drivers/marvell/comphy/phy-comphy-3700.h - filogic/atf - Gitiles

 /*
  * Copyright (C) 2018-2021 Marvell International Ltd.
  *
  * SPDX-License-Identifier:     BSD-3-Clause
  * https://spdx.org/licenses
  */

 #ifndef PHY_COMPHY_3700_H
 #define PHY_COMPHY_3700_H

 #define PLL_SET_DELAY_US			600
 #define COMPHY_PLL_TIMEOUT			1000
 #define REG_16_BIT_MASK				0xFFFF

 #define COMPHY_SELECTOR_PHY_REG			0xFC
 /* bit0: 0: Lane1 is GbE0; 1: Lane1 is PCIE */
 #define COMPHY_SELECTOR_PCIE_GBE0_SEL_BIT	BIT(0)
 /* bit4: 0: Lane0 is GbE1; 1: Lane0 is USB3 */
 #define COMPHY_SELECTOR_USB3_GBE1_SEL_BIT	BIT(4)
 /* bit8: 0: Lane0 is USB3 instead of GbE1, Lane2 is SATA; 1: Lane2 is USB3 */
 #define COMPHY_SELECTOR_USB3_PHY_SEL_BIT	BIT(8)

 /* SATA PHY register offset */
 #define SATAPHY_LANE2_REG_BASE_OFFSET		0x200

 /* USB3 PHY offset compared to SATA PHY */
 #define USB3PHY_LANE2_REG_BASE_OFFSET		0x200

 /* Comphy lane2 indirect access register offset */
 #define COMPHY_LANE2_INDIR_ADDR_OFFSET		0x0
 #define COMPHY_LANE2_INDIR_DATA_OFFSET		0x4

 /* PHY shift to get related register address */
 enum {
 	PCIE = 1,
 	USB3,
 };

 #define PCIEPHY_SHFT		2
 #define USB3PHY_SHFT		2
 #define PHY_SHFT(unit)		((unit == PCIE) ? PCIEPHY_SHFT : USB3PHY_SHFT)

 /* PHY register */
 #define COMPHY_POWER_PLL_CTRL		0x01
 #define PWR_PLL_CTRL_ADDR(unit)		(COMPHY_POWER_PLL_CTRL * PHY_SHFT(unit))
 #define PU_IVREF_BIT			BIT(15)
 #define PU_PLL_BIT			BIT(14)
 #define PU_RX_BIT			BIT(13)
 #define PU_TX_BIT			BIT(12)
 #define PU_TX_INTP_BIT			BIT(11)
 #define PU_DFE_BIT			BIT(10)
 #define RESET_DTL_RX_BIT		BIT(9)
 #define PLL_LOCK_BIT			BIT(8)
 #define REF_FREF_SEL_OFFSET		0
 #define REF_FREF_SEL_MASK		(0x1F << REF_FREF_SEL_OFFSET)
 #define REF_FREF_SEL_SERDES_25MHZ	(0x1 << REF_FREF_SEL_OFFSET)
 #define REF_FREF_SEL_SERDES_40MHZ	(0x3 << REF_FREF_SEL_OFFSET)
 #define REF_FREF_SEL_SERDES_50MHZ	(0x4 << REF_FREF_SEL_OFFSET)
 #define REF_FREF_SEL_PCIE_USB3_25MHZ	(0x2 << REF_FREF_SEL_OFFSET)
 #define REF_FREF_SEL_PCIE_USB3_40MHZ	(0x3 << REF_FREF_SEL_OFFSET)
 #define PHY_MODE_OFFSET			5
 #define PHY_MODE_MASK			(7 << PHY_MODE_OFFSET)
 #define PHY_MODE_SATA			(0x0 << PHY_MODE_OFFSET)
 #define PHY_MODE_PCIE			(0x3 << PHY_MODE_OFFSET)
 #define PHY_MODE_SGMII			(0x4 << PHY_MODE_OFFSET)
 #define PHY_MODE_USB3			(0x5 << PHY_MODE_OFFSET)

