include/drivers/arm/gicv3.h - filogic/atf - Gitiles

 /*
  * Copyright (c) 2015, ARM Limited and Contributors. All rights reserved.
  *
  * Redistribution and use in source and binary forms, with or without
  * modification, are permitted provided that the following conditions are met:
  *
  * Redistributions of source code must retain the above copyright notice, this
  * list of conditions and the following disclaimer.
  *
  * Redistributions in binary form must reproduce the above copyright notice,
  * this list of conditions and the following disclaimer in the documentation
  * and/or other materials provided with the distribution.
  *
  * Neither the name of ARM nor the names of its contributors may be used
  * to endorse or promote products derived from this software without specific
  * prior written permission.
  *
  * THIS SOFTWARE IS PROVIDED BY THE COPYRIGHT HOLDERS AND CONTRIBUTORS "AS IS"
  * AND ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE
  * IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE
  * ARE DISCLAIMED. IN NO EVENT SHALL THE COPYRIGHT HOLDER OR CONTRIBUTORS BE
  * LIABLE FOR ANY DIRECT, INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY, OR
  * CONSEQUENTIAL DAMAGES (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF
  * SUBSTITUTE GOODS OR SERVICES; LOSS OF USE, DATA, OR PROFITS; OR BUSINESS
  * INTERRUPTION) HOWEVER CAUSED AND ON ANY THEORY OF LIABILITY, WHETHER IN
  * CONTRACT, STRICT LIABILITY, OR TORT (INCLUDING NEGLIGENCE OR OTHERWISE)
  * ARISING IN ANY WAY OUT OF THE USE OF THIS SOFTWARE, EVEN IF ADVISED OF THE
  * POSSIBILITY OF SUCH DAMAGE.
  */

 #ifndef __GICV3_H__
 #define __GICV3_H__

 /*******************************************************************************
  * GICv3 miscellaneous definitions
  ******************************************************************************/
 /* Interrupt group definitions */
 #define INT_TYPE_G1S		0
 #define INT_TYPE_G0		1
 #define INT_TYPE_G1NS		2

 /* Interrupt IDs reported by the HPPIR and IAR registers */
 #define PENDING_G1S_INTID	1020
 #define PENDING_G1NS_INTID	1021

 /* Constant to categorize LPI interrupt */
 #define MIN_LPI_ID		8192

 /*******************************************************************************
  * GICv3 specific Distributor interface register offsets and constants.
  ******************************************************************************/
 #define GICD_STATUSR		0x10
 #define GICD_SETSPI_NSR		0x40
 #define GICD_CLRSPI_NSR		0x48
 #define GICD_SETSPI_SR		0x50
 #define GICD_CLRSPI_SR		0x50
 #define GICD_IGRPMODR		0xd00
 #define GICD_IROUTER		0x6100
 #define GICD_PIDR2_GICV3	0xffe8

 #define IGRPMODR_SHIFT		5

 /* GICD_CTLR bit definitions */
 #define CTLR_ENABLE_G1NS_SHIFT		1
 #define CTLR_ENABLE_G1S_SHIFT		2
 #define CTLR_ARE_S_SHIFT		4
 #define CTLR_ARE_NS_SHIFT		5
 #define CTLR_DS_SHIFT			6
 #define CTLR_E1NWF_SHIFT		7
 #define GICD_CTLR_RWP_SHIFT		31

 #define CTLR_ENABLE_G1NS_MASK		0x1
 #define CTLR_ENABLE_G1S_MASK		0x1
 #define CTLR_ARE_S_MASK			0x1
 #define CTLR_ARE_NS_MASK		0x1
 #define CTLR_DS_MASK			0x1
 #define CTLR_E1NWF_MASK			0x1
 #define GICD_CTLR_RWP_MASK		0x1

 #define CTLR_ENABLE_G1NS_BIT		(1 << CTLR_ENABLE_G1NS_SHIFT)
 #define CTLR_ENABLE_G1S_BIT		(1 << CTLR_ENABLE_G1S_SHIFT)
 #define CTLR_ARE_S_BIT			(1 << CTLR_ARE_S_SHIFT)
 #define CTLR_ARE_NS_BIT			(1 << CTLR_ARE_NS_SHIFT)
 #define CTLR_DS_BIT			(1 << CTLR_DS_SHIFT)
 #define CTLR_E1NWF_BIT			(1 << CTLR_E1NWF_SHIFT)
 #define GICD_CTLR_RWP_BIT		(1 << GICD_CTLR_RWP_SHIFT)

