blob: f61cdb3c3699e2ef5967577460741c6cdd5d0871 [file] [log] [blame]
/*
* Copyright (c) 2013-2018, ARM Limited and Contributors. All rights reserved.
*
* SPDX-License-Identifier: BSD-3-Clause
*/
#include <arch_helpers.h>
#include <arm_config.h>
#include <assert.h>
#include <debug.h>
#include <errno.h>
#include <gicv3.h>
#include <mmio.h>
#include <plat_arm.h>
#include <platform.h>
#include <psci.h>
#include <spe.h>
#include <v2m_def.h>
#include "../../../../drivers/arm/gic/v3/gicv3_private.h"
#include "drivers/pwrc/fvp_pwrc.h"
#include "fvp_def.h"
#include "fvp_private.h"
#if ARM_RECOM_STATE_ID_ENC
/*
* The table storing the valid idle power states. Ensure that the
* array entries are populated in ascending order of state-id to
* enable us to use binary search during power state validation.
* The table must be terminated by a NULL entry.
*/
const unsigned int arm_pm_idle_states[] = {
/* State-id - 0x01 */
arm_make_pwrstate_lvl1(ARM_LOCAL_STATE_RUN, ARM_LOCAL_STATE_RET,
ARM_PWR_LVL0, PSTATE_TYPE_STANDBY),
/* State-id - 0x02 */
arm_make_pwrstate_lvl1(ARM_LOCAL_STATE_RUN, ARM_LOCAL_STATE_OFF,
ARM_PWR_LVL0, PSTATE_TYPE_POWERDOWN),
/* State-id - 0x22 */
arm_make_pwrstate_lvl1(ARM_LOCAL_STATE_OFF, ARM_LOCAL_STATE_OFF,
ARM_PWR_LVL1, PSTATE_TYPE_POWERDOWN),
/* State-id - 0x222 */
arm_make_pwrstate_lvl2(ARM_LOCAL_STATE_OFF, ARM_LOCAL_STATE_OFF,
ARM_LOCAL_STATE_OFF, ARM_PWR_LVL2, PSTATE_TYPE_POWERDOWN),
0,
};
#endif
/*******************************************************************************
* Function which implements the common FVP specific operations to power down a
* cluster in response to a CPU_OFF or CPU_SUSPEND request.
******************************************************************************/
static void fvp_cluster_pwrdwn_common(void)
{
uint64_t mpidr = read_mpidr_el1();
#if ENABLE_SPE_FOR_LOWER_ELS
/*
* On power down we need to disable statistical profiling extensions
* before exiting coherency.
*/
spe_disable();
#endif
/* Disable coherency if this cluster is to be turned off */
fvp_interconnect_disable();
/* Program the power controller to turn the cluster off */
fvp_pwrc_write_pcoffr(mpidr);
}
/*
* Empty implementation of these hooks avoid setting the GICR_WAKER.Sleep bit
* on ARM GICv3 implementations on FVP. This is required, because FVP does not
* support SYSTEM_SUSPEND and it is `faked` in firmware. Hence, for wake up
* from `fake` system suspend the GIC must not be powered off.
*/
void arm_gicv3_distif_pre_save(unsigned int rdist_proc_num)
{}
void arm_gicv3_distif_post_restore(unsigned int rdist_proc_num)
{}
static void fvp_power_domain_on_finish_common(const psci_power_state_t *target_state)
{
unsigned long mpidr;
assert(target_state->pwr_domain_state[ARM_PWR_LVL0] ==
ARM_LOCAL_STATE_OFF);
/* Get the mpidr for this cpu */
mpidr = read_mpidr_el1();
/* Perform the common cluster specific operations */
if (target_state->pwr_domain_state[ARM_PWR_LVL1] ==
ARM_LOCAL_STATE_OFF) {
/*
* This CPU might have woken up whilst the cluster was
* attempting to power down. In this case the FVP power
* controller will have a pending cluster power off request
* which needs to be cleared by writing to the PPONR register.
* This prevents the power controller from interpreting a
* subsequent entry of this cpu into a simple wfi as a power
* down request.
*/
fvp_pwrc_write_pponr(mpidr);
/* Enable coherency if this cluster was off */
fvp_interconnect_enable();
}
/* Perform the common system specific operations */
if (target_state->pwr_domain_state[ARM_PWR_LVL2] ==
ARM_LOCAL_STATE_OFF)
arm_system_pwr_domain_resume();
/*
* Clear PWKUPR.WEN bit to ensure interrupts do not interfere
* with a cpu power down unless the bit is set again
*/
fvp_pwrc_clr_wen(mpidr);
}
/*******************************************************************************
* FVP handler called when a CPU is about to enter standby.
******************************************************************************/
static void fvp_cpu_standby(plat_local_state_t cpu_state)
{
assert(cpu_state == ARM_LOCAL_STATE_RET);
/*
* Enter standby state
* dsb is good practice before using wfi to enter low power states
*/
dsb();
wfi();
}
/*******************************************************************************
* FVP handler called when a power domain is about to be turned on. The
* mpidr determines the CPU to be turned on.
