set to zero so that accesses to CPACR_EL1,
* CPTR_EL2,CPACR, or HCPTR do not trap to EL3.
*/
uint64_t cptr_el3 = CPTR_EL3_RESET_VAL & ~(TCPAC_BIT | TFP_BIT);
per_world_ctx->ctx_cptr_el3 = cptr_el3;
/*
* Initialize MPAM3_EL3 to its default reset value
*
* MPAM3_EL3_RESET_VAL sets the MPAM3_EL3.TRAPLOWER bit that forces
* all lower ELn MPAM3_EL3 register access to, trap to EL3
*/
per_world_ctx->ctx_mpam3_el3 = MPAM3_EL3_RESET_VAL;
}
#endif /* IMAGE_BL31 */
/*******************************************************************************
* Initialise per_world_context for Non-Secure world.
* This function enables the architecture extensions, which have same value
* across the cores for the non-secure world.
******************************************************************************/
#if IMAGE_BL31
void manage_extensions_nonsecure_per_world(void)
{
cm_el3_arch_init_per_world(&per_world_context[CPU_CONTEXT_NS]);
if (is_feat_sme_supported()) {
sme_enable_per_world(&per_world_context[CPU_CONTEXT_NS]);
}
if (is_feat_sve_supported()) {
sve_enable_per_world(&per_world_context[CPU_CONTEXT_NS]);
}
if (is_feat_amu_supported()) {
amu_enable_per_world(&per_world_context[CPU_CONTEXT_NS]);
}
if (is_feat_sys_reg_trace_supported()) {
sys_reg_trace_enable_per_world(&per_world_context[CPU_CONTEXT_NS]);
}
if (is_feat_mpam_supported()) {
mpam_enable_per_world(&per_world_context[CPU_CONTEXT_NS]);
}
}
#endif /* IMAGE_BL31 */
/*******************************************************************************
* Initialise per_world_context for Secure world.
* This function enables the architecture extensions, which have same value
* across the cores for the secure world.
******************************************************************************/
static void manage_extensions_secure_per_world(void)
{
#if IMAGE_BL31
cm_el3_arch_init_per_world(&per_world_context[CPU_CONTEXT_SECURE]);
if (is_feat_sme_supported()) {
if (ENABLE_SME_FOR_SWD) {
/*
* Enable SME, SVE, FPU/SIMD in secure context, SPM must ensure
* SME, SVE, and FPU/SIMD context properly managed.
*/
sme_enable_per_world(&per_world_context[CPU_CONTEXT_SECURE]);
} else {
/*
* Disable SME, SVE, FPU/SIMD in secure context so non-secure
* world can safely use the associated registers.
*/
sme_disable_per_world(&per_world_context[CPU_CONTEXT_SECURE]);
}
}
if (is_feat_sve_supported()) {
if (ENABLE_SVE_FOR_SWD) {
/*
* Enable SVE and FPU in secure context, SPM must ensure
* that the SVE and FPU register contexts are properly managed.
*/
sve_enable_per_world(&per_world_context[CPU_CONTEXT_SECURE]);
} else {
/*
* Disable SVE and FPU in secure context so non-secure world
* can safely use them.
*/
sve_disable_per_world(&per_world_context[CPU_CONTEXT_SECURE]);
}
}
/* NS can access this but Secure shouldn't */
if (is_feat_sys_reg_trace_supported()) {
sys_reg_trace_disable_per_world(&per_world_context[CPU_CONTEXT_SECURE]);
}
has_secure_perworld_init = true;
#endif /* IMAGE_BL31 */
}
/*******************************************************************************
* Enable architecture extensions on first entry to Non-secure world.
******************************************************************************/
static void manage_extensions_nonsecure(cpu_context_t *ctx)
{
#if IMAGE_BL31
if (is_feat_amu_supported()) {
amu_enable(ctx);
}
if (is_feat_sme_supported()) {
sme_enable(ctx);
}
pmuv3_enable(ctx);
#endif /* IMAGE_BL31 */
}
/* TODO: move to lib/extensions/pauth when it has been ported to FEAT_STATE */
static __unused void enable_pauth_el2(void)
{
u_register_t hcr_el2 = read_hcr_el2();
/*
* For Armv8.3 pointer authentication feature, disable traps to EL2 when
* accessing key registers or using pointer authentication instructions
* from lower ELs.
*/
hcr_el2 |= (HCR_API_BIT | HCR_APK_BIT);
write_hcr_el2(hcr_el2);
}
#if INIT_UNUSED_NS_EL2
/*******************************************************************************
* Enable architecture extensions in-place at EL2 on first entry to Non-secure
* world when EL2 is empty and unused.
