include/common/aarch64/asm_macros.S - filogic/atf - Gitiles

 /*
  * Copyright (c) 2013-2016, ARM Limited and Contributors. All rights reserved.
  *
  * Redistribution and use in source and binary forms, with or without
  * modification, are permitted provided that the following conditions are met:
  *
  * Redistributions of source code must retain the above copyright notice, this
  * list of conditions and the following disclaimer.
  *
  * Redistributions in binary form must reproduce the above copyright notice,
  * this list of conditions and the following disclaimer in the documentation
  * and/or other materials provided with the distribution.
  *
  * Neither the name of ARM nor the names of its contributors may be used
  * to endorse or promote products derived from this software without specific
  * prior written permission.
  *
  * THIS SOFTWARE IS PROVIDED BY THE COPYRIGHT HOLDERS AND CONTRIBUTORS "AS IS"
  * AND ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE
  * IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE
  * ARE DISCLAIMED. IN NO EVENT SHALL THE COPYRIGHT HOLDER OR CONTRIBUTORS BE
  * LIABLE FOR ANY DIRECT, INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY, OR
  * CONSEQUENTIAL DAMAGES (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF
  * SUBSTITUTE GOODS OR SERVICES; LOSS OF USE, DATA, OR PROFITS; OR BUSINESS
  * INTERRUPTION) HOWEVER CAUSED AND ON ANY THEORY OF LIABILITY, WHETHER IN
  * CONTRACT, STRICT LIABILITY, OR TORT (INCLUDING NEGLIGENCE OR OTHERWISE)
  * ARISING IN ANY WAY OUT OF THE USE OF THIS SOFTWARE, EVEN IF ADVISED OF THE
  * POSSIBILITY OF SUCH DAMAGE.
  */
 #ifndef __ASM_MACROS_S__
 #define __ASM_MACROS_S__

 #include <arch.h>
 #include <asm_macros_common.S>


 	.macro	func_prologue
 	stp	x29, x30, [sp, #-0x10]!
 	mov	x29,sp
 	.endm

 	.macro	func_epilogue
 	ldp	x29, x30, [sp], #0x10
 	.endm


 	.macro	dcache_line_size  reg, tmp
 	mrs	\tmp, ctr_el0
 	ubfx	\tmp, \tmp, #16, #4
 	mov	\reg, #4
 	lsl	\reg, \reg, \tmp
 	.endm


 	.macro	icache_line_size  reg, tmp
 	mrs	\tmp, ctr_el0
 	and	\tmp, \tmp, #0xf
 	mov	\reg, #4
 	lsl	\reg, \reg, \tmp
 	.endm


 	.macro	smc_check  label
 	mrs	x0, esr_el3
 	ubfx	x0, x0, #ESR_EC_SHIFT, #ESR_EC_LENGTH
 	cmp	x0, #EC_AARCH64_SMC
 	b.ne	$label
 	.endm

 	/*
 	 * Declare the exception vector table, enforcing it is aligned on a
 	 * 2KB boundary, as required by the ARMv8 architecture.
 	 * Use zero bytes as the fill value to be stored in the padding bytes
 	 * so that it inserts illegal AArch64 instructions. This increases
 	 * security, robustness and potentially facilitates debugging.
 	 */
 	.macro vector_base  label
 	.section .vectors, "ax"
 	.align 11, 0
 	\label:
 	.endm

 	/*
 	 * Create an entry in the exception vector table, enforcing it is
 	 * aligned on a 128-byte boundary, as required by the ARMv8 architecture.
 	 * Use zero bytes as the fill value to be stored in the padding bytes
 	 * so that it inserts illegal AArch64 instructions. This increases
 	 * security, robustness and potentially facilitates debugging.
 	 */
 	.macro vector_entry  label
 	.section .vectors, "ax"
 	.align 7, 0
 	\label:
 	.endm

 	/*
 	 * This macro verifies that the given vector doesn't exceed the
 	 * architectural limit of 32 instructions. This is meant to be placed
 	 * immediately after the last instruction in the vector. It takes the
 	 * vector entry as the parameter
 	 */
 	.macro check_vector_size since
 	  .if (. - \since) > (32 * 4)
 	    .error "Vector exceeds 32 instructions"
 	  .endif
 	.endm

 #if ENABLE_PLAT_COMPAT
 	/*
 	 * This macro calculates the base address of an MP stack using the
 	 * platform_get_core_pos() index, the name of the stack storage and
 	 * the size of each stack
 	 * In: X0 = MPIDR of CPU whose stack is wanted
 	 * Out: X0 = physical address of stack base
 	 * Clobber: X30, X1, X2
 	 */
 	.macro get_mp_stack _name, _size
 	bl  platform_get_core_pos
 	ldr x2, =(\_name + \_size)
 	mov x1, #\_size
 	madd x0, x0, x1, x2
 	.endm
 #endif