******************************************************************************/
static int fvp_pwr_domain_on(u_register_t mpidr)
{
int rc = PSCI_E_SUCCESS;
unsigned int psysr;
/*
* Ensure that we do not cancel an inflight power off request for the
* target cpu. That would leave it in a zombie wfi. Wait for it to power
* off and then program the power controller to turn that CPU on.
*/
do {
psysr = fvp_pwrc_read_psysr(mpidr);
} while (psysr & PSYSR_AFF_L0);
fvp_pwrc_write_pponr(mpidr);
return rc;
}
/*******************************************************************************
* FVP handler called when a power domain is about to be turned off. The
* target_state encodes the power state that each level should transition to.
******************************************************************************/
static void fvp_pwr_domain_off(const psci_power_state_t *target_state)
{
assert(target_state->pwr_domain_state[ARM_PWR_LVL0] ==
ARM_LOCAL_STATE_OFF);
/*
* If execution reaches this stage then this power domain will be
* suspended. Perform at least the cpu specific actions followed
* by the cluster specific operations if applicable.
*/
/* Prevent interrupts from spuriously waking up this cpu */
plat_arm_gic_cpuif_disable();
/* Turn redistributor off */
plat_arm_gic_redistif_off();
/* Program the power controller to power off this cpu. */
fvp_pwrc_write_ppoffr(read_mpidr_el1());
if (target_state->pwr_domain_state[ARM_PWR_LVL1] ==
ARM_LOCAL_STATE_OFF)
fvp_cluster_pwrdwn_common();
}
/*******************************************************************************
* FVP handler called when a power domain is about to be suspended. The
* target_state encodes the power state that each level should transition to.
******************************************************************************/
static void fvp_pwr_domain_suspend(const psci_power_state_t *target_state)
{
unsigned long mpidr;
/*
* FVP has retention only at cpu level. Just return
* as nothing is to be done for retention.
*/
if (target_state->pwr_domain_state[ARM_PWR_LVL0] ==
ARM_LOCAL_STATE_RET)
return;
assert(target_state->pwr_domain_state[ARM_PWR_LVL0] ==
ARM_LOCAL_STATE_OFF);
/* Get the mpidr for this cpu */
mpidr = read_mpidr_el1();
/* Program the power controller to enable wakeup interrupts. */
fvp_pwrc_set_wen(mpidr);
/* Prevent interrupts from spuriously waking up this cpu */
plat_arm_gic_cpuif_disable();
/*
* The Redistributor is not powered off as it can potentially prevent
* wake up events reaching the CPUIF and/or might lead to losing
* register context.
*/
/* Perform the common cluster specific operations */
if (target_state->pwr_domain_state[ARM_PWR_LVL1] ==
ARM_LOCAL_STATE_OFF)
fvp_cluster_pwrdwn_common();
/* Perform the common system specific operations */
if (target_state->pwr_domain_state[ARM_PWR_LVL2] ==
ARM_LOCAL_STATE_OFF)
arm_system_pwr_domain_save();
/* Program the power controller to power off this cpu. */
fvp_pwrc_write_ppoffr(read_mpidr_el1());
}
/*******************************************************************************
* FVP handler called when a power domain has just been powered on after
* being turned off earlier. The target_state encodes the low power state that
* each level has woken up from.
******************************************************************************/
static void fvp_pwr_domain_on_finish(const psci_power_state_t *target_state)
{
fvp_power_domain_on_finish_common(target_state);
/* Enable the gic cpu interface */
plat_arm_gic_pcpu_init();
/* Program the gic per-cpu distributor or re-distributor interface */
plat_arm_gic_cpuif_enable();
}
/*******************************************************************************
* FVP handler called when a power domain has just been powered on after
* having been suspended earlier. The target_state encodes the low power state
* that each level has woken up from.
* TODO: At the moment we reuse the on finisher and reinitialize the secure
* context. Need to implement a separate suspend finisher.
******************************************************************************/
static void fvp_pwr_domain_suspend_finish(const psci_power_state_t *target_state)
{
/*
* Nothing to be done on waking up from retention from CPU level.
