| /* |
| * Copyright (c) 2017-2018, STMicroelectronics - All Rights Reserved |
| * |
| * SPDX-License-Identifier: BSD-3-Clause |
| */ |
| |
| #ifndef __BOOT_API_H |
| #define __BOOT_API_H |
| |
| #include <stdint.h> |
| #include <stdio.h> |
| |
| /* |
| * Possible value of boot context field 'boot_interface_sel' |
| */ |
| |
| /* Value of field 'boot_interface_sel' when no boot occurred */ |
| #define BOOT_API_CTX_BOOT_INTERFACE_SEL_NO 0x0U |
| |
| /* Boot occurred on SD */ |
| #define BOOT_API_CTX_BOOT_INTERFACE_SEL_FLASH_SD 0x1U |
| |
| /* Boot occurred on EMMC */ |
| #define BOOT_API_CTX_BOOT_INTERFACE_SEL_FLASH_EMMC 0x2U |
| |
| /** |
| * @brief Possible value of boot context field 'EmmcXferStatus' |
| */ |
| /* |
| * Possible value of boot context field 'emmc_xfer_status' |
| */ |
| #define BOOT_API_CTX_EMMC_XFER_STATUS_NOT_STARTED 0x0U |
| #define BOOT_API_CTX_EMMC_XFER_STATUS_DATAEND_DETECTED 0x1U |
| #define BOOT_API_CTX_EMMC_XFER_STATUS_XFER_OVERALL_TIMEOUT_DETECTED 0x2U |
| #define BOOT_API_CTX_EMMC_XFER_STATUS_XFER_DATA_TIMEOUT 0x3U |
| |
| /* |
| * Possible value of boot context field 'emmc_error_status' |
| */ |
| #define BOOT_API_CTX_EMMC_ERROR_STATUS_NONE 0x0U |
| #define BOOT_API_CTX_EMMC_ERROR_STATUS_CMD_TIMEOUT 0x1U |
| #define BOOT_API_CTX_EMMC_ERROR_STATUS_ACK_TIMEOUT 0x2U |
| #define BOOT_API_CTX_EMMC_ERROR_STATUS_DATA_CRC_FAIL 0x3U |
| #define BOOT_API_CTX_EMMC_ERROR_STATUS_NOT_ENOUGH_BOOT_DATA_RX 0x4U |
| #define BOOT_API_CTX_EMMC_ERROR_STATUS_HEADER_NOT_FOUND 0x5U |
| #define BOOT_API_CTX_EMMC_ERROR_STATUS_HEADER_SIZE_ZERO 0x6U |
| #define BOOT_API_CTX_EMMC_ERROR_STATUS_IMAGE_NOT_COMPLETE 0x7U |
| |
| /* Image Header related definitions */ |
| |
| /* Definition of header version */ |
| #define BOOT_API_HEADER_VERSION 0x00010000U |
| |
| /* |
| * Magic number used to detect header in memory |
| * Its value must be 'S' 'T' 'M' 0x32, i.e 0x324D5453 as field |
| * 'bootapi_image_header_t.magic' |
| * This identifies the start of a boot image. |
| */ |
| #define BOOT_API_IMAGE_HEADER_MAGIC_NB 0x324D5453U |
| |
| /* Definitions related to Authentication used in image header structure */ |
| #define BOOT_API_ECDSA_PUB_KEY_LEN_IN_BYTES 64 |
| #define BOOT_API_ECDSA_SIGNATURE_LEN_IN_BYTES 64 |
| #define BOOT_API_SHA256_DIGEST_SIZE_IN_BYTES 32 |
| |
| /* Possible values of the field 'boot_api_image_header_t.ecc_algo_type' */ |
| #define BOOT_API_ECDSA_ALGO_TYPE_P256NIST 1 |
| #define BOOT_API_ECDSA_ALGO_TYPE_BRAINPOOL256 2 |
| |
| /* |
| * Cores secure magic numbers |
| * Constant to be stored in bakcup register |
| * BOOT_API_MAGIC_NUMBER_TAMP_BCK_REG_IDX |
| */ |
| #define BOOT_API_A7_CORE0_MAGIC_NUMBER 0xCA7FACE0U |
| #define BOOT_API_A7_CORE1_MAGIC_NUMBER 0xCA7FACE1U |
| |
| /* |
| * TAMP_BCK4R register index |
| * This register is used to write a Magic Number in order to restart |
| * Cortex A7 Core 1 and make it execute @ branch address from TAMP_BCK5R |
| */ |
| #define BOOT_API_CORE1_MAGIC_NUMBER_TAMP_BCK_REG_IDX 4U |
| |
| /* |
| * TAMP_BCK5R register index |
| * This register is used to contain the branch address of |
| * Cortex A7 Core 1 when restarted by a TAMP_BCK4R magic number writing |
| */ |
| #define BOOT_API_CORE1_BRANCH_ADDRESS_TAMP_BCK_REG_IDX 5U |
| |
| /* |
| * Possible value of boot context field 'hse_clock_value_in_hz' |
| */ |
| #define BOOT_API_CTX_HSE_CLOCK_VALUE_UNDEFINED 0U |
| #define BOOT_API_CTX_HSE_CLOCK_VALUE_24_MHZ 24000000U |
| #define BOOT_API_CTX_HSE_CLOCK_VALUE_25_MHZ 25000000U |
| #define BOOT_API_CTX_HSE_CLOCK_VALUE_26_MHZ 26000000U |
| |
| /* |
| * Possible value of boot context field 'boot_partition_used_toboot' |
| */ |
| #define BOOT_API_CTX_BOOT_PARTITION_UNDEFINED 0U |
| |
| /* Used FSBL1 to boot */ |
| #define BOOT_API_CTX_BOOT_PARTITION_FSBL1 1U |
| |
| /* Used FSBL2 to boot */ |
| #define BOOT_API_CTX_BOOT_PARTITION_FSBL2 2U |
| |
| /* OTP_CFG0 */ |
| #define BOOT_API_OTP_MODE_WORD_NB 0 |
| /* Closed = OTP_CFG0[6] */ |
