| /* |
| * Copyright (c) 2018, ARM Limited and Contributors. All rights reserved. |
| * |
| * SPDX-License-Identifier: BSD-3-Clause |
| */ |
| |
| #include <arch_helpers.h> |
| #include <assert.h> |
| #include <drivers/console.h> |
| #include <common/debug.h> |
| #include <errno.h> |
| #include <drivers/arm/gicv2.h> |
| #include <lib/mmio.h> |
| #include <plat/common/platform.h> |
| #include <platform_def.h> |
| #include <lib/psci/psci.h> |
| |
| #include "gxl_private.h" |
| |
| #define SCPI_POWER_ON 0 |
| #define SCPI_POWER_RETENTION 1 |
| #define SCPI_POWER_OFF 3 |
| |
| #define SCPI_SYSTEM_SHUTDOWN 0 |
| #define SCPI_SYSTEM_REBOOT 1 |
| |
| static uintptr_t gxbb_sec_entrypoint; |
| static volatile uint32_t gxbb_cpu0_go; |
| |
| static void gxbb_program_mailbox(u_register_t mpidr, uint64_t value) |
| { |
| unsigned int core = plat_gxbb_calc_core_pos(mpidr); |
| uintptr_t cpu_mailbox_addr = GXBB_PSCI_MAILBOX_BASE + (core << 4); |
| |
| mmio_write_64(cpu_mailbox_addr, value); |
| flush_dcache_range(cpu_mailbox_addr, sizeof(uint64_t)); |
| } |
| |
| static void __dead2 gxbb_system_reset(void) |
| { |
| INFO("BL31: PSCI_SYSTEM_RESET\n"); |
| |
| uint32_t status = mmio_read_32(GXBB_AO_RTI_STATUS_REG3); |
| |
| NOTICE("BL31: Reboot reason: 0x%x\n", status); |
| |
| status &= 0xFFFF0FF0; |
| |
| console_flush(); |
| |
| mmio_write_32(GXBB_AO_RTI_STATUS_REG3, status); |
| |
| int ret = scpi_sys_power_state(SCPI_SYSTEM_REBOOT); |
| |
| if (ret != 0) { |
| ERROR("BL31: PSCI_SYSTEM_RESET: SCP error: %u\n", ret); |
| panic(); |
| } |
| |
| wfi(); |
| |
| ERROR("BL31: PSCI_SYSTEM_RESET: Operation not handled\n"); |
| panic(); |
| } |
| |
| static void __dead2 gxbb_system_off(void) |
| { |
| INFO("BL31: PSCI_SYSTEM_OFF\n"); |
| |
| unsigned int ret = scpi_sys_power_state(SCPI_SYSTEM_SHUTDOWN); |
| |
| if (ret != 0) { |
| ERROR("BL31: PSCI_SYSTEM_OFF: SCP error %u\n", ret); |
| panic(); |
| } |
| |
| gxbb_program_mailbox(read_mpidr_el1(), 0); |
| |
| wfi(); |
| |
| ERROR("BL31: PSCI_SYSTEM_OFF: Operation not handled\n"); |
| panic(); |
| } |
| |
| static int32_t gxbb_pwr_domain_on(u_register_t mpidr) |
| { |
| unsigned int core = plat_gxbb_calc_core_pos(mpidr); |
| |
| /* CPU0 can't be turned OFF, emulate it with a WFE loop */ |
| if (core == GXBB_PRIMARY_CPU) { |
| VERBOSE("BL31: Releasing CPU0 from wait loop...\n"); |
| |
| gxbb_cpu0_go = 1; |
| flush_dcache_range((uintptr_t)&gxbb_cpu0_go, |
| sizeof(gxbb_cpu0_go)); |
| dsb(); |
| isb(); |
| |
| sev(); |
| |
| return PSCI_E_SUCCESS; |
| } |
| |
| gxbb_program_mailbox(mpidr, gxbb_sec_entrypoint); |
| scpi_set_css_power_state(mpidr, |
| SCPI_POWER_ON, SCPI_POWER_ON, SCPI_POWER_ON); |
| dmbsy(); |
| sev(); |
| |
| return PSCI_E_SUCCESS; |
| } |
| |
| static void gxbb_pwr_domain_on_finish(const psci_power_state_t *target_state) |
| { |
| unsigned int core = plat_gxbb_calc_core_pos(read_mpidr_el1()); |
| |
| assert(target_state->pwr_domain_state[MPIDR_AFFLVL0] == |
| PLAT_LOCAL_STATE_OFF); |
| |
| if (core == GXBB_PRIMARY_CPU) { |
| gxbb_cpu0_go = 0; |
| flush_dcache_range((uintptr_t)&gxbb_cpu0_go, |
| sizeof(gxbb_cpu0_go)); |
| dsb(); |
| isb(); |
| } |
| |
| gicv2_pcpu_distif_init(); |
| gicv2_cpuif_enable(); |
| } |
| |
| static void gxbb_pwr_domain_off(const psci_power_state_t *target_state) |
| { |
| u_register_t mpidr = read_mpidr_el1(); |
| unsigned int core = plat_gxbb_calc_core_pos(mpidr); |
| uintptr_t addr = GXBB_PSCI_MAILBOX_BASE + 8 + (core << 4); |
| |
| mmio_write_32(addr, 0xFFFFFFFF); |
| flush_dcache_range(addr, sizeof(uint32_t)); |
| |
| gicv2_cpuif_disable(); |
| |
| /* CPU0 can't be turned OFF, emulate it with a WFE loop */ |
| if (core == GXBB_PRIMARY_CPU) |
| return; |
| |
| scpi_set_css_power_state(mpidr, |
| SCPI_POWER_OFF, SCPI_POWER_ON, SCPI_POWER_ON); |
| } |
| |
| static void __dead2 gxbb_pwr_domain_pwr_down_wfi(const psci_power_state_t |
| *target_state) |
| { |
| unsigned int core = plat_gxbb_calc_core_pos(read_mpidr_el1()); |
| |
| /* CPU0 can't be turned OFF, emulate it with a WFE loop */ |
| if (core == GXBB_PRIMARY_CPU) { |
| VERBOSE("BL31: CPU0 entering wait loop...\n"); |
| |
| while (gxbb_cpu0_go == 0) |
| wfe(); |
| |
| VERBOSE("BL31: CPU0 resumed.\n"); |
| |
| write_rmr_el3(RMR_EL3_RR_BIT | RMR_EL3_AA64_BIT); |
| } |
| |
| dsbsy(); |
| |
| for (;;) |
| wfi(); |
| } |
| |
| /******************************************************************************* |
| * Platform handlers and setup function. |
| ******************************************************************************/ |
| static const plat_psci_ops_t gxbb_ops = { |
| .pwr_domain_on = gxbb_pwr_domain_on, |
| .pwr_domain_on_finish = gxbb_pwr_domain_on_finish, |
| .pwr_domain_off = gxbb_pwr_domain_off, |
| .pwr_domain_pwr_down_wfi = gxbb_pwr_domain_pwr_down_wfi, |
| .system_off = gxbb_system_off, |
| .system_reset = gxbb_system_reset, |
| }; |
| |
| int plat_setup_psci_ops(uintptr_t sec_entrypoint, |
| const plat_psci_ops_t **psci_ops) |
| { |
| gxbb_sec_entrypoint = sec_entrypoint; |
| *psci_ops = &gxbb_ops; |
| gxbb_cpu0_go = 0; |
| return 0; |
| } |