******************************************************************************/
static void manage_extensions_nonsecure_el2_unused(void)
{
#if IMAGE_BL31
if (is_feat_spe_supported()) {
spe_init_el2_unused();
}
if (is_feat_amu_supported()) {
amu_init_el2_unused();
}
if (is_feat_mpam_supported()) {
mpam_init_el2_unused();
}
if (is_feat_trbe_supported()) {
trbe_init_el2_unused();
}
if (is_feat_sys_reg_trace_supported()) {
sys_reg_trace_init_el2_unused();
}
if (is_feat_trf_supported()) {
trf_init_el2_unused();
}
pmuv3_init_el2_unused();
if (is_feat_sve_supported()) {
sve_init_el2_unused();
}
if (is_feat_sme_supported()) {
sme_init_el2_unused();
}
#if ENABLE_PAUTH
enable_pauth_el2();
#endif /* ENABLE_PAUTH */
#endif /* IMAGE_BL31 */
}
#endif /* INIT_UNUSED_NS_EL2 */
/*******************************************************************************
* Enable architecture extensions on first entry to Secure world.
******************************************************************************/
static void manage_extensions_secure(cpu_context_t *ctx)
{
#if IMAGE_BL31
if (is_feat_sme_supported()) {
if (ENABLE_SME_FOR_SWD) {
/*
* Enable SME, SVE, FPU/SIMD in secure context, secure manager
* must ensure SME, SVE, and FPU/SIMD context properly managed.
*/
sme_init_el3();
sme_enable(ctx);
} else {
/*
* Disable SME, SVE, FPU/SIMD in secure context so non-secure
* world can safely use the associated registers.
*/
sme_disable(ctx);
}
}
#endif /* IMAGE_BL31 */
}
/*******************************************************************************
* The following function initializes the cpu_context for a CPU specified by
* its `cpu_idx` for first use, and sets the initial entrypoint state as
* specified by the entry_point_info structure.
******************************************************************************/
void cm_init_context_by_index(unsigned int cpu_idx,
const entry_point_info_t *ep)
{
cpu_context_t *ctx;
ctx = cm_get_context_by_index(cpu_idx, GET_SECURITY_STATE(ep->h.attr));
cm_setup_context(ctx, ep);
}
/*******************************************************************************
* The following function initializes the cpu_context for the current CPU
* for first use, and sets the initial entrypoint state as specified by the
* entry_point_info structure.
******************************************************************************/
void cm_init_my_context(const entry_point_info_t *ep)
{
cpu_context_t *ctx;
ctx = cm_get_context(GET_SECURITY_STATE(ep->h.attr));
cm_setup_context(ctx, ep);
}
/* EL2 present but unused, need to disable safely. SCTLR_EL2 can be ignored */
static void init_nonsecure_el2_unused(cpu_context_t *ctx)
{
#if INIT_UNUSED_NS_EL2
u_register_t hcr_el2 = HCR_RESET_VAL;
u_register_t mdcr_el2;
u_register_t scr_el3;
scr_el3 = read_ctx_reg(get_el3state_ctx(ctx), CTX_SCR_EL3);
/* Set EL2 register width: Set HCR_EL2.RW to match SCR_EL3.RW */
if ((scr_el3 & SCR_RW_BIT) != 0U) {
hcr_el2 |= HCR_RW_BIT;
}
write_hcr_el2(hcr_el2);
/*
* Initialise CPTR_EL2 setting all fields rather than relying on the hw.
* All fields have architecturally UNKNOWN reset values.
*/
write_cptr_el2(CPTR_EL2_RESET_VAL);
/*
* Initialise CNTHCTL_EL2. All fields are architecturally UNKNOWN on
* reset and are set to zero except for field(s) listed below.
*
* CNTHCTL_EL2.EL1PTEN: Set to one to disable traps to Hyp mode of
* Non-secure EL0 and EL1 accesses to the physical timer registers.
*
* CNTHCTL_EL2.EL1PCTEN: Set to one to disable traps to Hyp mode of
* Non-secure EL0 and EL1 accesses to the physical counter registers.
*/
write_cnthctl_el2(CNTHCTL_RESET_VAL | EL1PCEN_BIT | EL1PCTEN_BIT);
/*
* Initialise CNTVOFF_EL2 to zero as it resets to an architecturally
* UNKNOWN value.
*/
write_cntvoff_el2(0);
/*
* Set VPIDR_EL2 and VMPIDR_EL2 to match MIDR_EL1 and MPIDR_EL1
* respectively.
*/
write_vpidr_el2(read_midr_el1());
write_vmpidr_el2(read_mpidr_el1());
/*
* Initialise VTTBR_EL2. All fields are architecturally UNKNOWN on reset.
*
* VTTBR_EL2.VMID: Set to zero. Even though EL1&0 stage 2 address
* translation is disabled, cache maintenance operations depend on the
* VMID.
*
* VTTBR_EL2.BADDR: Set to zero as EL1&0 stage 2 address translation is
* disabled.
*/
write_vttbr_el2(VTTBR_RESET_VAL &
~((VTTBR_VMID_MASK << VTTBR_VMID_SHIFT) |
(VTTBR_BADDR_MASK << VTTBR_BADDR_SHIFT)));
/*
* Initialise MDCR_EL2, setting all fields rather than relying on hw.
* Some fields are architecturally UNKNOWN on reset.
