| /* |
| * Copyright (c) 2022, STMicroelectronics - All Rights Reserved |
| * |
| * SPDX-License-Identifier: BSD-3-Clause |
| */ |
| |
| #include <assert.h> |
| #include <errno.h> |
| #include <stdint.h> |
| |
| #include <drivers/clk.h> |
| #include <drivers/delay_timer.h> |
| #include <drivers/st/stm32_pka.h> |
| #include <drivers/st/stm32mp_reset.h> |
| #include <lib/mmio.h> |
| #include <lib/utils.h> |
| #include <libfdt.h> |
| #include <plat/common/platform.h> |
| |
| #include <platform_def.h> |
| |
| /* |
| * For our comprehension in this file |
| * _len are in BITs |
| * _size are in BYTEs |
| * _nbw are in number of PKA_word (PKA_word = u64) |
| */ |
| |
| #define UINT8_LEN 8U |
| #define UINT64_LEN (UINT8_LEN * sizeof(uint64_t)) |
| #define WORD_SIZE (sizeof(uint64_t)) |
| #define OP_NBW_FROM_LEN(len) (DIV_ROUND_UP_2EVAL((len), UINT64_LEN) + 1) |
| #define OP_NBW_FROM_SIZE(s) OP_NBW_FROM_LEN((s) * UINT8_LEN) |
| #define OP_SIZE_FROM_SIZE(s) (OP_NBW_FROM_SIZE(s) * WORD_SIZE) |
| |
| #define DT_PKA_COMPAT "st,stm32-pka64" |
| |
| #define MAX_ECC_SIZE_LEN 640U |
| #define MAX_EO_NBW OP_NBW_FROM_LEN(MAX_ECC_SIZE_LEN) |
| |
| /* PKA registers */ |
| /* PKA control register */ |
| #define _PKA_CR 0x0U |
| /* PKA status register */ |
| #define _PKA_SR 0x4U |
| /* PKA clear flag register */ |
| #define _PKA_CLRFR 0x8U |
| /* PKA version register */ |
| #define _PKA_VERR 0x1FF4U |
| /* PKA identification register */ |
| #define _PKA_IPIDR 0x1FF8U |
| |
| /* PKA control register fields */ |
| #define _PKA_CR_MODE_MASK GENMASK(13, 8) |
| #define _PKA_CR_MODE_SHIFT 8U |
| #define _PKA_CR_MODE_ADD 0x9U |
| #define _PKA_CR_MODE_ECDSA_VERIF 0x26U |
| #define _PKA_CR_START BIT(1) |
| #define _PKA_CR_EN BIT(0) |
| |
| /* PKA status register fields */ |
| #define _PKA_SR_BUSY BIT(16) |
| #define _PKA_SR_LMF BIT(1) |
| #define _PKA_SR_INITOK BIT(0) |
| |
| /* PKA it flag fields (used in CR, SR and CLRFR) */ |
| #define _PKA_IT_MASK (GENMASK(21, 19) | BIT(17)) |
| #define _PKA_IT_SHIFT 17U |
| #define _PKA_IT_OPERR BIT(21) |
| #define _PKA_IT_ADDRERR BIT(20) |
| #define _PKA_IT_RAMERR BIT(19) |
| #define _PKA_IT_PROCEND BIT(17) |
| |
| /* PKA version register fields */ |
| #define _PKA_VERR_MAJREV_MASK GENMASK(7, 4) |
| #define _PKA_VERR_MAJREV_SHIFT 4U |
| #define _PKA_VERR_MINREV_MASK GENMASK(3, 0) |
| #define _PKA_VERR_MINREV_SHIFT 0U |
| |
| /* RAM magic offset */ |
| #define _PKA_RAM_START 0x400U |
| #define _PKA_RAM_SIZE 5336U |
| |
| /* ECDSA verification */ |
| #define _PKA_RAM_N_LEN 0x408U /* 64 */ |
| #define _PKA_RAM_P_LEN 0x4C8U /* 64 */ |
| #define _PKA_RAM_A_SIGN 0x468U /* 64 */ |
| #define _PKA_RAM_A 0x470U /* EOS */ |
| #define _PKA_RAM_P 0x4D0U /* EOS */ |
