plat/hisilicon/hikey/hikey_bl1_setup.c - filogic/atf - Gitiles

 /*
  * Copyright (c) 2017, ARM Limited and Contributors. All rights reserved.
  *
  * SPDX-License-Identifier: BSD-3-Clause
  */

 #include <arch_helpers.h>
 #include <assert.h>
 #include <bl_common.h>
 #include <console.h>
 #include <debug.h>
 #include <dw_mmc.h>
 #include <emmc.h>
 #include <errno.h>
 #include <gpio.h>
 #include <hi6220.h>
 #include <hi6553.h>
 #include <mmio.h>
 #include <pl061_gpio.h>
 #include <platform.h>
 #include <platform_def.h>
 #include <sp804_delay_timer.h>
 #include <string.h>
 #include <tbbr/tbbr_img_desc.h>

 #include "../../bl1/bl1_private.h"
 #include "hikey_def.h"
 #include "hikey_private.h"

 /*
  * Declarations of linker defined symbols which will help us find the layout
  * of trusted RAM
  */
 extern unsigned long __COHERENT_RAM_START__;
 extern unsigned long __COHERENT_RAM_END__;

 /*
  * The next 2 constants identify the extents of the coherent memory region.
  * These addresses are used by the MMU setup code and therefore they must be
  * page-aligned.  It is the responsibility of the linker script to ensure that
  * __COHERENT_RAM_START__ and __COHERENT_RAM_END__ linker symbols refer to
  * page-aligned addresses.
  */
 #define BL1_COHERENT_RAM_BASE (unsigned long)(&__COHERENT_RAM_START__)
 #define BL1_COHERENT_RAM_LIMIT (unsigned long)(&__COHERENT_RAM_END__)

 /* Data structure which holds the extents of the trusted RAM for BL1 */
 static meminfo_t bl1_tzram_layout;

 enum {
 	BOOT_NORMAL = 0,
 	BOOT_USB_DOWNLOAD,
 	BOOT_UART_DOWNLOAD,
 };

 meminfo_t *bl1_plat_sec_mem_layout(void)
 {
 	return &bl1_tzram_layout;
 }

 #if LOAD_IMAGE_V2
 /*******************************************************************************
  * Function that takes a memory layout into which BL2 has been loaded and
  * populates a new memory layout for BL2 that ensures that BL1's data sections
  * resident in secure RAM are not visible to BL2.
  ******************************************************************************/
 void bl1_init_bl2_mem_layout(const meminfo_t *bl1_mem_layout,
 			     meminfo_t *bl2_mem_layout)
 {

 	assert(bl1_mem_layout != NULL);
 	assert(bl2_mem_layout != NULL);

 	/*
 	 * Cannot remove BL1 RW data from the scope of memory visible to BL2
 	 * like arm platforms because they overlap in hikey
 	 */
 	bl2_mem_layout->total_base = BL2_BASE;
 	bl2_mem_layout->total_size = BL32_SRAM_LIMIT - BL2_BASE;

 	flush_dcache_range((unsigned long)bl2_mem_layout, sizeof(meminfo_t));
 }
 #endif /* LOAD_IMAGE_V2 */

 /*
  * Perform any BL1 specific platform actions.
  */
 void bl1_early_platform_setup(void)
 {
 	/* Initialize the console to provide early debug support */
 	console_init(CONSOLE_BASE, PL011_UART_CLK_IN_HZ, PL011_BAUDRATE);

 	/* Allow BL1 to see the whole Trusted RAM */
 	bl1_tzram_layout.total_base = BL1_RW_BASE;
 	bl1_tzram_layout.total_size = BL1_RW_SIZE;

 #if !LOAD_IMAGE_V2
 	/* Calculate how much RAM BL1 is using and how much remains free */
 	bl1_tzram_layout.free_base = BL1_RW_BASE;
 	bl1_tzram_layout.free_size = BL1_RW_SIZE;
 	reserve_mem(&bl1_tzram_layout.free_base,
 		    &bl1_tzram_layout.free_size,
 		    BL1_RAM_BASE,
 		    BL1_RAM_LIMIT - BL1_RAM_BASE); /* bl1_size */
 #endif

 	INFO("BL1: 0x%lx - 0x%lx [size = %lu]\n", BL1_RAM_BASE, BL1_RAM_LIMIT,
 	     BL1_RAM_LIMIT - BL1_RAM_BASE); /* bl1_size */
 }

 /*
  * Perform the very early platform specific architecture setup here. At the
  * moment this only does basic initialization. Later architectural setup
  * (bl1_arch_setup()) does not do anything platform specific.
  */
 void bl1_plat_arch_setup(void)
 {
 	hikey_init_mmu_el3(bl1_tzram_layout.total_base,
 			   bl1_tzram_layout.total_size,
 			   BL1_RO_BASE,
 			   BL1_RO_LIMIT,
 			   BL1_COHERENT_RAM_BASE,
 			   BL1_COHERENT_RAM_LIMIT);
 }

 static void hikey_sp804_init(void)
 {
 	uint32_t data;

 	/* select the clock of dual timer0 */
 	data = mmio_read_32(AO_SC_TIMER_EN0);
 	while (data & 3) {
 		data &= ~3;
 		data |= 3 << 16;
 		mmio_write_32(AO_SC_TIMER_EN0, data);
 		data = mmio_read_32(AO_SC_TIMER_EN0);
 	}
 	/* enable the pclk of dual timer0 */
 	data = mmio_read_32(AO_SC_PERIPH_CLKSTAT4);
 	while (!(data & PCLK_TIMER1) || !(data & PCLK_TIMER0)) {
 		mmio_write_32(AO_SC_PERIPH_CLKEN4, PCLK_TIMER1 | PCLK_TIMER0);
 		data = mmio_read_32(AO_SC_PERIPH_CLKSTAT4);
 	}
 	/* reset dual timer0 */
 	data = mmio_read_32(AO_SC_PERIPH_RSTSTAT4);
 	mmio_write_32(AO_SC_PERIPH_RSTEN4, PCLK_TIMER1 | PCLK_TIMER0);
 	do {
 		data = mmio_read_32(AO_SC_PERIPH_RSTSTAT4);
 	} while (!(data & PCLK_TIMER1) || !(data & PCLK_TIMER0));
 	/* unreset dual timer0 */
 	mmio_write_32(AO_SC_PERIPH_RSTDIS4, PCLK_TIMER1 | PCLK_TIMER0);
 	do {
 		data = mmio_read_32(AO_SC_PERIPH_RSTSTAT4);
 	} while ((data & PCLK_TIMER1) || (data & PCLK_TIMER0));