*
* MDCR_EL2.TDRA: Set to zero so that Non-secure EL0 and EL1 System
* register accesses to the Debug ROM registers are not trapped to EL2.
*
* MDCR_EL2.TDOSA: Set to zero so that Non-secure EL1 System register
* accesses to the powerdown debug registers are not trapped to EL2.
*
* MDCR_EL2.TDA: Set to zero so that System register accesses to the
* debug registers do not trap to EL2.
*
* MDCR_EL2.TDE: Set to zero so that debug exceptions are not routed to
* EL2.
*/
mdcr_el2 = MDCR_EL2_RESET_VAL &
~(MDCR_EL2_TDRA_BIT | MDCR_EL2_TDOSA_BIT | MDCR_EL2_TDA_BIT |
MDCR_EL2_TDE_BIT);
write_mdcr_el2(mdcr_el2);
/*
* Initialise HSTR_EL2. All fields are architecturally UNKNOWN on reset.
*
* HSTR_EL2.T<n>: Set all these fields to zero so that Non-secure EL0 or
* EL1 accesses to System registers do not trap to EL2.
*/
write_hstr_el2(HSTR_EL2_RESET_VAL & ~(HSTR_EL2_T_MASK));
/*
* Initialise CNTHP_CTL_EL2. All fields are architecturally UNKNOWN on
* reset.
*
* CNTHP_CTL_EL2:ENABLE: Set to zero to disable the EL2 physical timer
* and prevent timer interrupts.
*/
write_cnthp_ctl_el2(CNTHP_CTL_RESET_VAL & ~(CNTHP_CTL_ENABLE_BIT));
manage_extensions_nonsecure_el2_unused();
#endif /* INIT_UNUSED_NS_EL2 */
}
/*******************************************************************************
* Prepare the CPU system registers for first entry into realm, secure, or
* normal world.
*
* If execution is requested to EL2 or hyp mode, SCTLR_EL2 is initialized
* If execution is requested to non-secure EL1 or svc mode, and the CPU supports
* EL2 then EL2 is disabled by configuring all necessary EL2 registers.
* For all entries, the EL1 registers are initialized from the cpu_context
******************************************************************************/
void cm_prepare_el3_exit(uint32_t security_state)
{
u_register_t sctlr_elx, scr_el3;
cpu_context_t *ctx = cm_get_context(security_state);
assert(ctx != NULL);
if (security_state == NON_SECURE) {
uint64_t el2_implemented = el_implemented(2);
scr_el3 = read_ctx_reg(get_el3state_ctx(ctx),
CTX_SCR_EL3);
if (((scr_el3 & SCR_HCE_BIT) != 0U)
|| (el2_implemented != EL_IMPL_NONE)) {
/*
* If context is not being used for EL2, initialize
* HCRX_EL2 with its init value here.
*/
if (is_feat_hcx_supported()) {
write_hcrx_el2(HCRX_EL2_INIT_VAL);
}
/*
* Initialize Fine-grained trap registers introduced
* by FEAT_FGT so all traps are initially disabled when
* switching to EL2 or a lower EL, preventing undesired
* behavior.
*/
if (is_feat_fgt_supported()) {
/*
* Initialize HFG*_EL2 registers with a default
* value so legacy systems unaware of FEAT_FGT
* do not get trapped due to their lack of
* initialization for this feature.
*/
write_hfgitr_el2(HFGITR_EL2_INIT_VAL);
write_hfgrtr_el2(HFGRTR_EL2_INIT_VAL);
write_hfgwtr_el2(HFGWTR_EL2_INIT_VAL);
}
}
if ((scr_el3 & SCR_HCE_BIT) != 0U) {
/* Use SCTLR_EL1.EE value to initialise sctlr_el2 */
sctlr_elx = read_ctx_reg(get_el1_sysregs_ctx(ctx),
CTX_SCTLR_EL1);
sctlr_elx &= SCTLR_EE_BIT;
sctlr_elx |= SCTLR_EL2_RES1;
#if ERRATA_A75_764081
/*
* If workaround of errata 764081 for Cortex-A75 is used
* then set SCTLR_EL2.IESB to enable Implicit Error
* Synchronization Barrier.