 #define COMPHY_KVCO_CAL_CTRL		0x02
 #define KVCO_CAL_CTRL_ADDR(unit)	(COMPHY_KVCO_CAL_CTRL * PHY_SHFT(unit))
 #define USE_MAX_PLL_RATE_BIT		BIT(12)
 #define SPEED_PLL_OFFSET		2
 #define SPEED_PLL_MASK			(0x3F << SPEED_PLL_OFFSET)
 #define SPEED_PLL_VALUE_16		(0x10 << SPEED_PLL_OFFSET)

 #define COMPHY_DIG_LOOPBACK_EN		0x23
 #define DIG_LOOPBACK_EN_ADDR(unit)	(COMPHY_DIG_LOOPBACK_EN * \
 					 PHY_SHFT(unit))
 #define SEL_DATA_WIDTH_OFFSET		10
 #define SEL_DATA_WIDTH_MASK		(0x3 << SEL_DATA_WIDTH_OFFSET)
 #define DATA_WIDTH_10BIT		(0x0 << SEL_DATA_WIDTH_OFFSET)
 #define DATA_WIDTH_20BIT		(0x1 << SEL_DATA_WIDTH_OFFSET)
 #define DATA_WIDTH_40BIT		(0x2 << SEL_DATA_WIDTH_OFFSET)
 #define PLL_READY_TX_BIT		BIT(4)

 #define COMPHY_SYNC_PATTERN		0x24
 #define SYNC_PATTERN_ADDR(unit)		(COMPHY_SYNC_PATTERN * PHY_SHFT(unit))
 #define TXD_INVERT_BIT			BIT(10)
 #define RXD_INVERT_BIT			BIT(11)

 #define COMPHY_SYNC_MASK_GEN		0x25
 #define PHY_GEN_MAX_OFFSET		10
 #define PHY_GEN_MAX_MASK		(3 << PHY_GEN_MAX_OFFSET)
 #define PHY_GEN_MAX_USB3_5G		(1 << PHY_GEN_MAX_OFFSET)

 #define COMPHY_ISOLATION_CTRL		0x26
 #define ISOLATION_CTRL_ADDR(unit)	(COMPHY_ISOLATION_REG * PHY_SHFT(unit))
 #define PHY_ISOLATE_MODE		BIT(15)

 #define COMPHY_GEN2_SET2		0x3e
 #define GEN2_SET2_ADDR(unit)		(COMPHY_GEN2_SET2 * PHY_SHFT(unit))
 #define GS2_TX_SSC_AMP_VALUE_20		BIT(14)
 #define GS2_TX_SSC_AMP_OFF		9
 #define GS2_TX_SSC_AMP_LEN		7
 #define GS2_TX_SSC_AMP_MASK		(((1 << GS2_TX_SSC_AMP_LEN) - 1) << \
 					 GS2_TX_SSC_AMP_OFF)
 #define GS2_VREG_RXTX_MAS_ISET_OFF	7
 #define GS2_VREG_RXTX_MAS_ISET_60U	(0 << GS2_VREG_RXTX_MAS_ISET_OFF)
 #define GS2_VREG_RXTX_MAS_ISET_80U	(1 << GS2_VREG_RXTX_MAS_ISET_OFF)
 #define GS2_VREG_RXTX_MAS_ISET_100U	(2 << GS2_VREG_RXTX_MAS_ISET_OFF)
 #define GS2_VREG_RXTX_MAS_ISET_120U	(3 << GS2_VREG_RXTX_MAS_ISET_OFF)
 #define GS2_VREG_RXTX_MAS_ISET_MASK	(BIT(7) | BIT(8))
 #define GS2_RSVD_6_0_OFF		0
 #define GS2_RSVD_6_0_LEN		7
 #define GS2_RSVD_6_0_MASK		(((1 << GS2_RSVD_6_0_LEN) - 1) << \
 					 GS2_RSVD_6_0_OFF)

 #define COMPHY_GEN3_SET2		0x3f
 #define GEN3_SET2_ADDR(unit)		(COMPHY_GEN3_SET2 * PHY_SHFT(unit))

 #define COMPHY_IDLE_SYNC_EN		0x48
 #define IDLE_SYNC_EN_ADDR(unit)		(COMPHY_IDLE_SYNC_EN * PHY_SHFT(unit))
 #define IDLE_SYNC_EN			BIT(12)
 #define IDLE_SYNC_EN_DEFAULT_VALUE	0x60

