plat/arm/common/arm_bl1_setup.c - filogic/atf - Gitiles

 /*
  * Copyright (c) 2015-2024, Arm Limited and Contributors. All rights reserved.
  *
  * SPDX-License-Identifier: BSD-3-Clause
  */

 #include <assert.h>

 #include <platform_def.h>

 #include <arch.h>
 #include <bl1/bl1.h>
 #include <common/bl_common.h>
 #include <common/debug.h>
 #include <lib/fconf/fconf.h>
 #include <lib/fconf/fconf_dyn_cfg_getter.h>
 #if TRANSFER_LIST
 #include <lib/transfer_list.h>
 #endif
 #include <lib/utils.h>
 #include <lib/xlat_tables/xlat_tables_compat.h>
 #include <plat/arm/common/plat_arm.h>
 #include <plat/common/platform.h>

 /* Weak definitions may be overridden in specific ARM standard platform */
 #pragma weak bl1_early_platform_setup
 #pragma weak bl1_plat_arch_setup
 #pragma weak bl1_plat_sec_mem_layout
 #pragma weak arm_bl1_early_platform_setup
 #pragma weak bl1_plat_prepare_exit
 #pragma weak bl1_plat_get_next_image_id
 #pragma weak plat_arm_bl1_fwu_needed
 #pragma weak arm_bl1_plat_arch_setup
 #pragma weak arm_bl1_platform_setup

 #define MAP_BL1_TOTAL		MAP_REGION_FLAT(			\
 					bl1_tzram_layout.total_base,	\
 					bl1_tzram_layout.total_size,	\
 					MT_MEMORY | MT_RW | EL3_PAS)
 /*
  * If SEPARATE_CODE_AND_RODATA=1 we define a region for each section
  * otherwise one region is defined containing both
  */
 #if SEPARATE_CODE_AND_RODATA
 #define MAP_BL1_RO		MAP_REGION_FLAT(			\
 					BL_CODE_BASE,			\
 					BL1_CODE_END - BL_CODE_BASE,	\
 					MT_CODE | EL3_PAS),		\
 				MAP_REGION_FLAT(			\
 					BL1_RO_DATA_BASE,		\
 					BL1_RO_DATA_END			\
 						- BL_RO_DATA_BASE,	\
 					MT_RO_DATA | EL3_PAS)
 #else
 #define MAP_BL1_RO		MAP_REGION_FLAT(			\
 					BL_CODE_BASE,			\
 					BL1_CODE_END - BL_CODE_BASE,	\
 					MT_CODE | EL3_PAS)
 #endif

 /* Data structure which holds the extents of the trusted SRAM for BL1*/
 static meminfo_t bl1_tzram_layout;

 /* Boolean variable to hold condition whether firmware update needed or not */
 static bool is_fwu_needed;

 struct transfer_list_header *secure_tl;

 struct meminfo *bl1_plat_sec_mem_layout(void)
 {
 	return &bl1_tzram_layout;
 }

 /*******************************************************************************
  * BL1 specific platform actions shared between ARM standard platforms.
  ******************************************************************************/
 void arm_bl1_early_platform_setup(void)
 {

 #if !ARM_DISABLE_TRUSTED_WDOG
 	/* Enable watchdog */
 	plat_arm_secure_wdt_start();
 #endif

 	/* Initialize the console to provide early debug support */
 	arm_console_boot_init();

 	/* Allow BL1 to see the whole Trusted RAM */
 	bl1_tzram_layout.total_base = ARM_BL_RAM_BASE;
 	bl1_tzram_layout.total_size = ARM_BL_RAM_SIZE;

 #if TRANSFER_LIST
 	secure_tl = transfer_list_ensure((void *)PLAT_ARM_EL3_FW_HANDOFF_BASE,
 					 PLAT_ARM_FW_HANDOFF_SIZE);
 	assert(secure_tl != NULL);
 #endif
 }

 void bl1_early_platform_setup(void)
 {
 	arm_bl1_early_platform_setup();