| #define _PKA_RAM_XG 0x678U /* EOS */ |
| #define _PKA_RAM_YG 0x6D0U /* EOS */ |
| #define _PKA_RAM_XQ 0x12F8U /* EOS */ |
| #define _PKA_RAM_YQ 0x1350U /* EOS */ |
| #define _PKA_RAM_SIGN_R 0x10E0U /* EOS */ |
| #define _PKA_RAM_SIGN_S 0xC68U /* EOS */ |
| #define _PKA_RAM_HASH_Z 0x13A8U /* EOS */ |
| #define _PKA_RAM_PRIME_N 0x1088U /* EOS */ |
| #define _PKA_RAM_ECDSA_VERIFY 0x5D0U /* 64 */ |
| #define _PKA_RAM_ECDSA_VERIFY_VALID 0xD60DULL |
| #define _PKA_RAM_ECDSA_VERIFY_INVALID 0xA3B7ULL |
| |
| #define PKA_TIMEOUT_US 1000000U |
| #define TIMEOUT_US_1MS 1000U |
| #define PKA_RESET_DELAY 20U |
| |
| struct curve_parameters { |
| uint32_t a_sign; /* 0 positive, 1 negative */ |
| uint8_t *a; /* Curve coefficient |a| */ |
| size_t a_size; |
| uint8_t *p; /* Curve modulus value */ |
| uint32_t p_len; |
| uint8_t *xg; /* Curve base point G coordinate x */ |
| size_t xg_size; |
| uint8_t *yg; /* Curve base point G coordinate y */ |
| size_t yg_size; |
| uint8_t *n; /* Curve prime order n */ |
| uint32_t n_len; |
| }; |
| |
| static const struct curve_parameters curve_def[] = { |
| #if PKA_USE_NIST_P256 |
| [PKA_NIST_P256] = { |
| .p_len = 256U, |
| .n_len = 256U, |
| .p = (uint8_t[]){0xFF, 0xFF, 0xFF, 0xFF, 0x00, 0x00, 0x00, 0x01, |
| 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, |
| 0x00, 0x00, 0x00, 0x00, 0xFF, 0xFF, 0xFF, 0xFF, |
| 0xFF, 0xFF, 0xFF, 0xFF, 0xFF, 0xFF, 0xFF, 0xFF}, |
| .n = (uint8_t[]){0xFF, 0xFF, 0xFF, 0xFF, 0x00, 0x00, 0x00, 0x00, |
| 0xFF, 0xFF, 0xFF, 0xFF, 0xFF, 0xFF, 0xFF, 0xFF, |
| 0xBC, 0xE6, 0xFA, 0xAD, 0xA7, 0x17, 0x9E, 0x84, |
| 0xF3, 0xB9, 0xCA, 0xC2, 0xFC, 0x63, 0x25, 0x51}, |
| .a_sign = 1U, |
| .a = (uint8_t[]){0x03}, |
| .a_size = 1U, |
| .xg = (uint8_t[]){0x6B, 0x17, 0xD1, 0xF2, 0xE1, 0x2C, 0x42, 0x47, |
| 0xF8, 0xBC, 0xE6, 0xE5, 0x63, 0xA4, 0x40, 0xF2, |
| 0x77, 0x03, 0x7D, 0x81, 0x2D, 0xEB, 0x33, 0xA0, |
| 0xF4, 0xA1, 0x39, 0x45, 0xD8, 0x98, 0xC2, 0x96}, |
| .xg_size = 32U, |
| .yg = (uint8_t[]){0x4F, 0xE3, 0x42, 0xE2, 0xFE, 0x1A, 0x7F, 0x9B, |
| 0x8E, 0xE7, 0xEB, 0x4A, 0x7C, 0x0F, 0x9E, 0x16, |
| 0x2B, 0xCE, 0x33, 0x57, 0x6B, 0x31, 0x5E, 0xCE, |
| 0xCB, 0xB6, 0x40, 0x68, 0x37, 0xBF, 0x51, 0xF5}, |
| .yg_size = 32U, |
| }, |
| #endif |
| #if PKA_USE_BRAINPOOL_P256R1 |
| [PKA_BRAINPOOL_P256R1] = { |
| .p_len = 256, |
| .n_len = 256, |
| .p = (uint8_t[]){0xA9, 0xFB, 0x57, 0xDB, 0xA1, 0xEE, 0xA9, 0xBC, |
| 0x3E, 0x66, 0x0A, 0x90, 0x9D, 0x83, 0x8D, 0x72, |
| 0x6E, 0x3B, 0xF6, 0x23, 0xD5, 0x26, 0x20, 0x28, |
| 0x20, 0x13, 0x48, 0x1D, 0x1F, 0x6E, 0x53, 0x77}, |
| .n = (uint8_t[]){0xA9, 0xFB, 0x57, 0xDB, 0xA1, 0xEE, 0xA9, 0xBC, |
| 0x3E, 0x66, 0x0A, 0x90, 0x9D, 0x83, 0x8D, 0x71, |
