| /* |
| * Copyright (c) 2021-2023, Stephan Gerhold <stephan@gerhold.net> |
| * |
| * SPDX-License-Identifier: BSD-3-Clause |
| */ |
| |
| #include <arch.h> |
| #include <asm_macros.S> |
| |
| #include <msm8916_mmap.h> |
| |
| #define APCS_TCM_START_ADDR 0x10 |
| #define APCS_TCM_REDIRECT_EN_0 BIT_32(0) |
| |
| .globl plat_crash_console_init |
| .globl plat_crash_console_putc |
| .globl plat_crash_console_flush |
| .globl plat_panic_handler |
| .globl plat_my_core_pos |
| .globl plat_get_my_entrypoint |
| .globl plat_reset_handler |
| .globl platform_mem_init |
| .globl msm8916_entry_point |
| |
| /* ------------------------------------------------- |
| * int plat_crash_console_init(void) |
| * Initialize the crash console. |
| * Out: x0 - 1 on success, 0 on error |
| * Clobber list : x0 - x4 |
| * ------------------------------------------------- |
| */ |
| func plat_crash_console_init |
| mov x1, #BLSP_UART2_BASE |
| mov x0, #1 |
| b console_uartdm_core_init |
| endfunc plat_crash_console_init |
| |
| /* ------------------------------------------------- |
| * int plat_crash_console_putc(int c) |
| * Print a character on the crash console. |
| * In : w0 - character to be printed |
| * Out: w0 - printed character on success |
| * Clobber list : x1, x2 |
| * ------------------------------------------------- |
| */ |
| func plat_crash_console_putc |
| mov x1, #BLSP_UART2_BASE |
| b console_uartdm_core_putc |
| endfunc plat_crash_console_putc |
| |
| /* ------------------------------------------------- |
| * void plat_crash_console_flush(void) |
| * Force a write of all buffered data that has not |
| * been output. |
| * Clobber list : x1, x2 |
| * ------------------------------------------------- |
| */ |
| func plat_crash_console_flush |
| mov x1, #BLSP_UART2_BASE |
| b console_uartdm_core_flush |
| endfunc plat_crash_console_flush |
| |
| /* ------------------------------------------------- |
| * void plat_panic_handler(void) __dead |
| * Called when an unrecoverable error occurs. |
| * ------------------------------------------------- |
| */ |
| func plat_panic_handler |
| /* Try to shutdown/reset */ |
| mov_imm x0, MPM_PS_HOLD |
| str wzr, [x0] |
| 1: b 1b |
| endfunc plat_panic_handler |
| |
| /* ------------------------------------------------- |
| * unsigned int plat_my_core_pos(void) |
| * Out: x0 - index of the calling CPU |
| * ------------------------------------------------- |
| */ |
| func plat_my_core_pos |
| /* There is just a single cluster so this is very simple */ |
| mrs x0, mpidr_el1 |
| and x0, x0, #MPIDR_CPU_MASK |
| ret |
| endfunc plat_my_core_pos |
| |
| /* ------------------------------------------------- |
| * uintptr_t plat_get_my_entrypoint(void) |
| * Distinguish cold and warm boot and return warm boot |
| * entry address if available. |
| * Out: x0 - warm boot entry point or 0 on cold boot |
| * ------------------------------------------------- |
| */ |
| func plat_get_my_entrypoint |
| ldr x0, msm8916_entry_point |
| ret |
| endfunc plat_get_my_entrypoint |
| |
| /* ------------------------------------------------- |
| * void plat_reset_handler(void) |
| * Perform additional initialization after reset. |
| * Clobber list : x0 - x18, x30 |
| * ------------------------------------------------- |
| */ |
| func plat_reset_handler |
| /* |
| * Check if the CPU is running at the correct address. |
| * During cold boot the CPU enters here at the wrong address |
| * using the "boot remapper". (It remaps the BL31_BASE to |
| * the CPU reset address 0x0). |
| */ |
| mov x0, #BL31_BASE |
| adr x1, bl31_entrypoint |
| cmp x0, x1 |
| b.ne _remapped_cold_boot |
| /* Already running at correct address, just return directly */ |
| ret |
| |
| _remapped_cold_boot: |
| /* |
| * The previous boot stage seems to use the L2 cache as TCM. |
| * Disable the TCM redirect before enabling caches to avoid |
| * strange crashes. |
| */ |
| mov x2, #APCS_CFG |
| ldr w3, [x2, #APCS_TCM_START_ADDR] |
| and w3, w3, #~APCS_TCM_REDIRECT_EN_0 |
| str w3, [x2, #APCS_TCM_START_ADDR] |
| |
| /* Enter BL31 again at the real address */ |
| br x0 |
| endfunc plat_reset_handler |
| |
| /* ------------------------------------------------- |
| * void platform_mem_init(void) |
| * Performs additional memory initialization early |
| * in the boot process. |
| * ------------------------------------------------- |
| */ |
| func platform_mem_init |
| /* Nothing to do here, all memory is already initialized */ |
| ret |
| endfunc platform_mem_init |
| |
| .data |
| .align 3 |
| |
| /* ------------------------------------------------- |
| * Warm boot entry point for CPU. Set by PSCI code. |
| * ------------------------------------------------- |
| */ |
| msm8916_entry_point: |
| .quad 0 |