*/
sctlr_elx |= SCTLR_IESB_BIT;
#endif
write_sctlr_el2(sctlr_elx);
} else if (el2_implemented != EL_IMPL_NONE) {
init_nonsecure_el2_unused(ctx);
}
}
cm_el1_sysregs_context_restore(security_state);
cm_set_next_eret_context(security_state);
}
#if CTX_INCLUDE_EL2_REGS
static void el2_sysregs_context_save_fgt(el2_sysregs_t *ctx)
{
write_ctx_reg(ctx, CTX_HDFGRTR_EL2, read_hdfgrtr_el2());
if (is_feat_amu_supported()) {
write_ctx_reg(ctx, CTX_HAFGRTR_EL2, read_hafgrtr_el2());
}
write_ctx_reg(ctx, CTX_HDFGWTR_EL2, read_hdfgwtr_el2());
write_ctx_reg(ctx, CTX_HFGITR_EL2, read_hfgitr_el2());
write_ctx_reg(ctx, CTX_HFGRTR_EL2, read_hfgrtr_el2());
write_ctx_reg(ctx, CTX_HFGWTR_EL2, read_hfgwtr_el2());
}
static void el2_sysregs_context_restore_fgt(el2_sysregs_t *ctx)
{
write_hdfgrtr_el2(read_ctx_reg(ctx, CTX_HDFGRTR_EL2));
if (is_feat_amu_supported()) {
write_hafgrtr_el2(read_ctx_reg(ctx, CTX_HAFGRTR_EL2));
}
write_hdfgwtr_el2(read_ctx_reg(ctx, CTX_HDFGWTR_EL2));
write_hfgitr_el2(read_ctx_reg(ctx, CTX_HFGITR_EL2));
write_hfgrtr_el2(read_ctx_reg(ctx, CTX_HFGRTR_EL2));
write_hfgwtr_el2(read_ctx_reg(ctx, CTX_HFGWTR_EL2));
}
#if CTX_INCLUDE_MPAM_REGS
static void el2_sysregs_context_save_mpam(mpam_t *ctx)
{
u_register_t mpam_idr = read_mpamidr_el1();
write_ctx_reg(ctx, CTX_MPAM2_EL2, read_mpam2_el2());
/*
* The context registers that we intend to save would be part of the
* PE's system register frame only if MPAMIDR_EL1.HAS_HCR == 1.
*/
if ((mpam_idr & MPAMIDR_HAS_HCR_BIT) == 0U) {
return;
}
/*
* MPAMHCR_EL2, MPAMVPMV_EL2 and MPAMVPM0_EL2 are always present if
* MPAMIDR_HAS_HCR_BIT == 1.
*/
write_ctx_reg(ctx, CTX_MPAMHCR_EL2, read_mpamhcr_el2());
write_ctx_reg(ctx, CTX_MPAMVPM0_EL2, read_mpamvpm0_el2());
write_ctx_reg(ctx, CTX_MPAMVPMV_EL2, read_mpamvpmv_el2());
/*
* The number of MPAMVPM registers is implementation defined, their
* number is stored in the MPAMIDR_EL1 register.
*/
switch ((mpam_idr >> MPAMIDR_EL1_VPMR_MAX_SHIFT) & MPAMIDR_EL1_VPMR_MAX_MASK) {
case 7:
write_ctx_reg(ctx, CTX_MPAMVPM7_EL2, read_mpamvpm7_el2());
__fallthrough;
case 6:
write_ctx_reg(ctx, CTX_MPAMVPM6_EL2, read_mpamvpm6_el2());
__fallthrough;
case 5:
write_ctx_reg(ctx, CTX_MPAMVPM5_EL2, read_mpamvpm5_el2());
__fallthrough;
case 4:
write_ctx_reg(ctx, CTX_MPAMVPM4_EL2, read_mpamvpm4_el2());
__fallthrough;
case 3:
write_ctx_reg(ctx, CTX_MPAMVPM3_EL2, read_mpamvpm3_el2());
__fallthrough;
case 2:
write_ctx_reg(ctx, CTX_MPAMVPM2_EL2, read_mpamvpm2_el2());
__fallthrough;
case 1:
write_ctx_reg(ctx, CTX_MPAMVPM1_EL2, read_mpamvpm1_el2());
break;
}
}
#endif /* CTX_INCLUDE_MPAM_REGS */
#if CTX_INCLUDE_MPAM_REGS
static void el2_sysregs_context_restore_mpam(mpam_t *ctx)
{
u_register_t mpam_idr = read_mpamidr_el1();
write_mpam2_el2(read_ctx_reg(ctx, CTX_MPAM2_EL2));
if ((mpam_idr & MPAMIDR_HAS_HCR_BIT) == 0U) {
return;
}
write_mpamhcr_el2(read_ctx_reg(ctx, CTX_MPAMHCR_EL2));
write_mpamvpm0_el2(read_ctx_reg(ctx, CTX_MPAMVPM0_EL2));
write_mpamvpmv_el2(read_ctx_reg(ctx, CTX_MPAMVPMV_EL2));
switch ((mpam_idr >> MPAMIDR_EL1_VPMR_MAX_SHIFT) & MPAMIDR_EL1_VPMR_MAX_MASK) {
case 7:
write_mpamvpm7_el2(read_ctx_reg(ctx, CTX_MPAMVPM7_EL2));
__fallthrough;
case 6:
write_mpamvpm6_el2(read_ctx_reg(ctx, CTX_MPAMVPM6_EL2));
__fallthrough;
case 5:
write_mpamvpm5_el2(read_ctx_reg(ctx, CTX_MPAMVPM5_EL2));
__fallthrough;
case 4:
write_mpamvpm4_el2(read_ctx_reg(ctx, CTX_MPAMVPM4_EL2));
__fallthrough;
case 3:
write_mpamvpm3_el2(read_ctx_reg(ctx, CTX_MPAMVPM3_EL2));
__fallthrough;
case 2:
write_mpamvpm2_el2(read_ctx_reg(ctx, CTX_MPAMVPM2_EL2));
__fallthrough;
case 1:
write_mpamvpm1_el2(read_ctx_reg(ctx, CTX_MPAMVPM1_EL2));
break;
}
}
#endif /* CTX_INCLUDE_MPAM_REGS */
/* -----------------------------------------------------
* The following registers are not added:
* AMEVCNTVOFF0<n>_EL2
* AMEVCNTVOFF1<n>_EL2
* ICH_AP0R<n>_EL2
* ICH_AP1R<n>_EL2
* ICH_LR<n>_EL2
* -----------------------------------------------------
*/
static void el2_sysregs_context_save_common(el2_sysregs_t *ctx)
{
write_ctx_reg(ctx, CTX_ACTLR_EL2, read_actlr_el2());
write_ctx_reg(ctx, CTX_AFSR0_EL2, read_afsr0_el2());
write_ctx_reg(ctx, CTX_AFSR1_EL2, read_afsr1_el2());
write_ctx_reg(ctx, CTX_AMAIR_EL2, read_amair_el2());
write_ctx_reg(ctx, CTX_CNTHCTL_EL2, read_cnthctl_el2());
write_ctx_reg(ctx, CTX_CNTVOFF_EL2, read_cntvoff_el2());
write_ctx_reg(ctx, CTX_CPTR_EL2, read_cptr_el2());
if (CTX_INCLUDE_AARCH32_REGS) {
write_ctx_reg(ctx, CTX_DBGVCR32_EL2, read_dbgvcr32_el2());
}
write_ctx_reg(ctx, CTX_ELR_EL2, read_elr_el2());
write_ctx_reg(ctx, CTX_ESR_EL2, read_esr_el2());
write_ctx_reg(ctx, CTX_FAR_EL2, read_far_el2());
write_ctx_reg(ctx, CTX_HACR_EL2, read_hacr_el2());
write_ctx_reg(ctx, CTX_HCR_EL2, read_hcr_el2());
write_ctx_reg(ctx, CTX_HPFAR_EL2, read_hpfar_el2());
write_ctx_reg(ctx, CTX_HSTR_EL2, read_hstr_el2());
/*
* Set the NS bit to be able to access the ICC_SRE_EL2 register
* TODO: remove with root context
*/
u_register_t scr_el3 = read_scr_el3();
write_scr_el3(scr_el3 | SCR_NS_BIT);
isb();
write_ctx_reg(ctx, CTX_ICC_SRE_EL2, read_icc_sre_el2());
write_scr_el3(scr_el3);
isb();
write_ctx_reg(ctx, CTX_ICH_HCR_EL2, read_ich_hcr_el2());
write_ctx_reg(ctx, CTX_ICH_VMCR_EL2, read_ich_vmcr_el2());
write_ctx_reg(ctx, CTX_MAIR_EL2, read_mair_el2());
write_ctx_reg(ctx, CTX_MDCR_EL2, read_mdcr_el2());
write_ctx_reg(ctx, CTX_SCTLR_EL2, read_sctlr_el2());
write_ctx_reg(ctx, CTX_SPSR_EL2, read_spsr_el2());
write_ctx_reg(ctx, CTX_SP_EL2, read_sp_el2());
write_ctx_reg(ctx, CTX_TCR_EL2, read_tcr_el2());
write_ctx_reg(ctx, CTX_TPIDR_EL2, read_tpidr_el2());
write_ctx_reg(ctx, CTX_TTBR0_EL2, read_ttbr0_el2());
write_ctx_reg(ctx, CTX_VBAR_EL2, read_vbar_el2());
write_ctx_reg(ctx, CTX_VMPIDR_EL2, read_vmpidr_el2());
write_ctx_reg(ctx, CTX_VPIDR_EL2, read_vpidr_el2());
write_ctx_reg(ctx, CTX_VTCR_EL2, read_vtcr_el2());
write_ctx_reg(ctx, CTX_VTTBR_EL2, read_vttbr_el2());
}
static void el2_sysregs_context_restore_common(el2_sysregs_t *ctx)
{
write_actlr_el2(read_ctx_reg(ctx, CTX_ACTLR_EL2));
write_afsr0_el2(read_ctx_reg(ctx, CTX_AFSR0_EL2));
write_afsr1_el2(read_ctx_reg(ctx, CTX_AFSR1_EL2));
write_amair_el2(read_ctx_reg(ctx, CTX_AMAIR_EL2));
write_cnthctl_el2(read_ctx_reg(ctx, CTX_CNTHCTL_EL2));
write_cntvoff_el2(read_ctx_reg(ctx, CTX_CNTVOFF_EL2));
write_cptr_el2(read_ctx_reg(ctx, CTX_CPTR_EL2));