 #define COMPHY_MISC_CTRL0		0x4F
 #define MISC_CTRL0_ADDR(unit)		(COMPHY_MISC_CTRL0 * PHY_SHFT(unit))
 #define CLK100M_125M_EN			BIT(4)
 #define TXDCLK_2X_SEL			BIT(6)
 #define CLK500M_EN			BIT(7)
 #define PHY_REF_CLK_SEL			BIT(10)
 #define MISC_CTRL0_DEFAULT_VALUE	0xA00D

 #define COMPHY_MISC_CTRL1		0x73
 #define MISC_CTRL1_ADDR(unit)		(COMPHY_MISC_CTRL1 * PHY_SHFT(unit))
 #define SEL_BITS_PCIE_FORCE		BIT(15)

 #define COMPHY_GEN2_SET3		0x112
 #define GS3_FFE_CAP_SEL_MASK		0xF
 #define GS3_FFE_CAP_SEL_VALUE		0xF

 #define COMPHY_LANE_CFG0		0x180
 #define LANE_CFG0_ADDR(unit)		(COMPHY_LANE_CFG0 * PHY_SHFT(unit))
 #define PRD_TXDEEMPH0_MASK		BIT(0)
 #define PRD_TXMARGIN_MASK		(BIT(1) | BIT(2) | BIT(3))
 #define PRD_TXSWING_MASK		BIT(4)
 #define CFG_TX_ALIGN_POS_MASK		(BIT(5) | BIT(6) | BIT(7) | BIT(8))

 #define COMPHY_LANE_CFG1		0x181
 #define LANE_CFG1_ADDR(unit)		(COMPHY_LANE_CFG1 * PHY_SHFT(unit))
 #define PRD_TXDEEMPH1_MASK		BIT(15)
 #define USE_MAX_PLL_RATE_EN		BIT(9)
 #define TX_DET_RX_MODE			BIT(6)
 #define GEN2_TX_DATA_DLY_MASK		(BIT(3) | BIT(4))
 #define GEN2_TX_DATA_DLY_DEFT		(2 << 3)
 #define TX_ELEC_IDLE_MODE_EN		BIT(0)

 #define COMPHY_LANE_STAT1		0x183
 #define LANE_STAT1_ADDR(unit)		(COMPHY_LANE_STAT1 * PHY_SHFT(unit))
 #define TXDCLK_PCLK_EN				BIT(0)

 #define COMPHY_LANE_CFG4		0x188
 #define LANE_CFG4_ADDR(unit)		(COMPHY_LANE_CFG4 * PHY_SHFT(unit))
 #define SPREAD_SPECTRUM_CLK_EN		BIT(7)

 #define COMPHY_RST_CLK_CTRL		0x1C1
 #define RST_CLK_CTRL_ADDR(unit)		(COMPHY_RST_CLK_CTRL * PHY_SHFT(unit))
 #define SOFT_RESET			BIT(0)
 #define MODE_CORE_CLK_FREQ_SEL		BIT(9)
 #define MODE_PIPE_WIDTH_32		BIT(3)
 #define MODE_REFDIV_OFFSET		4
 #define MODE_REFDIV_LEN			2
 #define MODE_REFDIV_MASK		(0x3 << MODE_REFDIV_OFFSET)
 #define MODE_REFDIV_BY_4		(0x2 << MODE_REFDIV_OFFSET)

 #define COMPHY_TEST_MODE_CTRL		0x1C2
 #define TEST_MODE_CTRL_ADDR(unit)	(COMPHY_TEST_MODE_CTRL * PHY_SHFT(unit))
 #define MODE_MARGIN_OVERRIDE		BIT(2)

 #define COMPHY_CLK_SRC_LO		0x1C3
 #define CLK_SRC_LO_ADDR(unit)		(COMPHY_CLK_SRC_LO * PHY_SHFT(unit))
 #define MODE_CLK_SRC			BIT(0)
 #define BUNDLE_PERIOD_SEL		BIT(1)
 #define BUNDLE_PERIOD_SCALE_MASK	(BIT(2) | BIT(3))
 #define BUNDLE_SAMPLE_CTRL		BIT(4)
 #define PLL_READY_DLY_MASK		(BIT(5) | BIT(6) | BIT(7))
 #define CFG_SEL_20B			BIT(15)

