blob: c7c748729c67552072029f49881bb0558266b66e [file] [log] [blame]
/*
* Copyright (c) 2013-2018, ARM Limited and Contributors. All rights reserved.
*
* SPDX-License-Identifier: BSD-3-Clause
*/
#ifndef __BL_COMMON_H__
#define __BL_COMMON_H__
#include <ep_info.h>
#include <param_header.h>
#include <utils_def.h>
#define UP 1
#define DOWN 0
/*******************************************************************************
* Constants to identify the location of a memory region in a given memory
* layout.
******************************************************************************/
#define TOP 0x1
#define BOTTOM !TOP
/*
* The following are used for image state attributes.
* Image can only be in one of the following state.
*/
#define IMAGE_STATE_RESET 0
#define IMAGE_STATE_COPIED 1
#define IMAGE_STATE_COPYING 2
#define IMAGE_STATE_AUTHENTICATED 3
#define IMAGE_STATE_EXECUTED 4
#define IMAGE_STATE_INTERRUPTED 5
#define IMAGE_ATTRIB_SKIP_LOADING U(0x02)
#define IMAGE_ATTRIB_PLAT_SETUP U(0x04)
#define INVALID_IMAGE_ID U(0xFFFFFFFF)
/*******************************************************************************
* Constants to indicate type of exception to the common exception handler.
******************************************************************************/
#define SYNC_EXCEPTION_SP_EL0 0x0
#define IRQ_SP_EL0 0x1
#define FIQ_SP_EL0 0x2
#define SERROR_SP_EL0 0x3
#define SYNC_EXCEPTION_SP_ELX 0x4
#define IRQ_SP_ELX 0x5
#define FIQ_SP_ELX 0x6
#define SERROR_SP_ELX 0x7
#define SYNC_EXCEPTION_AARCH64 0x8
#define IRQ_AARCH64 0x9
#define FIQ_AARCH64 0xa
#define SERROR_AARCH64 0xb
#define SYNC_EXCEPTION_AARCH32 0xc
#define IRQ_AARCH32 0xd
#define FIQ_AARCH32 0xe
#define SERROR_AARCH32 0xf
#ifndef __ASSEMBLY__
#include <cassert.h>
#include <stddef.h>
#include <stdint.h>
#include <types.h>
#include <utils_def.h> /* To retain compatibility */
/*
* Declarations of linker defined symbols to help determine memory layout of
* BL images
*/
#if SEPARATE_CODE_AND_RODATA
IMPORT_SYM(unsigned long, __TEXT_START__, BL_CODE_BASE);
IMPORT_SYM(unsigned long, __TEXT_END__, BL_CODE_END);
IMPORT_SYM(unsigned long, __RODATA_START__, BL_RO_DATA_BASE);
IMPORT_SYM(unsigned long, __RODATA_END__, BL_RO_DATA_END);
#else
IMPORT_SYM(unsigned long, __RO_START__, BL_CODE_BASE);
IMPORT_SYM(unsigned long, __RO_END__, BL_CODE_END);
#endif
#if defined(IMAGE_BL2)
IMPORT_SYM(unsigned long, __BL2_END__, BL2_END);
#elif defined(IMAGE_BL2U)
IMPORT_SYM(unsigned long, __BL2U_END__, BL2U_END);
#elif defined(IMAGE_BL31)
IMPORT_SYM(unsigned long, __BL31_END__, BL31_END);
#elif defined(IMAGE_BL32)
IMPORT_SYM(unsigned long, __BL32_END__, BL32_END);
#endif /* IMAGE_BLX */
/*
* The next 2 constants identify the extents of the coherent memory region.
* These addresses are used by the MMU setup code and therefore they must be
* page-aligned. It is the responsibility of the linker script to ensure that
* __COHERENT_RAM_START__ and __COHERENT_RAM_END__ linker symbols refer to
* page-aligned addresses.
*/
#if USE_COHERENT_MEM
IMPORT_SYM(unsigned long, __COHERENT_RAM_START__, BL_COHERENT_RAM_BASE);
IMPORT_SYM(unsigned long, __COHERENT_RAM_END__, BL_COHERENT_RAM_END);
#endif
/*******************************************************************************
* Structure used for telling the next BL how much of a particular type of
* memory is available for its use and how much is already used.