| 0x8C, 0x39, 0x7A, 0xA3, 0xB5, 0x61, 0xA6, 0xF7, |
| 0x90, 0x1E, 0x0E, 0x82, 0x97, 0x48, 0x56, 0xA7}, |
| .a = (uint8_t[]){0x7D, 0x5A, 0x09, 0x75, 0xFC, 0x2C, 0x30, 0x57, |
| 0xEE, 0xF6, 0x75, 0x30, 0x41, 0x7A, 0xFF, 0xE7, |
| 0xFB, 0x80, 0x55, 0xC1, 0x26, 0xDC, 0x5C, 0x6C, |
| 0xE9, 0x4A, 0x4B, 0x44, 0xF3, 0x30, 0xB5, 0xD9}, |
| .a_size = 32U, |
| .xg = (uint8_t[]){0x8B, 0xD2, 0xAE, 0xB9, 0xCB, 0x7E, 0x57, 0xCB, |
| 0x2C, 0x4B, 0x48, 0x2F, 0xFC, 0x81, 0xB7, 0xAF, |
| 0xB9, 0xDE, 0x27, 0xE1, 0xE3, 0xBD, 0x23, 0xC2, |
| 0x3A, 0x44, 0x53, 0xBD, 0x9A, 0xCE, 0x32, 0x62}, |
| .xg_size = 32U, |
| .yg = (uint8_t[]){0x54, 0x7E, 0xF8, 0x35, 0xC3, 0xDA, 0xC4, 0xFD, |
| 0x97, 0xF8, 0x46, 0x1A, 0x14, 0x61, 0x1D, 0xC9, |
| 0xC2, 0x77, 0x45, 0x13, 0x2D, 0xED, 0x8E, 0x54, |
| 0x5C, 0x1D, 0x54, 0xC7, 0x2F, 0x04, 0x69, 0x97}, |
| .yg_size = 32U, |
| }, |
| #endif |
| #if PKA_USE_BRAINPOOL_P256T1 |
| [PKA_BRAINPOOL_P256T1] = { |
| .p_len = 256, |
| .n_len = 256, |
| .p = (uint8_t[]){0xA9, 0xFB, 0x57, 0xDB, 0xA1, 0xEE, 0xA9, 0xBC, |
| 0x3E, 0x66, 0x0A, 0x90, 0x9D, 0x83, 0x8D, 0x72, |
| 0x6E, 0x3B, 0xF6, 0x23, 0xD5, 0x26, 0x20, 0x28, |
| 0x20, 0x13, 0x48, 0x1D, 0x1F, 0x6E, 0x53, 0x77}, |
| .n = (uint8_t[]){0xA9, 0xFB, 0x57, 0xDB, 0xA1, 0xEE, 0xA9, 0xBC, |
| 0x3E, 0x66, 0x0A, 0x90, 0x9D, 0x83, 0x8D, 0x71, |
| 0x8C, 0x39, 0x7A, 0xA3, 0xB5, 0x61, 0xA6, 0xF7, |
| 0x90, 0x1E, 0x0E, 0x82, 0x97, 0x48, 0x56, 0xA7}, |
| .a = (uint8_t[]){0xA9, 0xFB, 0x57, 0xDB, 0xA1, 0xEE, 0xA9, 0xBC, |
| 0x3E, 0x66, 0x0A, 0x90, 0x9D, 0x83, 0x8D, 0x72, |
| 0x6E, 0x3B, 0xF6, 0x23, 0xD5, 0x26, 0x20, 0x28, |
| 0x20, 0x13, 0x48, 0x1D, 0x1F, 0x6E, 0x53, 0x74}, |
| .a_size = 32U, |
| .xg = (uint8_t[]){0xA3, 0xE8, 0xEB, 0x3C, 0xC1, 0xCF, 0xE7, 0xB7, |
| 0x73, 0x22, 0x13, 0xB2, 0x3A, 0x65, 0x61, 0x49, |
| 0xAF, 0xA1, 0x42, 0xC4, 0x7A, 0xAF, 0xBC, 0x2B, |
| 0x79, 0xA1, 0x91, 0x56, 0x2E, 0x13, 0x05, 0xF4}, |
| .xg_size = 32U, |
| .yg = (uint8_t[]){0x2D, 0x99, 0x6C, 0x82, 0x34, 0x39, 0xC5, 0x6D, |
| 0x7F, 0x7B, 0x22, 0xE1, 0x46, 0x44, 0x41, 0x7E, |
| 0x69, 0xBC, 0xB6, 0xDE, 0x39, 0xD0, 0x27, 0x00, |
| 0x1D, 0xAB, 0xE8, 0xF3, 0x5B, 0x25, 0xC9, 0xBE}, |
| .yg_size = 32U, |
| }, |
| #endif |
| #if PKA_USE_NIST_P521 |
| [PKA_NIST_P521] = { |
| .p_len = 521, |
| .n_len = 521, |
| .p = (uint8_t[]){ 0x01, 0xff, |
| 0xff, 0xff, 0xff, 0xff, 0xff, 0xff, 0xff, 0xff, |
| 0xff, 0xff, 0xff, 0xff, 0xff, 0xff, 0xff, 0xff, |
| 0xff, 0xff, 0xff, 0xff, 0xff, 0xff, 0xff, 0xff, |
| 0xff, 0xff, 0xff, 0xff, 0xff, 0xff, 0xff, 0xff, |
| 0xff, 0xff, 0xff, 0xff, 0xff, 0xff, 0xff, 0xff, |
| 0xff, 0xff, 0xff, 0xff, 0xff, 0xff, 0xff, 0xff, |
| 0xff, 0xff, 0xff, 0xff, 0xff, 0xff, 0xff, 0xff, |
| 0xff, 0xff, 0xff, 0xff, 0xff, 0xff, 0xff, 0xff}, |