 #define COMPHY_PWR_MGM_TIM1		0x1D0
 #define PWR_MGM_TIM1_ADDR(unit)		(COMPHY_PWR_MGM_TIM1 * PHY_SHFT(unit))
 #define CFG_PM_OSCCLK_WAIT_OFF		12
 #define CFG_PM_OSCCLK_WAIT_LEN		4
 #define CFG_PM_OSCCLK_WAIT_MASK		(((1 << CFG_PM_OSCCLK_WAIT_LEN) - 1) \
 					 << CFG_PM_OSCCLK_WAIT_OFF)
 #define CFG_PM_RXDEN_WAIT_OFF		8
 #define CFG_PM_RXDEN_WAIT_LEN		4
 #define CFG_PM_RXDEN_WAIT_MASK		(((1 << CFG_PM_RXDEN_WAIT_LEN) - 1) \
 					 << CFG_PM_RXDEN_WAIT_OFF)
 #define CFG_PM_RXDEN_WAIT_1_UNIT	(1 << CFG_PM_RXDEN_WAIT_OFF)
 #define CFG_PM_RXDLOZ_WAIT_OFF		0
 #define CFG_PM_RXDLOZ_WAIT_LEN		8
 #define CFG_PM_RXDLOZ_WAIT_MASK		(((1 << CFG_PM_RXDLOZ_WAIT_LEN) - 1) \
 					 << CFG_PM_RXDLOZ_WAIT_OFF)
 #define CFG_PM_RXDLOZ_WAIT_7_UNIT	(7 << CFG_PM_RXDLOZ_WAIT_OFF)
 #define CFG_PM_RXDLOZ_WAIT_12_UNIT	(0xC << CFG_PM_RXDLOZ_WAIT_OFF)

 /*
  * This register is not from PHY lane register space. It only exists in the
  * indirect register space, before the actual PHY lane 2 registers. So the
  * offset is absolute, not relative to SATAPHY_LANE2_REG_BASE_OFFSET.
  * It is used only for SATA PHY initialization.
  */
 #define COMPHY_RESERVED_REG		0x0E
 #define PHYCTRL_FRM_PIN_BIT		BIT(13)

 /* SGMII */
 #define COMPHY_PHY_CFG1_OFFSET(lane)	((1 - (lane)) * 0x28)
 #define PIN_PU_IVREF_BIT		BIT(1)
 #define PIN_RESET_CORE_BIT		BIT(11)
 #define PIN_RESET_COMPHY_BIT		BIT(12)
 #define PIN_PU_PLL_BIT			BIT(16)
 #define PIN_PU_RX_BIT			BIT(17)
 #define PIN_PU_TX_BIT			BIT(18)
 #define PIN_TX_IDLE_BIT			BIT(19)
 #define GEN_RX_SEL_OFFSET		22
 #define GEN_RX_SEL_MASK			(0xF << GEN_RX_SEL_OFFSET)
 #define GEN_TX_SEL_OFFSET		26
 #define GEN_TX_SEL_MASK			(0xF << GEN_TX_SEL_OFFSET)
 #define PHY_RX_INIT_BIT			BIT(30)
 #define SD_SPEED_1_25_G			0x6
 #define SD_SPEED_3_125_G		0x8

 /* COMPHY status reg:
  * lane0: USB3/GbE1 PHY Status 1
  * lane1: PCIe/GbE0 PHY Status 1
  */
 #define COMPHY_PHY_STATUS_OFFSET(lane)	(0x18 + (1 - (lane)) * 0x28)
 #define PHY_RX_INIT_DONE_BIT		BIT(0)
 #define PHY_PLL_READY_RX_BIT		BIT(2)
 #define PHY_PLL_READY_TX_BIT		BIT(3)

 #define SGMIIPHY_ADDR(off, base)	((((off) & 0x00007FF) * 2) + (base))