 	/*
 	 * Initialize Interconnect for this cluster during cold boot.
 	 * No need for locks as no other CPU is active.
 	 */
 	plat_arm_interconnect_init();
 	/*
 	 * Enable Interconnect coherency for the primary CPU's cluster.
 	 */
 	plat_arm_interconnect_enter_coherency();
 }

 /******************************************************************************
  * Perform the very early platform specific architecture setup shared between
  * ARM standard platforms. This only does basic initialization. Later
  * architectural setup (bl1_arch_setup()) does not do anything platform
  * specific.
  *****************************************************************************/
 void arm_bl1_plat_arch_setup(void)
 {
 #if USE_COHERENT_MEM
 	/* Ensure ARM platforms don't use coherent memory in BL1. */
 	assert((BL_COHERENT_RAM_END - BL_COHERENT_RAM_BASE) == 0U);
 #endif

 	const mmap_region_t bl_regions[] = {
 		MAP_BL1_TOTAL,
 		MAP_BL1_RO,
 #if USE_ROMLIB
 		ARM_MAP_ROMLIB_CODE,
 		ARM_MAP_ROMLIB_DATA,
 #endif
 		{0}
 	};

 	setup_page_tables(bl_regions, plat_arm_get_mmap());
 #ifdef __aarch64__
 	enable_mmu_el3(0);
 #else
 	enable_mmu_svc_mon(0);
 #endif /* __aarch64__ */

 	arm_setup_romlib();
 }

 void bl1_plat_arch_setup(void)
 {
 	arm_bl1_plat_arch_setup();
 }

 /*
  * Perform the platform specific architecture setup shared between
  * ARM standard platforms.
  */
 void arm_bl1_platform_setup(void)
 {
 	const struct dyn_cfg_dtb_info_t *config_info __unused;
 	uint32_t fw_config_max_size __unused;
 	image_info_t config_image_info __unused;
 	struct transfer_list_entry *te __unused;

 	image_desc_t *desc;

 	int err __unused = 1;

 	/* Initialise the IO layer and register platform IO devices */
 	plat_arm_io_setup();

 	/* Check if we need FWU before further processing */
 	is_fwu_needed = plat_arm_bl1_fwu_needed();
 	if (is_fwu_needed) {
 		ERROR("Skip platform setup as FWU detected\n");
 		return;
 	}

 #if TRANSFER_LIST
 #if CRYPTO_SUPPORT
 	te = transfer_list_add(secure_tl, TL_TAG_MBEDTLS_HEAP_INFO,
 			       sizeof(struct crypto_heap_info), NULL);
 	assert(te != NULL);

 	struct crypto_heap_info *heap_info =
 		(struct crypto_heap_info *)transfer_list_entry_data(te);
 	arm_get_mbedtls_heap(&heap_info->addr, &heap_info->size);
 #endif /* CRYPTO_SUPPORT */

 	desc = bl1_plat_get_image_desc(BL2_IMAGE_ID);

 	/*
 	 * The event log might have been updated prior to this, make sure we have an
 	 * up to date tl before setting the handoff arguments.
 	 */
 	transfer_list_update_checksum(secure_tl);
 	transfer_list_set_handoff_args(secure_tl, &desc->ep_info);
 #else
 	/* Set global DTB info for fixed fw_config information */
 	fw_config_max_size = ARM_FW_CONFIG_LIMIT - ARM_FW_CONFIG_BASE;
 	set_config_info(ARM_FW_CONFIG_BASE, ~0UL, fw_config_max_size, FW_CONFIG_ID);

 	/* Fill the device tree information struct with the info from the config dtb */
 	err = fconf_load_config(FW_CONFIG_ID);
 	if (err < 0) {
 		ERROR("Loading of FW_CONFIG failed %d\n", err);
 		plat_error_handler(err);
 	}