 /* GICD_IROUTER shifts and masks */
 #define IROUTER_IRM_SHIFT	31
 #define IROUTER_IRM_MASK	0x1

 /*******************************************************************************
  * GICv3 Re-distributor interface registers & constants
  ******************************************************************************/
 #define GICR_PCPUBASE_SHIFT	0x11
 #define GICR_SGIBASE_OFFSET	(1 << 0x10)	/* 64 KB */
 #define GICR_CTLR		0x0
 #define GICR_TYPER		0x08
 #define GICR_WAKER		0x14
 #define GICR_IGROUPR0		(GICR_SGIBASE_OFFSET + 0x80)
 #define GICR_ISENABLER0		(GICR_SGIBASE_OFFSET + 0x100)
 #define GICR_ICENABLER0		(GICR_SGIBASE_OFFSET + 0x180)
 #define GICR_IPRIORITYR		(GICR_SGIBASE_OFFSET + 0x400)
 #define GICR_ICFGR0		(GICR_SGIBASE_OFFSET + 0xc00)
 #define GICR_ICFGR1		(GICR_SGIBASE_OFFSET + 0xc04)
 #define GICR_IGRPMODR0		(GICR_SGIBASE_OFFSET + 0xd00)

 /* GICR_CTLR bit definitions */
 #define GICR_CTLR_RWP_SHIFT	3
 #define GICR_CTLR_RWP_MASK	0x1
 #define GICR_CTLR_RWP_BIT	(1 << GICR_CTLR_RWP_SHIFT)

 /* GICR_WAKER bit definitions */
 #define WAKER_CA_SHIFT		2
 #define WAKER_PS_SHIFT		1

 #define WAKER_CA_MASK		0x1
 #define WAKER_PS_MASK		0x1

 #define WAKER_CA_BIT		(1 << WAKER_CA_SHIFT)
 #define WAKER_PS_BIT		(1 << WAKER_PS_SHIFT)

 /* GICR_TYPER bit definitions */
 #define TYPER_AFF_VAL_SHIFT	32
 #define TYPER_PROC_NUM_SHIFT	8
 #define TYPER_LAST_SHIFT	4

 #define TYPER_AFF_VAL_MASK	0xffffffff
 #define TYPER_PROC_NUM_MASK	0xffff
 #define TYPER_LAST_MASK		0x1

 #define TYPER_LAST_BIT		(1 << TYPER_LAST_SHIFT)

 /*******************************************************************************
  * GICv3 CPU interface registers & constants
  ******************************************************************************/
 /* ICC_SRE bit definitions*/
 #define ICC_SRE_EN_BIT		(1 << 3)
 #define ICC_SRE_DIB_BIT		(1 << 2)
 #define ICC_SRE_DFB_BIT		(1 << 1)
 #define ICC_SRE_SRE_BIT		(1 << 0)

 /* ICC_IGRPEN1_EL3 bit definitions */
 #define IGRPEN1_EL3_ENABLE_G1NS_SHIFT	0
 #define IGRPEN1_EL3_ENABLE_G1S_SHIFT	1

 #define IGRPEN1_EL3_ENABLE_G1NS_BIT	(1 << IGRPEN1_EL3_ENABLE_G1NS_SHIFT)
 #define IGRPEN1_EL3_ENABLE_G1S_BIT	(1 << IGRPEN1_EL3_ENABLE_G1S_SHIFT)

 /* ICC_IGRPEN0_EL1 bit definitions */
 #define IGRPEN1_EL1_ENABLE_G0_SHIFT	0
 #define IGRPEN1_EL1_ENABLE_G0_BIT	(1 << IGRPEN1_EL1_ENABLE_G0_SHIFT)

 /* ICC_HPPIR0_EL1 bit definitions */
 #define HPPIR0_EL1_INTID_SHIFT		0
 #define HPPIR0_EL1_INTID_MASK		0xffffff

 /* ICC_HPPIR1_EL1 bit definitions */
 #define HPPIR1_EL1_INTID_SHIFT		0
 #define HPPIR1_EL1_INTID_MASK		0xffffff

 /* ICC_IAR0_EL1 bit definitions */
 #define IAR0_EL1_INTID_SHIFT		0
 #define IAR0_EL1_INTID_MASK		0xffffff

 /* ICC_IAR1_EL1 bit definitions */
 #define IAR1_EL1_INTID_SHIFT		0
 #define IAR1_EL1_INTID_MASK		0xffffff

