blob: 55600ee69f454b4e5a8d2db9b36f1cfda9f5d0ee [file] [log] [blame]
/*
* Copyright (c) 2019-2020, ARM Limited and Contributors. All rights reserved.
* Copyright (c) 2019-2020, Intel Corporation. All rights reserved.
*
* SPDX-License-Identifier: BSD-3-Clause
*/
#ifndef PLATFORM_DEF_H
#define PLATFORM_DEF_H
#include <arch.h>
#include <common/interrupt_props.h>
#include <common/tbbr/tbbr_img_def.h>
#include <plat/common/common_def.h>
#define PLAT_SOCFPGA_STRATIX10 1
#define PLAT_SOCFPGA_AGILEX 2
/* sysmgr.boot_scratch_cold4 & 5 used for CPU release address for SPL */
#define PLAT_CPU_RELEASE_ADDR 0xffd12210
/*
* sysmgr.boot_scratch_cold6 & 7 (64bit) are used to indicate L2 reset
* is done and HPS should trigger warm reset via RMR_EL3.
*/
#define L2_RESET_DONE_REG 0xFFD12218
/* Magic word to indicate L2 reset is completed */
#define L2_RESET_DONE_STATUS 0x1228E5E7
/* Define next boot image name and offset */
#define PLAT_NS_IMAGE_OFFSET 0x10000000
#define PLAT_HANDOFF_OFFSET 0xFFE3F000
/*******************************************************************************
* Platform binary types for linking
******************************************************************************/
#define PLATFORM_LINKER_FORMAT "elf64-littleaarch64"
#define PLATFORM_LINKER_ARCH aarch64
/* SoCFPGA supports up to 124GB RAM */
#define PLAT_PHY_ADDR_SPACE_SIZE (1ULL << 39)
#define PLAT_VIRT_ADDR_SPACE_SIZE (1ULL << 39)
/*******************************************************************************
* Generic platform constants
******************************************************************************/
#define PLAT_PRIMARY_CPU 0
#define PLAT_SECONDARY_ENTRY_BASE 0x01f78bf0
/* Size of cacheable stacks */
#define PLATFORM_STACK_SIZE 0x2000
/* PSCI related constant */
#define PLAT_NUM_POWER_DOMAINS 5
#define PLAT_MAX_PWR_LVL 1
#define PLAT_MAX_RET_STATE 1
#define PLAT_MAX_OFF_STATE 2
#define PLATFORM_SYSTEM_COUNT U(1)
#define PLATFORM_CLUSTER_COUNT U(1)
#define PLATFORM_CLUSTER0_CORE_COUNT U(4)
#define PLATFORM_CLUSTER1_CORE_COUNT U(0)
#define PLATFORM_CORE_COUNT (PLATFORM_CLUSTER1_CORE_COUNT + \
PLATFORM_CLUSTER0_CORE_COUNT)
#define PLATFORM_MAX_CPUS_PER_CLUSTER U(4)
/* Interrupt related constant */
#define INTEL_SOCFPGA_IRQ_SEC_PHY_TIMER 29
#define INTEL_SOCFPGA_IRQ_SEC_SGI_0 8
#define INTEL_SOCFPGA_IRQ_SEC_SGI_1 9
#define INTEL_SOCFPGA_IRQ_SEC_SGI_2 10
#define INTEL_SOCFPGA_IRQ_SEC_SGI_3 11
#define INTEL_SOCFPGA_IRQ_SEC_SGI_4 12
#define INTEL_SOCFPGA_IRQ_SEC_SGI_5 13
#define INTEL_SOCFPGA_IRQ_SEC_SGI_6 14
#define INTEL_SOCFPGA_IRQ_SEC_SGI_7 15
#define TSP_IRQ_SEC_PHY_TIMER INTEL_SOCFPGA_IRQ_SEC_PHY_TIMER
#define TSP_SEC_MEM_BASE BL32_BASE
#define TSP_SEC_MEM_SIZE (BL32_LIMIT - BL32_BASE + 1)
/*******************************************************************************
* Platform memory map related constants
******************************************************************************/
#define DRAM_BASE (0x0)
#define DRAM_SIZE (0x80000000)
#define OCRAM_BASE (0xFFE00000)
#define OCRAM_SIZE (0x00040000)
#define MEM64_BASE (0x0100000000)
#define MEM64_SIZE (0x1F00000000)
#define DEVICE1_BASE (0x80000000)
#define DEVICE1_SIZE (0x60000000)
#define DEVICE2_BASE (0xF7000000)
#define DEVICE2_SIZE (0x08E00000)
#define DEVICE3_BASE (0xFFFC0000)
#define DEVICE3_SIZE (0x00008000)
#define DEVICE4_BASE (0x2000000000)
#define DEVICE4_SIZE (0x0100000000)
/*******************************************************************************
* BL31 specific defines.
******************************************************************************/
/*
* Put BL3-1 at the top of the Trusted SRAM (just below the shared memory, if
* present). BL31_BASE is calculated using the current BL3-1 debug size plus a
* little space for growth.
