| /* |
| * Copyright (c) 2016, ARM Limited and Contributors. All rights reserved. |
| * |
| * SPDX-License-Identifier: BSD-3-Clause |
| */ |
| |
| #ifndef __SOC_H__ |
| #define __SOC_H__ |
| |
| #include <utils.h> |
| |
| #define GLB_SRST_FST_CFG_VAL 0xfdb9 |
| #define GLB_SRST_SND_CFG_VAL 0xeca8 |
| |
| #define PMUCRU_PPLL_CON(n) ((n) * 4) |
| #define CRU_PLL_CON(pll_id, n) ((pll_id) * 0x20 + (n) * 4) |
| #define PLL_MODE_MSK 0x03 |
| #define PLL_MODE_SHIFT 0x08 |
| #define PLL_BYPASS_MSK 0x01 |
| #define PLL_BYPASS_SHIFT 0x01 |
| #define PLL_PWRDN_MSK 0x01 |
| #define PLL_PWRDN_SHIFT 0x0 |
| #define PLL_BYPASS BIT(1) |
| #define PLL_PWRDN BIT(0) |
| |
| #define NO_PLL_BYPASS (0x00) |
| #define NO_PLL_PWRDN (0x00) |
| |
| #define FBDIV(n) ((0xfff << 16) | n) |
| #define POSTDIV2(n) ((0x7 << (12 + 16)) | (n << 12)) |
| #define POSTDIV1(n) ((0x7 << (8 + 16)) | (n << 8)) |
| #define REFDIV(n) ((0x3F << 16) | n) |
| #define PLL_LOCK(n) ((n >> 31) & 0x1) |
| |
| #define PLL_SLOW_MODE BITS_WITH_WMASK(SLOW_MODE,\ |
| PLL_MODE_MSK, PLL_MODE_SHIFT) |
| |
| #define PLL_NOMAL_MODE BITS_WITH_WMASK(NORMAL_MODE,\ |
| PLL_MODE_MSK, PLL_MODE_SHIFT) |
| |
| #define PLL_BYPASS_MODE BIT_WITH_WMSK(PLL_BYPASS_SHIFT) |
| #define PLL_NO_BYPASS_MODE WMSK_BIT(PLL_BYPASS_SHIFT) |
| |
| #define PLL_CON_COUNT 0x06 |
| #define CRU_CLKSEL_COUNT 108 |
| #define CRU_CLKSEL_CON(n) (0x100 + (n) * 4) |
| |
| #define PMUCRU_CLKSEL_CONUT 0x06 |
| #define PMUCRU_CLKSEL_OFFSET 0x080 |
| #define REG_SIZE 0x04 |
| #define REG_SOC_WMSK 0xffff0000 |
| #define CLK_GATE_MASK 0x01 |
| |
| #define PMUCRU_GATE_COUNT 0x03 |
| #define CRU_GATE_COUNT 0x23 |
| #define PMUCRU_GATE_CON(n) (0x100 + (n) * 4) |
| #define CRU_GATE_CON(n) (0x300 + (n) * 4) |
| |
| #define PMUCRU_RSTNHOLD_CON0 0x120 |
| enum { |
| PRESETN_NOC_PMU_HOLD = 1, |
| PRESETN_INTMEM_PMU_HOLD, |
| HRESETN_CM0S_PMU_HOLD, |
| HRESETN_CM0S_NOC_PMU_HOLD, |
| DRESETN_CM0S_PMU_HOLD, |
| POESETN_CM0S_PMU_HOLD, |
| PRESETN_SPI3_HOLD, |
| RESETN_SPI3_HOLD, |
| PRESETN_TIMER_PMU_0_1_HOLD, |
| RESETN_TIMER_PMU_0_HOLD, |
| RESETN_TIMER_PMU_1_HOLD, |
| PRESETN_UART_M0_PMU_HOLD, |
| RESETN_UART_M0_PMU_HOLD, |
| PRESETN_WDT_PMU_HOLD |
| }; |
| |
| #define PMUCRU_RSTNHOLD_CON1 0x124 |
| enum { |
| PRESETN_I2C0_HOLD, |
| PRESETN_I2C4_HOLD, |
| PRESETN_I2C8_HOLD, |
| PRESETN_MAILBOX_PMU_HOLD, |
| PRESETN_RKPWM_PMU_HOLD, |
| PRESETN_PMUGRF_HOLD, |
| PRESETN_SGRF_HOLD, |
| PRESETN_GPIO0_HOLD, |
| PRESETN_GPIO1_HOLD, |
| PRESETN_CRU_PMU_HOLD, |
| PRESETN_INTR_ARB_HOLD, |
| PRESETN_PVTM_PMU_HOLD, |
| RESETN_I2C0_HOLD, |
| RESETN_I2C4_HOLD, |
| RESETN_I2C8_HOLD |
| }; |
| |
| enum plls_id { |
| ALPLL_ID = 0, |
| ABPLL_ID, |
| DPLL_ID, |
| CPLL_ID, |
| GPLL_ID, |
| NPLL_ID, |