 #ifndef __ASSEMBLY__

 #include <stdint.h>

 #define gicv3_is_intr_id_special_identifier(id)	\
 	(((id) >= PENDING_G1S_INTID) && ((id) <= GIC_SPURIOUS_INTERRUPT))

 /*******************************************************************************
  * Helper GICv3 macros for SEL1
  ******************************************************************************/
 #define gicv3_acknowledge_interrupt_sel1()	read_icc_iar1_el1() &\
 							IAR1_EL1_INTID_MASK
 #define gicv3_get_pending_interrupt_id_sel1()	read_icc_hppir1_el1() &\
 							HPPIR1_EL1_INTID_MASK
 #define gicv3_end_of_interrupt_sel1(id)		write_icc_eoir1_el1(id)


 /*******************************************************************************
  * Helper GICv3 macros for EL3
  ******************************************************************************/
 #define gicv3_acknowledge_interrupt()		read_icc_iar0_el1() &\
 							IAR0_EL1_INTID_MASK
 #define gicv3_end_of_interrupt(id)		write_icc_eoir0_el1(id)

 /*******************************************************************************
  * This structure describes some of the implementation defined attributes of the
  * GICv3 IP. It is used by the platform port to specify these attributes in order
  * to initialise the GICV3 driver. The attributes are described below.
  *
  * 1. The 'gicd_base' field contains the base address of the Distributor
  *    interface programmer's view.
  *
  * 2. The 'gicr_base' field contains the base address of the Re-distributor
  *    interface programmer's view.
  *
  * 3. The 'g0_interrupt_array' field is a ponter to an array in which each
  *    entry corresponds to an ID of a Group 0 interrupt.
  *
  * 4. The 'g0_interrupt_num' field contains the number of entries in the
  *    'g0_interrupt_array'.
  *
  * 5. The 'g1s_interrupt_array' field is a ponter to an array in which each
  *    entry corresponds to an ID of a Group 1 interrupt.
  *
  * 6. The 'g1s_interrupt_num' field contains the number of entries in the
  *    'g1s_interrupt_array'.
  *
  * 7. The 'rdistif_num' field contains the number of Redistributor interfaces
  *    the GIC implements. This is equal to the number of CPUs or CPU interfaces
  *    instantiated in the GIC.
  *
  * 8. The 'rdistif_base_addrs' field is a pointer to an array that has an entry
  *    for storing the base address of the Redistributor interface frame of each
  *    CPU in the system. The size of the array = 'rdistif_num'. The base
  *    addresses are detected during driver initialisation.
  *
  * 9. The 'mpidr_to_core_pos' field is a pointer to a hash function which the
  *    driver will use to convert an MPIDR value to a linear core index. This
  *    index will be used for accessing the 'rdistif_base_addrs' array. This is
  *    an optional field. A GICv3 implementation maps each MPIDR to a linear core
  *    index as well. This mapping can be found by reading the "Affinity Value"
  *    and "Processor Number" fields in the GICR_TYPER. It is IMP. DEF. if the
  *    "Processor Numbers" are suitable to index into an array to access core
  *    specific information. If this not the case, the platform port must provide
  *    a hash function. Otherwise, the "Processor Number" field will be used to
  *    access the array elements.
  ******************************************************************************/
 typedef unsigned int (*mpidr_hash_fn)(unsigned long mpidr);

 typedef struct gicv3_driver_data {
 	uintptr_t gicd_base;
 	uintptr_t gicr_base;
 	unsigned int g0_interrupt_num;
 	unsigned int g1s_interrupt_num;
 	const unsigned int *g0_interrupt_array;
 	const unsigned int *g1s_interrupt_array;
 	unsigned int rdistif_num;
 	uintptr_t *rdistif_base_addrs;
 	mpidr_hash_fn mpidr_to_core_pos;
 } gicv3_driver_data_t;

 /*******************************************************************************
  * GICv3 EL3 driver API
  ******************************************************************************/
 void gicv3_driver_init(const gicv3_driver_data_t *plat_driver_data);
 void gicv3_distif_init(void);
 void gicv3_rdistif_init(unsigned int proc_num);
 void gicv3_cpuif_enable(unsigned int proc_num);
 void gicv3_cpuif_disable(unsigned int proc_num);
 unsigned int gicv3_get_pending_interrupt_type(void);
 unsigned int gicv3_get_pending_interrupt_id(void);
 unsigned int gicv3_get_interrupt_type(unsigned int id,
 					  unsigned int proc_num);