******************************************************************************/
typedef struct meminfo {
uintptr_t total_base;
size_t total_size;
#if !LOAD_IMAGE_V2
uintptr_t free_base;
size_t free_size;
#endif
} meminfo_t;
/*****************************************************************************
* Image info binary provides information from the image loader that
* can be used by the firmware to manage available trusted RAM.
* More advanced firmware image formats can provide additional
* information that enables optimization or greater flexibility in the
* common firmware code
*****************************************************************************/
typedef struct image_info {
param_header_t h;
uintptr_t image_base; /* physical address of base of image */
uint32_t image_size; /* bytes read from image file */
#if LOAD_IMAGE_V2
uint32_t image_max_size;
#endif
} image_info_t;
/*****************************************************************************
* The image descriptor struct definition.
*****************************************************************************/
typedef struct image_desc {
/* Contains unique image id for the image. */
unsigned int image_id;
/*
* This member contains Image state information.
* Refer IMAGE_STATE_XXX defined above.
*/
unsigned int state;
uint32_t copied_size; /* image size copied in blocks */
image_info_t image_info;
entry_point_info_t ep_info;
} image_desc_t;
#if LOAD_IMAGE_V2
/* BL image node in the BL image loading sequence */
typedef struct bl_load_info_node {
unsigned int image_id;
image_info_t *image_info;
struct bl_load_info_node *next_load_info;
} bl_load_info_node_t;
/* BL image head node in the BL image loading sequence */
typedef struct bl_load_info {
param_header_t h;
bl_load_info_node_t *head;
} bl_load_info_t;
/* BL image node in the BL image execution sequence */
typedef struct bl_params_node {
unsigned int image_id;
image_info_t *image_info;
entry_point_info_t *ep_info;
struct bl_params_node *next_params_info;
} bl_params_node_t;
/*
* BL image head node in the BL image execution sequence
* It is also used to pass information to next BL image.
*/
typedef struct bl_params {
param_header_t h;
bl_params_node_t *head;
} bl_params_t;
#else /* LOAD_IMAGE_V2 */
/*******************************************************************************
* This structure represents the superset of information that can be passed to
* BL31 e.g. while passing control to it from BL2. The BL32 parameters will be
* populated only if BL2 detects its presence. A pointer to a structure of this
* type should be passed in X0 to BL31's cold boot entrypoint.
*
* Use of this structure and the X0 parameter is not mandatory: the BL31
* platform code can use other mechanisms to provide the necessary information
* about BL32 and BL33 to the common and SPD code.
*
* BL31 image information is mandatory if this structure is used. If either of
* the optional BL32 and BL33 image information is not provided, this is
* indicated by the respective image_info pointers being zero.
******************************************************************************/
typedef struct bl31_params {
param_header_t h;
image_info_t *bl31_image_info;
entry_point_info_t *bl32_ep_info;
image_info_t *bl32_image_info;
entry_point_info_t *bl33_ep_info;
image_info_t *bl33_image_info;
} bl31_params_t;
#endif /* LOAD_IMAGE_V2 */
/*******************************************************************************
* Function & variable prototypes
******************************************************************************/
size_t image_size(unsigned int image_id);
int is_mem_free(uintptr_t free_base, size_t free_size,
uintptr_t addr, size_t size);
#if LOAD_IMAGE_V2
int load_auth_image(unsigned int image_id, image_info_t *image_data);
#else
int load_image(meminfo_t *mem_layout,
unsigned int image_id,
uintptr_t image_base,
image_info_t *image_data,
entry_point_info_t *entry_point_info);
int load_auth_image(meminfo_t *mem_layout,
unsigned int image_id,
uintptr_t image_base,
image_info_t *image_data,
entry_point_info_t *entry_point_info);
void reserve_mem(uintptr_t *free_base, size_t *free_size,
uintptr_t addr, size_t size);
#endif /* LOAD_IMAGE_V2 */
#if TRUSTED_BOARD_BOOT && defined(DYN_DISABLE_AUTH)
/*
* API to dynamically disable authentication. Only meant for development
* systems.
*/
void dyn_disable_auth(void);
#endif
extern const char build_message[];
extern const char version_string[];
void print_entry_point_info(const entry_point_info_t *ep_info);
uintptr_t page_align(uintptr_t value, unsigned dir);
#endif /*__ASSEMBLY__*/
#endif /* __BL_COMMON_H__ */