 	/*
 	 * FW_CONFIG loaded successfully. If FW_CONFIG device tree parsing
 	 * is successful then load TB_FW_CONFIG device tree.
 	 */
 	config_info = FCONF_GET_PROPERTY(dyn_cfg, dtb, FW_CONFIG_ID);
 	if (config_info != NULL) {
 		err = fconf_populate_dtb_registry(config_info->config_addr);
 		if (err < 0) {
 			ERROR("Parsing of FW_CONFIG failed %d\n", err);
 			plat_error_handler(err);
 		}

 		/* load TB_FW_CONFIG */
 		err = fconf_load_config(TB_FW_CONFIG_ID);
 		if (err < 0) {
 			ERROR("Loading of TB_FW_CONFIG failed %d\n", err);
 			plat_error_handler(err);
 		}
 	} else {
 		ERROR("Invalid FW_CONFIG address\n");
 		plat_error_handler(err);
 	}

 	desc = bl1_plat_get_image_desc(BL2_IMAGE_ID);

 	/* The BL2 ep_info arg0 is modified to point to FW_CONFIG */
 	assert(desc != NULL);
 	desc->ep_info.args.arg0 = config_info->config_addr;

 #if CRYPTO_SUPPORT
 	/* Share the Mbed TLS heap info with other images */
 	arm_bl1_set_mbedtls_heap();
 #endif /* CRYPTO_SUPPORT */
 #endif /* TRANSFER_LIST */

 	/*
 	 * Allow access to the System counter timer module and program
 	 * counter frequency for non secure images during FWU
 	 */
 #ifdef ARM_SYS_TIMCTL_BASE
 	arm_configure_sys_timer();
 #endif
 #if (ARM_ARCH_MAJOR > 7) || defined(ARMV7_SUPPORTS_GENERIC_TIMER)
 	write_cntfrq_el0(plat_get_syscnt_freq2());
 #endif
 }

 void bl1_plat_prepare_exit(entry_point_info_t *ep_info)
 {
 #if !ARM_DISABLE_TRUSTED_WDOG
 	/* Disable watchdog before leaving BL1 */
 	plat_arm_secure_wdt_stop();
 #endif

 #ifdef EL3_PAYLOAD_BASE
 	/*
 	 * Program the EL3 payload's entry point address into the CPUs mailbox
 	 * in order to release secondary CPUs from their holding pen and make
 	 * them jump there.
 	 */
 	plat_arm_program_trusted_mailbox(ep_info->pc);
 	dsbsy();
 	sev();
 #endif
 }

 /*
  * On Arm platforms, the FWU process is triggered when the FIP image has
  * been tampered with.
  */
 bool plat_arm_bl1_fwu_needed(void)
 {
 	return !arm_io_is_toc_valid();
 }

 /*******************************************************************************
  * The following function checks if Firmware update is needed,
  * by checking if TOC in FIP image is valid or not.
  ******************************************************************************/
 unsigned int bl1_plat_get_next_image_id(void)
 {
 	return  is_fwu_needed ? NS_BL1U_IMAGE_ID : BL2_IMAGE_ID;
 }

 // Use the default implementation of this function when Firmware Handoff is
 // disabled to avoid duplicating its logic.
 #if TRANSFER_LIST
 int bl1_plat_handle_post_image_load(unsigned int image_id)
 {
 	image_desc_t *image_desc __unused;

 	assert(image_id == BL2_IMAGE_ID);
 	struct transfer_list_entry *te;

 	/* Convey this information to BL2 via its TL. */
 	te = transfer_list_add(secure_tl, TL_TAG_SRAM_LAYOUT64,
 			       sizeof(meminfo_t), NULL);
 	assert(te != NULL);

 	bl1_plat_calc_bl2_layout(&bl1_tzram_layout,
 				 (meminfo_t *)transfer_list_entry_data(te));

 	transfer_list_update_checksum(secure_tl);

