blob: 421669fc197eb48067a7ff19f91cdcd35a090b77 [file] [log] [blame]
/*
* Copyright (c) 2015-2018, ARM Limited and Contributors. All rights reserved.
*
* SPDX-License-Identifier: BSD-3-Clause
*/
#include <arch.h>
#include <arch_helpers.h>
#include <assert.h>
#include <debug.h>
#include <gic_common.h>
#include <gicv2.h>
#include <interrupt_props.h>
#include "../common/gic_common_private.h"
#include "gicv2_private.h"
/*
* Accessor to read the GIC Distributor ITARGETSR corresponding to the
* interrupt `id`, 4 interrupt IDs at a time.
*/
unsigned int gicd_read_itargetsr(uintptr_t base, unsigned int id)
{
unsigned n = id >> ITARGETSR_SHIFT;
return mmio_read_32(base + GICD_ITARGETSR + (n << 2));
}
/*
* Accessor to read the GIC Distributor CPENDSGIR corresponding to the
* interrupt `id`, 4 interrupt IDs at a time.
*/
unsigned int gicd_read_cpendsgir(uintptr_t base, unsigned int id)
{
unsigned n = id >> CPENDSGIR_SHIFT;
return mmio_read_32(base + GICD_CPENDSGIR + (n << 2));
}
/*
* Accessor to read the GIC Distributor SPENDSGIR corresponding to the
* interrupt `id`, 4 interrupt IDs at a time.
*/
unsigned int gicd_read_spendsgir(uintptr_t base, unsigned int id)
{
unsigned n = id >> SPENDSGIR_SHIFT;
return mmio_read_32(base + GICD_SPENDSGIR + (n << 2));
}
/*
* Accessor to write the GIC Distributor ITARGETSR corresponding to the
* interrupt `id`, 4 interrupt IDs at a time.
*/
void gicd_write_itargetsr(uintptr_t base, unsigned int id, unsigned int val)
{
unsigned n = id >> ITARGETSR_SHIFT;
mmio_write_32(base + GICD_ITARGETSR + (n << 2), val);
}
/*
* Accessor to write the GIC Distributor CPENDSGIR corresponding to the
* interrupt `id`, 4 interrupt IDs at a time.
*/
void gicd_write_cpendsgir(uintptr_t base, unsigned int id, unsigned int val)
{
unsigned n = id >> CPENDSGIR_SHIFT;
mmio_write_32(base + GICD_CPENDSGIR + (n << 2), val);
}
/*
* Accessor to write the GIC Distributor SPENDSGIR corresponding to the
* interrupt `id`, 4 interrupt IDs at a time.
*/
void gicd_write_spendsgir(uintptr_t base, unsigned int id, unsigned int val)
{
unsigned n = id >> SPENDSGIR_SHIFT;
mmio_write_32(base + GICD_SPENDSGIR + (n << 2), val);
}
/*******************************************************************************
* Get the current CPU bit mask from GICD_ITARGETSR0
******************************************************************************/
unsigned int gicv2_get_cpuif_id(uintptr_t base)
{
unsigned int val;
val = gicd_read_itargetsr(base, 0);
return val & GIC_TARGET_CPU_MASK;
}
/*******************************************************************************
* Helper function to configure the default attributes of SPIs.
******************************************************************************/
void gicv2_spis_configure_defaults(uintptr_t gicd_base)
{
unsigned int index, num_ints;
num_ints = gicd_read_typer(gicd_base);
num_ints &= TYPER_IT_LINES_NO_MASK;
num_ints = (num_ints + 1) << 5;
/*
* Treat all SPIs as G1NS by default. The number of interrupts is
* calculated as 32 * (IT_LINES + 1). We do 32 at a time.
*/
for (index = MIN_SPI_ID; index < num_ints; index += 32)
gicd_write_igroupr(gicd_base, index, ~0U);
/* Setup the default SPI priorities doing four at a time */
for (index = MIN_SPI_ID; index < num_ints; index += 4)
gicd_write_ipriorityr(gicd_base,
index,
GICD_IPRIORITYR_DEF_VAL);
/* Treat all SPIs as level triggered by default, 16 at a time */
for (index = MIN_SPI_ID; index < num_ints; index += 16)
gicd_write_icfgr(gicd_base, index, 0);
}
#if !ERROR_DEPRECATED
/*******************************************************************************
* Helper function to configure secure G0 SPIs.
******************************************************************************/
void gicv2_secure_spis_configure(uintptr_t gicd_base,
unsigned int num_ints,
const unsigned int *sec_intr_list)
{
unsigned int index, irq_num;
/* If `num_ints` is not 0, ensure that `sec_intr_list` is not NULL */
assert(num_ints ? (uintptr_t)sec_intr_list : 1);
for (index = 0; index < num_ints; index++) {
irq_num = sec_intr_list[index];
if (irq_num >= MIN_SPI_ID) {
/* Configure this interrupt as a secure interrupt */
gicd_clr_igroupr(gicd_base, irq_num);
/* Set the priority of this interrupt */
gicd_set_ipriorityr(gicd_base,
irq_num,
GIC_HIGHEST_SEC_PRIORITY);
/* Target the secure interrupts to primary CPU */
gicd_set_itargetsr(gicd_base, irq_num,
gicv2_get_cpuif_id(gicd_base));
/* Enable this interrupt */
gicd_set_isenabler(gicd_base, irq_num);
}
}
}
#endif
/*******************************************************************************
* Helper function to configure properties of secure G0 SPIs.
