| # |
| # Copyright (c) 2015-2023, Arm Limited and Contributors. All rights reserved. |
| # |
| # SPDX-License-Identifier: BSD-3-Clause |
| # |
| |
| include plat/st/common/common.mk |
| |
| ARM_CORTEX_A7 := yes |
| ARM_WITH_NEON := yes |
| USE_COHERENT_MEM := 0 |
| |
| # Default Device tree |
| DTB_FILE_NAME ?= stm32mp157c-ev1.dtb |
| |
| STM32MP13 ?= 0 |
| STM32MP15 ?= 0 |
| |
| ifeq ($(STM32MP13),1) |
| ifeq ($(STM32MP15),1) |
| $(error Cannot enable both flags STM32MP13 and STM32MP15) |
| endif |
| STM32MP13 := 1 |
| STM32MP15 := 0 |
| else ifeq ($(STM32MP15),1) |
| STM32MP13 := 0 |
| STM32MP15 := 1 |
| else ifneq ($(findstring stm32mp13,$(DTB_FILE_NAME)),) |
| STM32MP13 := 1 |
| STM32MP15 := 0 |
| else ifneq ($(findstring stm32mp15,$(DTB_FILE_NAME)),) |
| STM32MP13 := 0 |
| STM32MP15 := 1 |
| endif |
| |
| ifeq ($(STM32MP13),1) |
| # Will use SRAM2 as mbedtls heap |
| STM32MP_USE_EXTERNAL_HEAP := 1 |
| |
| # DDR controller with single AXI port and 16-bit interface |
| STM32MP_DDR_DUAL_AXI_PORT:= 0 |
| STM32MP_DDR_32BIT_INTERFACE:= 0 |
| |
| ifeq (${TRUSTED_BOARD_BOOT},1) |
| # PKA algo to include |
| PKA_USE_NIST_P256 := 1 |
| PKA_USE_BRAINPOOL_P256T1:= 1 |
| endif |
| |
| # STM32 image header version v2.0 |
| STM32_HEADER_VERSION_MAJOR:= 2 |
| STM32_HEADER_VERSION_MINOR:= 0 |
| endif |
| |
| ifeq ($(STM32MP15),1) |
| # DDR controller with dual AXI port and 32-bit interface |
| STM32MP_DDR_DUAL_AXI_PORT:= 1 |
| STM32MP_DDR_32BIT_INTERFACE:= 1 |
| |
| # STM32 image header version v1.0 |
| STM32_HEADER_VERSION_MAJOR:= 1 |
| STM32_HEADER_VERSION_MINOR:= 0 |
| |
| # Add OP-TEE reserved shared memory area in mapping |
| STM32MP15_OPTEE_RSV_SHM := 0 |
| $(eval $(call add_defines,STM32MP15_OPTEE_RSV_SHM)) |
| |
| STM32MP_CRYPTO_ROM_LIB := 1 |
| |
| # Decryption support |
| ifneq ($(DECRYPTION_SUPPORT),none) |
| $(error "DECRYPTION_SUPPORT not supported on STM32MP15") |
| endif |
| endif |
| |
| PKA_USE_NIST_P256 ?= 0 |
| PKA_USE_BRAINPOOL_P256T1 ?= 0 |
| |
| ifeq ($(AARCH32_SP),sp_min) |
| # Disable Neon support: sp_min runtime may conflict with non-secure world |
| TF_CFLAGS += -mfloat-abi=soft |
| endif |
| |
| # Not needed for Cortex-A7 |
| WORKAROUND_CVE_2017_5715:= 0 |
| WORKAROUND_CVE_2022_23960:= 0 |
| |
| # Number of TF-A copies in the device |
| STM32_TF_A_COPIES := 2 |
| |
| # PLAT_PARTITION_MAX_ENTRIES must take care of STM32_TF-A_COPIES and other partitions |
| # such as metadata (2) to find all the FIP partitions (default is 2). |
| PLAT_PARTITION_MAX_ENTRIES := $(shell echo $$(($(STM32_TF_A_COPIES) + 4))) |
| |
| ifeq (${PSA_FWU_SUPPORT},1) |
| # Number of banks of updatable firmware |
| NR_OF_FW_BANKS := 2 |
| NR_OF_IMAGES_IN_FW_BANK := 1 |
| |
| FWU_MAX_PART = $(shell echo $$(($(STM32_TF_A_COPIES) + 2 + $(NR_OF_FW_BANKS)))) |
| ifeq ($(shell test $(FWU_MAX_PART) -gt $(PLAT_PARTITION_MAX_ENTRIES); echo $$?),0) |
| $(error "Required partition number is $(FWU_MAX_PART) where PLAT_PARTITION_MAX_ENTRIES is only \ |