 #endif /* __ASSEMBLY__ */
 #endif /* __GICV3_H__ */
	/*
	* Copyright (c) 2015, ARM Limited and Contributors. All rights reserved.
	*
	* Redistribution and use in source and binary forms, with or without
	* modification, are permitted provided that the following conditions are met:
	*
	* Redistributions of source code must retain the above copyright notice, this
	* list of conditions and the following disclaimer.
	*
	* Redistributions in binary form must reproduce the above copyright notice,
	* this list of conditions and the following disclaimer in the documentation
	* and/or other materials provided with the distribution.
	*
	* Neither the name of ARM nor the names of its contributors may be used
	* to endorse or promote products derived from this software without specific
	* prior written permission.
	*
	* THIS SOFTWARE IS PROVIDED BY THE COPYRIGHT HOLDERS AND CONTRIBUTORS "AS IS"
	* AND ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE
	* IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE
	* ARE DISCLAIMED. IN NO EVENT SHALL THE COPYRIGHT HOLDER OR CONTRIBUTORS BE
	* LIABLE FOR ANY DIRECT, INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY, OR
	* CONSEQUENTIAL DAMAGES (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF
	* SUBSTITUTE GOODS OR SERVICES; LOSS OF USE, DATA, OR PROFITS; OR BUSINESS
	* INTERRUPTION) HOWEVER CAUSED AND ON ANY THEORY OF LIABILITY, WHETHER IN
	* CONTRACT, STRICT LIABILITY, OR TORT (INCLUDING NEGLIGENCE OR OTHERWISE)
	* ARISING IN ANY WAY OUT OF THE USE OF THIS SOFTWARE, EVEN IF ADVISED OF THE
	* POSSIBILITY OF SUCH DAMAGE.
	*/

	#ifndef __GICV3_H__
	#define __GICV3_H__

	/*******************************************************************************
	* GICv3 miscellaneous definitions
	******************************************************************************/
	/* Interrupt group definitions */
	#define INT_TYPE_G1S 0
	#define INT_TYPE_G0 1
	#define INT_TYPE_G1NS 2

	/* Interrupt IDs reported by the HPPIR and IAR registers */
	#define PENDING_G1S_INTID 1020
	#define PENDING_G1NS_INTID 1021

	/* Constant to categorize LPI interrupt */
	#define MIN_LPI_ID 8192

	/*******************************************************************************
	* GICv3 specific Distributor interface register offsets and constants.
	******************************************************************************/
	#define GICD_STATUSR 0x10
	#define GICD_SETSPI_NSR 0x40
	#define GICD_CLRSPI_NSR 0x48
	#define GICD_SETSPI_SR 0x50
	#define GICD_CLRSPI_SR 0x50
	#define GICD_IGRPMODR 0xd00
	#define GICD_IROUTER 0x6100
	#define GICD_PIDR2_GICV3 0xffe8

	#define IGRPMODR_SHIFT 5

	/* GICD_CTLR bit definitions */
	#define CTLR_ENABLE_G1NS_SHIFT 1
	#define CTLR_ENABLE_G1S_SHIFT 2
	#define CTLR_ARE_S_SHIFT 4
	#define CTLR_ARE_NS_SHIFT 5
	#define CTLR_DS_SHIFT 6
	#define CTLR_E1NWF_SHIFT 7
	#define GICD_CTLR_RWP_SHIFT 31

	#define CTLR_ENABLE_G1NS_MASK 0x1
	#define CTLR_ENABLE_G1S_MASK 0x1
	#define CTLR_ARE_S_MASK 0x1
	#define CTLR_ARE_NS_MASK 0x1
	#define CTLR_DS_MASK 0x1
	#define CTLR_E1NWF_MASK 0x1
	#define GICD_CTLR_RWP_MASK 0x1

	#define CTLR_ENABLE_G1NS_BIT (1 << CTLR_ENABLE_G1NS_SHIFT)
	#define CTLR_ENABLE_G1S_BIT (1 << CTLR_ENABLE_G1S_SHIFT)
	#define CTLR_ARE_S_BIT (1 << CTLR_ARE_S_SHIFT)
	#define CTLR_ARE_NS_BIT (1 << CTLR_ARE_NS_SHIFT)
	#define CTLR_DS_BIT (1 << CTLR_DS_SHIFT)
	#define CTLR_E1NWF_BIT (1 << CTLR_E1NWF_SHIFT)
	#define GICD_CTLR_RWP_BIT (1 << GICD_CTLR_RWP_SHIFT)