| .n = (uint8_t[]){ 0x01, 0xff, |
| 0xff, 0xff, 0xff, 0xff, 0xff, 0xff, 0xff, 0xff, |
| 0xff, 0xff, 0xff, 0xff, 0xff, 0xff, 0xff, 0xff, |
| 0xff, 0xff, 0xff, 0xff, 0xff, 0xff, 0xff, 0xff, |
| 0xff, 0xff, 0xff, 0xff, 0xff, 0xff, 0xff, 0xfa, |
| 0x51, 0x86, 0x87, 0x83, 0xbf, 0x2f, 0x96, 0x6b, |
| 0x7f, 0xcc, 0x01, 0x48, 0xf7, 0x09, 0xa5, 0xd0, |
| 0x3b, 0xb5, 0xc9, 0xb8, 0x89, 0x9c, 0x47, 0xae, |
| 0xbb, 0x6f, 0xb7, 0x1e, 0x91, 0x38, 0x64, 0x09}, |
| .a_sign = 1, |
| .a = (uint8_t[]){0x03}, |
| .a_size = 1U, |
| .xg = (uint8_t[]){ 0xc6, |
| 0x85, 0x8e, 0x06, 0xb7, 0x04, 0x04, 0xe9, 0xcd, |
| 0x9e, 0x3e, 0xcb, 0x66, 0x23, 0x95, 0xb4, 0x42, |
| 0x9c, 0x64, 0x81, 0x39, 0x05, 0x3f, 0xb5, 0x21, |
| 0xf8, 0x28, 0xaf, 0x60, 0x6b, 0x4d, 0x3d, 0xba, |
| 0xa1, 0x4b, 0x5e, 0x77, 0xef, 0xe7, 0x59, 0x28, |
| 0xfe, 0x1d, 0xc1, 0x27, 0xa2, 0xff, 0xa8, 0xde, |
| 0x33, 0x48, 0xb3, 0xc1, 0x85, 0x6a, 0x42, 0x9b, |
| 0xf9, 0x7e, 0x7e, 0x31, 0xc2, 0xe5, 0xbd, 0x66}, |
| .xg_size = 65U, |
| .yg = (uint8_t[]){ 0x01, 0x18, |
| 0x39, 0x29, 0x6a, 0x78, 0x9a, 0x3b, 0xc0, 0x04, |
| 0x5c, 0x8a, 0x5f, 0xb4, 0x2c, 0x7d, 0x1b, 0xd9, |
| 0x98, 0xf5, 0x44, 0x49, 0x57, 0x9b, 0x44, 0x68, |
| 0x17, 0xaf, 0xbd, 0x17, 0x27, 0x3e, 0x66, 0x2c, |
| 0x97, 0xee, 0x72, 0x99, 0x5e, 0xf4, 0x26, 0x40, |
| 0xc5, 0x50, 0xb9, 0x01, 0x3f, 0xad, 0x07, 0x61, |
| 0x35, 0x3c, 0x70, 0x86, 0xa2, 0x72, 0xc2, 0x40, |
| 0x88, 0xbe, 0x94, 0x76, 0x9f, 0xd1, 0x66, 0x50}, |
| .yg_size = 66U, |
| }, |
| #endif |
| }; |
| |
| static struct stm32_pka_platdata pka_pdata; |
| |
| static int stm32_pka_parse_fdt(void) |
| { |
| int node; |
| struct dt_node_info info; |
| void *fdt; |
| |
| if (fdt_get_address(&fdt) == 0) { |
| return -FDT_ERR_NOTFOUND; |
| } |
| |
| node = dt_get_node(&info, -1, DT_PKA_COMPAT); |
| if (node < 0) { |
| ERROR("No PKA entry in DT\n"); |
| return -FDT_ERR_NOTFOUND; |
| } |
| |
| if (info.status == DT_DISABLED) { |
| return -FDT_ERR_NOTFOUND; |
| } |
| |
| if ((info.base == 0) || (info.clock < 0) || (info.reset < 0)) { |
| return -FDT_ERR_BADVALUE; |
| } |
| |
| pka_pdata.base = (uintptr_t)info.base; |
| pka_pdata.clock_id = (unsigned long)info.clock; |
| pka_pdata.reset_id = (unsigned int)info.reset; |
| |
| return 0; |
| } |
| |
| static int pka_wait_bit(uintptr_t base, uint32_t bit) |
| { |
| uint64_t timeout = timeout_init_us(PKA_TIMEOUT_US); |
| |
| while ((mmio_read_32(base + _PKA_SR) & bit) != bit) { |
| if (timeout_elapsed(timeout)) { |
| WARN("timeout waiting %x\n", bit); |
| return -ETIMEDOUT; |
| } |
| } |
| |
| return 0; |
| |
| } |
| |
| static void pka_disable(uintptr_t base) |
| { |
| mmio_clrbits_32(base + _PKA_CR, _PKA_CR_EN); |
| } |
| |