 #define MAX_LANE_NR			3

 /* comphy API */
 int mvebu_3700_comphy_is_pll_locked(uint8_t comphy_index, uint32_t comphy_mode);
 int mvebu_3700_comphy_power_off(uint8_t comphy_index, uint32_t comphy_mode);
 int mvebu_3700_comphy_power_on(uint8_t comphy_index, uint32_t comphy_mode);
 #endif /* PHY_COMPHY_3700_H */
	/*
	* Copyright (C) 2018-2021 Marvell International Ltd.
	*
	* SPDX-License-Identifier: BSD-3-Clause
	* https://spdx.org/licenses
	*/

	#ifndef PHY_COMPHY_3700_H
	#define PHY_COMPHY_3700_H

	#define PLL_SET_DELAY_US 600
	#define COMPHY_PLL_TIMEOUT 1000
	#define REG_16_BIT_MASK 0xFFFF

	#define COMPHY_SELECTOR_PHY_REG 0xFC
	/* bit0: 0: Lane1 is GbE0; 1: Lane1 is PCIE */
	#define COMPHY_SELECTOR_PCIE_GBE0_SEL_BIT BIT(0)
	/* bit4: 0: Lane0 is GbE1; 1: Lane0 is USB3 */
	#define COMPHY_SELECTOR_USB3_GBE1_SEL_BIT BIT(4)
	/* bit8: 0: Lane0 is USB3 instead of GbE1, Lane2 is SATA; 1: Lane2 is USB3 */
	#define COMPHY_SELECTOR_USB3_PHY_SEL_BIT BIT(8)

	/* SATA PHY register offset */
	#define SATAPHY_LANE2_REG_BASE_OFFSET 0x200

	/* USB3 PHY offset compared to SATA PHY */
	#define USB3PHY_LANE2_REG_BASE_OFFSET 0x200

	/* Comphy lane2 indirect access register offset */
	#define COMPHY_LANE2_INDIR_ADDR_OFFSET 0x0
	#define COMPHY_LANE2_INDIR_DATA_OFFSET 0x4

	/* PHY shift to get related register address */
	enum {
	PCIE = 1,
	USB3,
	};

	#define PCIEPHY_SHFT 2
	#define USB3PHY_SHFT 2
	#define PHY_SHFT(unit) ((unit == PCIE) ? PCIEPHY_SHFT : USB3PHY_SHFT)

	/* PHY register */
	#define COMPHY_POWER_PLL_CTRL 0x01
	#define PWR_PLL_CTRL_ADDR(unit) (COMPHY_POWER_PLL_CTRL * PHY_SHFT(unit))
	#define PU_IVREF_BIT BIT(15)
	#define PU_PLL_BIT BIT(14)
	#define PU_RX_BIT BIT(13)
	#define PU_TX_BIT BIT(12)
	#define PU_TX_INTP_BIT BIT(11)
	#define PU_DFE_BIT BIT(10)
	#define RESET_DTL_RX_BIT BIT(9)
	#define PLL_LOCK_BIT BIT(8)
	#define REF_FREF_SEL_OFFSET 0
	#define REF_FREF_SEL_MASK (0x1F << REF_FREF_SEL_OFFSET)
	#define REF_FREF_SEL_SERDES_25MHZ (0x1 << REF_FREF_SEL_OFFSET)
	#define REF_FREF_SEL_SERDES_40MHZ (0x3 << REF_FREF_SEL_OFFSET)
	#define REF_FREF_SEL_SERDES_50MHZ (0x4 << REF_FREF_SEL_OFFSET)
	#define REF_FREF_SEL_PCIE_USB3_25MHZ (0x2 << REF_FREF_SEL_OFFSET)
	#define REF_FREF_SEL_PCIE_USB3_40MHZ (0x3 << REF_FREF_SEL_OFFSET)
	#define PHY_MODE_OFFSET 5
	#define PHY_MODE_MASK (7 << PHY_MODE_OFFSET)
	#define PHY_MODE_SATA (0x0 << PHY_MODE_OFFSET)
	#define PHY_MODE_PCIE (0x3 << PHY_MODE_OFFSET)
	#define PHY_MODE_SGMII (0x4 << PHY_MODE_OFFSET)
	#define PHY_MODE_USB3 (0x5 << PHY_MODE_OFFSET)