| $(PLAT_PARTITION_MAX_ENTRIES)") |
| endif |
| endif |
| |
| ifeq ($(STM32MP13),1) |
| STM32_HASH_VER := 4 |
| STM32_RNG_VER := 4 |
| else # Assuming STM32MP15 |
| STM32_HASH_VER := 2 |
| STM32_RNG_VER := 2 |
| endif |
| |
| # Download load address for serial boot devices |
| DWL_BUFFER_BASE ?= 0xC7000000 |
| |
| # Device tree |
| ifeq ($(STM32MP13),1) |
| BL2_DTSI := stm32mp13-bl2.dtsi |
| FDT_SOURCES := $(addprefix ${BUILD_PLAT}/fdts/, $(patsubst %.dtb,%-bl2.dts,$(DTB_FILE_NAME))) |
| else |
| BL2_DTSI := stm32mp15-bl2.dtsi |
| FDT_SOURCES := $(addprefix ${BUILD_PLAT}/fdts/, $(patsubst %.dtb,%-bl2.dts,$(DTB_FILE_NAME))) |
| ifeq ($(AARCH32_SP),sp_min) |
| BL32_DTSI := stm32mp15-bl32.dtsi |
| FDT_SOURCES += $(addprefix ${BUILD_PLAT}/fdts/, $(patsubst %.dtb,%-bl32.dts,$(DTB_FILE_NAME))) |
| endif |
| endif |
| |
| # Macros and rules to build TF binary |
| STM32_TF_STM32 := $(addprefix ${BUILD_PLAT}/tf-a-, $(patsubst %.dtb,%.stm32,$(DTB_FILE_NAME))) |
| STM32_LD_FILE := plat/st/stm32mp1/stm32mp1.ld.S |
| STM32_BINARY_MAPPING := plat/st/stm32mp1/stm32mp1.S |
| |
| ifeq ($(AARCH32_SP),sp_min) |
| # BL32 is built only if using SP_MIN |
| BL32_DEP := bl32 |
| ASFLAGS += -DBL32_BIN_PATH=\"${BUILD_PLAT}/bl32.bin\" |
| endif |
| |
| STM32MP_FW_CONFIG_NAME := $(patsubst %.dtb,%-fw-config.dtb,$(DTB_FILE_NAME)) |
| STM32MP_FW_CONFIG := ${BUILD_PLAT}/fdts/$(STM32MP_FW_CONFIG_NAME) |
| ifneq (${AARCH32_SP},none) |
| FDT_SOURCES += $(addprefix fdts/, $(patsubst %.dtb,%.dts,$(STM32MP_FW_CONFIG_NAME))) |
| endif |
| # Add the FW_CONFIG to FIP and specify the same to certtool |
| $(eval $(call TOOL_ADD_PAYLOAD,${STM32MP_FW_CONFIG},--fw-config)) |
| ifeq ($(GENERATE_COT),1) |
| STM32MP_CFG_CERT := $(BUILD_PLAT)/stm32mp_cfg_cert.crt |
| # Add the STM32MP_CFG_CERT to FIP and specify the same to certtool |
| $(eval $(call TOOL_ADD_PAYLOAD,${STM32MP_CFG_CERT},--stm32mp-cfg-cert)) |
| endif |
| ifeq ($(AARCH32_SP),sp_min) |
| STM32MP_TOS_FW_CONFIG := $(addprefix ${BUILD_PLAT}/fdts/, $(patsubst %.dtb,%-bl32.dtb,$(DTB_FILE_NAME))) |
| $(eval $(call TOOL_ADD_PAYLOAD,${STM32MP_TOS_FW_CONFIG},--tos-fw-config)) |
| endif |
| |
| # Enable flags for C files |
| $(eval $(call assert_booleans,\ |
| $(sort \ |
| PKA_USE_BRAINPOOL_P256T1 \ |
| PKA_USE_NIST_P256 \ |
| STM32MP_CRYPTO_ROM_LIB \ |
| STM32MP_DDR_32BIT_INTERFACE \ |
| STM32MP_DDR_DUAL_AXI_PORT \ |
| STM32MP_USE_EXTERNAL_HEAP \ |
| STM32MP13 \ |
| STM32MP15 \ |
| ))) |
| |
| $(eval $(call assert_numerics,\ |
| $(sort \ |
| PLAT_PARTITION_MAX_ENTRIES \ |
| STM32_HASH_VER \ |
| STM32_HEADER_VERSION_MAJOR \ |
| STM32_RNG_VER \ |
| STM32_TF_A_COPIES \ |
| ))) |
| |
| $(eval $(call add_defines,\ |
| $(sort \ |
| DWL_BUFFER_BASE \ |
| PKA_USE_BRAINPOOL_P256T1 \ |
| PKA_USE_NIST_P256 \ |
| PLAT_PARTITION_MAX_ENTRIES \ |
| PLAT_TBBR_IMG_DEF \ |
| STM32_HASH_VER \ |
| STM32_HEADER_VERSION_MAJOR \ |
| STM32_RNG_VER \ |
| STM32_TF_A_COPIES \ |
| STM32MP_CRYPTO_ROM_LIB \ |
| STM32MP_DDR_32BIT_INTERFACE \ |
| STM32MP_DDR_DUAL_AXI_PORT \ |