 	sp804_timer_init(SP804_TIMER0_BASE, 10, 192);
 }

 static void hikey_gpio_init(void)
 {
 	pl061_gpio_init();
 	pl061_gpio_register(GPIO0_BASE, 0);
 	pl061_gpio_register(GPIO1_BASE, 1);
 	pl061_gpio_register(GPIO2_BASE, 2);
 	pl061_gpio_register(GPIO3_BASE, 3);
 	pl061_gpio_register(GPIO4_BASE, 4);
 	pl061_gpio_register(GPIO5_BASE, 5);
 	pl061_gpio_register(GPIO6_BASE, 6);
 	pl061_gpio_register(GPIO7_BASE, 7);
 	pl061_gpio_register(GPIO8_BASE, 8);
 	pl061_gpio_register(GPIO9_BASE, 9);
 	pl061_gpio_register(GPIO10_BASE, 10);
 	pl061_gpio_register(GPIO11_BASE, 11);
 	pl061_gpio_register(GPIO12_BASE, 12);
 	pl061_gpio_register(GPIO13_BASE, 13);
 	pl061_gpio_register(GPIO14_BASE, 14);
 	pl061_gpio_register(GPIO15_BASE, 15);
 	pl061_gpio_register(GPIO16_BASE, 16);
 	pl061_gpio_register(GPIO17_BASE, 17);
 	pl061_gpio_register(GPIO18_BASE, 18);
 	pl061_gpio_register(GPIO19_BASE, 19);

 	/* Power on indicator LED (USER_LED1). */
 	gpio_set_direction(32, GPIO_DIR_OUT);	/* LED1 */
 	gpio_set_value(32, GPIO_LEVEL_HIGH);
 	gpio_set_direction(33, GPIO_DIR_OUT);	/* LED2 */
 	gpio_set_value(33, GPIO_LEVEL_LOW);
 	gpio_set_direction(34, GPIO_DIR_OUT);	/* LED3 */
 	gpio_set_direction(35, GPIO_DIR_OUT);	/* LED4 */
 }

 static void hikey_pmussi_init(void)
 {
 	uint32_t data;

 	/* Initialize PWR_HOLD GPIO */
 	gpio_set_direction(0, GPIO_DIR_OUT);
 	gpio_set_value(0, GPIO_LEVEL_LOW);

 	/*
 	 * After reset, PMUSSI stays in reset mode.
 	 * Now make it out of reset.
 	 */
 	mmio_write_32(AO_SC_PERIPH_RSTDIS4,
 		      AO_SC_PERIPH_RSTDIS4_PRESET_PMUSSI_N);
 	do {
 		data = mmio_read_32(AO_SC_PERIPH_RSTSTAT4);
 	} while (data & AO_SC_PERIPH_RSTDIS4_PRESET_PMUSSI_N);

 	/* Set PMUSSI clock latency for read operation. */
 	data = mmio_read_32(AO_SC_MCU_SUBSYS_CTRL3);
 	data &= ~AO_SC_MCU_SUBSYS_CTRL3_RCLK_MASK;
 	data |= AO_SC_MCU_SUBSYS_CTRL3_RCLK_3;
 	mmio_write_32(AO_SC_MCU_SUBSYS_CTRL3, data);

 	/* enable PMUSSI clock */
 	data = AO_SC_PERIPH_CLKEN5_PCLK_PMUSSI_CCPU |
 	       AO_SC_PERIPH_CLKEN5_PCLK_PMUSSI_MCU;
 	mmio_write_32(AO_SC_PERIPH_CLKEN5, data);
 	data = AO_SC_PERIPH_CLKEN4_PCLK_PMUSSI;
 	mmio_write_32(AO_SC_PERIPH_CLKEN4, data);

 	gpio_set_value(0, GPIO_LEVEL_HIGH);
 }

 static void hikey_hi6553_init(void)
 {
 	uint8_t data;

 	mmio_write_8(HI6553_PERI_EN_MARK, 0x1e);
 	mmio_write_8(HI6553_NP_REG_ADJ1, 0);
 	data = DISABLE6_XO_CLK_CONN | DISABLE6_XO_CLK_NFC |
 		DISABLE6_XO_CLK_RF1 | DISABLE6_XO_CLK_RF2;
 	mmio_write_8(HI6553_DISABLE6_XO_CLK, data);

 	/* configure BUCK0 & BUCK1 */
 	mmio_write_8(HI6553_BUCK01_CTRL2, 0x5e);
 	mmio_write_8(HI6553_BUCK0_CTRL7, 0x10);
 	mmio_write_8(HI6553_BUCK1_CTRL7, 0x10);
 	mmio_write_8(HI6553_BUCK0_CTRL5, 0x1e);
 	mmio_write_8(HI6553_BUCK1_CTRL5, 0x1e);
 	mmio_write_8(HI6553_BUCK0_CTRL1, 0xfc);
 	mmio_write_8(HI6553_BUCK1_CTRL1, 0xfc);

 	/* configure BUCK2 */
 	mmio_write_8(HI6553_BUCK2_REG1, 0x4f);
 	mmio_write_8(HI6553_BUCK2_REG5, 0x99);
 	mmio_write_8(HI6553_BUCK2_REG6, 0x45);
 	mdelay(1);
 	mmio_write_8(HI6553_VSET_BUCK2_ADJ, 0x22);
 	mdelay(1);

 	/* configure BUCK3 */
 	mmio_write_8(HI6553_BUCK3_REG3, 0x02);
 	mmio_write_8(HI6553_BUCK3_REG5, 0x99);
 	mmio_write_8(HI6553_BUCK3_REG6, 0x41);
 	mmio_write_8(HI6553_VSET_BUCK3_ADJ, 0x02);
 	mdelay(1);

 	/* configure BUCK4 */
 	mmio_write_8(HI6553_BUCK4_REG2, 0x9a);
 	mmio_write_8(HI6553_BUCK4_REG5, 0x99);
 	mmio_write_8(HI6553_BUCK4_REG6, 0x45);

 	/* configure LDO20 */
 	mmio_write_8(HI6553_LDO20_REG_ADJ, 0x50);

 	mmio_write_8(HI6553_NP_REG_CHG, 0x0f);
 	mmio_write_8(HI6553_CLK_TOP0, 0x06);
 	mmio_write_8(HI6553_CLK_TOP3, 0xc0);
 	mmio_write_8(HI6553_CLK_TOP4, 0x00);