| static int pka_enable(uintptr_t base, uint32_t mode) |
| { |
| /* Set mode and disable interrupts */ |
| mmio_clrsetbits_32(base + _PKA_CR, _PKA_IT_MASK | _PKA_CR_MODE_MASK, |
| _PKA_CR_MODE_MASK & (mode << _PKA_CR_MODE_SHIFT)); |
| |
| mmio_setbits_32(base + _PKA_CR, _PKA_CR_EN); |
| |
| return pka_wait_bit(base, _PKA_SR_INITOK); |
| } |
| |
| /* |
| * Data are already loaded in PKA internal RAM |
| * MODE is set |
| * We start process, and wait for its end. |
| */ |
| static int stm32_pka_process(uintptr_t base) |
| { |
| mmio_setbits_32(base + _PKA_CR, _PKA_CR_START); |
| |
| return pka_wait_bit(base, _PKA_IT_PROCEND); |
| } |
| |
| /** |
| * @brief Write ECC operand to PKA RAM. |
| * @note PKA expect to write u64 word, each u64 are: the least significant bit is |
| * bit 0; the most significant bit is bit 63. |
| * We write eo_nbw (ECC operand Size) u64, value that depends of the chosen |
| * prime modulus length in bits. |
| * First less signicant u64 is written to low address |
| * Most significant u64 to higher address. |
| * And at last address we write a u64(0x0) |
| * @note This function doesn't only manage endianness (as bswap64 do), but also |
| * complete most significant incomplete u64 with 0 (if data is not a u64 |
| * multiple), and fill u64 last address with 0. |
| * @param addr: PKA_RAM address to write the buffer 'data' |
| * @param data: is a BYTE list with most significant bytes first |
| * @param data_size: nb of byte in data |
| * @param eo_nbw: is ECC Operand size in 64bits word (including the extra 0) |
| * (note it depends of the prime modulus length, not the data size) |
| * @retval 0 if OK. |
| * -EINVAL if data_size and eo_nbw are inconsistent, ie data doesn't |
| * fit in defined eo_nbw, or eo_nbw bigger than hardware limit. |
| */ |
| static int write_eo_data(uintptr_t addr, uint8_t *data, unsigned int data_size, |
| unsigned int eo_nbw) |
| { |
| uint32_t word_index; |
| int data_index; |
| |
| if ((eo_nbw < OP_NBW_FROM_SIZE(data_size)) || (eo_nbw > MAX_EO_NBW)) { |
| return -EINVAL; |
| } |
| |
| /* Fill value */ |
| data_index = (int)data_size - 1; |
| for (word_index = 0U; word_index < eo_nbw; word_index++) { |
| uint64_t tmp = 0ULL; |
| unsigned int i = 0U; /* index in the tmp U64 word */ |
| |
| /* Stop if end of tmp or end of data */ |
| while ((i < sizeof(tmp)) && (data_index >= 0)) { |
| tmp |= (uint64_t)(data[data_index]) << (UINT8_LEN * i); |
| i++; /* Move byte index in current (u64)tmp */ |
| data_index--; /* Move to just next most significat byte */ |
| } |
| |
| mmio_write_64(addr + word_index * sizeof(tmp), tmp); |
| } |
| |
| return 0; |
| } |
| |
| static unsigned int get_ecc_op_nbword(enum stm32_pka_ecdsa_curve_id cid) |