*/
if (target_state->pwr_domain_state[ARM_PWR_LVL0] ==
ARM_LOCAL_STATE_RET)
return;
fvp_power_domain_on_finish_common(target_state);
/* Enable the gic cpu interface */
plat_arm_gic_cpuif_enable();
}
/*******************************************************************************
* FVP handlers to shutdown/reboot the system
******************************************************************************/
static void __dead2 fvp_system_off(void)
{
/* Write the System Configuration Control Register */
mmio_write_32(V2M_SYSREGS_BASE + V2M_SYS_CFGCTRL,
V2M_CFGCTRL_START |
V2M_CFGCTRL_RW |
V2M_CFGCTRL_FUNC(V2M_FUNC_SHUTDOWN));
wfi();
ERROR("FVP System Off: operation not handled.\n");
panic();
}
static void __dead2 fvp_system_reset(void)
{
/* Write the System Configuration Control Register */
mmio_write_32(V2M_SYSREGS_BASE + V2M_SYS_CFGCTRL,
V2M_CFGCTRL_START |
V2M_CFGCTRL_RW |
V2M_CFGCTRL_FUNC(V2M_FUNC_REBOOT));
wfi();
ERROR("FVP System Reset: operation not handled.\n");
panic();
}
static int fvp_node_hw_state(u_register_t target_cpu,
unsigned int power_level)
{
unsigned int psysr;
int ret;
/*
* The format of 'power_level' is implementation-defined, but 0 must
* mean a CPU. We also allow 1 to denote the cluster
*/
if (power_level != ARM_PWR_LVL0 && power_level != ARM_PWR_LVL1)
return PSCI_E_INVALID_PARAMS;
/*
* Read the status of the given MPDIR from FVP power controller. The
* power controller only gives us on/off status, so map that to expected
* return values of the PSCI call
*/
psysr = fvp_pwrc_read_psysr(target_cpu);
if (psysr == PSYSR_INVALID)
return PSCI_E_INVALID_PARAMS;
switch (power_level) {
case ARM_PWR_LVL0:
ret = (psysr & PSYSR_AFF_L0) ? HW_ON : HW_OFF;
break;
case ARM_PWR_LVL1:
ret = (psysr & PSYSR_AFF_L1) ? HW_ON : HW_OFF;
break;
}
return ret;
}
/*
* The FVP doesn't truly support power management at SYSTEM power domain. The
* SYSTEM_SUSPEND will be down-graded to the cluster level within the platform
* layer. The `fake` SYSTEM_SUSPEND allows us to validate some of the driver
* save and restore sequences on FVP.
*/
#if !ARM_BL31_IN_DRAM
static void fvp_get_sys_suspend_power_state(psci_power_state_t *req_state)
{
unsigned int i;
for (i = ARM_PWR_LVL0; i <= PLAT_MAX_PWR_LVL; i++)
req_state->pwr_domain_state[i] = ARM_LOCAL_STATE_OFF;
}
#endif
/*******************************************************************************
* Handler to filter PSCI requests.
******************************************************************************/
/*
* The system power domain suspend is only supported only via
* PSCI SYSTEM_SUSPEND API. PSCI CPU_SUSPEND request to system power domain
* will be downgraded to the lower level.
*/
static int fvp_validate_power_state(unsigned int power_state,
psci_power_state_t *req_state)
{
int rc;
rc = arm_validate_power_state(power_state, req_state);
/*
* Ensure that the system power domain level is never suspended
* via PSCI CPU SUSPEND API. Currently system suspend is only
* supported via PSCI SYSTEM SUSPEND API.
*/
req_state->pwr_domain_state[ARM_PWR_LVL2] = ARM_LOCAL_STATE_RUN;
return rc;
}
/*
* Custom `translate_power_state_by_mpidr` handler for FVP. Unlike in the
* `fvp_validate_power_state`, we do not downgrade the system power
* domain level request in `power_state` as it will be used to query the
* PSCI_STAT_COUNT/RESIDENCY at the system power domain level.
*/
static int fvp_translate_power_state_by_mpidr(u_register_t mpidr,
unsigned int power_state,
psci_power_state_t *output_state)
{
return arm_validate_power_state(power_state, output_state);
}
/*******************************************************************************
* Export the platform handlers via plat_arm_psci_pm_ops. The ARM Standard
* platform layer will take care of registering the handlers with PSCI.
******************************************************************************/
plat_psci_ops_t plat_arm_psci_pm_ops = {
.cpu_standby = fvp_cpu_standby,
.pwr_domain_on = fvp_pwr_domain_on,
.pwr_domain_off = fvp_pwr_domain_off,
.pwr_domain_suspend = fvp_pwr_domain_suspend,
.pwr_domain_on_finish = fvp_pwr_domain_on_finish,
.pwr_domain_suspend_finish = fvp_pwr_domain_suspend_finish,
.system_off = fvp_system_off,
.system_reset = fvp_system_reset,
.validate_power_state = fvp_validate_power_state,
.validate_ns_entrypoint = arm_validate_psci_entrypoint,
.translate_power_state_by_mpidr = fvp_translate_power_state_by_mpidr,
.get_node_hw_state = fvp_node_hw_state,
#if !ARM_BL31_IN_DRAM
/*
* The TrustZone Controller is set up during the warmboot sequence after
* resuming the CPU from a SYSTEM_SUSPEND. If BL31 is located in SRAM
* this is not a problem but, if it is in TZC-secured DRAM, it tries to
* reconfigure the same memory it is running on, causing an exception.
*/
.get_sys_suspend_power_state = fvp_get_sys_suspend_power_state,
#endif
#if !RESET_TO_BL31 && !RESET_TO_SP_MIN
/*
* mem_protect is not supported in RESET_TO_BL31 and RESET_TO_SP_MIN,
* as that would require mapping in all of NS DRAM into BL31 or BL32.
*/
.mem_protect_chk = arm_psci_mem_protect_chk,
.read_mem_protect = arm_psci_read_mem_protect,
.write_mem_protect = arm_nor_psci_write_mem_protect,
#endif
};