 	/* configure LDO7 & LDO10 for SD slot */
 	/* enable LDO7 */
 	data = mmio_read_8(HI6553_LDO7_REG_ADJ);
 	data = (data & 0xf8) | 0x2;
 	mmio_write_8(HI6553_LDO7_REG_ADJ, data);
 	mdelay(5);
 	mmio_write_8(HI6553_ENABLE2_LDO1_8, 1 << 6);
 	mdelay(5);
 	/* enable LDO10 */
 	data = mmio_read_8(HI6553_LDO10_REG_ADJ);
 	data = (data & 0xf8) | 0x5;
 	mmio_write_8(HI6553_LDO10_REG_ADJ, data);
 	mdelay(5);
 	mmio_write_8(HI6553_ENABLE3_LDO9_16, 1 << 1);
 	mdelay(5);
 	/* enable LDO15 */
 	data = mmio_read_8(HI6553_LDO15_REG_ADJ);
 	data = (data & 0xf8) | 0x4;
 	mmio_write_8(HI6553_LDO15_REG_ADJ, data);
 	mmio_write_8(HI6553_ENABLE3_LDO9_16, 1 << 6);
 	mdelay(5);
 	/* enable LDO19 */
 	data = mmio_read_8(HI6553_LDO19_REG_ADJ);
 	data |= 0x7;
 	mmio_write_8(HI6553_LDO19_REG_ADJ, data);
 	mmio_write_8(HI6553_ENABLE4_LDO17_22, 1 << 2);
 	mdelay(5);
 	/* enable LDO21 */
 	data = mmio_read_8(HI6553_LDO21_REG_ADJ);
 	data = (data & 0xf8) | 0x3;
 	mmio_write_8(HI6553_LDO21_REG_ADJ, data);
 	mmio_write_8(HI6553_ENABLE4_LDO17_22, 1 << 4);
 	mdelay(5);
 	/* enable LDO22 */
 	data = mmio_read_8(HI6553_LDO22_REG_ADJ);
 	data = (data & 0xf8) | 0x7;
 	mmio_write_8(HI6553_LDO22_REG_ADJ, data);
 	mmio_write_8(HI6553_ENABLE4_LDO17_22, 1 << 5);
 	mdelay(5);

 	/* select 32.764KHz */
 	mmio_write_8(HI6553_CLK19M2_600_586_EN, 0x01);

 	/* Disable vbus_det interrupts */
 	data = mmio_read_8(HI6553_IRQ2_MASK);
 	data = data | 0x3;
 	mmio_write_8(HI6553_IRQ2_MASK, data);
 }

 static void init_mmc0_pll(void)
 {
 	unsigned int data;

 	/* select SYSPLL as the source of MMC0 */
 	/* select SYSPLL as the source of MUX1 (SC_CLK_SEL0) */
 	mmio_write_32(PERI_SC_CLK_SEL0, 1 << 5 | 1 << 21);
 	do {
 		data = mmio_read_32(PERI_SC_CLK_SEL0);
 	} while (!(data & (1 << 5)));
 	/* select MUX1 as the source of MUX2 (SC_CLK_SEL0) */
 	mmio_write_32(PERI_SC_CLK_SEL0, 1 << 29);
 	do {
 		data = mmio_read_32(PERI_SC_CLK_SEL0);
 	} while (data & (1 << 13));

 	mmio_write_32(PERI_SC_PERIPH_CLKEN0, (1 << 0));
 	do {
 		data = mmio_read_32(PERI_SC_PERIPH_CLKSTAT0);
 	} while (!(data & (1 << 0)));

 	data = mmio_read_32(PERI_SC_PERIPH_CLKEN12);
 	data |= 1 << 1;
 	mmio_write_32(PERI_SC_PERIPH_CLKEN12, data);

 	do {
 		mmio_write_32(PERI_SC_CLKCFG8BIT1, (1 << 7) | 0xb);
 		data = mmio_read_32(PERI_SC_CLKCFG8BIT1);
 	} while ((data & 0xb) != 0xb);
 }

 static void reset_mmc0_clk(void)
 {
 	unsigned int data;

 	/* disable mmc0 bus clock */
 	mmio_write_32(PERI_SC_PERIPH_CLKDIS0, PERI_CLK0_MMC0);
 	do {
 		data = mmio_read_32(PERI_SC_PERIPH_CLKSTAT0);
 	} while (data & PERI_CLK0_MMC0);
 	/* enable mmc0 bus clock */
 	mmio_write_32(PERI_SC_PERIPH_CLKEN0, PERI_CLK0_MMC0);
 	do {
 		data = mmio_read_32(PERI_SC_PERIPH_CLKSTAT0);
 	} while (!(data & PERI_CLK0_MMC0));
 	/* reset mmc0 clock domain */
 	mmio_write_32(PERI_SC_PERIPH_RSTEN0, PERI_RST0_MMC0);

 	/* bypass mmc0 clock phase */
 	data = mmio_read_32(PERI_SC_PERIPH_CTRL2);
 	data |= 3;
 	mmio_write_32(PERI_SC_PERIPH_CTRL2, data);

 	/* disable low power */
 	data = mmio_read_32(PERI_SC_PERIPH_CTRL13);
 	data |= 1 << 3;
 	mmio_write_32(PERI_SC_PERIPH_CTRL13, data);
 	do {
 		data = mmio_read_32(PERI_SC_PERIPH_RSTSTAT0);
 	} while (!(data & PERI_RST0_MMC0));

 	/* unreset mmc0 clock domain */
 	mmio_write_32(PERI_SC_PERIPH_RSTDIS0, PERI_RST0_MMC0);
 	do {
 		data = mmio_read_32(PERI_SC_PERIPH_RSTSTAT0);
 	} while (data & PERI_RST0_MMC0);
 }

 static void init_media_clk(void)
 {
 	unsigned int data, value;

 	data = mmio_read_32(PMCTRL_MEDPLLCTRL);
 	data |= 1;
 	mmio_write_32(PMCTRL_MEDPLLCTRL, data);

 	for (;;) {
 		data = mmio_read_32(PMCTRL_MEDPLLCTRL);
 		value = 1 << 28;
 		if ((data & value) == value)
 			break;
 	}

 	data = mmio_read_32(PERI_SC_PERIPH_CLKEN12);
 	data = 1 << 10;
 	mmio_write_32(PERI_SC_PERIPH_CLKEN12, data);
 }

 static void init_mmc1_pll(void)
 {
 	uint32_t data;

