blob: ebf92f7245436c2adbea2585981ba6caf88e962f [file] [log] [blame]
/*
* Copyright (c) 2018-2023, ARM Limited and Contributors. All rights reserved.
*
* SPDX-License-Identifier: BSD-3-Clause
*/
#include <stdlib.h>
#include <stdint.h>
#include <stdbool.h>
#include <arch_helpers.h>
#include <common/debug.h>
#include <drivers/delay_timer.h>
#include <lib/mmio.h>
#include <lib/psci/psci.h>
#include <lib/smccc.h>
#include <lib/spinlock.h>
#include <plat/common/platform.h>
#include <services/std_svc.h>
#include <gpc.h>
#include <platform_def.h>
#define FSL_SIP_CONFIG_GPC_MASK U(0x00)
#define FSL_SIP_CONFIG_GPC_UNMASK U(0x01)
#define FSL_SIP_CONFIG_GPC_SET_WAKE U(0x02)
#define FSL_SIP_CONFIG_GPC_PM_DOMAIN U(0x03)
#define FSL_SIP_CONFIG_GPC_SET_AFF U(0x04)
#define FSL_SIP_CONFIG_GPC_CORE_WAKE U(0x05)
#define MAX_HW_IRQ_NUM U(128)
#define MAX_IMR_NUM U(4)
static uint32_t gpc_saved_imrs[16];
static uint32_t gpc_wake_irqs[4];
static uint32_t gpc_imr_offset[] = {
IMX_GPC_BASE + IMR1_CORE0_A53,
IMX_GPC_BASE + IMR1_CORE1_A53,
IMX_GPC_BASE + IMR1_CORE2_A53,
IMX_GPC_BASE + IMR1_CORE3_A53,
IMX_GPC_BASE + IMR1_CORE0_M4,
};
spinlock_t gpc_imr_lock[4];
static void gpc_imr_core_spin_lock(unsigned int core_id)
{
spin_lock(&gpc_imr_lock[core_id]);
}
static void gpc_imr_core_spin_unlock(unsigned int core_id)
{
spin_unlock(&gpc_imr_lock[core_id]);
}
static void gpc_save_imr_lpm(unsigned int core_id, unsigned int imr_idx)
{
uint32_t reg = gpc_imr_offset[core_id] + imr_idx * 4;
gpc_imr_core_spin_lock(core_id);
gpc_saved_imrs[core_id + imr_idx * 4] = mmio_read_32(reg);
mmio_write_32(reg, ~gpc_wake_irqs[imr_idx]);
gpc_imr_core_spin_unlock(core_id);
}
static void gpc_restore_imr_lpm(unsigned int core_id, unsigned int imr_idx)
{
uint32_t reg = gpc_imr_offset[core_id] + imr_idx * 4;
uint32_t val = gpc_saved_imrs[core_id + imr_idx * 4];
gpc_imr_core_spin_lock(core_id);
mmio_write_32(reg, val);
gpc_imr_core_spin_unlock(core_id);
}
/*
* On i.MX8MQ, only in system suspend mode, the A53 cluster can
* enter LPM mode and shutdown the A53 PLAT power domain. So LPM
* wakeup only used for system suspend. when system enter suspend,
* any A53 CORE can be the last core to suspend the system, But
* the LPM wakeup can only use the C0's IMR to wakeup A53 cluster
* from LPM, so save C0's IMRs before suspend, restore back after
* resume.
