blob: 2c0ed92a3cc948bb4d281d3c9c8837cec4d1d75c [file] [log] [blame]
#
# Copyright (c) 2017-2020, ARM Limited and Contributors. All rights reserved.
#
# SPDX-License-Identifier: BSD-3-Clause
#
override BL2_AT_EL3 := 1
override COLD_BOOT_SINGLE_CPU := 1
override PROGRAMMABLE_RESET_ADDRESS := 1
override USE_COHERENT_MEM := 1
override ENABLE_SVE_FOR_NS := 0
# Disabling ENABLE_PIE saves memory footprint a lot, but you need to adjust
# UNIPHIER_MEM_BASE so that all TF images are loaded at their link addresses.
override ENABLE_PIE := 1
ALLOW_RO_XLAT_TABLES := 1
ifeq ($(ALLOW_RO_XLAT_TABLES),1)
BL31_CPPFLAGS += -DPLAT_RO_XLAT_TABLES
BL32_CPPFLAGS += -DPLAT_RO_XLAT_TABLES
endif
# The dynamic xlat table is only used in BL2
BL2_CPPFLAGS += -DPLAT_XLAT_TABLES_DYNAMIC
# Cortex-A53 revision r0p4-51rel0
# needed for LD20, unneeded for LD11, PXs3 (no ACE)
ERRATA_A53_855873 := 1
FIP_ALIGN := 512
ifeq ($(NEED_BL32),yes)
$(eval $(call add_define,UNIPHIER_LOAD_BL32))
endif
# Libraries
include lib/xlat_tables_v2/xlat_tables.mk
PLAT_PATH := plat/socionext/uniphier
PLAT_INCLUDES := -I$(PLAT_PATH)/include
# common sources for BL2, BL31 (and BL32 if SPD=tspd)
PLAT_BL_COMMON_SOURCES += plat/common/aarch64/crash_console_helpers.S \
$(PLAT_PATH)/uniphier_console.S \
$(PLAT_PATH)/uniphier_console_setup.c \
$(PLAT_PATH)/uniphier_helpers.S \
$(PLAT_PATH)/uniphier_soc_info.c \
$(PLAT_PATH)/uniphier_xlat_setup.c \
${XLAT_TABLES_LIB_SRCS}
BL2_SOURCES += common/desc_image_load.c \
drivers/io/io_block.c \
drivers/io/io_fip.c \
drivers/io/io_memmap.c \
drivers/io/io_storage.c \
lib/cpus/aarch64/cortex_a53.S \
lib/cpus/aarch64/cortex_a72.S \
$(PLAT_PATH)/uniphier_bl2_setup.c \
$(PLAT_PATH)/uniphier_boot_device.c \
$(PLAT_PATH)/uniphier_emmc.c \
$(PLAT_PATH)/uniphier_image_desc.c \
$(PLAT_PATH)/uniphier_io_storage.c \
$(PLAT_PATH)/uniphier_nand.c \
$(PLAT_PATH)/uniphier_scp.c \
$(PLAT_PATH)/uniphier_usb.c
# Include GICv3 driver files
include drivers/arm/gic/v3/gicv3.mk
BL31_SOURCES += drivers/arm/cci/cci.c \
${GICV3_SOURCES} \
lib/cpus/aarch64/cortex_a53.S \
lib/cpus/aarch64/cortex_a72.S \
plat/common/plat_gicv3.c \
plat/common/plat_psci_common.c \
$(PLAT_PATH)/uniphier_bl31_setup.c \
$(PLAT_PATH)/uniphier_boot_device.c \
$(PLAT_PATH)/uniphier_cci.c \
$(PLAT_PATH)/uniphier_gicv3.c \
$(PLAT_PATH)/uniphier_psci.c \
$(PLAT_PATH)/uniphier_scp.c \
$(PLAT_PATH)/uniphier_smp.S \
$(PLAT_PATH)/uniphier_syscnt.c \
$(PLAT_PATH)/uniphier_topology.c
ifeq (${TRUSTED_BOARD_BOOT},1)
include drivers/auth/mbedtls/mbedtls_crypto.mk
include drivers/auth/mbedtls/mbedtls_x509.mk
BL2_SOURCES += drivers/auth/auth_mod.c \
drivers/auth/crypto_mod.c \
drivers/auth/img_parser_mod.c \
drivers/auth/tbbr/tbbr_cot.c \
plat/common/tbbr/plat_tbbr.c \
$(PLAT_PATH)/uniphier_rotpk.S \
$(PLAT_PATH)/uniphier_tbbr.c
ROT_KEY = $(BUILD_PLAT)/rot_key.pem
ROTPK_HASH = $(BUILD_PLAT)/rotpk_sha256.bin
$(eval $(call add_define_val,ROTPK_HASH,'"$(ROTPK_HASH)"'))
$(BUILD_PLAT)/bl2/uniphier_rotpk.o: $(ROTPK_HASH)
certificates: $(ROT_KEY)
$(ROT_KEY): | $(BUILD_PLAT)
@echo " OPENSSL $@"
$(Q)openssl genrsa 2048 > $@ 2>/dev/null
$(ROTPK_HASH): $(ROT_KEY)
@echo " OPENSSL $@"
$(Q)openssl rsa -in $< -pubout -outform DER 2>/dev/null |\
openssl dgst -sha256 -binary > $@ 2>/dev/null
endif
ifeq (${FIP_GZIP},1)
include lib/zlib/zlib.mk
BL2_SOURCES += common/image_decompress.c \
$(ZLIB_SOURCES)
$(eval $(call add_define,UNIPHIER_DECOMPRESS_GZIP))
# compress all images loaded by BL2
SCP_BL2_PRE_TOOL_FILTER := GZIP
BL31_PRE_TOOL_FILTER := GZIP
BL32_PRE_TOOL_FILTER := GZIP
BL33_PRE_TOOL_FILTER := GZIP
endif
.PHONY: bl2_gzip
bl2_gzip: $(BUILD_PLAT)/bl2.bin.gz
%.gz: %
@echo " GZIP $@"
$(Q)gzip -n -f -9 $< --stdout > $@