if (CTX_INCLUDE_AARCH32_REGS) {
write_dbgvcr32_el2(read_ctx_reg(ctx, CTX_DBGVCR32_EL2));
}
write_elr_el2(read_ctx_reg(ctx, CTX_ELR_EL2));
write_esr_el2(read_ctx_reg(ctx, CTX_ESR_EL2));
write_far_el2(read_ctx_reg(ctx, CTX_FAR_EL2));
write_hacr_el2(read_ctx_reg(ctx, CTX_HACR_EL2));
write_hcr_el2(read_ctx_reg(ctx, CTX_HCR_EL2));
write_hpfar_el2(read_ctx_reg(ctx, CTX_HPFAR_EL2));
write_hstr_el2(read_ctx_reg(ctx, CTX_HSTR_EL2));
/*
* Set the NS bit to be able to access the ICC_SRE_EL2 register
* TODO: remove with root context
*/
u_register_t scr_el3 = read_scr_el3();
write_scr_el3(scr_el3 | SCR_NS_BIT);
isb();
write_icc_sre_el2(read_ctx_reg(ctx, CTX_ICC_SRE_EL2));
write_scr_el3(scr_el3);
isb();
write_ich_hcr_el2(read_ctx_reg(ctx, CTX_ICH_HCR_EL2));
write_ich_vmcr_el2(read_ctx_reg(ctx, CTX_ICH_VMCR_EL2));
write_mair_el2(read_ctx_reg(ctx, CTX_MAIR_EL2));
write_mdcr_el2(read_ctx_reg(ctx, CTX_MDCR_EL2));
write_sctlr_el2(read_ctx_reg(ctx, CTX_SCTLR_EL2));
write_spsr_el2(read_ctx_reg(ctx, CTX_SPSR_EL2));
write_sp_el2(read_ctx_reg(ctx, CTX_SP_EL2));
write_tcr_el2(read_ctx_reg(ctx, CTX_TCR_EL2));
write_tpidr_el2(read_ctx_reg(ctx, CTX_TPIDR_EL2));
write_ttbr0_el2(read_ctx_reg(ctx, CTX_TTBR0_EL2));
write_vbar_el2(read_ctx_reg(ctx, CTX_VBAR_EL2));
write_vmpidr_el2(read_ctx_reg(ctx, CTX_VMPIDR_EL2));
write_vpidr_el2(read_ctx_reg(ctx, CTX_VPIDR_EL2));
write_vtcr_el2(read_ctx_reg(ctx, CTX_VTCR_EL2));
write_vttbr_el2(read_ctx_reg(ctx, CTX_VTTBR_EL2));
}
/*******************************************************************************
* Save EL2 sysreg context
******************************************************************************/
void cm_el2_sysregs_context_save(uint32_t security_state)
{
cpu_context_t *ctx;
el2_sysregs_t *el2_sysregs_ctx;
ctx = cm_get_context(security_state);
assert(ctx != NULL);
el2_sysregs_ctx = get_el2_sysregs_ctx(ctx);
el2_sysregs_context_save_common(el2_sysregs_ctx);
if (is_feat_mte_supported()) {
write_ctx_reg(el2_sysregs_ctx, CTX_TFSR_EL2, read_tfsr_el2());
}
#if CTX_INCLUDE_MPAM_REGS
if (is_feat_mpam_supported()) {
mpam_t *mpam_ctx = get_mpam_ctx(ctx);
el2_sysregs_context_save_mpam(mpam_ctx);
}
#endif
if (is_feat_fgt_supported()) {
el2_sysregs_context_save_fgt(el2_sysregs_ctx);
}
if (is_feat_ecv_v2_supported()) {
write_ctx_reg(el2_sysregs_ctx, CTX_CNTPOFF_EL2, read_cntpoff_el2());
}
if (is_feat_vhe_supported()) {
write_ctx_reg(el2_sysregs_ctx, CTX_CONTEXTIDR_EL2, read_contextidr_el2());
write_ctx_reg(el2_sysregs_ctx, CTX_TTBR1_EL2, read_ttbr1_el2());
}
if (is_feat_ras_supported()) {
write_ctx_reg(el2_sysregs_ctx, CTX_VDISR_EL2, read_vdisr_el2());
write_ctx_reg(el2_sysregs_ctx, CTX_VSESR_EL2, read_vsesr_el2());
}
if (is_feat_nv2_supported()) {
write_ctx_reg(el2_sysregs_ctx, CTX_VNCR_EL2, read_vncr_el2());
}
if (is_feat_trf_supported()) {
write_ctx_reg(el2_sysregs_ctx, CTX_TRFCR_EL2, read_trfcr_el2());
}
/* CSV2 version 2 and above */
if (is_feat_csv2_2_supported()) {
write_ctx_reg(el2_sysregs_ctx, CTX_SCXTNUM_EL2, read_scxtnum_el2());
}
if (is_feat_hcx_supported()) {
write_ctx_reg(el2_sysregs_ctx, CTX_HCRX_EL2, read_hcrx_el2());
}
if (is_feat_tcr2_supported()) {
write_ctx_reg(el2_sysregs_ctx, CTX_TCR2_EL2, read_tcr2_el2());