 	/*
 	 * This macro calculates the base address of the current CPU's MP stack
 	 * using the plat_my_core_pos() index, the name of the stack storage
 	 * and the size of each stack
 	 * Out: X0 = physical address of stack base
 	 * Clobber: X30, X1, X2
 	 */
 	.macro get_my_mp_stack _name, _size
 	bl  plat_my_core_pos
 	ldr x2, =(\_name + \_size)
 	mov x1, #\_size
 	madd x0, x0, x1, x2
 	.endm

 	/*
 	 * This macro calculates the base address of a UP stack using the
 	 * name of the stack storage and the size of the stack
 	 * Out: X0 = physical address of stack base
 	 */
 	.macro get_up_stack _name, _size
 	ldr x0, =(\_name + \_size)
 	.endm

 	/*
 	 * Helper macro to generate the best mov/movk combinations according
 	 * the value to be moved. The 16 bits from '_shift' are tested and
 	 * if not zero, they are moved into '_reg' without affecting
 	 * other bits.
 	 */
 	.macro _mov_imm16 _reg, _val, _shift
 		.if (\_val >> \_shift) & 0xffff
 			.if (\_val & (1 << \_shift - 1))
 				movk	\_reg, (\_val >> \_shift) & 0xffff, LSL \_shift
 			.else
 				mov	\_reg, \_val & (0xffff << \_shift)
 			.endif
 		.endif
 	.endm

 	/*
 	 * Helper macro to load arbitrary values into 32 or 64-bit registers
 	 * which generates the best mov/movk combinations. Many base addresses
 	 * are 64KB aligned the macro will eliminate updating bits 15:0 in
 	 * that case
 	 */
 	.macro mov_imm _reg, _val
 		.if (\_val) == 0
 			mov	\_reg, #0
 		.else
 			_mov_imm16	\_reg, (\_val), 0
 			_mov_imm16	\_reg, (\_val), 16
 			_mov_imm16	\_reg, (\_val), 32
 			_mov_imm16	\_reg, (\_val), 48
 		.endif
 	.endm

 	/*
 	 * Macro to mark instances where we're jumping to a function and don't
 	 * expect a return. To provide the function being jumped to with
 	 * additional information, we use 'bl' instruction to jump rather than
 	 * 'b'.
          *
 	 * Debuggers infer the location of a call from where LR points to, which
 	 * is usually the instruction after 'bl'. If this macro expansion
 	 * happens to be the last location in a function, that'll cause the LR
 	 * to point a location beyond the function, thereby misleading debugger
 	 * back trace. We therefore insert a 'nop' after the function call for
 	 * debug builds, unless 'skip_nop' parameter is non-zero.
 	 */
 	.macro no_ret _func:req, skip_nop=0
 	bl	\_func
 #if DEBUG
 	.ifeq \skip_nop
 	nop
 	.endif
 #endif
 	.endm

 #endif /* __ASM_MACROS_S__ */
	/*
	* Copyright (c) 2013-2016, ARM Limited and Contributors. All rights reserved.
	*
	* Redistribution and use in source and binary forms, with or without
	* modification, are permitted provided that the following conditions are met:
	*
	* Redistributions of source code must retain the above copyright notice, this
	* list of conditions and the following disclaimer.
	*
	* Redistributions in binary form must reproduce the above copyright notice,
	* this list of conditions and the following disclaimer in the documentation
	* and/or other materials provided with the distribution.
	*
	* Neither the name of ARM nor the names of its contributors may be used
	* to endorse or promote products derived from this software without specific
	* prior written permission.
	*
	* THIS SOFTWARE IS PROVIDED BY THE COPYRIGHT HOLDERS AND CONTRIBUTORS "AS IS"
	* AND ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE
	* IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE
	* ARE DISCLAIMED. IN NO EVENT SHALL THE COPYRIGHT HOLDER OR CONTRIBUTORS BE
	* LIABLE FOR ANY DIRECT, INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY, OR
	* CONSEQUENTIAL DAMAGES (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF
	* SUBSTITUTE GOODS OR SERVICES; LOSS OF USE, DATA, OR PROFITS; OR BUSINESS
	* INTERRUPTION) HOWEVER CAUSED AND ON ANY THEORY OF LIABILITY, WHETHER IN
	* CONTRACT, STRICT LIABILITY, OR TORT (INCLUDING NEGLIGENCE OR OTHERWISE)
	* ARISING IN ANY WAY OUT OF THE USE OF THIS SOFTWARE, EVEN IF ADVISED OF THE
	* POSSIBILITY OF SUCH DAMAGE.
	*/
	#ifndef __ASM_MACROS_S__
	#define __ASM_MACROS_S__

	#include <arch.h>
	#include <asm_macros_common.S>


	.macro func_prologue
	stp x29, x30, [sp, #-0x10]!
	mov x29,sp
	.endm

	.macro func_epilogue
	ldp x29, x30, [sp], #0x10
	.endm


	.macro dcache_line_size reg, tmp
	mrs \tmp, ctr_el0
	ubfx \tmp, \tmp, #16, #4
	mov \reg, #4
	lsl \reg, \reg, \tmp
	.endm


