| /* |
| * Copyright (C) 2022, STMicroelectronics - All Rights Reserved |
| * |
| * SPDX-License-Identifier: BSD-3-Clause |
| */ |
| |
| #include <common/debug.h> |
| #include <drivers/delay_timer.h> |
| #include <drivers/st/stm32mp_ddr.h> |
| #include <drivers/st/stm32mp_ddrctrl_regs.h> |
| #include <drivers/st/stm32mp_pmic.h> |
| #include <lib/mmio.h> |
| |
| #include <platform_def.h> |
| |
| #define INVALID_OFFSET 0xFFU |
| |
| static uintptr_t get_base_addr(const struct stm32mp_ddr_priv *priv, enum stm32mp_ddr_base_type base) |
| { |
| if (base == DDRPHY_BASE) { |
| return (uintptr_t)priv->phy; |
| } else { |
| return (uintptr_t)priv->ctl; |
| } |
| } |
| |
| void stm32mp_ddr_set_reg(const struct stm32mp_ddr_priv *priv, enum stm32mp_ddr_reg_type type, |
| const void *param, const struct stm32mp_ddr_reg_info *ddr_registers) |
| { |
| unsigned int i; |
| unsigned int value; |
| enum stm32mp_ddr_base_type base = ddr_registers[type].base; |
| uintptr_t base_addr = get_base_addr(priv, base); |
| const struct stm32mp_ddr_reg_desc *desc = ddr_registers[type].desc; |
| |
| VERBOSE("init %s\n", ddr_registers[type].name); |
| for (i = 0; i < ddr_registers[type].size; i++) { |
| uintptr_t ptr = base_addr + desc[i].offset; |
| |
| if (desc[i].par_offset == INVALID_OFFSET) { |
| ERROR("invalid parameter offset for %s", desc[i].name); |
| panic(); |
| } else { |
| value = *((uint32_t *)((uintptr_t)param + |
| desc[i].par_offset)); |
| mmio_write_32(ptr, value); |
| } |
| } |
| } |
| |
| /* Start quasi dynamic register update */ |
| void stm32mp_ddr_start_sw_done(struct stm32mp_ddrctl *ctl) |
| { |
| mmio_clrbits_32((uintptr_t)&ctl->swctl, DDRCTRL_SWCTL_SW_DONE); |
| VERBOSE("[0x%lx] swctl = 0x%x\n", |
| (uintptr_t)&ctl->swctl, mmio_read_32((uintptr_t)&ctl->swctl)); |
| } |
| |
| /* Wait quasi dynamic register update */ |
| void stm32mp_ddr_wait_sw_done_ack(struct stm32mp_ddrctl *ctl) |
| { |
| uint64_t timeout; |
| uint32_t swstat; |
| |
| mmio_setbits_32((uintptr_t)&ctl->swctl, DDRCTRL_SWCTL_SW_DONE); |
| VERBOSE("[0x%lx] swctl = 0x%x\n", |
| (uintptr_t)&ctl->swctl, mmio_read_32((uintptr_t)&ctl->swctl)); |
| |
| timeout = timeout_init_us(TIMEOUT_US_1S); |
| do { |
| swstat = mmio_read_32((uintptr_t)&ctl->swstat); |
| VERBOSE("[0x%lx] swstat = 0x%x ", |
| (uintptr_t)&ctl->swstat, swstat); |
| if (timeout_elapsed(timeout)) { |
| panic(); |
| } |
| } while ((swstat & DDRCTRL_SWSTAT_SW_DONE_ACK) == 0U); |
| |
| VERBOSE("[0x%lx] swstat = 0x%x\n", |
| (uintptr_t)&ctl->swstat, swstat); |
| } |
| |
| void stm32mp_ddr_enable_axi_port(struct stm32mp_ddrctl *ctl) |
| { |
| /* Enable uMCTL2 AXI port 0 */ |
| mmio_setbits_32((uintptr_t)&ctl->pctrl_0, DDRCTRL_PCTRL_N_PORT_EN); |
| VERBOSE("[0x%lx] pctrl_0 = 0x%x\n", (uintptr_t)&ctl->pctrl_0, |
| mmio_read_32((uintptr_t)&ctl->pctrl_0)); |
| |
| #if STM32MP_DDR_DUAL_AXI_PORT |
| /* Enable uMCTL2 AXI port 1 */ |
| mmio_setbits_32((uintptr_t)&ctl->pctrl_1, DDRCTRL_PCTRL_N_PORT_EN); |
| VERBOSE("[0x%lx] pctrl_1 = 0x%x\n", (uintptr_t)&ctl->pctrl_1, |
| mmio_read_32((uintptr_t)&ctl->pctrl_1)); |
| #endif |
| |
| } |
| |
| int stm32mp_board_ddr_power_init(enum ddr_type ddr_type) |
| { |
| if (dt_pmic_status() > 0) { |
| return pmic_ddr_power_init(ddr_type); |
| } |
| |
| return 0; |
| } |