******************************************************************************/
void gicv2_secure_spis_configure_props(uintptr_t gicd_base,
const interrupt_prop_t *interrupt_props,
unsigned int interrupt_props_num)
{
unsigned int i;
const interrupt_prop_t *prop_desc;
/* Make sure there's a valid property array */
assert(interrupt_props_num != 0 ? (uintptr_t) interrupt_props : 1);
for (i = 0; i < interrupt_props_num; i++) {
prop_desc = &interrupt_props[i];
if (prop_desc->intr_num < MIN_SPI_ID)
continue;
/* Configure this interrupt as a secure interrupt */
assert(prop_desc->intr_grp == GICV2_INTR_GROUP0);
gicd_clr_igroupr(gicd_base, prop_desc->intr_num);
/* Set the priority of this interrupt */
gicd_set_ipriorityr(gicd_base, prop_desc->intr_num,
prop_desc->intr_pri);
/* Target the secure interrupts to primary CPU */
gicd_set_itargetsr(gicd_base, prop_desc->intr_num,
gicv2_get_cpuif_id(gicd_base));
/* Set interrupt configuration */
gicd_set_icfgr(gicd_base, prop_desc->intr_num,
prop_desc->intr_cfg);
/* Enable this interrupt */
gicd_set_isenabler(gicd_base, prop_desc->intr_num);
}
}
#if !ERROR_DEPRECATED
/*******************************************************************************
* Helper function to configure secure G0 SGIs and PPIs.
******************************************************************************/
void gicv2_secure_ppi_sgi_setup(uintptr_t gicd_base,
unsigned int num_ints,
const unsigned int *sec_intr_list)
{
unsigned int index, irq_num, sec_ppi_sgi_mask = 0;
/* If `num_ints` is not 0, ensure that `sec_intr_list` is not NULL */
assert(num_ints ? (uintptr_t)sec_intr_list : 1);
/*
* Disable all SGIs (imp. def.)/PPIs before configuring them. This is a
* more scalable approach as it avoids clearing the enable bits in the
* GICD_CTLR.
*/
gicd_write_icenabler(gicd_base, 0, ~0);
/* Setup the default PPI/SGI priorities doing four at a time */
for (index = 0; index < MIN_SPI_ID; index += 4)
gicd_write_ipriorityr(gicd_base,
index,
GICD_IPRIORITYR_DEF_VAL);
for (index = 0; index < num_ints; index++) {
irq_num = sec_intr_list[index];
if (irq_num < MIN_SPI_ID) {
/* We have an SGI or a PPI. They are Group0 at reset */
sec_ppi_sgi_mask |= 1U << irq_num;
/* Set the priority of this interrupt */
gicd_set_ipriorityr(gicd_base,
irq_num,
GIC_HIGHEST_SEC_PRIORITY);
}
}
/*
* Invert the bitmask to create a mask for non-secure PPIs and
* SGIs. Program the GICD_IGROUPR0 with this bit mask.
*/
gicd_write_igroupr(gicd_base, 0, ~sec_ppi_sgi_mask);
/* Enable the Group 0 SGIs and PPIs */
gicd_write_isenabler(gicd_base, 0, sec_ppi_sgi_mask);
}
#endif
/*******************************************************************************
* Helper function to configure properties of secure G0 SGIs and PPIs.
******************************************************************************/
void gicv2_secure_ppi_sgi_setup_props(uintptr_t gicd_base,
const interrupt_prop_t *interrupt_props,
unsigned int interrupt_props_num)
{
unsigned int i;
uint32_t sec_ppi_sgi_mask = 0;
const interrupt_prop_t *prop_desc;
/* Make sure there's a valid property array */
assert(interrupt_props_num != 0 ? (uintptr_t) interrupt_props : 1);
/*
* Disable all SGIs (imp. def.)/PPIs before configuring them. This is a
* more scalable approach as it avoids clearing the enable bits in the
* GICD_CTLR.
*/
gicd_write_icenabler(gicd_base, 0, ~0);
/* Setup the default PPI/SGI priorities doing four at a time */
for (i = 0; i < MIN_SPI_ID; i += 4)
gicd_write_ipriorityr(gicd_base, i, GICD_IPRIORITYR_DEF_VAL);
for (i = 0; i < interrupt_props_num; i++) {
prop_desc = &interrupt_props[i];
if (prop_desc->intr_num >= MIN_SPI_ID)
continue;
/* Configure this interrupt as a secure interrupt */
assert(prop_desc->intr_grp == GICV2_INTR_GROUP0);
/*
* Set interrupt configuration for PPIs. Configuration for SGIs
* are ignored.
*/
if ((prop_desc->intr_num >= MIN_PPI_ID) &&
(prop_desc->intr_num < MIN_SPI_ID)) {
gicd_set_icfgr(gicd_base, prop_desc->intr_num,
prop_desc->intr_cfg);
}
/* We have an SGI or a PPI. They are Group0 at reset */
sec_ppi_sgi_mask |= (1u << prop_desc->intr_num);
/* Set the priority of this interrupt */
gicd_set_ipriorityr(gicd_base, prop_desc->intr_num,
prop_desc->intr_pri);
}
/*
* Invert the bitmask to create a mask for non-secure PPIs and SGIs.
* Program the GICD_IGROUPR0 with this bit mask.
*/
gicd_write_igroupr(gicd_base, 0, ~sec_ppi_sgi_mask);
/* Enable the Group 0 SGIs and PPIs */
gicd_write_isenabler(gicd_base, 0, sec_ppi_sgi_mask);
}