| { |
| if (cid >= ARRAY_SIZE(curve_def)) { |
| ERROR("CID %u is out of boundaries\n", cid); |
| panic(); |
| } |
| |
| return OP_NBW_FROM_LEN(curve_def[cid].n_len); |
| } |
| |
| static int stm32_pka_ecdsa_verif_configure_curve(uintptr_t base, enum stm32_pka_ecdsa_curve_id cid) |
| { |
| int ret; |
| unsigned int eo_nbw = get_ecc_op_nbword(cid); |
| |
| mmio_write_64(base + _PKA_RAM_N_LEN, curve_def[cid].n_len); |
| mmio_write_64(base + _PKA_RAM_P_LEN, curve_def[cid].p_len); |
| mmio_write_64(base + _PKA_RAM_A_SIGN, curve_def[cid].a_sign); |
| |
| ret = write_eo_data(base + _PKA_RAM_A, curve_def[cid].a, curve_def[cid].a_size, eo_nbw); |
| if (ret < 0) { |
| return ret; |
| } |
| |
| ret = write_eo_data(base + _PKA_RAM_PRIME_N, |
| curve_def[cid].n, div_round_up(curve_def[cid].n_len, UINT8_LEN), |
| eo_nbw); |
| if (ret < 0) { |
| return ret; |
| } |
| |
| ret = write_eo_data(base + _PKA_RAM_P, curve_def[cid].p, |
| div_round_up(curve_def[cid].p_len, UINT8_LEN), eo_nbw); |
| if (ret < 0) { |
| return ret; |
| } |
| |
| ret = write_eo_data(base + _PKA_RAM_XG, curve_def[cid].xg, curve_def[cid].xg_size, eo_nbw); |
| if (ret < 0) { |
| return ret; |
| } |
| |
| ret = write_eo_data(base + _PKA_RAM_YG, curve_def[cid].yg, curve_def[cid].yg_size, eo_nbw); |
| if (ret < 0) { |
| return ret; |
| } |
| |
| return 0; |
| } |
| |
| static int stm32_pka_ecdsa_verif_check_return(uintptr_t base) |
| { |
| uint64_t value; |
| uint32_t sr; |
| |
| sr = mmio_read_32(base + _PKA_SR); |
| if ((sr & (_PKA_IT_OPERR | _PKA_IT_ADDRERR | _PKA_IT_RAMERR)) != 0) { |
| WARN("Detected error(s): %s%s%s\n", |
| (sr & _PKA_IT_OPERR) ? "Operation " : "", |
| (sr & _PKA_IT_ADDRERR) ? "Address " : "", |
| (sr & _PKA_IT_RAMERR) ? "RAM" : ""); |
| return -EINVAL; |
| } |
| |
| value = mmio_read_64(base + _PKA_RAM_ECDSA_VERIFY); |
| if (value == _PKA_RAM_ECDSA_VERIFY_VALID) { |
| return 0; |
| } |
| |
| if (value == _PKA_RAM_ECDSA_VERIFY_INVALID) { |
| return -EAUTH; |
| } |
| |
| return -EINVAL; |
| } |
| |
| /** |
| * @brief Check if BigInt stored in data is 0 |
| * |
| * @param data: a BYTE array with most significant bytes first |
| * @param size: data size |
| * |
| * @retval: true: if data represents a 0 value (ie all bytes == 0) |
| * false: if data represents a non-zero value. |
| */ |
| static bool is_zero(uint8_t *data, unsigned int size) |
| { |
| unsigned int i; |
| |
| for (i = 0U; i < size; i++) { |
| if (data[i] != 0U) { |
| return false; |
| } |
| } |
| |
| return true; |
| } |
| |
| /** |
| * @brief Compare two BigInt: |
| * @param xdata_a: a BYTE array with most significant bytes first |
| * @param size_a: nb of Byte of 'a' |
| * @param data_b: a BYTE array with most significant bytes first |