 	/* select SYSPLL as the source of MMC1 */
 	/* select SYSPLL as the source of MUX1 (SC_CLK_SEL0) */
 	mmio_write_32(PERI_SC_CLK_SEL0, 1 << 11 | 1 << 27);
 	do {
 		data = mmio_read_32(PERI_SC_CLK_SEL0);
 	} while (!(data & (1 << 11)));
 	/* select MUX1 as the source of MUX2 (SC_CLK_SEL0) */
 	mmio_write_32(PERI_SC_CLK_SEL0, 1 << 30);
 	do {
 		data = mmio_read_32(PERI_SC_CLK_SEL0);
 	} while (data & (1 << 14));

 	mmio_write_32(PERI_SC_PERIPH_CLKEN0, (1 << 1));
 	do {
 		data = mmio_read_32(PERI_SC_PERIPH_CLKSTAT0);
 	} while (!(data & (1 << 1)));

 	data = mmio_read_32(PERI_SC_PERIPH_CLKEN12);
 	data |= 1 << 2;
 	mmio_write_32(PERI_SC_PERIPH_CLKEN12, data);

 	do {
 		/* 1.2GHz / 50 = 24MHz */
 		mmio_write_32(PERI_SC_CLKCFG8BIT2, 0x31 | (1 << 7));
 		data = mmio_read_32(PERI_SC_CLKCFG8BIT2);
 	} while ((data & 0x31) != 0x31);
 }

 static void reset_mmc1_clk(void)
 {
 	unsigned int data;

 	/* disable mmc1 bus clock */
 	mmio_write_32(PERI_SC_PERIPH_CLKDIS0, PERI_CLK0_MMC1);
 	do {
 		data = mmio_read_32(PERI_SC_PERIPH_CLKSTAT0);
 	} while (data & PERI_CLK0_MMC1);
 	/* enable mmc1 bus clock */
 	mmio_write_32(PERI_SC_PERIPH_CLKEN0, PERI_CLK0_MMC1);
 	do {
 		data = mmio_read_32(PERI_SC_PERIPH_CLKSTAT0);
 	} while (!(data & PERI_CLK0_MMC1));
 	/* reset mmc1 clock domain */
 	mmio_write_32(PERI_SC_PERIPH_RSTEN0, PERI_RST0_MMC1);

 	/* bypass mmc1 clock phase */
 	data = mmio_read_32(PERI_SC_PERIPH_CTRL2);
 	data |= 3 << 2;
 	mmio_write_32(PERI_SC_PERIPH_CTRL2, data);

 	/* disable low power */
 	data = mmio_read_32(PERI_SC_PERIPH_CTRL13);
 	data |= 1 << 4;
 	mmio_write_32(PERI_SC_PERIPH_CTRL13, data);
 	do {
 		data = mmio_read_32(PERI_SC_PERIPH_RSTSTAT0);
 	} while (!(data & PERI_RST0_MMC1));

 	/* unreset mmc0 clock domain */
 	mmio_write_32(PERI_SC_PERIPH_RSTDIS0, PERI_RST0_MMC1);
 	do {
 		data = mmio_read_32(PERI_SC_PERIPH_RSTSTAT0);
 	} while (data & PERI_RST0_MMC1);
 }

 /* Initialize PLL of both eMMC and SD controllers. */
 static void hikey_mmc_pll_init(void)
 {
 	init_mmc0_pll();
 	reset_mmc0_clk();
 	init_media_clk();

 	dsb();

 	init_mmc1_pll();
 	reset_mmc1_clk();
 }

 static void hikey_rtc_init(void)
 {
 	uint32_t data;

 	data = mmio_read_32(AO_SC_PERIPH_CLKEN4);
 	data |= AO_SC_PERIPH_RSTDIS4_RESET_RTC0_N;
 	mmio_write_32(AO_SC_PERIPH_CLKEN4, data);
 }

 /*
  * Function which will perform any remaining platform-specific setup that can
  * occur after the MMU and data cache have been enabled.
  */
 void bl1_platform_setup(void)
 {
 	dw_mmc_params_t params;

 	assert((HIKEY_BL1_MMC_DESC_BASE >= SRAM_BASE) &&
 	       ((SRAM_BASE + SRAM_SIZE) >=
 		(HIKEY_BL1_MMC_DATA_BASE + HIKEY_BL1_MMC_DATA_SIZE)));
 	hikey_sp804_init();
 	hikey_gpio_init();
 	hikey_pmussi_init();
 	hikey_hi6553_init();

 	hikey_rtc_init();

 	hikey_mmc_pll_init();

 	memset(&params, 0, sizeof(dw_mmc_params_t));
 	params.reg_base = DWMMC0_BASE;
 	params.desc_base = HIKEY_BL1_MMC_DESC_BASE;
 	params.desc_size = 1 << 20;
 	params.clk_rate = 24 * 1000 * 1000;
 	params.bus_width = EMMC_BUS_WIDTH_8;
 	params.flags = EMMC_FLAG_CMD23;
 	dw_mmc_init(&params);

 	hikey_io_setup();
 }

 /*
  * The following function checks if Firmware update is needed,
  * by checking if TOC in FIP image is valid or not.
  */
 unsigned int bl1_plat_get_next_image_id(void)
 {
 	int32_t boot_mode;
 	unsigned int ret;

 	boot_mode = mmio_read_32(ONCHIPROM_PARAM_BASE);
 	switch (boot_mode) {
 	case BOOT_NORMAL:
 		ret = BL2_IMAGE_ID;
 		break;
 	case BOOT_USB_DOWNLOAD:
 	case BOOT_UART_DOWNLOAD:
 		ret = NS_BL1U_IMAGE_ID;
 		break;
 	default:
 		WARN("Invalid boot mode is found:%d\n", boot_mode);
 		panic();
 	}
 	return ret;
 }

 image_desc_t *bl1_plat_get_image_desc(unsigned int image_id)
 {
 	unsigned int index = 0;

 	while (bl1_tbbr_image_descs[index].image_id != INVALID_IMAGE_ID) {
 		if (bl1_tbbr_image_descs[index].image_id == image_id)
 			return &bl1_tbbr_image_descs[index];

 		index++;
 	}

 	return NULL;
 }

 void bl1_plat_set_ep_info(unsigned int image_id,
 		entry_point_info_t *ep_info)
 {
 	unsigned int data = 0;

 	if (image_id == BL2_IMAGE_ID)
 		return;
 	inv_dcache_range(NS_BL1U_BASE, NS_BL1U_SIZE);
 	__asm__ volatile ("mrs	%0, cpacr_el1" : "=r"(data));
 	do {
 		data |= 3 << 20;
 		__asm__ volatile ("msr	cpacr_el1, %0" : : "r"(data));
 		__asm__ volatile ("mrs	%0, cpacr_el1" : "=r"(data));
 	} while ((data & (3 << 20)) != (3 << 20));
 	INFO("cpacr_el1:0x%x\n", data);

 	ep_info->args.arg0 = 0xffff & read_mpidr();
 	ep_info->spsr = SPSR_64(MODE_EL1, MODE_SP_ELX,
 				DISABLE_ALL_EXCEPTIONS);
 }
	/*
	* Copyright (c) 2017, ARM Limited and Contributors. All rights reserved.
	*
	* SPDX-License-Identifier: BSD-3-Clause
	*/