*/
void imx_set_sys_wakeup(unsigned int last_core, bool pdn)
{
unsigned int imr, core;
if (pdn) {
for (imr = 0U; imr < MAX_IMR_NUM; imr++) {
for (core = 0U; core < PLATFORM_CORE_COUNT; core++) {
gpc_save_imr_lpm(core, imr);
}
}
} else {
for (imr = 0U; imr < MAX_IMR_NUM; imr++) {
for (core = 0U; core < PLATFORM_CORE_COUNT; core++) {
gpc_restore_imr_lpm(core, imr);
}
}
}
}
static void imx_gpc_hwirq_mask(unsigned int hwirq)
{
uintptr_t reg;
unsigned int val;
if (hwirq >= MAX_HW_IRQ_NUM) {
return;
}
gpc_imr_core_spin_lock(0);
reg = gpc_imr_offset[0] + (hwirq / 32) * 4;
val = mmio_read_32(reg);
val |= 1 << hwirq % 32;
mmio_write_32(reg, val);
gpc_imr_core_spin_unlock(0);
}
static void imx_gpc_hwirq_unmask(unsigned int hwirq)
{
uintptr_t reg;
unsigned int val;
if (hwirq >= MAX_HW_IRQ_NUM) {
return;
}
gpc_imr_core_spin_lock(0);
reg = gpc_imr_offset[0] + (hwirq / 32) * 4;
val = mmio_read_32(reg);
val &= ~(1 << hwirq % 32);
mmio_write_32(reg, val);
gpc_imr_core_spin_unlock(0);
}
static void imx_gpc_set_wake(uint32_t hwirq, bool on)
{
uint32_t mask, idx;
if (hwirq >= MAX_HW_IRQ_NUM) {
return;
}
mask = 1 << hwirq % 32;
idx = hwirq / 32;
gpc_wake_irqs[idx] = on ? gpc_wake_irqs[idx] | mask :
gpc_wake_irqs[idx] & ~mask;
}
static void imx_gpc_mask_irq0(uint32_t core_id, uint32_t mask)
{
gpc_imr_core_spin_lock(core_id);
if (mask) {
mmio_setbits_32(gpc_imr_offset[core_id], 1);
} else {
mmio_clrbits_32(gpc_imr_offset[core_id], 1);
}
dsb();
gpc_imr_core_spin_unlock(core_id);
}
void imx_gpc_core_wake(uint32_t cpumask)
{
for (int i = 0; i < PLATFORM_CORE_COUNT; i++) {
if (cpumask & (1 << i)) {
imx_gpc_mask_irq0(i, false);
}
}
}
void imx_gpc_set_a53_core_awake(uint32_t core_id)
{
imx_gpc_mask_irq0(core_id, true);
}
static void imx_gpc_set_affinity(uint32_t hwirq, unsigned int cpu_idx)
{
uintptr_t reg;
unsigned int val;
if (hwirq >= MAX_HW_IRQ_NUM || cpu_idx >= 4) {
return;
}
/*
* using the mask/unmask bit as affinity function.unmask the
* IMR bit to enable IRQ wakeup for this core.
*/
gpc_imr_core_spin_lock(cpu_idx);
reg = gpc_imr_offset[cpu_idx] + (hwirq / 32) * 4;
val = mmio_read_32(reg);
val &= ~(1 << hwirq % 32);
mmio_write_32(reg, val);
gpc_imr_core_spin_unlock(cpu_idx);
/* clear affinity of other core */
for (int i = 0; i < PLATFORM_CORE_COUNT; i++) {
if (cpu_idx != i) {
gpc_imr_core_spin_lock(i);
reg = gpc_imr_offset[i] + (hwirq / 32) * 4;
val = mmio_read_32(reg);
val |= (1 << hwirq % 32);
mmio_write_32(reg, val);
gpc_imr_core_spin_unlock(i);
}
}
}
/* use wfi power down the core */
void imx_set_cpu_pwr_off(unsigned int core_id)
{
bakery_lock_get(&gpc_lock);
/* enable the wfi power down of the core */
mmio_setbits_32(IMX_GPC_BASE + LPCR_A53_AD, COREx_WFI_PDN(core_id) |
(1 << (core_id + 20)));
bakery_lock_release(&gpc_lock);
/* assert the pcg pcr bit of the core */
mmio_setbits_32(IMX_GPC_BASE + COREx_PGC_PCR(core_id), 0x1);
};
/* if out of lpm, we need to do reverse steps */
void imx_set_cpu_lpm(unsigned int core_id, bool pdn)
{
bakery_lock_get(&gpc_lock);
if (pdn) {
/* enable the core WFI PDN & IRQ PUP */
mmio_setbits_32(IMX_GPC_BASE + LPCR_A53_AD, COREx_WFI_PDN(core_id) |