| #define BOOT_API_OTP_MODE_CLOSED_BIT_POS 6 |
| |
| /* |
| * Boot Context related definitions |
| */ |
| |
| /* |
| * Boot core boot configuration structure |
| * Specifies all items of the cold boot configuration |
| * Memory and peripheral part. |
| */ |
| typedef struct { |
| /* |
| * Boot interface used to boot : take values from defines |
| * BOOT_API_CTX_BOOT_INTERFACE_SEL_XXX above |
| */ |
| uint16_t boot_interface_selected; |
| uint16_t boot_interface_instance; |
| uint32_t reserved1[13]; |
| uint32_t otp_afmux_values[3]; |
| uint32_t reserved[9]; |
| /* |
| * Information specific to an SD boot |
| * Updated each time an SD boot is at least attempted, |
| * even if not successful |
| * Note : This is useful to understand why an SD boot failed |
| * in particular |
| */ |
| uint32_t sd_err_internal_timeout_cnt; |
| uint32_t sd_err_dcrc_fail_cnt; |
| uint32_t sd_err_dtimeout_cnt; |
| uint32_t sd_err_ctimeout_cnt; |
| uint32_t sd_err_ccrc_fail_cnt; |
| uint32_t sd_overall_retry_cnt; |
| /* |
| * Information specific to an eMMC boot |
| * Updated each time an eMMC boot is at least attempted, |
| * even if not successful |
| * Note : This is useful to understand why an eMMC boot failed |
| * in particular |
| */ |
| uint32_t emmc_xfer_status; |
| uint32_t emmc_error_status; |
| uint32_t emmc_nbbytes_rxcopied_tosysram_download_area; |
| uint32_t hse_clock_value_in_hz; |
| /* |
| * Boot partition : |
| * ie FSBL partition on which the boot was successful |
| */ |
| uint32_t boot_partition_used_toboot; |
| |
| } __packed boot_api_context_t; |
| |
| /* |
| * Image Header related definitions |
| */ |
| |
| /* |
| * Structure used to define the common Header format used for FSBL, xloader, |
| * ... and in particular used by bootROM for FSBL header readout. |
| * FSBL header size is 256 Bytes = 0x100 |
| */ |
| typedef struct { |
| /* BOOT_API_IMAGE_HEADER_MAGIC_NB */ |
| uint32_t magic; |
| uint8_t image_signature[BOOT_API_ECDSA_SIGNATURE_LEN_IN_BYTES]; |
| /* |
| * Checksum of payload |
| * 32-bit sum all all payload bytes considered as 8 bit unigned numbers, |
| * discarding any overflow bits. |
| * Use to check UART/USB downloaded image integrity when signature |
| * is not used (i.e bit 0 : 'No_sig_check' = 1 in option flags) |
| */ |
| uint32_t payload_checksum; |
| /* Image header version : should have value BOOT_API_HEADER_VERSION */ |
| uint32_t header_version; |
| /* Image length in bytes */ |
| uint32_t image_length; |
| /* |
| * Image Entry point address : should be in the SYSRAM area |
| * and at least within the download area range |
| */ |
| uint32_t image_entry_point; |
| /* Reserved */ |
| uint32_t reserved1; |
| /* |
| * Image load address : not used by bootROM but to be consistent |
| * with header format for other packages (xloader, ...) |
| */ |
| uint32_t load_address; |
| /* Reserved */ |
| uint32_t reserved2; |
| /* Image version to be compared by bootROM with monotonic |
| * counter value in OTP_CFG4 prior executing the downloaded image |
| */ |
| uint32_t image_version; |
| /* |
| * Option flags: |
| * Bit 0 : No signature check request : 'No_sig_check' |
| * value 1 : for No signature check request |
| * value 0 : No request to bypass the signature check |
| * Note : No signature check is never allowed on a Secured chip |
| */ |
| uint32_t option_flags; |
| /* |
| * Type of ECC algorithm to use : |
| * value 1 : for P-256 NIST algorithm |
| * value 2 : for Brainpool 256 algorithm |
| * See definitions 'BOOT_API_ECDSA_ALGO_TYPE_XXX' above. |
| */ |
| uint32_t ecc_algo_type; |
| /* |
| * OEM ECC Public Key (aka Root pubk) provided in header on 512 bits. |
| * The SHA-256 hash of the OEM ECC pubk must match the one stored |
| * in OTP cells. |
| */ |
| uint8_t ecc_pubk[BOOT_API_ECDSA_PUB_KEY_LEN_IN_BYTES]; |
| /* Pad up to 256 byte total size */ |
| uint8_t pad[83]; |
| /* Add binary type information */ |
| uint8_t binary_type; |
| } __packed boot_api_image_header_t; |
| |
| #endif /* __BOOT_API_H */ |