| /* |
| * Copyright (c) 2015-2023, ARM Limited and Contributors. All rights reserved. |
| * |
| * SPDX-License-Identifier: BSD-3-Clause |
| */ |
| |
| #include <assert.h> |
| #include <errno.h> |
| |
| #include <arch_helpers.h> |
| #include <common/debug.h> |
| #include <drivers/clk.h> |
| #include <drivers/delay_timer.h> |
| #include <drivers/st/stm32_console.h> |
| #include <drivers/st/stm32mp_clkfunc.h> |
| #include <drivers/st/stm32mp_reset.h> |
| #include <lib/mmio.h> |
| #include <lib/smccc.h> |
| #include <lib/xlat_tables/xlat_tables_v2.h> |
| #include <plat/common/platform.h> |
| #include <services/arm_arch_svc.h> |
| |
| #include <platform_def.h> |
| |
| #define HEADER_VERSION_MAJOR_MASK GENMASK(23, 16) |
| #define RESET_TIMEOUT_US_1MS 1000U |
| |
| /* Internal layout of the 32bit OTP word board_id */ |
| #define BOARD_ID_BOARD_NB_MASK GENMASK_32(31, 16) |
| #define BOARD_ID_BOARD_NB_SHIFT 16 |
| #define BOARD_ID_VARCPN_MASK GENMASK_32(15, 12) |
| #define BOARD_ID_VARCPN_SHIFT 12 |
| #define BOARD_ID_REVISION_MASK GENMASK_32(11, 8) |
| #define BOARD_ID_REVISION_SHIFT 8 |
| #define BOARD_ID_VARFG_MASK GENMASK_32(7, 4) |
| #define BOARD_ID_VARFG_SHIFT 4 |
| #define BOARD_ID_BOM_MASK GENMASK_32(3, 0) |
| |
| #define BOARD_ID2NB(_id) (((_id) & BOARD_ID_BOARD_NB_MASK) >> \ |
| BOARD_ID_BOARD_NB_SHIFT) |
| #define BOARD_ID2VARCPN(_id) (((_id) & BOARD_ID_VARCPN_MASK) >> \ |
| BOARD_ID_VARCPN_SHIFT) |
| #define BOARD_ID2REV(_id) (((_id) & BOARD_ID_REVISION_MASK) >> \ |
| BOARD_ID_REVISION_SHIFT) |
| #define BOARD_ID2VARFG(_id) (((_id) & BOARD_ID_VARFG_MASK) >> \ |
| BOARD_ID_VARFG_SHIFT) |
| #define BOARD_ID2BOM(_id) ((_id) & BOARD_ID_BOM_MASK) |
| |
| #define BOOT_AUTH_MASK GENMASK_32(23, 20) |
| #define BOOT_AUTH_SHIFT 20 |
| #define BOOT_PART_MASK GENMASK_32(19, 16) |
| #define BOOT_PART_SHIFT 16 |
| #define BOOT_ITF_MASK GENMASK_32(15, 12) |
| #define BOOT_ITF_SHIFT 12 |
| #define BOOT_INST_MASK GENMASK_32(11, 8) |
| #define BOOT_INST_SHIFT 8 |
| |
| static console_t console; |
| |
| uintptr_t plat_get_ns_image_entrypoint(void) |
| { |
| return BL33_BASE; |
| } |
| |
| unsigned int plat_get_syscnt_freq2(void) |
| { |
| return read_cntfrq_el0(); |
| } |
| |
| static uintptr_t boot_ctx_address; |
| static uint16_t boot_itf_selected; |
| |
| void stm32mp_save_boot_ctx_address(uintptr_t address) |
| { |
| boot_api_context_t *boot_context = (boot_api_context_t *)address; |
| |
| boot_ctx_address = address; |
| boot_itf_selected = boot_context->boot_interface_selected; |
| } |
| |
| uintptr_t stm32mp_get_boot_ctx_address(void) |
| { |
| return boot_ctx_address; |
| } |
| |
| uint16_t stm32mp_get_boot_itf_selected(void) |
| { |
| return boot_itf_selected; |
| } |
| |
| uintptr_t stm32mp_ddrctrl_base(void) |
| { |
| return DDRCTRL_BASE; |
| } |
| |
| uintptr_t stm32mp_ddrphyc_base(void) |
| { |
| return DDRPHYC_BASE; |
| } |
| |
| uintptr_t stm32mp_pwr_base(void) |
| { |
| return PWR_BASE; |
| } |
| |
| uintptr_t stm32mp_rcc_base(void) |
| { |
| return RCC_BASE; |
| } |
| |
| bool stm32mp_lock_available(void) |
| { |
| const uint32_t c_m_bits = SCTLR_M_BIT | SCTLR_C_BIT; |
| |
| /* The spinlocks are used only when MMU and data cache are enabled */ |
| #ifdef __aarch64__ |
| return (read_sctlr_el3() & c_m_bits) == c_m_bits; |
| #else |
| return (read_sctlr() & c_m_bits) == c_m_bits; |
| #endif |
| } |