| VPLL_ID, |
| PPLL_ID, |
| END_PLL_ID, |
| }; |
| |
| #define CLST_L_CPUS_MSK (0xf) |
| #define CLST_B_CPUS_MSK (0x3) |
| |
| enum pll_work_mode { |
| SLOW_MODE = 0x00, |
| NORMAL_MODE = 0x01, |
| DEEP_SLOW_MODE = 0x02, |
| }; |
| |
| enum glb_sft_reset { |
| PMU_RST_BY_FIRST_SFT, |
| PMU_RST_BY_SECOND_SFT = BIT(2), |
| PMU_RST_NOT_BY_SFT = BIT(3), |
| }; |
| |
| struct pll_div { |
| uint32_t mhz; |
| uint32_t refdiv; |
| uint32_t fbdiv; |
| uint32_t postdiv1; |
| uint32_t postdiv2; |
| uint32_t frac; |
| uint32_t freq; |
| }; |
| |
| struct deepsleep_data_s { |
| uint32_t plls_con[END_PLL_ID][PLL_CON_COUNT]; |
| uint32_t cru_gate_con[CRU_GATE_COUNT]; |
| uint32_t pmucru_gate_con[PMUCRU_GATE_COUNT]; |
| }; |
| |
| struct pmu_sleep_data { |
| uint32_t pmucru_rstnhold_con0; |
| uint32_t pmucru_rstnhold_con1; |
| }; |
| |
| /************************************************** |
| * pmugrf reg, offset |
| **************************************************/ |
| #define PMUGRF_OSREG(n) (0x300 + (n) * 4) |
| |
| /************************************************** |
| * DCF reg, offset |
| **************************************************/ |
| #define DCF_DCF_CTRL 0x0 |
| #define DCF_DCF_ADDR 0x8 |
| #define DCF_DCF_ISR 0xc |
| #define DCF_DCF_TOSET 0x14 |
| #define DCF_DCF_TOCMD 0x18 |
| #define DCF_DCF_CMD_CFG 0x1c |
| |
| /* DCF_DCF_ISR */ |
| #define DCF_TIMEOUT (1 << 2) |
| #define DCF_ERR (1 << 1) |
| #define DCF_DONE (1 << 0) |
| |
| /* DCF_DCF_CTRL */ |
| #define DCF_VOP_HW_EN (1 << 2) |
| #define DCF_STOP (1 << 1) |
| #define DCF_START (1 << 0) |
| |
| #define CYCL_24M_CNT_US(us) (24 * us) |
| #define CYCL_24M_CNT_MS(ms) (ms * CYCL_24M_CNT_US(1000)) |
| #define CYCL_32K_CNT_MS(ms) (ms * 32) |
| |
| /************************************************** |
| * cru reg, offset |
| **************************************************/ |
| #define CRU_SOFTRST_CON(n) (0x400 + (n) * 4) |
| |
| #define CRU_DMAC0_RST BIT_WITH_WMSK(3) |
| /* reset release*/ |
| #define CRU_DMAC0_RST_RLS WMSK_BIT(3) |
| |
| #define CRU_DMAC1_RST BIT_WITH_WMSK(4) |
| /* reset release*/ |
| #define CRU_DMAC1_RST_RLS WMSK_BIT(4) |
| |
| #define CRU_GLB_RST_CON 0x0510 |
| #define CRU_GLB_SRST_FST 0x0500 |
| #define CRU_GLB_SRST_SND 0x0504 |
| |
| #define CRU_CLKGATE_CON(n) (0x300 + n * 4) |
| #define PCLK_GPIO2_GATE_SHIFT 3 |
| #define PCLK_GPIO3_GATE_SHIFT 4 |
| #define PCLK_GPIO4_GATE_SHIFT 5 |
| |
| /************************************************** |
| * pmu cru reg, offset |
| **************************************************/ |
| #define CRU_PMU_RSTHOLD_CON(n) (0x120 + n * 4) |
| /* reset hold*/ |
| #define CRU_PMU_SGRF_RST_HOLD BIT_WITH_WMSK(6) |
| /* reset hold release*/ |
| #define CRU_PMU_SGRF_RST_RLS WMSK_BIT(6) |
