| /* |
| * Copyright (c) 2021-2022, Arm Limited and Contributors. All rights reserved. |
| * |
| * SPDX-License-Identifier: BSD-3-Clause |
| */ |
| |
| #include <stdbool.h> |
| |
| #include <arch.h> |
| #include <arch_helpers.h> |
| #include <common/debug.h> |
| #include <lib/el3_runtime/context_mgmt.h> |
| #include <lib/extensions/sme.h> |
| #include <lib/extensions/sve.h> |
| |
| static bool feat_sme_supported(void) |
| { |
| uint64_t features; |
| |
| features = read_id_aa64pfr1_el1() >> ID_AA64PFR1_EL1_SME_SHIFT; |
| return (features & ID_AA64PFR1_EL1_SME_MASK) != 0U; |
| } |
| |
| static bool feat_sme_fa64_supported(void) |
| { |
| uint64_t features; |
| |
| features = read_id_aa64smfr0_el1(); |
| return (features & ID_AA64SMFR0_EL1_FA64_BIT) != 0U; |
| } |
| |
| void sme_enable(cpu_context_t *context) |
| { |
| u_register_t reg; |
| u_register_t cptr_el3; |
| el3_state_t *state; |
| |
| /* Make sure SME is implemented in hardware before continuing. */ |
| if (!feat_sme_supported()) { |
| /* Perhaps the hardware supports SVE only */ |
| sve_enable(context); |
| return; |
| } |
| |
| /* Get the context state. */ |
| state = get_el3state_ctx(context); |
| |
| /* Enable SME in CPTR_EL3. */ |
| reg = read_ctx_reg(state, CTX_CPTR_EL3); |
| reg |= ESM_BIT; |
| write_ctx_reg(state, CTX_CPTR_EL3, reg); |
| |
| /* Set the ENTP2 bit in SCR_EL3 to enable access to TPIDR2_EL0. */ |
| reg = read_ctx_reg(state, CTX_SCR_EL3); |
| reg |= SCR_ENTP2_BIT; |
| write_ctx_reg(state, CTX_SCR_EL3, reg); |
| |
| /* Set CPTR_EL3.ESM bit so we can write SMCR_EL3 without trapping. */ |
| cptr_el3 = read_cptr_el3(); |
| write_cptr_el3(cptr_el3 | ESM_BIT); |
| isb(); |
| |
| /* |
| * Set the max LEN value and FA64 bit. This register is set up globally |
| * to be the least restrictive, then lower ELs can restrict as needed |
| * using SMCR_EL2 and SMCR_EL1. |
| */ |
| reg = SMCR_ELX_LEN_MASK; |
| if (feat_sme_fa64_supported()) { |
| VERBOSE("[SME] FA64 enabled\n"); |
| reg |= SMCR_ELX_FA64_BIT; |
| } |
| write_smcr_el3(reg); |
| |
| /* Reset CPTR_EL3 value. */ |
| write_cptr_el3(cptr_el3); |
| isb(); |
| |
| /* Enable SVE/FPU in addition to SME. */ |
| sve_enable(context); |
| } |
| |
| void sme_disable(cpu_context_t *context) |
| { |
| u_register_t reg; |
| el3_state_t *state; |
| |
| /* Make sure SME is implemented in hardware before continuing. */ |
| if (!feat_sme_supported()) { |
| /* Perhaps the hardware supports SVE only */ |
| sve_disable(context); |
| return; |
| } |
| |
| /* Get the context state. */ |
| state = get_el3state_ctx(context); |
| |
| /* Disable SME, SVE, and FPU since they all share registers. */ |
| reg = read_ctx_reg(state, CTX_CPTR_EL3); |
| reg &= ~ESM_BIT; /* Trap SME */ |
| reg &= ~CPTR_EZ_BIT; /* Trap SVE */ |
| reg |= TFP_BIT; /* Trap FPU/SIMD */ |
| write_ctx_reg(state, CTX_CPTR_EL3, reg); |
| |
| /* Disable access to TPIDR2_EL0. */ |
| reg = read_ctx_reg(state, CTX_SCR_EL3); |
| reg &= ~SCR_ENTP2_BIT; |
| write_ctx_reg(state, CTX_SCR_EL3, reg); |
| } |