| * @param size_b: nb of Byte of 'b' |
| * |
| * @retval: true if data_a < data_b |
| * false if data_a >= data_b |
| */ |
| static bool is_smaller(uint8_t *data_a, unsigned int size_a, |
| uint8_t *data_b, unsigned int size_b) |
| { |
| unsigned int i; |
| |
| i = MAX(size_a, size_b) + 1U; |
| do { |
| uint8_t a, b; |
| |
| i--; |
| if (size_a < i) { |
| a = 0U; |
| } else { |
| a = data_a[size_a - i]; |
| } |
| |
| if (size_b < i) { |
| b = 0U; |
| } else { |
| b = data_b[size_b - i]; |
| } |
| |
| if (a < b) { |
| return true; |
| } |
| |
| if (a > b) { |
| return false; |
| } |
| } while (i != 0U); |
| |
| return false; |
| } |
| |
| static int stm32_pka_ecdsa_check_param(void *sig_r_ptr, unsigned int sig_r_size, |
| void *sig_s_ptr, unsigned int sig_s_size, |
| void *pk_x_ptr, unsigned int pk_x_size, |
| void *pk_y_ptr, unsigned int pk_y_size, |
| enum stm32_pka_ecdsa_curve_id cid) |
| { |
| /* Public Key check */ |
| /* Check Xq < p */ |
| if (!is_smaller(pk_x_ptr, pk_x_size, |
| curve_def[cid].p, div_round_up(curve_def[cid].p_len, UINT8_LEN))) { |
| WARN("%s Xq < p inval\n", __func__); |
| return -EINVAL; |
| } |
| |
| /* Check Yq < p */ |
| if (!is_smaller(pk_y_ptr, pk_y_size, |
| curve_def[cid].p, div_round_up(curve_def[cid].p_len, UINT8_LEN))) { |
| WARN("%s Yq < p inval\n", __func__); |
| return -EINVAL; |
| } |
| |
| /* Signature check */ |
| /* Check 0 < r < n */ |
| if (!is_smaller(sig_r_ptr, sig_r_size, |
| curve_def[cid].n, div_round_up(curve_def[cid].n_len, UINT8_LEN)) && |
| !is_zero(sig_r_ptr, sig_r_size)) { |
| WARN("%s 0< r < n inval\n", __func__); |
| return -EINVAL; |
| } |
| |
| /* Check 0 < s < n */ |
| if (!is_smaller(sig_s_ptr, sig_s_size, |
| curve_def[cid].n, div_round_up(curve_def[cid].n_len, UINT8_LEN)) && |
| !is_zero(sig_s_ptr, sig_s_size)) { |
| WARN("%s 0< s < n inval\n", __func__); |
| return -EINVAL; |
| } |
| |
| return 0; |
| } |
| |
| /* |
| * @brief Initialize the PKA driver. |
| * @param None. |
| * @retval 0 if OK, negative value else. |
| */ |
| int stm32_pka_init(void) |
| { |
| int err; |
| #if LOG_LEVEL >= LOG_LEVEL_VERBOSE |
| uint32_t ver; |
| uint32_t id; |
| #endif |
| |
| err = stm32_pka_parse_fdt(); |
| if (err != 0) { |
| return err; |
| } |
| |
| clk_enable(pka_pdata.clock_id); |
| |
| if (stm32mp_reset_assert((unsigned long)pka_pdata.reset_id, TIMEOUT_US_1MS) != 0) { |
| panic(); |
| } |
| |
| udelay(PKA_RESET_DELAY); |
| if (stm32mp_reset_deassert((unsigned long)pka_pdata.reset_id, TIMEOUT_US_1MS) != 0) { |
| panic(); |
| } |
| |
| #if LOG_LEVEL >= LOG_LEVEL_VERBOSE |
| id = mmio_read_32(pka_pdata.base + _PKA_IPIDR); |
| ver = mmio_read_32(pka_pdata.base + _PKA_VERR); |