	#define COMPHY_KVCO_CAL_CTRL 0x02
	#define KVCO_CAL_CTRL_ADDR(unit) (COMPHY_KVCO_CAL_CTRL * PHY_SHFT(unit))
	#define USE_MAX_PLL_RATE_BIT BIT(12)
	#define SPEED_PLL_OFFSET 2
	#define SPEED_PLL_MASK (0x3F << SPEED_PLL_OFFSET)
	#define SPEED_PLL_VALUE_16 (0x10 << SPEED_PLL_OFFSET)

	#define COMPHY_DIG_LOOPBACK_EN 0x23
	#define DIG_LOOPBACK_EN_ADDR(unit) (COMPHY_DIG_LOOPBACK_EN * \
	PHY_SHFT(unit))
	#define SEL_DATA_WIDTH_OFFSET 10
	#define SEL_DATA_WIDTH_MASK (0x3 << SEL_DATA_WIDTH_OFFSET)
	#define DATA_WIDTH_10BIT (0x0 << SEL_DATA_WIDTH_OFFSET)
	#define DATA_WIDTH_20BIT (0x1 << SEL_DATA_WIDTH_OFFSET)
	#define DATA_WIDTH_40BIT (0x2 << SEL_DATA_WIDTH_OFFSET)
	#define PLL_READY_TX_BIT BIT(4)

	#define COMPHY_SYNC_PATTERN 0x24
	#define SYNC_PATTERN_ADDR(unit) (COMPHY_SYNC_PATTERN * PHY_SHFT(unit))
	#define TXD_INVERT_BIT BIT(10)
	#define RXD_INVERT_BIT BIT(11)

	#define COMPHY_SYNC_MASK_GEN 0x25
	#define PHY_GEN_MAX_OFFSET 10
	#define PHY_GEN_MAX_MASK (3 << PHY_GEN_MAX_OFFSET)
	#define PHY_GEN_MAX_USB3_5G (1 << PHY_GEN_MAX_OFFSET)

	#define COMPHY_ISOLATION_CTRL 0x26
	#define ISOLATION_CTRL_ADDR(unit) (COMPHY_ISOLATION_REG * PHY_SHFT(unit))
	#define PHY_ISOLATE_MODE BIT(15)

	#define COMPHY_GEN2_SET2 0x3e
	#define GEN2_SET2_ADDR(unit) (COMPHY_GEN2_SET2 * PHY_SHFT(unit))
	#define GS2_TX_SSC_AMP_VALUE_20 BIT(14)
	#define GS2_TX_SSC_AMP_OFF 9
	#define GS2_TX_SSC_AMP_LEN 7
	#define GS2_TX_SSC_AMP_MASK (((1 << GS2_TX_SSC_AMP_LEN) - 1) << \
	GS2_TX_SSC_AMP_OFF)
	#define GS2_VREG_RXTX_MAS_ISET_OFF 7
	#define GS2_VREG_RXTX_MAS_ISET_60U (0 << GS2_VREG_RXTX_MAS_ISET_OFF)
	#define GS2_VREG_RXTX_MAS_ISET_80U (1 << GS2_VREG_RXTX_MAS_ISET_OFF)
	#define GS2_VREG_RXTX_MAS_ISET_100U (2 << GS2_VREG_RXTX_MAS_ISET_OFF)
	#define GS2_VREG_RXTX_MAS_ISET_120U (3 << GS2_VREG_RXTX_MAS_ISET_OFF)
	#define GS2_VREG_RXTX_MAS_ISET_MASK (BIT(7) \| BIT(8))
	#define GS2_RSVD_6_0_OFF 0
	#define GS2_RSVD_6_0_LEN 7
	#define GS2_RSVD_6_0_MASK (((1 << GS2_RSVD_6_0_LEN) - 1) << \
	GS2_RSVD_6_0_OFF)

	#define COMPHY_GEN3_SET2 0x3f
	#define GEN3_SET2_ADDR(unit) (COMPHY_GEN3_SET2 * PHY_SHFT(unit))

	#define COMPHY_IDLE_SYNC_EN 0x48
	#define IDLE_SYNC_EN_ADDR(unit) (COMPHY_IDLE_SYNC_EN * PHY_SHFT(unit))
	#define IDLE_SYNC_EN BIT(12)
	#define IDLE_SYNC_EN_DEFAULT_VALUE 0x60