	#include <arch_helpers.h>
	#include <assert.h>
	#include <bl_common.h>
	#include <console.h>
	#include <debug.h>
	#include <dw_mmc.h>
	#include <emmc.h>
	#include <errno.h>
	#include <gpio.h>
	#include <hi6220.h>
	#include <hi6553.h>
	#include <mmio.h>
	#include <pl061_gpio.h>
	#include <platform.h>
	#include <platform_def.h>
	#include <sp804_delay_timer.h>
	#include <string.h>
	#include <tbbr/tbbr_img_desc.h>

	#include "../../bl1/bl1_private.h"
	#include "hikey_def.h"
	#include "hikey_private.h"

	/*
	* Declarations of linker defined symbols which will help us find the layout
	* of trusted RAM
	*/
	extern unsigned long __COHERENT_RAM_START__;
	extern unsigned long __COHERENT_RAM_END__;

	/*
	* The next 2 constants identify the extents of the coherent memory region.
	* These addresses are used by the MMU setup code and therefore they must be
	* page-aligned. It is the responsibility of the linker script to ensure that
	* __COHERENT_RAM_START__ and __COHERENT_RAM_END__ linker symbols refer to
	* page-aligned addresses.
	*/
	#define BL1_COHERENT_RAM_BASE (unsigned long)(&__COHERENT_RAM_START__)
	#define BL1_COHERENT_RAM_LIMIT (unsigned long)(&__COHERENT_RAM_END__)

	/* Data structure which holds the extents of the trusted RAM for BL1 */
	static meminfo_t bl1_tzram_layout;

	enum {
	BOOT_NORMAL = 0,
	BOOT_USB_DOWNLOAD,
	BOOT_UART_DOWNLOAD,
	};

	meminfo_t *bl1_plat_sec_mem_layout(void)
	{
	return &bl1_tzram_layout;
	}

	#if LOAD_IMAGE_V2
	/*******************************************************************************
	* Function that takes a memory layout into which BL2 has been loaded and
	* populates a new memory layout for BL2 that ensures that BL1's data sections
	* resident in secure RAM are not visible to BL2.
	******************************************************************************/
	void bl1_init_bl2_mem_layout(const meminfo_t *bl1_mem_layout,
	meminfo_t *bl2_mem_layout)
	{

	assert(bl1_mem_layout != NULL);
	assert(bl2_mem_layout != NULL);

	/*
	* Cannot remove BL1 RW data from the scope of memory visible to BL2
	* like arm platforms because they overlap in hikey
	*/
	bl2_mem_layout->total_base = BL2_BASE;
	bl2_mem_layout->total_size = BL32_SRAM_LIMIT - BL2_BASE;

	flush_dcache_range((unsigned long)bl2_mem_layout, sizeof(meminfo_t));
	}
	#endif /* LOAD_IMAGE_V2 */

	/*
	* Perform any BL1 specific platform actions.
	*/
	void bl1_early_platform_setup(void)
	{
	/* Initialize the console to provide early debug support */
	console_init(CONSOLE_BASE, PL011_UART_CLK_IN_HZ, PL011_BAUDRATE);

	/* Allow BL1 to see the whole Trusted RAM */
	bl1_tzram_layout.total_base = BL1_RW_BASE;
	bl1_tzram_layout.total_size = BL1_RW_SIZE;

	#if !LOAD_IMAGE_V2
	/* Calculate how much RAM BL1 is using and how much remains free */
	bl1_tzram_layout.free_base = BL1_RW_BASE;
	bl1_tzram_layout.free_size = BL1_RW_SIZE;
	reserve_mem(&bl1_tzram_layout.free_base,
	&bl1_tzram_layout.free_size,
	BL1_RAM_BASE,
	BL1_RAM_LIMIT - BL1_RAM_BASE); /* bl1_size */
	#endif

	INFO("BL1: 0x%lx - 0x%lx [size = %lu]\n", BL1_RAM_BASE, BL1_RAM_LIMIT,
	BL1_RAM_LIMIT - BL1_RAM_BASE); /* bl1_size */
	}

	/*
	* Perform the very early platform specific architecture setup here. At the
	* moment this only does basic initialization. Later architectural setup
	* (bl1_arch_setup()) does not do anything platform specific.
	*/
	void bl1_plat_arch_setup(void)
	{
	hikey_init_mmu_el3(bl1_tzram_layout.total_base,
	bl1_tzram_layout.total_size,
	BL1_RO_BASE,
	BL1_RO_LIMIT,
	BL1_COHERENT_RAM_BASE,
	BL1_COHERENT_RAM_LIMIT);
	}

	static void hikey_sp804_init(void)
	{
	uint32_t data;

	/* select the clock of dual timer0 */
	data = mmio_read_32(AO_SC_TIMER_EN0);
	while (data & 3) {
	data &= ~3;
	data \|= 3 << 16;
	mmio_write_32(AO_SC_TIMER_EN0, data);
	data = mmio_read_32(AO_SC_TIMER_EN0);
	}
	/* enable the pclk of dual timer0 */
	data = mmio_read_32(AO_SC_PERIPH_CLKSTAT4);
	while (!(data & PCLK_TIMER1) \|\| !(data & PCLK_TIMER0)) {
	mmio_write_32(AO_SC_PERIPH_CLKEN4, PCLK_TIMER1 \| PCLK_TIMER0);
	data = mmio_read_32(AO_SC_PERIPH_CLKSTAT4);
	}
	/* reset dual timer0 */
	data = mmio_read_32(AO_SC_PERIPH_RSTSTAT4);
	mmio_write_32(AO_SC_PERIPH_RSTEN4, PCLK_TIMER1 \| PCLK_TIMER0);
	do {
	data = mmio_read_32(AO_SC_PERIPH_RSTSTAT4);
	} while (!(data & PCLK_TIMER1) \|\| !(data & PCLK_TIMER0));
	/* unreset dual timer0 */
	mmio_write_32(AO_SC_PERIPH_RSTDIS4, PCLK_TIMER1 \| PCLK_TIMER0);
	do {
	data = mmio_read_32(AO_SC_PERIPH_RSTSTAT4);
	} while ((data & PCLK_TIMER1) \|\| (data & PCLK_TIMER0));