	.macro icache_line_size reg, tmp
	mrs \tmp, ctr_el0
	and \tmp, \tmp, #0xf
	mov \reg, #4
	lsl \reg, \reg, \tmp
	.endm


	.macro smc_check label
	mrs x0, esr_el3
	ubfx x0, x0, #ESR_EC_SHIFT, #ESR_EC_LENGTH
	cmp x0, #EC_AARCH64_SMC
	b.ne $label
	.endm

	/*
	* Declare the exception vector table, enforcing it is aligned on a
	* 2KB boundary, as required by the ARMv8 architecture.
	* Use zero bytes as the fill value to be stored in the padding bytes
	* so that it inserts illegal AArch64 instructions. This increases
	* security, robustness and potentially facilitates debugging.
	*/
	.macro vector_base label
	.section .vectors, "ax"
	.align 11, 0
	\label:
	.endm

	/*
	* Create an entry in the exception vector table, enforcing it is
	* aligned on a 128-byte boundary, as required by the ARMv8 architecture.
	* Use zero bytes as the fill value to be stored in the padding bytes
	* so that it inserts illegal AArch64 instructions. This increases
	* security, robustness and potentially facilitates debugging.
	*/
	.macro vector_entry label
	.section .vectors, "ax"
	.align 7, 0
	\label:
	.endm

	/*
	* This macro verifies that the given vector doesn't exceed the
	* architectural limit of 32 instructions. This is meant to be placed
	* immediately after the last instruction in the vector. It takes the
	* vector entry as the parameter
	*/
	.macro check_vector_size since
	.if (. - \since) > (32 * 4)
	.error "Vector exceeds 32 instructions"
	.endif
	.endm

	#if ENABLE_PLAT_COMPAT
	/*
	* This macro calculates the base address of an MP stack using the
	* platform_get_core_pos() index, the name of the stack storage and
	* the size of each stack
	* In: X0 = MPIDR of CPU whose stack is wanted
	* Out: X0 = physical address of stack base
	* Clobber: X30, X1, X2
	*/
	.macro get_mp_stack _name, _size
	bl platform_get_core_pos
	ldr x2, =(\_name + \_size)
	mov x1, #\_size
	madd x0, x0, x1, x2
	.endm
	#endif

	/*
	* This macro calculates the base address of the current CPU's MP stack
	* using the plat_my_core_pos() index, the name of the stack storage
	* and the size of each stack
	* Out: X0 = physical address of stack base
	* Clobber: X30, X1, X2
	*/
	.macro get_my_mp_stack _name, _size
	bl plat_my_core_pos
	ldr x2, =(\_name + \_size)
	mov x1, #\_size
	madd x0, x0, x1, x2
	.endm

	/*
	* This macro calculates the base address of a UP stack using the
	* name of the stack storage and the size of the stack
	* Out: X0 = physical address of stack base
	*/
	.macro get_up_stack _name, _size
	ldr x0, =(\_name + \_size)
	.endm

	/*
	* Helper macro to generate the best mov/movk combinations according
	* the value to be moved. The 16 bits from '_shift' are tested and
	* if not zero, they are moved into '_reg' without affecting
	* other bits.
	*/
	.macro _mov_imm16 _reg, _val, _shift
	.if (\_val >> \_shift) & 0xffff
	.if (\_val & (1 << \_shift - 1))
	movk \_reg, (\_val >> \_shift) & 0xffff, LSL \_shift
	.else
	mov \_reg, \_val & (0xffff << \_shift)
	.endif
	.endif
	.endm

	/*
	* Helper macro to load arbitrary values into 32 or 64-bit registers
	* which generates the best mov/movk combinations. Many base addresses
	* are 64KB aligned the macro will eliminate updating bits 15:0 in
	* that case
	*/
	.macro mov_imm _reg, _val
	.if (\_val) == 0
	mov \_reg, #0
	.else
	_mov_imm16 \_reg, (\_val), 0
	_mov_imm16 \_reg, (\_val), 16
	_mov_imm16 \_reg, (\_val), 32
	_mov_imm16 \_reg, (\_val), 48
	.endif
	.endm

	/*
	* Macro to mark instances where we're jumping to a function and don't
	* expect a return. To provide the function being jumped to with
	* additional information, we use 'bl' instruction to jump rather than
	* 'b'.
	*
	* Debuggers infer the location of a call from where LR points to, which
	* is usually the instruction after 'bl'. If this macro expansion
	* happens to be the last location in a function, that'll cause the LR
	* to point a location beyond the function, thereby misleading debugger
	* back trace. We therefore insert a 'nop' after the function call for
	* debug builds, unless 'skip_nop' parameter is non-zero.
	*/
	.macro no_ret _func:req, skip_nop=0
	bl \_func
	#if DEBUG
	.ifeq \skip_nop
	nop
	.endif
	#endif
	.endm

	#endif /* __ASM_MACROS_S__ */