}
if (is_feat_sxpie_supported()) {
write_ctx_reg(el2_sysregs_ctx, CTX_PIRE0_EL2, read_pire0_el2());
write_ctx_reg(el2_sysregs_ctx, CTX_PIR_EL2, read_pir_el2());
}
if (is_feat_s2pie_supported()) {
write_ctx_reg(el2_sysregs_ctx, CTX_S2PIR_EL2, read_s2pir_el2());
}
if (is_feat_sxpoe_supported()) {
write_ctx_reg(el2_sysregs_ctx, CTX_POR_EL2, read_por_el2());
}
if (is_feat_gcs_supported()) {
write_ctx_reg(el2_sysregs_ctx, CTX_GCSPR_EL2, read_gcspr_el2());
write_ctx_reg(el2_sysregs_ctx, CTX_GCSCR_EL2, read_gcscr_el2());
}
}
/*******************************************************************************
* Restore EL2 sysreg context
******************************************************************************/
void cm_el2_sysregs_context_restore(uint32_t security_state)
{
cpu_context_t *ctx;
el2_sysregs_t *el2_sysregs_ctx;
ctx = cm_get_context(security_state);
assert(ctx != NULL);
el2_sysregs_ctx = get_el2_sysregs_ctx(ctx);
el2_sysregs_context_restore_common(el2_sysregs_ctx);
if (is_feat_mte_supported()) {
write_tfsr_el2(read_ctx_reg(el2_sysregs_ctx, CTX_TFSR_EL2));
}
#if CTX_INCLUDE_MPAM_REGS
if (is_feat_mpam_supported()) {
mpam_t *mpam_ctx = get_mpam_ctx(ctx);
el2_sysregs_context_restore_mpam(mpam_ctx);
}
#endif
if (is_feat_fgt_supported()) {
el2_sysregs_context_restore_fgt(el2_sysregs_ctx);
}
if (is_feat_ecv_v2_supported()) {
write_cntpoff_el2(read_ctx_reg(el2_sysregs_ctx, CTX_CNTPOFF_EL2));
}
if (is_feat_vhe_supported()) {
write_contextidr_el2(read_ctx_reg(el2_sysregs_ctx, CTX_CONTEXTIDR_EL2));
write_ttbr1_el2(read_ctx_reg(el2_sysregs_ctx, CTX_TTBR1_EL2));
}
if (is_feat_ras_supported()) {
write_vdisr_el2(read_ctx_reg(el2_sysregs_ctx, CTX_VDISR_EL2));
write_vsesr_el2(read_ctx_reg(el2_sysregs_ctx, CTX_VSESR_EL2));
}
if (is_feat_nv2_supported()) {
write_vncr_el2(read_ctx_reg(el2_sysregs_ctx, CTX_VNCR_EL2));
}
if (is_feat_trf_supported()) {
write_trfcr_el2(read_ctx_reg(el2_sysregs_ctx, CTX_TRFCR_EL2));
}
/* CSV2 version 2 and above */
if (is_feat_csv2_2_supported()) {
write_scxtnum_el2(read_ctx_reg(el2_sysregs_ctx, CTX_SCXTNUM_EL2));
}
if (is_feat_hcx_supported()) {
write_hcrx_el2(read_ctx_reg(el2_sysregs_ctx, CTX_HCRX_EL2));
}
if (is_feat_tcr2_supported()) {
write_tcr2_el2(read_ctx_reg(el2_sysregs_ctx, CTX_TCR2_EL2));
}
if (is_feat_sxpie_supported()) {
write_pire0_el2(read_ctx_reg(el2_sysregs_ctx, CTX_PIRE0_EL2));
write_pir_el2(read_ctx_reg(el2_sysregs_ctx, CTX_PIR_EL2));
}
if (is_feat_s2pie_supported()) {
write_s2pir_el2(read_ctx_reg(el2_sysregs_ctx, CTX_S2PIR_EL2));
}
if (is_feat_sxpoe_supported()) {
write_por_el2(read_ctx_reg(el2_sysregs_ctx, CTX_POR_EL2));
}
if (is_feat_gcs_supported()) {
write_gcscr_el2(read_ctx_reg(el2_sysregs_ctx, CTX_GCSCR_EL2));
write_gcspr_el2(read_ctx_reg(el2_sysregs_ctx, CTX_GCSPR_EL2));
}
}
#endif /* CTX_INCLUDE_EL2_REGS */
/*******************************************************************************
* This function is used to exit to Non-secure world. If CTX_INCLUDE_EL2_REGS
* is enabled, it restores EL1 and EL2 sysreg contexts instead of directly
* updating EL1 and EL2 registers. Otherwise, it calls the generic
* cm_prepare_el3_exit function.
