blob: 60dcf3c12f090037492a63ebeb76464cba7dc15f [file] [log] [blame]
/*
* Copyright (c) 2017-2022, STMicroelectronics - All Rights Reserved
*
* SPDX-License-Identifier: BSD-3-Clause
*/
#ifndef BSEC_H
#define BSEC_H
#include <stdbool.h>
#include <stdint.h>
#include <lib/utils_def.h>
/*
* IP configuration
*/
#define BSEC_OTP_MASK GENMASK(4, 0)
#define BSEC_OTP_BANK_SHIFT 5
#define BSEC_TIMEOUT_VALUE 0xFFFF
/*
* Return status
*/
#define BSEC_OK 0U
#define BSEC_ERROR 0xFFFFFFFFU
#define BSEC_DISTURBED 0xFFFFFFFEU
#define BSEC_INVALID_PARAM 0xFFFFFFFCU
#define BSEC_PROG_FAIL 0xFFFFFFFBU
#define BSEC_LOCK_FAIL 0xFFFFFFFAU
#define BSEC_TIMEOUT 0xFFFFFFF9U
#define BSEC_RETRY 0xFFFFFFF8U
#define BSEC_NOT_SUPPORTED 0xFFFFFFF7U
#define BSEC_WRITE_LOCKED 0xFFFFFFF6U
#define BSEC_ERROR_INVALID_FVR 0xFFFFFFF5U
/*
* OTP MODE
*/
#define BSEC_MODE_OPEN1 0x00U
#define BSEC_MODE_SECURED 0x01U
#define BSEC_MODE_OPEN2 0x02U
#define BSEC_MODE_INVALID 0x04U
/*
* OTP Lock services definition.
* Value must corresponding to the bit number in the register.
* Special case: (bit number << 1) for BSEC3.
*/
#define BSEC_LOCK_UPPER_OTP 0x00
#define BSEC_LOCK_GWLOCK 0x01
#define BSEC_LOCK_DEBUG 0x02
#define BSEC_LOCK_PROGRAM 0x03
#define BSEC_LOCK_KVLOCK 0x04
/*
* Values for struct bsec_config::freq
*/
#define FREQ_10_20_MHZ 0x0
#define FREQ_20_30_MHZ 0x1
#define FREQ_30_45_MHZ 0x2
#define FREQ_45_67_MHZ 0x3
/*
* Device info structure, providing device-specific functions and a means of
* adding driver-specific state.
*/
struct bsec_config {
uint8_t den_lock; /*
* Debug enable sticky lock
* 1 debug enable is locked until next reset
*/
/* BSEC2 only */
uint8_t tread; /* SAFMEM Reading current level default 0 */
uint8_t pulse_width; /* SAFMEM Programming pulse width default 1 */
uint8_t freq; /*
* SAFMEM CLOCK see freq value define
* default FREQ_45_67_MHZ
*/
uint8_t power; /* Power up SAFMEM. 1 power up, 0 power off */
uint8_t prog_lock; /*
* Programming Sticky lock
* 1 programming is locked until next reset
*/
uint8_t upper_otp_lock; /*
* Shadowing of upper OTP sticky lock
* 1 shadowing of upper OTP is locked
* until next reset
*/
};
uint32_t bsec_probe(void);
uint32_t bsec_get_base(void);
uint32_t bsec_set_config(struct bsec_config *cfg);
uint32_t bsec_get_config(struct bsec_config *cfg);
uint32_t bsec_shadow_register(uint32_t otp);
uint32_t bsec_read_otp(uint32_t *val, uint32_t otp);
uint32_t bsec_write_otp(uint32_t val, uint32_t otp);
uint32_t bsec_program_otp(uint32_t val, uint32_t otp);
uint32_t bsec_permanent_lock_otp(uint32_t otp);
void bsec_write_debug_conf(uint32_t val);
uint32_t bsec_read_debug_conf(void);
void bsec_write_scratch(uint32_t val);
uint32_t bsec_read_scratch(void);
uint32_t bsec_get_status(void);
uint32_t bsec_get_hw_conf(void);
uint32_t bsec_get_version(void);
uint32_t bsec_get_id(void);
uint32_t bsec_get_magic_id(void);
uint32_t bsec_set_sr_lock(uint32_t otp);
uint32_t bsec_read_sr_lock(uint32_t otp, bool *value);
uint32_t bsec_set_sw_lock(uint32_t otp);
uint32_t bsec_read_sw_lock(uint32_t otp, bool *value);
uint32_t bsec_set_sp_lock(uint32_t otp);
uint32_t bsec_read_sp_lock(uint32_t otp, bool *value);
uint32_t bsec_read_permanent_lock(uint32_t otp, bool *value);
uint32_t bsec_otp_lock(uint32_t service);
uint32_t bsec_shadow_read_otp(uint32_t *otp_value, uint32_t word);
uint32_t bsec_check_nsec_access_rights(uint32_t otp);
#endif /* BSEC_H */