	sp804_timer_init(SP804_TIMER0_BASE, 10, 192);
	}

	static void hikey_gpio_init(void)
	{
	pl061_gpio_init();
	pl061_gpio_register(GPIO0_BASE, 0);
	pl061_gpio_register(GPIO1_BASE, 1);
	pl061_gpio_register(GPIO2_BASE, 2);
	pl061_gpio_register(GPIO3_BASE, 3);
	pl061_gpio_register(GPIO4_BASE, 4);
	pl061_gpio_register(GPIO5_BASE, 5);
	pl061_gpio_register(GPIO6_BASE, 6);
	pl061_gpio_register(GPIO7_BASE, 7);
	pl061_gpio_register(GPIO8_BASE, 8);
	pl061_gpio_register(GPIO9_BASE, 9);
	pl061_gpio_register(GPIO10_BASE, 10);
	pl061_gpio_register(GPIO11_BASE, 11);
	pl061_gpio_register(GPIO12_BASE, 12);
	pl061_gpio_register(GPIO13_BASE, 13);
	pl061_gpio_register(GPIO14_BASE, 14);
	pl061_gpio_register(GPIO15_BASE, 15);
	pl061_gpio_register(GPIO16_BASE, 16);
	pl061_gpio_register(GPIO17_BASE, 17);
	pl061_gpio_register(GPIO18_BASE, 18);
	pl061_gpio_register(GPIO19_BASE, 19);

	/* Power on indicator LED (USER_LED1). */
	gpio_set_direction(32, GPIO_DIR_OUT); /* LED1 */
	gpio_set_value(32, GPIO_LEVEL_HIGH);
	gpio_set_direction(33, GPIO_DIR_OUT); /* LED2 */
	gpio_set_value(33, GPIO_LEVEL_LOW);
	gpio_set_direction(34, GPIO_DIR_OUT); /* LED3 */
	gpio_set_direction(35, GPIO_DIR_OUT); /* LED4 */
	}

	static void hikey_pmussi_init(void)
	{
	uint32_t data;

	/* Initialize PWR_HOLD GPIO */
	gpio_set_direction(0, GPIO_DIR_OUT);
	gpio_set_value(0, GPIO_LEVEL_LOW);

	/*
	* After reset, PMUSSI stays in reset mode.
	* Now make it out of reset.
	*/
	mmio_write_32(AO_SC_PERIPH_RSTDIS4,
	AO_SC_PERIPH_RSTDIS4_PRESET_PMUSSI_N);
	do {
	data = mmio_read_32(AO_SC_PERIPH_RSTSTAT4);
	} while (data & AO_SC_PERIPH_RSTDIS4_PRESET_PMUSSI_N);

	/* Set PMUSSI clock latency for read operation. */
	data = mmio_read_32(AO_SC_MCU_SUBSYS_CTRL3);
	data &= ~AO_SC_MCU_SUBSYS_CTRL3_RCLK_MASK;
	data \|= AO_SC_MCU_SUBSYS_CTRL3_RCLK_3;
	mmio_write_32(AO_SC_MCU_SUBSYS_CTRL3, data);

	/* enable PMUSSI clock */
	data = AO_SC_PERIPH_CLKEN5_PCLK_PMUSSI_CCPU \|
	AO_SC_PERIPH_CLKEN5_PCLK_PMUSSI_MCU;
	mmio_write_32(AO_SC_PERIPH_CLKEN5, data);
	data = AO_SC_PERIPH_CLKEN4_PCLK_PMUSSI;
	mmio_write_32(AO_SC_PERIPH_CLKEN4, data);

	gpio_set_value(0, GPIO_LEVEL_HIGH);
	}

	static void hikey_hi6553_init(void)
	{
	uint8_t data;

	mmio_write_8(HI6553_PERI_EN_MARK, 0x1e);
	mmio_write_8(HI6553_NP_REG_ADJ1, 0);
	data = DISABLE6_XO_CLK_CONN \| DISABLE6_XO_CLK_NFC \|
	DISABLE6_XO_CLK_RF1 \| DISABLE6_XO_CLK_RF2;
	mmio_write_8(HI6553_DISABLE6_XO_CLK, data);

	/* configure BUCK0 & BUCK1 */
	mmio_write_8(HI6553_BUCK01_CTRL2, 0x5e);
	mmio_write_8(HI6553_BUCK0_CTRL7, 0x10);
	mmio_write_8(HI6553_BUCK1_CTRL7, 0x10);
	mmio_write_8(HI6553_BUCK0_CTRL5, 0x1e);
	mmio_write_8(HI6553_BUCK1_CTRL5, 0x1e);
	mmio_write_8(HI6553_BUCK0_CTRL1, 0xfc);
	mmio_write_8(HI6553_BUCK1_CTRL1, 0xfc);

	/* configure BUCK2 */
	mmio_write_8(HI6553_BUCK2_REG1, 0x4f);
	mmio_write_8(HI6553_BUCK2_REG5, 0x99);
	mmio_write_8(HI6553_BUCK2_REG6, 0x45);
	mdelay(1);
	mmio_write_8(HI6553_VSET_BUCK2_ADJ, 0x22);
	mdelay(1);

	/* configure BUCK3 */
	mmio_write_8(HI6553_BUCK3_REG3, 0x02);
	mmio_write_8(HI6553_BUCK3_REG5, 0x99);
	mmio_write_8(HI6553_BUCK3_REG6, 0x41);
	mmio_write_8(HI6553_VSET_BUCK3_ADJ, 0x02);
	mdelay(1);

	/* configure BUCK4 */
	mmio_write_8(HI6553_BUCK4_REG2, 0x9a);
	mmio_write_8(HI6553_BUCK4_REG5, 0x99);
	mmio_write_8(HI6553_BUCK4_REG6, 0x45);

	/* configure LDO20 */
	mmio_write_8(HI6553_LDO20_REG_ADJ, 0x50);

	mmio_write_8(HI6553_NP_REG_CHG, 0x0f);
	mmio_write_8(HI6553_CLK_TOP0, 0x06);
	mmio_write_8(HI6553_CLK_TOP3, 0xc0);
	mmio_write_8(HI6553_CLK_TOP4, 0x00);