	/* GICD_IROUTER shifts and masks */
	#define IROUTER_IRM_SHIFT 31
	#define IROUTER_IRM_MASK 0x1

	/*******************************************************************************
	* GICv3 Re-distributor interface registers & constants
	******************************************************************************/
	#define GICR_PCPUBASE_SHIFT 0x11
	#define GICR_SGIBASE_OFFSET (1 << 0x10) /* 64 KB */
	#define GICR_CTLR 0x0
	#define GICR_TYPER 0x08
	#define GICR_WAKER 0x14
	#define GICR_IGROUPR0 (GICR_SGIBASE_OFFSET + 0x80)
	#define GICR_ISENABLER0 (GICR_SGIBASE_OFFSET + 0x100)
	#define GICR_ICENABLER0 (GICR_SGIBASE_OFFSET + 0x180)
	#define GICR_IPRIORITYR (GICR_SGIBASE_OFFSET + 0x400)
	#define GICR_ICFGR0 (GICR_SGIBASE_OFFSET + 0xc00)
	#define GICR_ICFGR1 (GICR_SGIBASE_OFFSET + 0xc04)
	#define GICR_IGRPMODR0 (GICR_SGIBASE_OFFSET + 0xd00)

	/* GICR_CTLR bit definitions */
	#define GICR_CTLR_RWP_SHIFT 3
	#define GICR_CTLR_RWP_MASK 0x1
	#define GICR_CTLR_RWP_BIT (1 << GICR_CTLR_RWP_SHIFT)

	/* GICR_WAKER bit definitions */
	#define WAKER_CA_SHIFT 2
	#define WAKER_PS_SHIFT 1

	#define WAKER_CA_MASK 0x1
	#define WAKER_PS_MASK 0x1

	#define WAKER_CA_BIT (1 << WAKER_CA_SHIFT)
	#define WAKER_PS_BIT (1 << WAKER_PS_SHIFT)

	/* GICR_TYPER bit definitions */
	#define TYPER_AFF_VAL_SHIFT 32
	#define TYPER_PROC_NUM_SHIFT 8
	#define TYPER_LAST_SHIFT 4

	#define TYPER_AFF_VAL_MASK 0xffffffff
	#define TYPER_PROC_NUM_MASK 0xffff
	#define TYPER_LAST_MASK 0x1

	#define TYPER_LAST_BIT (1 << TYPER_LAST_SHIFT)

	/*******************************************************************************
	* GICv3 CPU interface registers & constants
	******************************************************************************/
	/* ICC_SRE bit definitions*/
	#define ICC_SRE_EN_BIT (1 << 3)
	#define ICC_SRE_DIB_BIT (1 << 2)
	#define ICC_SRE_DFB_BIT (1 << 1)
	#define ICC_SRE_SRE_BIT (1 << 0)

	/* ICC_IGRPEN1_EL3 bit definitions */
	#define IGRPEN1_EL3_ENABLE_G1NS_SHIFT 0
	#define IGRPEN1_EL3_ENABLE_G1S_SHIFT 1

	#define IGRPEN1_EL3_ENABLE_G1NS_BIT (1 << IGRPEN1_EL3_ENABLE_G1NS_SHIFT)
	#define IGRPEN1_EL3_ENABLE_G1S_BIT (1 << IGRPEN1_EL3_ENABLE_G1S_SHIFT)

	/* ICC_IGRPEN0_EL1 bit definitions */
	#define IGRPEN1_EL1_ENABLE_G0_SHIFT 0
	#define IGRPEN1_EL1_ENABLE_G0_BIT (1 << IGRPEN1_EL1_ENABLE_G0_SHIFT)

	/* ICC_HPPIR0_EL1 bit definitions */
	#define HPPIR0_EL1_INTID_SHIFT 0
	#define HPPIR0_EL1_INTID_MASK 0xffffff

	/* ICC_HPPIR1_EL1 bit definitions */
	#define HPPIR1_EL1_INTID_SHIFT 0
	#define HPPIR1_EL1_INTID_MASK 0xffffff

	/* ICC_IAR0_EL1 bit definitions */
	#define IAR0_EL1_INTID_SHIFT 0
	#define IAR0_EL1_INTID_MASK 0xffffff

	/* ICC_IAR1_EL1 bit definitions */
	#define IAR1_EL1_INTID_SHIFT 0
	#define IAR1_EL1_INTID_MASK 0xffffff