 	/**
 	 * Before exiting make sure the contents of the TL are flushed in case there's no
 	 * support for hardware cache coherency.
 	 */
 	flush_dcache_range((uintptr_t)secure_tl, secure_tl->size);
 	return 0;
 }
 #endif /* TRANSFER_LIST*/
	/*
	* Copyright (c) 2015-2024, Arm Limited and Contributors. All rights reserved.
	*
	* SPDX-License-Identifier: BSD-3-Clause
	*/

	#include <assert.h>

	#include <platform_def.h>

	#include <arch.h>
	#include <bl1/bl1.h>
	#include <common/bl_common.h>
	#include <common/debug.h>
	#include <lib/fconf/fconf.h>
	#include <lib/fconf/fconf_dyn_cfg_getter.h>
	#if TRANSFER_LIST
	#include <lib/transfer_list.h>
	#endif
	#include <lib/utils.h>
	#include <lib/xlat_tables/xlat_tables_compat.h>
	#include <plat/arm/common/plat_arm.h>
	#include <plat/common/platform.h>

	/* Weak definitions may be overridden in specific ARM standard platform */
	#pragma weak bl1_early_platform_setup
	#pragma weak bl1_plat_arch_setup
	#pragma weak bl1_plat_sec_mem_layout
	#pragma weak arm_bl1_early_platform_setup
	#pragma weak bl1_plat_prepare_exit
	#pragma weak bl1_plat_get_next_image_id
	#pragma weak plat_arm_bl1_fwu_needed
	#pragma weak arm_bl1_plat_arch_setup
	#pragma weak arm_bl1_platform_setup

	#define MAP_BL1_TOTAL MAP_REGION_FLAT( \
	bl1_tzram_layout.total_base, \
	bl1_tzram_layout.total_size, \
	MT_MEMORY \| MT_RW \| EL3_PAS)
	/*
	* If SEPARATE_CODE_AND_RODATA=1 we define a region for each section
	* otherwise one region is defined containing both
	*/
	#if SEPARATE_CODE_AND_RODATA
	#define MAP_BL1_RO MAP_REGION_FLAT( \
	BL_CODE_BASE, \
	BL1_CODE_END - BL_CODE_BASE, \
	MT_CODE \| EL3_PAS), \
	MAP_REGION_FLAT( \
	BL1_RO_DATA_BASE, \
	BL1_RO_DATA_END \
	- BL_RO_DATA_BASE, \
	MT_RO_DATA \| EL3_PAS)
	#else
	#define MAP_BL1_RO MAP_REGION_FLAT( \
	BL_CODE_BASE, \
	BL1_CODE_END - BL_CODE_BASE, \
	MT_CODE \| EL3_PAS)
	#endif

	/* Data structure which holds the extents of the trusted SRAM for BL1*/
	static meminfo_t bl1_tzram_layout;

	/* Boolean variable to hold condition whether firmware update needed or not */
	static bool is_fwu_needed;

	struct transfer_list_header *secure_tl;

	struct meminfo *bl1_plat_sec_mem_layout(void)
	{
	return &bl1_tzram_layout;
	}

	/*******************************************************************************
	* BL1 specific platform actions shared between ARM standard platforms.
	******************************************************************************/
	void arm_bl1_early_platform_setup(void)
	{

	#if !ARM_DISABLE_TRUSTED_WDOG
	/* Enable watchdog */
	plat_arm_secure_wdt_start();
	#endif

	/* Initialize the console to provide early debug support */
	arm_console_boot_init();

	/* Allow BL1 to see the whole Trusted RAM */
	bl1_tzram_layout.total_base = ARM_BL_RAM_BASE;
	bl1_tzram_layout.total_size = ARM_BL_RAM_SIZE;

	#if TRANSFER_LIST
	secure_tl = transfer_list_ensure((void *)PLAT_ARM_EL3_FW_HANDOFF_BASE,
	PLAT_ARM_FW_HANDOFF_SIZE);
	assert(secure_tl != NULL);
	#endif
	}

	void bl1_early_platform_setup(void)
	{
	arm_bl1_early_platform_setup();