******************************************************************************/
void cm_prepare_el3_exit_ns(void)
{
#if CTX_INCLUDE_EL2_REGS
#if ENABLE_ASSERTIONS
cpu_context_t *ctx = cm_get_context(NON_SECURE);
assert(ctx != NULL);
/* Assert that EL2 is used. */
u_register_t scr_el3 = read_ctx_reg(get_el3state_ctx(ctx), CTX_SCR_EL3);
assert(((scr_el3 & SCR_HCE_BIT) != 0UL) &&
(el_implemented(2U) != EL_IMPL_NONE));
#endif /* ENABLE_ASSERTIONS */
/* Restore EL2 and EL1 sysreg contexts */
cm_el2_sysregs_context_restore(NON_SECURE);
cm_el1_sysregs_context_restore(NON_SECURE);
cm_set_next_eret_context(NON_SECURE);
#else
cm_prepare_el3_exit(NON_SECURE);
#endif /* CTX_INCLUDE_EL2_REGS */
}
/*******************************************************************************
* The next four functions are used by runtime services to save and restore
* EL1 context on the 'cpu_context' structure for the specified security
* state.
******************************************************************************/
void cm_el1_sysregs_context_save(uint32_t security_state)
{
cpu_context_t *ctx;
ctx = cm_get_context(security_state);
assert(ctx != NULL);
el1_sysregs_context_save(get_el1_sysregs_ctx(ctx));
#if IMAGE_BL31
if (security_state == SECURE)
PUBLISH_EVENT(cm_exited_secure_world);
else
PUBLISH_EVENT(cm_exited_normal_world);
#endif
}
void cm_el1_sysregs_context_restore(uint32_t security_state)
{
cpu_context_t *ctx;
ctx = cm_get_context(security_state);
assert(ctx != NULL);
el1_sysregs_context_restore(get_el1_sysregs_ctx(ctx));
#if IMAGE_BL31
if (security_state == SECURE)
PUBLISH_EVENT(cm_entering_secure_world);
else
PUBLISH_EVENT(cm_entering_normal_world);
#endif
}
/*******************************************************************************
* This function populates ELR_EL3 member of 'cpu_context' pertaining to the
* given security state with the given entrypoint
******************************************************************************/
void cm_set_elr_el3(uint32_t security_state, uintptr_t entrypoint)
{
cpu_context_t *ctx;
el3_state_t *state;
ctx = cm_get_context(security_state);
assert(ctx != NULL);
/* Populate EL3 state so that ERET jumps to the correct entry */
state = get_el3state_ctx(ctx);
write_ctx_reg(state, CTX_ELR_EL3, entrypoint);
}
/*******************************************************************************
* This function populates ELR_EL3 and SPSR_EL3 members of 'cpu_context'
* pertaining to the given security state
******************************************************************************/
void cm_set_elr_spsr_el3(uint32_t security_state,
uintptr_t entrypoint, uint32_t spsr)
{
cpu_context_t *ctx;
el3_state_t *state;
ctx = cm_get_context(security_state);
assert(ctx != NULL);
/* Populate EL3 state so that ERET jumps to the correct entry */
state = get_el3state_ctx(ctx);
write_ctx_reg(state, CTX_ELR_EL3, entrypoint);
write_ctx_reg(state, CTX_SPSR_EL3, spsr);
}
/*******************************************************************************
* This function updates a single bit in the SCR_EL3 member of the 'cpu_context'
* pertaining to the given security state using the value and bit position
* specified in the parameters. It preserves all other bits.
******************************************************************************/
void cm_write_scr_el3_bit(uint32_t security_state,
uint32_t bit_pos,
uint32_t value)
{
cpu_context_t *ctx;
el3_state_t *state;
u_register_t scr_el3;
ctx = cm_get_context(security_state);
assert(ctx != NULL);
/* Ensure that the bit position is a valid one */
assert(((1UL << bit_pos) & SCR_VALID_BIT_MASK) != 0U);
/* Ensure that the 'value' is only a bit wide */
assert(value <= 1U);
/*
* Get the SCR_EL3 value from the cpu context, clear the desired bit
* and set it to its new value.
*/
state = get_el3state_ctx(ctx);
scr_el3 = read_ctx_reg(state, CTX_SCR_EL3);
scr_el3 &= ~(1UL << bit_pos);
scr_el3 |= (u_register_t)value << bit_pos;
write_ctx_reg(state, CTX_SCR_EL3, scr_el3);
}
/*******************************************************************************
* This function retrieves SCR_EL3 member of 'cpu_context' pertaining to the
* given security state.
******************************************************************************/
u_register_t cm_get_scr_el3(uint32_t security_state)
{
cpu_context_t *ctx;
el3_state_t *state;
ctx = cm_get_context(security_state);
assert(ctx != NULL);
/* Populate EL3 state so that ERET jumps to the correct entry */
state = get_el3state_ctx(ctx);
return read_ctx_reg(state, CTX_SCR_EL3);
}
/*******************************************************************************
* This function is used to program the context that's used for exception
* return. This initializes the SP_EL3 to a pointer to a 'cpu_context' set for
* the required security state
******************************************************************************/
void cm_set_next_eret_context(uint32_t security_state)
{
cpu_context_t *ctx;
ctx = cm_get_context(security_state);
assert(ctx != NULL);
cm_set_next_context(ctx);
}