(1 << (core_id + 20)) | COREx_IRQ_WUP(core_id));
/* assert the pcg pcr bit of the core */
mmio_setbits_32(IMX_GPC_BASE + COREx_PGC_PCR(core_id), 0x1);
} else {
/* disable CORE WFI PDN & IRQ PUP */
mmio_clrbits_32(IMX_GPC_BASE + LPCR_A53_AD, COREx_WFI_PDN(core_id) |
COREx_IRQ_WUP(core_id));
/* deassert the pcg pcr bit of the core */
mmio_setbits_32(IMX_GPC_BASE + COREx_PGC_PCR(core_id), 0x1);
}
bakery_lock_release(&gpc_lock);
}
void imx_pup_pdn_slot_config(int last_core, bool pdn)
{
if (pdn) {
/* SLOT0 for A53 PLAT power down */
mmio_setbits_32(IMX_GPC_BASE + SLTx_CFG(0), SLT_PLAT_PDN);
/* SLOT1 for A53 PLAT power up */
mmio_setbits_32(IMX_GPC_BASE + SLTx_CFG(1), SLT_PLAT_PUP);
/* SLOT2 for A53 primary core power up */
mmio_setbits_32(IMX_GPC_BASE + SLTx_CFG(2), SLT_COREx_PUP(last_core));
/* ACK setting: PLAT ACK for PDN, CORE ACK for PUP */
mmio_clrsetbits_32(IMX_GPC_BASE + PGC_ACK_SEL_A53, 0xFFFFFFFF,
A53_PLAT_PDN_ACK | SLT_COREx_PUP_ACK(last_core));
} else {
mmio_clrbits_32(IMX_GPC_BASE + SLTx_CFG(0), 0xFFFFFFFF);
mmio_clrbits_32(IMX_GPC_BASE + SLTx_CFG(1), 0xFFFFFFFF);
mmio_clrbits_32(IMX_GPC_BASE + SLTx_CFG(2), 0xFFFFFFFF);
mmio_clrsetbits_32(IMX_GPC_BASE + PGC_ACK_SEL_A53, 0xFFFFFFFF,
A53_DUMMY_PDN_ACK | A53_DUMMY_PUP_ACK);
}
}
void imx_set_cluster_powerdown(unsigned int last_core, uint8_t power_state)
{
uint32_t val;
if (is_local_state_off(power_state)) {
val = mmio_read_32(IMX_GPC_BASE + LPCR_A53_BSC);
val |= A53_LPM_STOP; /* enable C0-C1's STOP mode */
val &= ~CPU_CLOCK_ON_LPM; /* disable CPU clock in LPM mode */
mmio_write_32(IMX_GPC_BASE + LPCR_A53_BSC, val);
/* enable C2-3's STOP mode */
mmio_setbits_32(IMX_GPC_BASE + LPCR_A53_BSC2, A53_LPM_STOP);
/* enable PLAT/SCU power down */
val = mmio_read_32(IMX_GPC_BASE + LPCR_A53_AD);
val &= ~EN_L2_WFI_PDN;
val |= L2PGE | EN_PLAT_PDN;
val &= ~COREx_IRQ_WUP(last_core); /* disable IRQ PUP for last core */
val |= COREx_LPM_PUP(last_core); /* enable LPM PUP for last core */
mmio_write_32(IMX_GPC_BASE + LPCR_A53_AD, val);
imx_pup_pdn_slot_config(last_core, true);
/* enable PLAT PGC */
mmio_setbits_32(IMX_GPC_BASE + A53_PLAT_PGC, 0x1);
} else {
/* clear PLAT PGC */
mmio_clrbits_32(IMX_GPC_BASE + A53_PLAT_PGC, 0x1);
/* clear the slot and ack for cluster power down */
imx_pup_pdn_slot_config(last_core, false);
val = mmio_read_32(IMX_GPC_BASE + LPCR_A53_BSC);
val &= ~A53_LPM_MASK; /* clear the C0~1 LPM */
val |= CPU_CLOCK_ON_LPM; /* disable cpu clock in LPM */
mmio_write_32(IMX_GPC_BASE + LPCR_A53_BSC, val);
/* set A53 LPM to RUN mode */
mmio_clrbits_32(IMX_GPC_BASE + LPCR_A53_BSC2, A53_LPM_MASK);
/* clear PLAT/SCU power down */
val = mmio_read_32(IMX_GPC_BASE + LPCR_A53_AD);
val |= EN_L2_WFI_PDN;
val &= ~(L2PGE | EN_PLAT_PDN);
val &= ~COREx_LPM_PUP(last_core); /* disable C0's LPM PUP */
mmio_write_32(IMX_GPC_BASE + LPCR_A53_AD, val);
}
}
#define MAX_PLL_NUM U(12)
static const struct pll_override imx8mq_pll[MAX_PLL_NUM] = {
{.reg = 0x0, .override_mask = 0x140000, },
{.reg = 0x8, .override_mask = 0x140000, },
{.reg = 0x10, .override_mask = 0x140000, },
{.reg = 0x18, .override_mask = 0x140000, },