| |
| #define CRU_PMU_WDTRST_MSK (0x1 << 4) |
| #define CRU_PMU_WDTRST_EN 0x0 |
| |
| #define CRU_PMU_FIRST_SFTRST_MSK (0x3 << 2) |
| #define CRU_PMU_FIRST_SFTRST_EN 0x0 |
| |
| #define CRU_PMU_CLKGATE_CON(n) (0x100 + n * 4) |
| #define PCLK_GPIO0_GATE_SHIFT 3 |
| #define PCLK_GPIO1_GATE_SHIFT 4 |
| |
| #define CPU_BOOT_ADDR_WMASK 0xffff0000 |
| #define CPU_BOOT_ADDR_ALIGN 16 |
| |
| #define GRF_IOMUX_2BIT_MASK 0x3 |
| #define GRF_IOMUX_GPIO 0x0 |
| |
| #define GRF_GPIO4C2_IOMUX_SHIFT 4 |
| #define GRF_GPIO4C2_IOMUX_PWM 0x1 |
| #define GRF_GPIO4C6_IOMUX_SHIFT 12 |
| #define GRF_GPIO4C6_IOMUX_PWM 0x1 |
| |
| #define PWM_CNT(n) (0x0000 + 0x10 * (n)) |
| #define PWM_PERIOD_HPR(n) (0x0004 + 0x10 * (n)) |
| #define PWM_DUTY_LPR(n) (0x0008 + 0x10 * (n)) |
| #define PWM_CTRL(n) (0x000c + 0x10 * (n)) |
| |
| #define PWM_DISABLE (0 << 0) |
| #define PWM_ENABLE (1 << 0) |
| |
| /* grf reg offset */ |
| #define GRF_USBPHY0_CTRL0 0x4480 |
| #define GRF_USBPHY0_CTRL2 0x4488 |
| #define GRF_USBPHY0_CTRL3 0x448c |
| #define GRF_USBPHY0_CTRL12 0x44b0 |
| #define GRF_USBPHY0_CTRL13 0x44b4 |
| #define GRF_USBPHY0_CTRL15 0x44bc |
| #define GRF_USBPHY0_CTRL16 0x44c0 |
| |
| #define GRF_USBPHY1_CTRL0 0x4500 |
| #define GRF_USBPHY1_CTRL2 0x4508 |
| #define GRF_USBPHY1_CTRL3 0x450c |
| #define GRF_USBPHY1_CTRL12 0x4530 |
| #define GRF_USBPHY1_CTRL13 0x4534 |
| #define GRF_USBPHY1_CTRL15 0x453c |
| #define GRF_USBPHY1_CTRL16 0x4540 |
| |
| #define GRF_GPIO2A_IOMUX 0xe000 |
| #define GRF_GPIO2D_HE 0xe18c |
| #define GRF_DDRC0_CON0 0xe380 |
| #define GRF_DDRC0_CON1 0xe384 |
| #define GRF_DDRC1_CON0 0xe388 |
| #define GRF_DDRC1_CON1 0xe38c |
| #define GRF_SOC_CON_BASE 0xe200 |
| #define GRF_SOC_CON(n) (GRF_SOC_CON_BASE + (n) * 4) |
| #define GRF_IO_VSEL 0xe640 |
| |
| #define CRU_CLKSEL_CON0 0x0100 |
| #define CRU_CLKSEL_CON6 0x0118 |
| #define CRU_SDIO0_CON1 0x058c |
| #define PMUCRU_CLKSEL_CON0 0x0080 |
| #define PMUCRU_CLKGATE_CON2 0x0108 |
| #define PMUCRU_SOFTRST_CON0 0x0110 |
| #define PMUCRU_GATEDIS_CON0 0x0130 |
| #define PMUCRU_SOFTRST_CON(n) (PMUCRU_SOFTRST_CON0 + (n) * 4) |
| |
| /* export related and operating SoC APIs */ |
| void __dead2 soc_global_soft_reset(void); |
| void disable_dvfs_plls(void); |
| void disable_nodvfs_plls(void); |
| void enable_dvfs_plls(void); |
| void enable_nodvfs_plls(void); |
| void prepare_abpll_for_ddrctrl(void); |
| void restore_abpll(void); |
| void clk_gate_con_save(void); |
| void clk_gate_con_disable(void); |
| void clk_gate_con_restore(void); |
| void set_pmu_rsthold(void); |
| void pmu_sgrf_rst_hld(void); |
| __pmusramfunc void pmu_sgrf_rst_hld_release(void); |
| __pmusramfunc void restore_pmu_rsthold(void); |
| #endif /* __SOC_H__ */ |