*/
#define FIRMWARE_WELCOME_STR "Booting Trusted Firmware\n"
#define BL1_RO_BASE (0xffe00000)
#define BL1_RO_LIMIT (0xffe0f000)
#define BL1_RW_BASE (0xffe10000)
#define BL1_RW_LIMIT (0xffe1ffff)
#define BL1_RW_SIZE (0x14000)
#define BL2_BASE (0xffe00000)
#define BL2_LIMIT (0xffe1b000)
#define BL31_BASE (0x1000)
#define BL31_LIMIT (0x81000)
#define BL_DATA_LIMIT PLAT_HANDOFF_OFFSET
#define PLAT_CPUID_RELEASE (BL_DATA_LIMIT - 16)
#define PLAT_SEC_ENTRY (BL_DATA_LIMIT - 8)
#define PLAT_SEC_WARM_ENTRY 0
/*******************************************************************************
* Platform specific page table and MMU setup constants
******************************************************************************/
#define MAX_XLAT_TABLES 8
#define MAX_MMAP_REGIONS 16
/*******************************************************************************
* Declarations and constants to access the mailboxes safely. Each mailbox is
* aligned on the biggest cache line size in the platform. This is known only
* to the platform as it might have a combination of integrated and external
* caches. Such alignment ensures that two maiboxes do not sit on the same cache
* line at any cache level. They could belong to different cpus/clusters &
* get written while being protected by different locks causing corruption of
* a valid mailbox address.
******************************************************************************/
#define CACHE_WRITEBACK_SHIFT 6
#define CACHE_WRITEBACK_GRANULE (1 << CACHE_WRITEBACK_SHIFT)
#define PLAT_GIC_BASE (0xFFFC0000)
#define PLAT_GICC_BASE (PLAT_GIC_BASE + 0x2000)
#define PLAT_GICD_BASE (PLAT_GIC_BASE + 0x1000)
#define PLAT_GICR_BASE 0
/*******************************************************************************
* UART related constants
******************************************************************************/
#define PLAT_UART0_BASE (0xFFC02000)
#define PLAT_UART1_BASE (0xFFC02100)
#define CRASH_CONSOLE_BASE PLAT_UART0_BASE
#define PLAT_BAUDRATE (115200)
#define PLAT_UART_CLOCK (100000000)
/*******************************************************************************
* PHY related constants
******************************************************************************/
#define EMAC0_PHY_MODE PHY_INTERFACE_MODE_RGMII
#define EMAC1_PHY_MODE PHY_INTERFACE_MODE_RGMII
#define EMAC2_PHY_MODE PHY_INTERFACE_MODE_RGMII
/*******************************************************************************
* System counter frequency related constants
******************************************************************************/
#define PLAT_SYS_COUNTER_FREQ_IN_TICKS (400000000)
#define PLAT_SYS_COUNTER_FREQ_IN_MHZ (400)
#define PLAT_INTEL_SOCFPGA_GICD_BASE PLAT_GICD_BASE
#define PLAT_INTEL_SOCFPGA_GICC_BASE PLAT_GICC_BASE
/*
* Define a list of Group 1 Secure and Group 0 interrupts as per GICv3
* terminology. On a GICv2 system or mode, the lists will be merged and treated
* as Group 0 interrupts.
*/
#define PLAT_INTEL_SOCFPGA_G1S_IRQ_PROPS(grp) \
INTR_PROP_DESC(INTEL_SOCFPGA_IRQ_SEC_PHY_TIMER, \
GIC_HIGHEST_SEC_PRIORITY, grp, GIC_INTR_CFG_LEVEL), \
INTR_PROP_DESC(INTEL_SOCFPGA_IRQ_SEC_SGI_0, \
GIC_HIGHEST_SEC_PRIORITY, grp, GIC_INTR_CFG_EDGE), \
INTR_PROP_DESC(INTEL_SOCFPGA_IRQ_SEC_SGI_1, \
GIC_HIGHEST_SEC_PRIORITY, grp, GIC_INTR_CFG_EDGE), \
INTR_PROP_DESC(INTEL_SOCFPGA_IRQ_SEC_SGI_2, \
GIC_HIGHEST_SEC_PRIORITY, grp, GIC_INTR_CFG_EDGE), \
INTR_PROP_DESC(INTEL_SOCFPGA_IRQ_SEC_SGI_3, \
GIC_HIGHEST_SEC_PRIORITY, grp, GIC_INTR_CFG_EDGE), \
INTR_PROP_DESC(INTEL_SOCFPGA_IRQ_SEC_SGI_4, \
GIC_HIGHEST_SEC_PRIORITY, grp, GIC_INTR_CFG_EDGE), \
INTR_PROP_DESC(INTEL_SOCFPGA_IRQ_SEC_SGI_5, \
GIC_HIGHEST_SEC_PRIORITY, grp, GIC_INTR_CFG_EDGE), \
INTR_PROP_DESC(INTEL_SOCFPGA_IRQ_SEC_SGI_6, \
GIC_HIGHEST_SEC_PRIORITY, grp, GIC_INTR_CFG_EDGE), \
INTR_PROP_DESC(INTEL_SOCFPGA_IRQ_SEC_SGI_7, \
GIC_HIGHEST_SEC_PRIORITY, grp, GIC_INTR_CFG_EDGE)
#define PLAT_INTEL_SOCFPGA_G0_IRQ_PROPS(grp)
#define MAX_IO_HANDLES 4
#define MAX_IO_DEVICES 4
#define MAX_IO_BLOCK_DEVICES 2
#ifndef __ASSEMBLER__
struct socfpga_bl31_params {
param_header_t h;
image_info_t *bl31_image_info;
entry_point_info_t *bl32_ep_info;
image_info_t *bl32_image_info;
entry_point_info_t *bl33_ep_info;
image_info_t *bl33_image_info;
};
#endif
#endif /* PLATFORM_DEF_H */