{.reg = 0x20, .override_mask = 0x140000, },
{.reg = 0x28, .override_mask = 0x140000, },
{.reg = 0x30, .override_mask = 0x1555540, },
{.reg = 0x3c, .override_mask = 0x1555540, },
{.reg = 0x48, .override_mask = 0x140, },
{.reg = 0x54, .override_mask = 0x140, },
{.reg = 0x60, .override_mask = 0x140, },
{.reg = 0x70, .override_mask = 0xa, },
};
void imx_anamix_override(bool enter)
{
unsigned int i;
/* enable the pll override bit before entering DSM mode */
for (i = 0; i < MAX_PLL_NUM; i++) {
if (enter) {
mmio_setbits_32(IMX_ANAMIX_BASE + imx8mq_pll[i].reg,
imx8mq_pll[i].override_mask);
} else {
mmio_clrbits_32(IMX_ANAMIX_BASE + imx8mq_pll[i].reg,
imx8mq_pll[i].override_mask);
}
}
}
int imx_gpc_handler(uint32_t smc_fid,
u_register_t x1,
u_register_t x2,
u_register_t x3)
{
switch (x1) {
case FSL_SIP_CONFIG_GPC_CORE_WAKE:
imx_gpc_core_wake(x2);
break;
case FSL_SIP_CONFIG_GPC_SET_WAKE:
imx_gpc_set_wake(x2, x3);
break;
case FSL_SIP_CONFIG_GPC_MASK:
imx_gpc_hwirq_mask(x2);
break;
case FSL_SIP_CONFIG_GPC_UNMASK:
imx_gpc_hwirq_unmask(x2);
break;
case FSL_SIP_CONFIG_GPC_SET_AFF:
imx_gpc_set_affinity(x2, x3);
break;
default:
return SMC_UNK;
}
return 0;
}
void imx_gpc_init(void)
{
uint32_t val;
unsigned int i, j;
/* mask all the interrupt by default */
for (i = 0U; i < PLATFORM_CORE_COUNT; i++) {
for (j = 0U; j < ARRAY_SIZE(gpc_imr_offset); j++) {
mmio_write_32(gpc_imr_offset[j] + i * 4, ~0x0);
}
}
/* Due to the hardware design requirement, need to make
* sure GPR interrupt(#32) is unmasked during RUN mode to
* avoid entering DSM mode by mistake.
*/
for (i = 0U; i < PLATFORM_CORE_COUNT; i++) {
mmio_write_32(gpc_imr_offset[i], ~0x1);
}
/* leave the IOMUX_GPC bit 12 on for core wakeup */
mmio_setbits_32(IMX_IOMUX_GPR_BASE + 0x4, 1 << 12);
/* use external IRQs to wakeup C0~C3 from LPM */
val = mmio_read_32(IMX_GPC_BASE + LPCR_A53_BSC);
val |= IRQ_SRC_A53_WUP;
/* clear the MASTER0 LPM handshake */
val &= ~MASTER0_LPM_HSK;
mmio_write_32(IMX_GPC_BASE + LPCR_A53_BSC, val);
/* mask M4 DSM trigger if M4 is NOT enabled */
mmio_setbits_32(IMX_GPC_BASE + LPCR_M4, DSM_MODE_MASK);
/* set all mix/PU in A53 domain */
mmio_write_32(IMX_GPC_BASE + PGC_CPU_0_1_MAPPING, 0xfffd);
/* set SCU timing */
mmio_write_32(IMX_GPC_BASE + PGC_SCU_TIMING,
(0x59 << 10) | 0x5B | (0x2 << 20));
/* set DUMMY PDN/PUP ACK by default for A53 domain */
mmio_write_32(IMX_GPC_BASE + PGC_ACK_SEL_A53, A53_DUMMY_PUP_ACK |
A53_DUMMY_PDN_ACK);
/* disable DSM mode by default */
mmio_clrbits_32(IMX_GPC_BASE + SLPCR, DSM_MODE_MASK);
/*
* USB PHY power up needs to make sure RESET bit in SRC is clear,
* otherwise, the PU power up bit in GPC will NOT self-cleared.
* only need to do it once.
*/
mmio_clrbits_32(IMX_SRC_BASE + SRC_OTG1PHY_SCR, 0x1);
mmio_clrbits_32(IMX_SRC_BASE + SRC_OTG2PHY_SCR, 0x1);
/*
* for USB OTG, the limitation are:
* 1. before system clock config, the IPG clock run at 12.5MHz, delay time
* should be longer than 82us.
* 2. after system clock config, ipg clock run at 66.5MHz, delay time
* be longer that 15.3 us.
* Add 100us to make sure the USB OTG SRC is clear safely.
*/
udelay(100);
}