| /* |
| * Copyright (c) 2013-2018, ARM Limited and Contributors. All rights reserved. |
| * |
| * SPDX-License-Identifier: BSD-3-Clause |
| */ |
| #ifndef __ASM_MACROS_S__ |
| #define __ASM_MACROS_S__ |
| |
| #include <arch.h> |
| #include <asm_macros_common.S> |
| #include <spinlock.h> |
| |
| /* |
| * TLBI instruction with type specifier that implements the workaround for |
| * errata 813419 of Cortex-A57. |
| */ |
| #if ERRATA_A57_813419 |
| #define TLB_INVALIDATE(_type) \ |
| tlbi _type; \ |
| dsb ish; \ |
| tlbi _type |
| #else |
| #define TLB_INVALIDATE(_type) \ |
| tlbi _type |
| #endif |
| |
| |
| .macro func_prologue |
| stp x29, x30, [sp, #-0x10]! |
| mov x29,sp |
| .endm |
| |
| .macro func_epilogue |
| ldp x29, x30, [sp], #0x10 |
| .endm |
| |
| |
| .macro dcache_line_size reg, tmp |
| mrs \tmp, ctr_el0 |
| ubfx \tmp, \tmp, #16, #4 |
| mov \reg, #4 |
| lsl \reg, \reg, \tmp |
| .endm |
| |
| |
| .macro icache_line_size reg, tmp |
| mrs \tmp, ctr_el0 |
| and \tmp, \tmp, #0xf |
| mov \reg, #4 |
| lsl \reg, \reg, \tmp |
| .endm |
| |
| |
| .macro smc_check label |
| mrs x0, esr_el3 |
| ubfx x0, x0, #ESR_EC_SHIFT, #ESR_EC_LENGTH |
| cmp x0, #EC_AARCH64_SMC |
| b.ne $label |
| .endm |
| |
| /* |
| * Declare the exception vector table, enforcing it is aligned on a |
| * 2KB boundary, as required by the ARMv8 architecture. |
| * Use zero bytes as the fill value to be stored in the padding bytes |
| * so that it inserts illegal AArch64 instructions. This increases |
| * security, robustness and potentially facilitates debugging. |
| */ |
| .macro vector_base label, section_name=.vectors |
| .section \section_name, "ax" |
| .align 11, 0 |
| \label: |
| .endm |
| |
| /* |
| * Create an entry in the exception vector table, enforcing it is |
| * aligned on a 128-byte boundary, as required by the ARMv8 architecture. |
| * Use zero bytes as the fill value to be stored in the padding bytes |
| * so that it inserts illegal AArch64 instructions. This increases |
| * security, robustness and potentially facilitates debugging. |
| */ |
| .macro vector_entry label, section_name=.vectors |
| .cfi_sections .debug_frame |
| .section \section_name, "ax" |
| .align 7, 0 |
| .type \label, %function |
| .func \label |
| .cfi_startproc |
| \label: |
| .endm |
| |
| /* |
| * This macro verifies that the given vector doesn't exceed the |
| * architectural limit of 32 instructions. This is meant to be placed |
| * immediately after the last instruction in the vector. It takes the |
| * vector entry as the parameter |
| */ |
| .macro check_vector_size since |
| .endfunc |
| .cfi_endproc |
| .if (. - \since) > (32 * 4) |
| .error "Vector exceeds 32 instructions" |
| .endif |
| .endm |
| |
| #if ENABLE_PLAT_COMPAT |
| /* |
| * This macro calculates the base address of an MP stack using the |
| * platform_get_core_pos() index, the name of the stack storage and |
| * the size of each stack |
| * In: X0 = MPIDR of CPU whose stack is wanted |
| * Out: X0 = physical address of stack base |
| * Clobber: X30, X1, X2 |
| */ |
| .macro get_mp_stack _name, _size |
| bl platform_get_core_pos |
| ldr x2, =(\_name + \_size) |
| mov x1, #\_size |
| madd x0, x0, x1, x2 |
| .endm |
| #endif |
| |
| /* |
| * This macro calculates the base address of the current CPU's MP stack |
| * using the plat_my_core_pos() index, the name of the stack storage |
| * and the size of each stack |
| * Out: X0 = physical address of stack base |
| * Clobber: X30, X1, X2 |
| */ |
| .macro get_my_mp_stack _name, _size |
| bl plat_my_core_pos |
| ldr x2, =(\_name + \_size) |
| mov x1, #\_size |
| madd x0, x0, x1, x2 |
| .endm |
| |
| /* |
| * This macro calculates the base address of a UP stack using the |
| * name of the stack storage and the size of the stack |
| * Out: X0 = physical address of stack base |
| */ |
| .macro get_up_stack _name, _size |
| ldr x0, =(\_name + \_size) |
| .endm |
| |
| /* |
| * Helper macro to generate the best mov/movk combinations according |
| * the value to be moved. The 16 bits from '_shift' are tested and |
| * if not zero, they are moved into '_reg' without affecting |
| * other bits. |
| */ |
| .macro _mov_imm16 _reg, _val, _shift |
| .if (\_val >> \_shift) & 0xffff |
| .if (\_val & (1 << \_shift - 1)) |
| movk \_reg, (\_val >> \_shift) & 0xffff, LSL \_shift |
| .else |
| mov \_reg, \_val & (0xffff << \_shift) |
| .endif |
| .endif |
| .endm |
| |
| /* |
| * Helper macro to load arbitrary values into 32 or 64-bit registers |
| * which generates the best mov/movk combinations. Many base addresses |
| * are 64KB aligned the macro will eliminate updating bits 15:0 in |
| * that case |
| */ |
| .macro mov_imm _reg, _val |
| .if (\_val) == 0 |
| mov \_reg, #0 |
| .else |
| _mov_imm16 \_reg, (\_val), 0 |
| _mov_imm16 \_reg, (\_val), 16 |
| _mov_imm16 \_reg, (\_val), 32 |
| _mov_imm16 \_reg, (\_val), 48 |
| .endif |
| .endm |
| |
| /* |
| * Macro to mark instances where we're jumping to a function and don't |
| * expect a return. To provide the function being jumped to with |
| * additional information, we use 'bl' instruction to jump rather than |
| * 'b'. |
| * |
| * Debuggers infer the location of a call from where LR points to, which |
| * is usually the instruction after 'bl'. If this macro expansion |
| * happens to be the last location in a function, that'll cause the LR |
| * to point a location beyond the function, thereby misleading debugger |
| * back trace. We therefore insert a 'nop' after the function call for |
| * debug builds, unless 'skip_nop' parameter is non-zero. |
| */ |
| .macro no_ret _func:req, skip_nop=0 |
| bl \_func |
| #if DEBUG |
| .ifeq \skip_nop |
| nop |
| .endif |
| #endif |
| .endm |
| |
| /* |
| * Reserve space for a spin lock in assembly file. |
| */ |
| .macro define_asm_spinlock _name:req |
| .align SPINLOCK_ASM_ALIGN |
| \_name: |
| .space SPINLOCK_ASM_SIZE |
| .endm |
| |
| #if RAS_EXTENSION |
| .macro esb |
| .inst 0xd503221f |
| .endm |
| #endif |
| |
| #endif /* __ASM_MACROS_S__ */ |