| STM32MP_USE_EXTERNAL_HEAP \ |
| STM32MP13 \ |
| STM32MP15 \ |
| ))) |
| |
| # Include paths and source files |
| PLAT_INCLUDES += -Iplat/st/stm32mp1/include/ |
| |
| PLAT_BL_COMMON_SOURCES += plat/st/stm32mp1/stm32mp1_private.c |
| |
| PLAT_BL_COMMON_SOURCES += drivers/st/uart/aarch32/stm32_console.S |
| |
| ifneq (${ENABLE_STACK_PROTECTOR},0) |
| PLAT_BL_COMMON_SOURCES += plat/st/stm32mp1/stm32mp1_stack_protector.c |
| endif |
| |
| PLAT_BL_COMMON_SOURCES += lib/cpus/aarch32/cortex_a7.S |
| |
| PLAT_BL_COMMON_SOURCES += drivers/arm/tzc/tzc400.c \ |
| drivers/st/bsec/bsec2.c \ |
| drivers/st/ddr/stm32mp1_ddr_helpers.c \ |
| drivers/st/i2c/stm32_i2c.c \ |
| drivers/st/iwdg/stm32_iwdg.c \ |
| drivers/st/pmic/stm32mp_pmic.c \ |
| drivers/st/pmic/stpmic1.c \ |
| drivers/st/reset/stm32mp1_reset.c \ |
| plat/st/stm32mp1/stm32mp1_dbgmcu.c \ |
| plat/st/stm32mp1/stm32mp1_helper.S \ |
| plat/st/stm32mp1/stm32mp1_syscfg.c |
| |
| ifeq ($(STM32MP13),1) |
| PLAT_BL_COMMON_SOURCES += drivers/st/clk/clk-stm32-core.c \ |
| drivers/st/clk/clk-stm32mp13.c \ |
| drivers/st/crypto/stm32_rng.c |
| else |
| PLAT_BL_COMMON_SOURCES += drivers/st/clk/stm32mp1_clk.c |
| endif |
| |
| BL2_SOURCES += plat/st/stm32mp1/plat_bl2_mem_params_desc.c \ |
| plat/st/stm32mp1/stm32mp1_fconf_firewall.c |
| |
| ifeq (${PSA_FWU_SUPPORT},1) |
| include drivers/fwu/fwu.mk |
| endif |
| |
| BL2_SOURCES += drivers/st/crypto/stm32_hash.c \ |
| plat/st/stm32mp1/bl2_plat_setup.c |
| |
| ifeq (${TRUSTED_BOARD_BOOT},1) |
| ifeq ($(STM32MP13),1) |
| BL2_SOURCES += drivers/st/crypto/stm32_pka.c |
| BL2_SOURCES += drivers/st/crypto/stm32_saes.c |
| endif |
| endif |
| |
| ifneq ($(filter 1,${STM32MP_EMMC} ${STM32MP_SDMMC}),) |
| BL2_SOURCES += drivers/st/mmc/stm32_sdmmc2.c |
| endif |
| |
| ifeq (${STM32MP_RAW_NAND},1) |
| BL2_SOURCES += drivers/st/fmc/stm32_fmc2_nand.c |
| endif |
| |
| ifneq ($(filter 1,${STM32MP_SPI_NAND} ${STM32MP_SPI_NOR}),) |
| BL2_SOURCES += drivers/st/spi/stm32_qspi.c |
| endif |
| |
| ifneq ($(filter 1,${STM32MP_RAW_NAND} ${STM32MP_SPI_NAND} ${STM32MP_SPI_NOR}),) |
| BL2_SOURCES += plat/st/stm32mp1/stm32mp1_boot_device.c |
| endif |
| |
| ifeq (${STM32MP_UART_PROGRAMMER},1) |
| BL2_SOURCES += drivers/st/uart/stm32_uart.c |
| endif |
| |
| ifeq (${STM32MP_USB_PROGRAMMER},1) |
| #The DFU stack uses only one end point, reduce the USB stack footprint |
| $(eval $(call add_define_val,CONFIG_USBD_EP_NB,1U)) |
| BL2_SOURCES += drivers/st/usb/stm32mp1_usb.c \ |
| plat/st/stm32mp1/stm32mp1_usb_dfu.c |
| endif |
| |
| BL2_SOURCES += drivers/st/ddr/stm32mp1_ddr.c \ |
| drivers/st/ddr/stm32mp1_ram.c |
| |
| ifeq ($(AARCH32_SP),sp_min) |
| # Create DTB file for BL32 |
| ${BUILD_PLAT}/fdts/%-bl32.dts: fdts/%.dts fdts/${BL32_DTSI} | ${BUILD_PLAT} fdt_dirs |
| @echo '#include "$(patsubst fdts/%,%,$<)"' > $@ |
| @echo '#include "${BL32_DTSI}"' >> $@ |
| |
| ${BUILD_PLAT}/fdts/%-bl32.dtb: ${BUILD_PLAT}/fdts/%-bl32.dts |
| endif |
| |
| include plat/st/common/common_rules.mk |