blob: 8a463eafe5d77d5488bea7f2d475d0115b02d166 [file] [log] [blame]
#
# Copyright (C) 2016 - 2020 Marvell International Ltd.
#
# SPDX-License-Identifier: BSD-3-Clause
# https://spdx.org/licenses
PLAT_FAMILY := a8k
PLAT_INCLUDE_BASE := include/plat/marvell/armada/$(PLAT_FAMILY)
PLAT_COMMON_BASE := plat/marvell/armada/a8k/common
MARVELL_DRV_BASE := drivers/marvell
MARVELL_COMMON_BASE := plat/marvell/armada/common
MARVELL_SVC_TEST := 0
$(eval $(call add_define,MARVELL_SVC_TEST))
ERRATA_A72_859971 := 1
# Enable MSS support for a8k family
MSS_SUPPORT := 1
# Disable EL3 cache for power management
BL31_CACHE_DISABLE := 0
$(eval $(call add_define,BL31_CACHE_DISABLE))
$(eval $(call add_define,PCI_EP_SUPPORT))
$(eval $(call assert_boolean,PCI_EP_SUPPORT))
AP_NUM := 1
$(eval $(call add_define,AP_NUM))
DOIMAGEPATH ?= tools/marvell/doimage
DOIMAGETOOL ?= ${DOIMAGEPATH}/doimage
include plat/marvell/marvell.mk
include tools/marvell/doimage/doimage.mk
ifeq (${MARVELL_SECURE_BOOT},1)
DOIMAGE_SEC_FLAGS := -c $(DOIMAGE_SEC)
DOIMAGE_LIBS_CHECK = \
if ! [ -d "/usr/include/mbedtls" ]; then \
echo "****************************************" >&2; \
echo "Missing mbedTLS installation! " >&2; \
echo "Please download it from \"tls.mbed.org\"" >&2; \
echo "Alternatively on Debian/Ubuntu system install" >&2; \
echo "\"libmbedtls-dev\" package" >&2; \
echo "Make sure to use version 2.1.0 or later" >&2; \
echo "****************************************" >&2; \
exit 1; \
else if ! [ -f "/usr/include/libconfig.h" ]; then \
echo "********************************************************" >&2; \
echo "Missing Libconfig installation!" >&2; \
echo "Please download it from \"www.hyperrealm.com/libconfig/\"" >&2; \
echo "Alternatively on Debian/Ubuntu system install packages" >&2; \
echo "\"libconfig8\" and \"libconfig8-dev\"" >&2; \
echo "********************************************************" >&2; \
exit 1; \
fi \
fi
else #MARVELL_SECURE_BOOT
DOIMAGE_LIBS_CHECK =
DOIMAGE_SEC_FLAGS =
endif #MARVELL_SECURE_BOOT
ROM_BIN_EXT ?= $(BUILD_PLAT)/ble.bin
DOIMAGE_FLAGS += -b $(ROM_BIN_EXT) $(NAND_DOIMAGE_FLAGS) $(DOIMAGE_SEC_FLAGS)
# Check whether to build system_power.c for the platform
ifneq ("$(wildcard $(BOARD_DIR)/board/system_power.c)","")
SYSTEM_POWER_SUPPORT = 1
else
SYSTEM_POWER_SUPPORT = 0
endif
# This define specifies DDR type for BLE
$(eval $(call add_define,CONFIG_DDR4))
MARVELL_GIC_SOURCES := drivers/arm/gic/common/gic_common.c \
drivers/arm/gic/v2/gicv2_main.c \
drivers/arm/gic/v2/gicv2_helpers.c \
plat/common/plat_gicv2.c
PLAT_INCLUDES := -I$(BOARD_DIR) \
-I$(BOARD_DIR)/board \
-I$(PLAT_COMMON_BASE)/include \
-I$(PLAT_INCLUDE_BASE)/common