| |
| VERBOSE("STM32 PKA[%x] V%u.%u\n", id, |
| (ver & _PKA_VERR_MAJREV_MASK) >> _PKA_VERR_MAJREV_SHIFT, |
| (ver & _PKA_VERR_MINREV_MASK) >> _PKA_VERR_MINREV_SHIFT); |
| #endif |
| return 0; |
| } |
| |
| int stm32_pka_ecdsa_verif(void *hash, unsigned int hash_size, |
| void *sig_r_ptr, unsigned int sig_r_size, |
| void *sig_s_ptr, unsigned int sig_s_size, |
| void *pk_x_ptr, unsigned int pk_x_size, |
| void *pk_y_ptr, unsigned int pk_y_size, |
| enum stm32_pka_ecdsa_curve_id cid) |
| { |
| int ret; |
| uintptr_t base = pka_pdata.base; |
| unsigned int eo_nbw = get_ecc_op_nbword(cid); |
| |
| if ((hash == NULL) || (sig_r_ptr == NULL) || (sig_s_ptr == NULL) || |
| (pk_x_ptr == NULL) || (pk_y_ptr == NULL)) { |
| INFO("%s invalid input param\n", __func__); |
| return -EINVAL; |
| } |
| |
| ret = stm32_pka_ecdsa_check_param(sig_r_ptr, sig_r_size, |
| sig_s_ptr, sig_s_size, |
| pk_x_ptr, pk_x_size, |
| pk_y_ptr, pk_y_size, |
| cid); |
| if (ret < 0) { |
| INFO("%s check param error %d\n", __func__, ret); |
| goto out; |
| } |
| |
| if ((mmio_read_32(base + _PKA_SR) & _PKA_SR_BUSY) == _PKA_SR_BUSY) { |
| INFO("%s busy\n", __func__); |
| ret = -EBUSY; |
| goto out; |
| } |
| |
| /* Fill PKA RAM */ |
| /* With curve id values */ |
| ret = stm32_pka_ecdsa_verif_configure_curve(base, cid); |
| if (ret < 0) { |
| goto out; |
| } |
| |
| /* With pubkey */ |
| ret = write_eo_data(base + _PKA_RAM_XQ, pk_x_ptr, pk_x_size, eo_nbw); |
| if (ret < 0) { |
| goto out; |
| } |
| |
| ret = write_eo_data(base + _PKA_RAM_YQ, pk_y_ptr, pk_y_size, eo_nbw); |
| if (ret < 0) { |
| goto out; |
| } |
| |
| /* With hash */ |
| ret = write_eo_data(base + _PKA_RAM_HASH_Z, hash, hash_size, eo_nbw); |
| if (ret < 0) { |
| goto out; |
| } |
| |
| /* With signature */ |
| ret = write_eo_data(base + _PKA_RAM_SIGN_R, sig_r_ptr, sig_r_size, eo_nbw); |
| if (ret < 0) { |
| goto out; |
| } |
| |
| ret = write_eo_data(base + _PKA_RAM_SIGN_S, sig_s_ptr, sig_s_size, eo_nbw); |
| if (ret < 0) { |
| goto out; |
| } |
| |
| /* Set mode to ecdsa signature verification */ |
| ret = pka_enable(base, _PKA_CR_MODE_ECDSA_VERIF); |
| if (ret < 0) { |
| WARN("%s set mode pka error %d\n", __func__, ret); |
| goto out; |
| } |
| |
| /* Start processing and wait end */ |
| ret = stm32_pka_process(base); |
| if (ret < 0) { |
| WARN("%s process error %d\n", __func__, ret); |
| goto out; |
| } |
| |
| /* Check return status */ |
| ret = stm32_pka_ecdsa_verif_check_return(base); |
| |
| /* Unset end proc */ |
| mmio_setbits_32(base + _PKA_CLRFR, _PKA_IT_PROCEND); |
| |
| out: |
| /* Disable PKA (will stop all pending proccess and reset RAM) */ |
| pka_disable(base); |
| |
| return ret; |
| } |