	#ifndef __ASSEMBLY__

	#include <stdint.h>

	#define gicv3_is_intr_id_special_identifier(id) \
	(((id) >= PENDING_G1S_INTID) && ((id) <= GIC_SPURIOUS_INTERRUPT))

	/*******************************************************************************
	* Helper GICv3 macros for SEL1
	******************************************************************************/
	#define gicv3_acknowledge_interrupt_sel1() read_icc_iar1_el1() &\
	IAR1_EL1_INTID_MASK
	#define gicv3_get_pending_interrupt_id_sel1() read_icc_hppir1_el1() &\
	HPPIR1_EL1_INTID_MASK
	#define gicv3_end_of_interrupt_sel1(id) write_icc_eoir1_el1(id)


	/*******************************************************************************
	* Helper GICv3 macros for EL3
	******************************************************************************/
	#define gicv3_acknowledge_interrupt() read_icc_iar0_el1() &\
	IAR0_EL1_INTID_MASK
	#define gicv3_end_of_interrupt(id) write_icc_eoir0_el1(id)

	/*******************************************************************************
	* This structure describes some of the implementation defined attributes of the
	* GICv3 IP. It is used by the platform port to specify these attributes in order
	* to initialise the GICV3 driver. The attributes are described below.
	*
	* 1. The 'gicd_base' field contains the base address of the Distributor
	* interface programmer's view.
	*
	* 2. The 'gicr_base' field contains the base address of the Re-distributor
	* interface programmer's view.
	*
	* 3. The 'g0_interrupt_array' field is a ponter to an array in which each
	* entry corresponds to an ID of a Group 0 interrupt.
	*
	* 4. The 'g0_interrupt_num' field contains the number of entries in the
	* 'g0_interrupt_array'.
	*
	* 5. The 'g1s_interrupt_array' field is a ponter to an array in which each
	* entry corresponds to an ID of a Group 1 interrupt.
	*
	* 6. The 'g1s_interrupt_num' field contains the number of entries in the
	* 'g1s_interrupt_array'.
	*
	* 7. The 'rdistif_num' field contains the number of Redistributor interfaces
	* the GIC implements. This is equal to the number of CPUs or CPU interfaces
	* instantiated in the GIC.
	*
	* 8. The 'rdistif_base_addrs' field is a pointer to an array that has an entry
	* for storing the base address of the Redistributor interface frame of each
	* CPU in the system. The size of the array = 'rdistif_num'. The base
	* addresses are detected during driver initialisation.
	*
	* 9. The 'mpidr_to_core_pos' field is a pointer to a hash function which the
	* driver will use to convert an MPIDR value to a linear core index. This
	* index will be used for accessing the 'rdistif_base_addrs' array. This is
	* an optional field. A GICv3 implementation maps each MPIDR to a linear core
	* index as well. This mapping can be found by reading the "Affinity Value"
	* and "Processor Number" fields in the GICR_TYPER. It is IMP. DEF. if the
	* "Processor Numbers" are suitable to index into an array to access core
	* specific information. If this not the case, the platform port must provide
	* a hash function. Otherwise, the "Processor Number" field will be used to
	* access the array elements.
	******************************************************************************/
	typedef unsigned int (*mpidr_hash_fn)(unsigned long mpidr);

	typedef struct gicv3_driver_data {
	uintptr_t gicd_base;
	uintptr_t gicr_base;
	unsigned int g0_interrupt_num;
	unsigned int g1s_interrupt_num;
	const unsigned int *g0_interrupt_array;
	const unsigned int *g1s_interrupt_array;
	unsigned int rdistif_num;
	uintptr_t *rdistif_base_addrs;
	mpidr_hash_fn mpidr_to_core_pos;
	} gicv3_driver_data_t;

	/*******************************************************************************
	* GICv3 EL3 driver API
	******************************************************************************/
	void gicv3_driver_init(const gicv3_driver_data_t *plat_driver_data);
	void gicv3_distif_init(void);
	void gicv3_rdistif_init(unsigned int proc_num);
	void gicv3_cpuif_enable(unsigned int proc_num);
	void gicv3_cpuif_disable(unsigned int proc_num);
	unsigned int gicv3_get_pending_interrupt_type(void);
	unsigned int gicv3_get_pending_interrupt_id(void);
	unsigned int gicv3_get_interrupt_type(unsigned int id,
	unsigned int proc_num);


	#endif /* __ASSEMBLY__ */
	#endif /* __GICV3_H__ */