| |
| int stm32mp_map_ddr_non_cacheable(void) |
| { |
| return mmap_add_dynamic_region(STM32MP_DDR_BASE, STM32MP_DDR_BASE, |
| STM32MP_DDR_MAX_SIZE, |
| MT_NON_CACHEABLE | MT_RW | MT_SECURE); |
| } |
| |
| int stm32mp_unmap_ddr(void) |
| { |
| return mmap_remove_dynamic_region(STM32MP_DDR_BASE, |
| STM32MP_DDR_MAX_SIZE); |
| } |
| |
| int stm32_get_otp_index(const char *otp_name, uint32_t *otp_idx, |
| uint32_t *otp_len) |
| { |
| assert(otp_name != NULL); |
| assert(otp_idx != NULL); |
| |
| return dt_find_otp_name(otp_name, otp_idx, otp_len); |
| } |
| |
| int stm32_get_otp_value(const char *otp_name, uint32_t *otp_val) |
| { |
| uint32_t otp_idx; |
| |
| assert(otp_name != NULL); |
| assert(otp_val != NULL); |
| |
| if (stm32_get_otp_index(otp_name, &otp_idx, NULL) != 0) { |
| return -1; |
| } |
| |
| if (stm32_get_otp_value_from_idx(otp_idx, otp_val) != 0) { |
| ERROR("BSEC: %s Read Error\n", otp_name); |
| return -1; |
| } |
| |
| return 0; |
| } |
| |
| int stm32_get_otp_value_from_idx(const uint32_t otp_idx, uint32_t *otp_val) |
| { |
| uint32_t ret = BSEC_NOT_SUPPORTED; |
| |
| assert(otp_val != NULL); |
| |
| #if defined(IMAGE_BL2) |
| ret = bsec_shadow_read_otp(otp_val, otp_idx); |
| #elif defined(IMAGE_BL32) |
| ret = bsec_read_otp(otp_val, otp_idx); |
| #else |
| #error "Not supported" |
| #endif |
| if (ret != BSEC_OK) { |
| ERROR("BSEC: idx=%u Read Error\n", otp_idx); |
| return -1; |
| } |
| |
| return 0; |
| } |
| |
| #if defined(IMAGE_BL2) |
| static void reset_uart(uint32_t reset) |
| { |
| int ret; |
| |
| ret = stm32mp_reset_assert(reset, RESET_TIMEOUT_US_1MS); |
| if (ret != 0) { |
| panic(); |
| } |
| |
| udelay(2); |
| |
| ret = stm32mp_reset_deassert(reset, RESET_TIMEOUT_US_1MS); |
| if (ret != 0) { |
| panic(); |
| } |
| |
| mdelay(1); |
| } |
| #endif |
| |
| static void set_console(uintptr_t base, uint32_t clk_rate) |
| { |
| unsigned int console_flags; |
| |
| if (console_stm32_register(base, clk_rate, |
| (uint32_t)STM32MP_UART_BAUDRATE, &console) == 0) { |
| panic(); |
| } |
| |
| console_flags = CONSOLE_FLAG_BOOT | CONSOLE_FLAG_CRASH | |
| CONSOLE_FLAG_TRANSLATE_CRLF; |
| #if !defined(IMAGE_BL2) && defined(DEBUG) |
| console_flags |= CONSOLE_FLAG_RUNTIME; |
| #endif |
| |
| console_set_scope(&console, console_flags); |
| } |
| |
| int stm32mp_uart_console_setup(void) |
| { |
| struct dt_node_info dt_uart_info; |
| uint32_t clk_rate = 0U; |
| int result; |
| uint32_t boot_itf __unused; |
| uint32_t boot_instance __unused; |
| |
| result = dt_get_stdout_uart_info(&dt_uart_info); |
| |
| if ((result <= 0) || |
| (dt_uart_info.status == DT_DISABLED)) { |
| return -ENODEV; |
| } |
| |
| #if defined(IMAGE_BL2) |
| if ((dt_uart_info.clock < 0) || |
| (dt_uart_info.reset < 0)) { |
| return -ENODEV; |
| } |
| #endif |
| |
| #if STM32MP_UART_PROGRAMMER || !defined(IMAGE_BL2) |
| stm32_get_boot_interface(&boot_itf, &boot_instance); |
| |
| if ((boot_itf == BOOT_API_CTX_BOOT_INTERFACE_SEL_SERIAL_UART) && |
| (get_uart_address(boot_instance) == dt_uart_info.base)) { |
| return -EACCES; |
| } |
| #endif |
| |
| #if defined(IMAGE_BL2) |
| if (dt_set_stdout_pinctrl() != 0) { |
| return -ENODEV; |
| } |
| |
| clk_enable((unsigned long)dt_uart_info.clock); |
| |
| reset_uart((uint32_t)dt_uart_info.reset); |
| |
| clk_rate = clk_get_rate((unsigned long)dt_uart_info.clock); |
| #endif |
| |