	/* configure LDO7 & LDO10 for SD slot */
	/* enable LDO7 */
	data = mmio_read_8(HI6553_LDO7_REG_ADJ);
	data = (data & 0xf8) \| 0x2;
	mmio_write_8(HI6553_LDO7_REG_ADJ, data);
	mdelay(5);
	mmio_write_8(HI6553_ENABLE2_LDO1_8, 1 << 6);
	mdelay(5);
	/* enable LDO10 */
	data = mmio_read_8(HI6553_LDO10_REG_ADJ);
	data = (data & 0xf8) \| 0x5;
	mmio_write_8(HI6553_LDO10_REG_ADJ, data);
	mdelay(5);
	mmio_write_8(HI6553_ENABLE3_LDO9_16, 1 << 1);
	mdelay(5);
	/* enable LDO15 */
	data = mmio_read_8(HI6553_LDO15_REG_ADJ);
	data = (data & 0xf8) \| 0x4;
	mmio_write_8(HI6553_LDO15_REG_ADJ, data);
	mmio_write_8(HI6553_ENABLE3_LDO9_16, 1 << 6);
	mdelay(5);
	/* enable LDO19 */
	data = mmio_read_8(HI6553_LDO19_REG_ADJ);
	data \|= 0x7;
	mmio_write_8(HI6553_LDO19_REG_ADJ, data);
	mmio_write_8(HI6553_ENABLE4_LDO17_22, 1 << 2);
	mdelay(5);
	/* enable LDO21 */
	data = mmio_read_8(HI6553_LDO21_REG_ADJ);
	data = (data & 0xf8) \| 0x3;
	mmio_write_8(HI6553_LDO21_REG_ADJ, data);
	mmio_write_8(HI6553_ENABLE4_LDO17_22, 1 << 4);
	mdelay(5);
	/* enable LDO22 */
	data = mmio_read_8(HI6553_LDO22_REG_ADJ);
	data = (data & 0xf8) \| 0x7;
	mmio_write_8(HI6553_LDO22_REG_ADJ, data);
	mmio_write_8(HI6553_ENABLE4_LDO17_22, 1 << 5);
	mdelay(5);

	/* select 32.764KHz */
	mmio_write_8(HI6553_CLK19M2_600_586_EN, 0x01);

	/* Disable vbus_det interrupts */
	data = mmio_read_8(HI6553_IRQ2_MASK);
	data = data \| 0x3;
	mmio_write_8(HI6553_IRQ2_MASK, data);
	}

	static void init_mmc0_pll(void)
	{
	unsigned int data;

	/* select SYSPLL as the source of MMC0 */
	/* select SYSPLL as the source of MUX1 (SC_CLK_SEL0) */
	mmio_write_32(PERI_SC_CLK_SEL0, 1 << 5 \| 1 << 21);
	do {
	data = mmio_read_32(PERI_SC_CLK_SEL0);
	} while (!(data & (1 << 5)));
	/* select MUX1 as the source of MUX2 (SC_CLK_SEL0) */
	mmio_write_32(PERI_SC_CLK_SEL0, 1 << 29);
	do {
	data = mmio_read_32(PERI_SC_CLK_SEL0);
	} while (data & (1 << 13));

	mmio_write_32(PERI_SC_PERIPH_CLKEN0, (1 << 0));
	do {
	data = mmio_read_32(PERI_SC_PERIPH_CLKSTAT0);
	} while (!(data & (1 << 0)));

	data = mmio_read_32(PERI_SC_PERIPH_CLKEN12);
	data \|= 1 << 1;
	mmio_write_32(PERI_SC_PERIPH_CLKEN12, data);

	do {
	mmio_write_32(PERI_SC_CLKCFG8BIT1, (1 << 7) \| 0xb);
	data = mmio_read_32(PERI_SC_CLKCFG8BIT1);
	} while ((data & 0xb) != 0xb);
	}

	static void reset_mmc0_clk(void)
	{
	unsigned int data;

	/* disable mmc0 bus clock */
	mmio_write_32(PERI_SC_PERIPH_CLKDIS0, PERI_CLK0_MMC0);
	do {
	data = mmio_read_32(PERI_SC_PERIPH_CLKSTAT0);
	} while (data & PERI_CLK0_MMC0);
	/* enable mmc0 bus clock */
	mmio_write_32(PERI_SC_PERIPH_CLKEN0, PERI_CLK0_MMC0);
	do {
	data = mmio_read_32(PERI_SC_PERIPH_CLKSTAT0);
	} while (!(data & PERI_CLK0_MMC0));
	/* reset mmc0 clock domain */
	mmio_write_32(PERI_SC_PERIPH_RSTEN0, PERI_RST0_MMC0);

	/* bypass mmc0 clock phase */
	data = mmio_read_32(PERI_SC_PERIPH_CTRL2);
	data \|= 3;
	mmio_write_32(PERI_SC_PERIPH_CTRL2, data);

	/* disable low power */
	data = mmio_read_32(PERI_SC_PERIPH_CTRL13);
	data \|= 1 << 3;
	mmio_write_32(PERI_SC_PERIPH_CTRL13, data);
	do {
	data = mmio_read_32(PERI_SC_PERIPH_RSTSTAT0);
	} while (!(data & PERI_RST0_MMC0));

	/* unreset mmc0 clock domain */
	mmio_write_32(PERI_SC_PERIPH_RSTDIS0, PERI_RST0_MMC0);
	do {
	data = mmio_read_32(PERI_SC_PERIPH_RSTSTAT0);
	} while (data & PERI_RST0_MMC0);
	}

	static void init_media_clk(void)
	{
	unsigned int data, value;

	data = mmio_read_32(PMCTRL_MEDPLLCTRL);
	data \|= 1;
	mmio_write_32(PMCTRL_MEDPLLCTRL, data);

	for (;;) {
	data = mmio_read_32(PMCTRL_MEDPLLCTRL);
	value = 1 << 28;
	if ((data & value) == value)
	break;
	}

	data = mmio_read_32(PERI_SC_PERIPH_CLKEN12);
	data = 1 << 10;
	mmio_write_32(PERI_SC_PERIPH_CLKEN12, data);
	}

	static void init_mmc1_pll(void)
	{
	uint32_t data;