	#define COMPHY_MISC_CTRL0 0x4F
	#define MISC_CTRL0_ADDR(unit) (COMPHY_MISC_CTRL0 * PHY_SHFT(unit))
	#define CLK100M_125M_EN BIT(4)
	#define TXDCLK_2X_SEL BIT(6)
	#define CLK500M_EN BIT(7)
	#define PHY_REF_CLK_SEL BIT(10)
	#define MISC_CTRL0_DEFAULT_VALUE 0xA00D

	#define COMPHY_MISC_CTRL1 0x73
	#define MISC_CTRL1_ADDR(unit) (COMPHY_MISC_CTRL1 * PHY_SHFT(unit))
	#define SEL_BITS_PCIE_FORCE BIT(15)

	#define COMPHY_GEN2_SET3 0x112
	#define GS3_FFE_CAP_SEL_MASK 0xF
	#define GS3_FFE_CAP_SEL_VALUE 0xF

	#define COMPHY_LANE_CFG0 0x180
	#define LANE_CFG0_ADDR(unit) (COMPHY_LANE_CFG0 * PHY_SHFT(unit))
	#define PRD_TXDEEMPH0_MASK BIT(0)
	#define PRD_TXMARGIN_MASK (BIT(1) \| BIT(2) \| BIT(3))
	#define PRD_TXSWING_MASK BIT(4)
	#define CFG_TX_ALIGN_POS_MASK (BIT(5) \| BIT(6) \| BIT(7) \| BIT(8))

	#define COMPHY_LANE_CFG1 0x181
	#define LANE_CFG1_ADDR(unit) (COMPHY_LANE_CFG1 * PHY_SHFT(unit))
	#define PRD_TXDEEMPH1_MASK BIT(15)
	#define USE_MAX_PLL_RATE_EN BIT(9)
	#define TX_DET_RX_MODE BIT(6)
	#define GEN2_TX_DATA_DLY_MASK (BIT(3) \| BIT(4))
	#define GEN2_TX_DATA_DLY_DEFT (2 << 3)
	#define TX_ELEC_IDLE_MODE_EN BIT(0)

	#define COMPHY_LANE_STAT1 0x183
	#define LANE_STAT1_ADDR(unit) (COMPHY_LANE_STAT1 * PHY_SHFT(unit))
	#define TXDCLK_PCLK_EN BIT(0)

	#define COMPHY_LANE_CFG4 0x188
	#define LANE_CFG4_ADDR(unit) (COMPHY_LANE_CFG4 * PHY_SHFT(unit))
	#define SPREAD_SPECTRUM_CLK_EN BIT(7)

	#define COMPHY_RST_CLK_CTRL 0x1C1
	#define RST_CLK_CTRL_ADDR(unit) (COMPHY_RST_CLK_CTRL * PHY_SHFT(unit))
	#define SOFT_RESET BIT(0)
	#define MODE_CORE_CLK_FREQ_SEL BIT(9)
	#define MODE_PIPE_WIDTH_32 BIT(3)
	#define MODE_REFDIV_OFFSET 4
	#define MODE_REFDIV_LEN 2
	#define MODE_REFDIV_MASK (0x3 << MODE_REFDIV_OFFSET)
	#define MODE_REFDIV_BY_4 (0x2 << MODE_REFDIV_OFFSET)

	#define COMPHY_TEST_MODE_CTRL 0x1C2
	#define TEST_MODE_CTRL_ADDR(unit) (COMPHY_TEST_MODE_CTRL * PHY_SHFT(unit))
	#define MODE_MARGIN_OVERRIDE BIT(2)

	#define COMPHY_CLK_SRC_LO 0x1C3
	#define CLK_SRC_LO_ADDR(unit) (COMPHY_CLK_SRC_LO * PHY_SHFT(unit))
	#define MODE_CLK_SRC BIT(0)
	#define BUNDLE_PERIOD_SEL BIT(1)
	#define BUNDLE_PERIOD_SCALE_MASK (BIT(2) \| BIT(3))
	#define BUNDLE_SAMPLE_CTRL BIT(4)
	#define PLL_READY_DLY_MASK (BIT(5) \| BIT(6) \| BIT(7))
	#define CFG_SEL_20B BIT(15)