| set_console(dt_uart_info.base, clk_rate); |
| |
| return 0; |
| } |
| |
| #if STM32MP_EARLY_CONSOLE |
| void stm32mp_setup_early_console(void) |
| { |
| #if defined(IMAGE_BL2) || STM32MP_RECONFIGURE_CONSOLE |
| plat_crash_console_init(); |
| #endif |
| set_console(STM32MP_DEBUG_USART_BASE, STM32MP_DEBUG_USART_CLK_FRQ); |
| NOTICE("Early console setup\n"); |
| } |
| #endif /* STM32MP_EARLY_CONSOLE */ |
| |
| /***************************************************************************** |
| * plat_is_smccc_feature_available() - This function checks whether SMCCC |
| * feature is availabile for platform. |
| * @fid: SMCCC function id |
| * |
| * Return SMC_ARCH_CALL_SUCCESS if SMCCC feature is available and |
| * SMC_ARCH_CALL_NOT_SUPPORTED otherwise. |
| *****************************************************************************/ |
| int32_t plat_is_smccc_feature_available(u_register_t fid) |
| { |
| switch (fid) { |
| case SMCCC_ARCH_SOC_ID: |
| return SMC_ARCH_CALL_SUCCESS; |
| default: |
| return SMC_ARCH_CALL_NOT_SUPPORTED; |
| } |
| } |
| |
| /* Get SOC version */ |
| int32_t plat_get_soc_version(void) |
| { |
| uint32_t chip_id = stm32mp_get_chip_dev_id(); |
| uint32_t manfid = SOC_ID_SET_JEP_106(JEDEC_ST_BKID, JEDEC_ST_MFID); |
| |
| return (int32_t)(manfid | (chip_id & SOC_ID_IMPL_DEF_MASK)); |
| } |
| |
| /* Get SOC revision */ |
| int32_t plat_get_soc_revision(void) |
| { |
| return (int32_t)(stm32mp_get_chip_version() & SOC_ID_REV_MASK); |
| } |
| |
| void stm32_display_board_info(uint32_t board_id) |
| { |
| char rev[2]; |
| |
| rev[0] = BOARD_ID2REV(board_id) - 1 + 'A'; |
| rev[1] = '\0'; |
| NOTICE("Board: MB%04x Var%u.%u Rev.%s-%02u\n", |
| BOARD_ID2NB(board_id), |
| BOARD_ID2VARCPN(board_id), |
| BOARD_ID2VARFG(board_id), |
| rev, |
| BOARD_ID2BOM(board_id)); |
| } |
| |
| void stm32_save_boot_info(boot_api_context_t *boot_context) |
| { |
| uint32_t auth_status; |
| |
| assert(boot_context->boot_interface_instance <= (BOOT_INST_MASK >> BOOT_INST_SHIFT)); |
| assert(boot_context->boot_interface_selected <= (BOOT_ITF_MASK >> BOOT_ITF_SHIFT)); |
| assert(boot_context->boot_partition_used_toboot <= (BOOT_PART_MASK >> BOOT_PART_SHIFT)); |
| |
| switch (boot_context->auth_status) { |
| case BOOT_API_CTX_AUTH_NO: |
| auth_status = 0x0U; |
| break; |
| |
| case BOOT_API_CTX_AUTH_SUCCESS: |
| auth_status = 0x2U; |
| break; |
| |
| case BOOT_API_CTX_AUTH_FAILED: |
| default: |
| auth_status = 0x1U; |
| break; |
| } |
| |
| clk_enable(TAMP_BKP_REG_CLK); |
| |
| mmio_clrsetbits_32(stm32_get_bkpr_boot_mode_addr(), |
| BOOT_ITF_MASK | BOOT_INST_MASK | BOOT_PART_MASK | BOOT_AUTH_MASK, |
| (boot_context->boot_interface_instance << BOOT_INST_SHIFT) | |
| (boot_context->boot_interface_selected << BOOT_ITF_SHIFT) | |
| (boot_context->boot_partition_used_toboot << BOOT_PART_SHIFT) | |
| (auth_status << BOOT_AUTH_SHIFT)); |
| |
| clk_disable(TAMP_BKP_REG_CLK); |
| } |
| |
| void stm32_get_boot_interface(uint32_t *interface, uint32_t *instance) |
| { |
| static uint32_t itf; |
| |
| if (itf == 0U) { |
| clk_enable(TAMP_BKP_REG_CLK); |
| |
| itf = mmio_read_32(stm32_get_bkpr_boot_mode_addr()) & |
| (BOOT_ITF_MASK | BOOT_INST_MASK); |
| |
| clk_disable(TAMP_BKP_REG_CLK); |
| } |
| |
| *interface = (itf & BOOT_ITF_MASK) >> BOOT_ITF_SHIFT; |
| *instance = (itf & BOOT_INST_MASK) >> BOOT_INST_SHIFT; |
| } |