	/* select SYSPLL as the source of MMC1 */
	/* select SYSPLL as the source of MUX1 (SC_CLK_SEL0) */
	mmio_write_32(PERI_SC_CLK_SEL0, 1 << 11 \| 1 << 27);
	do {
	data = mmio_read_32(PERI_SC_CLK_SEL0);
	} while (!(data & (1 << 11)));
	/* select MUX1 as the source of MUX2 (SC_CLK_SEL0) */
	mmio_write_32(PERI_SC_CLK_SEL0, 1 << 30);
	do {
	data = mmio_read_32(PERI_SC_CLK_SEL0);
	} while (data & (1 << 14));

	mmio_write_32(PERI_SC_PERIPH_CLKEN0, (1 << 1));
	do {
	data = mmio_read_32(PERI_SC_PERIPH_CLKSTAT0);
	} while (!(data & (1 << 1)));

	data = mmio_read_32(PERI_SC_PERIPH_CLKEN12);
	data \|= 1 << 2;
	mmio_write_32(PERI_SC_PERIPH_CLKEN12, data);

	do {
	/* 1.2GHz / 50 = 24MHz */
	mmio_write_32(PERI_SC_CLKCFG8BIT2, 0x31 \| (1 << 7));
	data = mmio_read_32(PERI_SC_CLKCFG8BIT2);
	} while ((data & 0x31) != 0x31);
	}

	static void reset_mmc1_clk(void)
	{
	unsigned int data;

	/* disable mmc1 bus clock */
	mmio_write_32(PERI_SC_PERIPH_CLKDIS0, PERI_CLK0_MMC1);
	do {
	data = mmio_read_32(PERI_SC_PERIPH_CLKSTAT0);
	} while (data & PERI_CLK0_MMC1);
	/* enable mmc1 bus clock */
	mmio_write_32(PERI_SC_PERIPH_CLKEN0, PERI_CLK0_MMC1);
	do {
	data = mmio_read_32(PERI_SC_PERIPH_CLKSTAT0);
	} while (!(data & PERI_CLK0_MMC1));
	/* reset mmc1 clock domain */
	mmio_write_32(PERI_SC_PERIPH_RSTEN0, PERI_RST0_MMC1);

	/* bypass mmc1 clock phase */
	data = mmio_read_32(PERI_SC_PERIPH_CTRL2);
	data \|= 3 << 2;
	mmio_write_32(PERI_SC_PERIPH_CTRL2, data);

	/* disable low power */
	data = mmio_read_32(PERI_SC_PERIPH_CTRL13);
	data \|= 1 << 4;
	mmio_write_32(PERI_SC_PERIPH_CTRL13, data);
	do {
	data = mmio_read_32(PERI_SC_PERIPH_RSTSTAT0);
	} while (!(data & PERI_RST0_MMC1));

	/* unreset mmc0 clock domain */
	mmio_write_32(PERI_SC_PERIPH_RSTDIS0, PERI_RST0_MMC1);
	do {
	data = mmio_read_32(PERI_SC_PERIPH_RSTSTAT0);
	} while (data & PERI_RST0_MMC1);
	}

	/* Initialize PLL of both eMMC and SD controllers. */
	static void hikey_mmc_pll_init(void)
	{
	init_mmc0_pll();
	reset_mmc0_clk();
	init_media_clk();

	dsb();

	init_mmc1_pll();
	reset_mmc1_clk();
	}

	static void hikey_rtc_init(void)
	{
	uint32_t data;

	data = mmio_read_32(AO_SC_PERIPH_CLKEN4);
	data \|= AO_SC_PERIPH_RSTDIS4_RESET_RTC0_N;
	mmio_write_32(AO_SC_PERIPH_CLKEN4, data);
	}

	/*
	* Function which will perform any remaining platform-specific setup that can
	* occur after the MMU and data cache have been enabled.
	*/
	void bl1_platform_setup(void)
	{
	dw_mmc_params_t params;

	assert((HIKEY_BL1_MMC_DESC_BASE >= SRAM_BASE) &&
	((SRAM_BASE + SRAM_SIZE) >=
	(HIKEY_BL1_MMC_DATA_BASE + HIKEY_BL1_MMC_DATA_SIZE)));
	hikey_sp804_init();
	hikey_gpio_init();
	hikey_pmussi_init();
	hikey_hi6553_init();

	hikey_rtc_init();

	hikey_mmc_pll_init();

	memset(&params, 0, sizeof(dw_mmc_params_t));
	params.reg_base = DWMMC0_BASE;
	params.desc_base = HIKEY_BL1_MMC_DESC_BASE;
	params.desc_size = 1 << 20;
	params.clk_rate = 24 * 1000 * 1000;
	params.bus_width = EMMC_BUS_WIDTH_8;
	params.flags = EMMC_FLAG_CMD23;
	dw_mmc_init(&params);

	hikey_io_setup();
	}

	/*
	* The following function checks if Firmware update is needed,
	* by checking if TOC in FIP image is valid or not.
	*/
	unsigned int bl1_plat_get_next_image_id(void)
	{
	int32_t boot_mode;
	unsigned int ret;

	boot_mode = mmio_read_32(ONCHIPROM_PARAM_BASE);
	switch (boot_mode) {
	case BOOT_NORMAL:
	ret = BL2_IMAGE_ID;
	break;
	case BOOT_USB_DOWNLOAD:
	case BOOT_UART_DOWNLOAD:
	ret = NS_BL1U_IMAGE_ID;
	break;
	default:
	WARN("Invalid boot mode is found:%d\n", boot_mode);
	panic();
	}
	return ret;
	}

	image_desc_t *bl1_plat_get_image_desc(unsigned int image_id)
	{
	unsigned int index = 0;

	while (bl1_tbbr_image_descs[index].image_id != INVALID_IMAGE_ID) {
	if (bl1_tbbr_image_descs[index].image_id == image_id)
	return &bl1_tbbr_image_descs[index];

	index++;
	}

	return NULL;
	}

	void bl1_plat_set_ep_info(unsigned int image_id,
	entry_point_info_t *ep_info)
	{
	unsigned int data = 0;

	if (image_id == BL2_IMAGE_ID)
	return;
	inv_dcache_range(NS_BL1U_BASE, NS_BL1U_SIZE);
	__asm__ volatile ("mrs %0, cpacr_el1" : "=r"(data));
	do {
	data \|= 3 << 20;
	__asm__ volatile ("msr cpacr_el1, %0" : : "r"(data));
	__asm__ volatile ("mrs %0, cpacr_el1" : "=r"(data));
	} while ((data & (3 << 20)) != (3 << 20));
	INFO("cpacr_el1:0x%x\n", data);

	ep_info->args.arg0 = 0xffff & read_mpidr();
	ep_info->spsr = SPSR_64(MODE_EL1, MODE_SP_ELX,
	DISABLE_ALL_EXCEPTIONS);
	}