PLAT_BL_COMMON_SOURCES := $(PLAT_COMMON_BASE)/aarch64/a8k_common.c \
drivers/ti/uart/aarch64/16550_console.S
BLE_PORTING_SOURCES := $(BOARD_DIR)/board/dram_port.c \
$(BOARD_DIR)/board/marvell_plat_config.c
MARVELL_MOCHI_DRV += $(MARVELL_DRV_BASE)/mochi/cp110_setup.c
BLE_SOURCES := drivers/mentor/i2c/mi2cv.c \
$(PLAT_COMMON_BASE)/plat_ble_setup.c \
$(MARVELL_MOCHI_DRV) \
$(PLAT_COMMON_BASE)/plat_pm.c \
$(MARVELL_DRV_BASE)/ap807_clocks_init.c \
$(MARVELL_DRV_BASE)/thermal.c \
$(PLAT_COMMON_BASE)/plat_thermal.c \
$(BLE_PORTING_SOURCES) \
$(MARVELL_DRV_BASE)/ccu.c \
$(MARVELL_DRV_BASE)/io_win.c
BL1_SOURCES += $(PLAT_COMMON_BASE)/aarch64/plat_helpers.S \
lib/cpus/aarch64/cortex_a72.S
MARVELL_DRV := $(MARVELL_DRV_BASE)/io_win.c \
$(MARVELL_DRV_BASE)/iob.c \
$(MARVELL_DRV_BASE)/mci.c \
$(MARVELL_DRV_BASE)/amb_adec.c \
$(MARVELL_DRV_BASE)/ccu.c \
$(MARVELL_DRV_BASE)/cache_llc.c \
$(MARVELL_DRV_BASE)/comphy/phy-comphy-cp110.c \
$(MARVELL_DRV_BASE)/mc_trustzone/mc_trustzone.c \
$(MARVELL_DRV_BASE)/mg_conf_cm3/mg_conf_cm3.c \
drivers/rambus/trng_ip_76.c
BL31_PORTING_SOURCES := $(BOARD_DIR)/board/marvell_plat_config.c
ifeq ($(SYSTEM_POWER_SUPPORT),1)
BL31_PORTING_SOURCES += $(BOARD_DIR)/board/system_power.c
endif
BL31_SOURCES += lib/cpus/aarch64/cortex_a72.S \
$(PLAT_COMMON_BASE)/aarch64/plat_helpers.S \
$(PLAT_COMMON_BASE)/aarch64/plat_arch_config.c \
$(PLAT_COMMON_BASE)/plat_pm.c \
$(PLAT_COMMON_BASE)/plat_bl31_setup.c \
$(MARVELL_COMMON_BASE)/marvell_gicv2.c \
$(MARVELL_COMMON_BASE)/mrvl_sip_svc.c \
$(MARVELL_COMMON_BASE)/marvell_ddr_info.c \
$(BL31_PORTING_SOURCES) \
$(MARVELL_DRV) \
$(MARVELL_MOCHI_DRV) \
$(MARVELL_GIC_SOURCES)
# Add trace functionality for PM
BL31_SOURCES += $(PLAT_COMMON_BASE)/plat_pm_trace.c
# Force builds with BL2 image on a80x0 platforms
ifndef SCP_BL2
$(error "Error: SCP_BL2 image is mandatory for a8k family")
endif
# MSS (SCP) build
include $(PLAT_COMMON_BASE)/mss/mss_a8k.mk
# BLE (ROM context execution code, AKA binary extension)
BLE_PATH ?= $(PLAT_COMMON_BASE)/ble
include ${BLE_PATH}/ble.mk
$(eval $(call MAKE_BL,e))
clean realclean distclean: mrvl_clean
.PHONY: mrvl_clean
mrvl_clean:
@echo " Doimage CLEAN"
${Q}${MAKE} PLAT=${PLAT} --no-print-directory -C ${DOIMAGEPATH} clean
${DOIMAGETOOL}: FORCE
@$(DOIMAGE_LIBS_CHECK)
${Q}${MAKE} --no-print-directory -C ${DOIMAGEPATH}
${BUILD_PLAT}/${FLASH_IMAGE}: ${ROM_BIN_EXT} ${BUILD_PLAT}/${BOOT_IMAGE} ${DOIMAGETOOL}
@${ECHO_BLANK_LINE}
@echo "Building flash image"
${Q}${DOIMAGETOOL} ${DOIMAGE_FLAGS} ${BUILD_PLAT}/${BOOT_IMAGE} ${BUILD_PLAT}/${FLASH_IMAGE}
@${ECHO_BLANK_LINE}
@echo "Built $@ successfully"
@${ECHO_BLANK_LINE}