	#define COMPHY_PWR_MGM_TIM1 0x1D0
	#define PWR_MGM_TIM1_ADDR(unit) (COMPHY_PWR_MGM_TIM1 * PHY_SHFT(unit))
	#define CFG_PM_OSCCLK_WAIT_OFF 12
	#define CFG_PM_OSCCLK_WAIT_LEN 4
	#define CFG_PM_OSCCLK_WAIT_MASK (((1 << CFG_PM_OSCCLK_WAIT_LEN) - 1) \
	<< CFG_PM_OSCCLK_WAIT_OFF)
	#define CFG_PM_RXDEN_WAIT_OFF 8
	#define CFG_PM_RXDEN_WAIT_LEN 4
	#define CFG_PM_RXDEN_WAIT_MASK (((1 << CFG_PM_RXDEN_WAIT_LEN) - 1) \
	<< CFG_PM_RXDEN_WAIT_OFF)
	#define CFG_PM_RXDEN_WAIT_1_UNIT (1 << CFG_PM_RXDEN_WAIT_OFF)
	#define CFG_PM_RXDLOZ_WAIT_OFF 0
	#define CFG_PM_RXDLOZ_WAIT_LEN 8
	#define CFG_PM_RXDLOZ_WAIT_MASK (((1 << CFG_PM_RXDLOZ_WAIT_LEN) - 1) \
	<< CFG_PM_RXDLOZ_WAIT_OFF)
	#define CFG_PM_RXDLOZ_WAIT_7_UNIT (7 << CFG_PM_RXDLOZ_WAIT_OFF)
	#define CFG_PM_RXDLOZ_WAIT_12_UNIT (0xC << CFG_PM_RXDLOZ_WAIT_OFF)

	/*
	* This register is not from PHY lane register space. It only exists in the
	* indirect register space, before the actual PHY lane 2 registers. So the
	* offset is absolute, not relative to SATAPHY_LANE2_REG_BASE_OFFSET.
	* It is used only for SATA PHY initialization.
	*/
	#define COMPHY_RESERVED_REG 0x0E
	#define PHYCTRL_FRM_PIN_BIT BIT(13)

	/* SGMII */
	#define COMPHY_PHY_CFG1_OFFSET(lane) ((1 - (lane)) * 0x28)
	#define PIN_PU_IVREF_BIT BIT(1)
	#define PIN_RESET_CORE_BIT BIT(11)
	#define PIN_RESET_COMPHY_BIT BIT(12)
	#define PIN_PU_PLL_BIT BIT(16)
	#define PIN_PU_RX_BIT BIT(17)
	#define PIN_PU_TX_BIT BIT(18)
	#define PIN_TX_IDLE_BIT BIT(19)
	#define GEN_RX_SEL_OFFSET 22
	#define GEN_RX_SEL_MASK (0xF << GEN_RX_SEL_OFFSET)
	#define GEN_TX_SEL_OFFSET 26
	#define GEN_TX_SEL_MASK (0xF << GEN_TX_SEL_OFFSET)
	#define PHY_RX_INIT_BIT BIT(30)
	#define SD_SPEED_1_25_G 0x6
	#define SD_SPEED_3_125_G 0x8

	/* COMPHY status reg:
	* lane0: USB3/GbE1 PHY Status 1
	* lane1: PCIe/GbE0 PHY Status 1
	*/
	#define COMPHY_PHY_STATUS_OFFSET(lane) (0x18 + (1 - (lane)) * 0x28)
	#define PHY_RX_INIT_DONE_BIT BIT(0)
	#define PHY_PLL_READY_RX_BIT BIT(2)
	#define PHY_PLL_READY_TX_BIT BIT(3)

	#define SGMIIPHY_ADDR(off, base) ((((off) & 0x00007FF) * 2) + (base))

	#define MAX_LANE_NR 3

	/* comphy API */
	int mvebu_3700_comphy_is_pll_locked(uint8_t comphy_index, uint32_t comphy_mode);
	int mvebu_3700_comphy_power_off(uint8_t comphy_index, uint32_t comphy_mode);
	int mvebu_3700_comphy_power_on(uint8_t comphy_index, uint32_t comphy_mode);
	#endif /* PHY_COMPHY_3700_H */