	/*
	* Initialize Interconnect for this cluster during cold boot.
	* No need for locks as no other CPU is active.
	*/
	plat_arm_interconnect_init();
	/*
	* Enable Interconnect coherency for the primary CPU's cluster.
	*/
	plat_arm_interconnect_enter_coherency();
	}

	/******************************************************************************
	* Perform the very early platform specific architecture setup shared between
	* ARM standard platforms. This only does basic initialization. Later
	* architectural setup (bl1_arch_setup()) does not do anything platform
	* specific.
	*****************************************************************************/
	void arm_bl1_plat_arch_setup(void)
	{
	#if USE_COHERENT_MEM
	/* Ensure ARM platforms don't use coherent memory in BL1. */
	assert((BL_COHERENT_RAM_END - BL_COHERENT_RAM_BASE) == 0U);
	#endif

	const mmap_region_t bl_regions[] = {
	MAP_BL1_TOTAL,
	MAP_BL1_RO,
	#if USE_ROMLIB
	ARM_MAP_ROMLIB_CODE,
	ARM_MAP_ROMLIB_DATA,
	#endif
	{0}
	};

	setup_page_tables(bl_regions, plat_arm_get_mmap());
	#ifdef __aarch64__
	enable_mmu_el3(0);
	#else
	enable_mmu_svc_mon(0);
	#endif /* __aarch64__ */

	arm_setup_romlib();
	}

	void bl1_plat_arch_setup(void)
	{
	arm_bl1_plat_arch_setup();
	}

	/*
	* Perform the platform specific architecture setup shared between
	* ARM standard platforms.
	*/
	void arm_bl1_platform_setup(void)
	{
	const struct dyn_cfg_dtb_info_t *config_info __unused;
	uint32_t fw_config_max_size __unused;
	image_info_t config_image_info __unused;
	struct transfer_list_entry *te __unused;

	image_desc_t *desc;

	int err __unused = 1;

	/* Initialise the IO layer and register platform IO devices */
	plat_arm_io_setup();

	/* Check if we need FWU before further processing */
	is_fwu_needed = plat_arm_bl1_fwu_needed();
	if (is_fwu_needed) {
	ERROR("Skip platform setup as FWU detected\n");
	return;
	}

	#if TRANSFER_LIST
	#if CRYPTO_SUPPORT
	te = transfer_list_add(secure_tl, TL_TAG_MBEDTLS_HEAP_INFO,
	sizeof(struct crypto_heap_info), NULL);
	assert(te != NULL);

	struct crypto_heap_info *heap_info =
	(struct crypto_heap_info *)transfer_list_entry_data(te);
	arm_get_mbedtls_heap(&heap_info->addr, &heap_info->size);
	#endif /* CRYPTO_SUPPORT */

	desc = bl1_plat_get_image_desc(BL2_IMAGE_ID);

	/*
	* The event log might have been updated prior to this, make sure we have an
	* up to date tl before setting the handoff arguments.
	*/
	transfer_list_update_checksum(secure_tl);
	transfer_list_set_handoff_args(secure_tl, &desc->ep_info);
	#else
	/* Set global DTB info for fixed fw_config information */
	fw_config_max_size = ARM_FW_CONFIG_LIMIT - ARM_FW_CONFIG_BASE;
	set_config_info(ARM_FW_CONFIG_BASE, ~0UL, fw_config_max_size, FW_CONFIG_ID);

	/* Fill the device tree information struct with the info from the config dtb */
	err = fconf_load_config(FW_CONFIG_ID);
	if (err < 0) {
	ERROR("Loading of FW_CONFIG failed %d\n", err);
	plat_error_handler(err);
	}

	/*
	* FW_CONFIG loaded successfully. If FW_CONFIG device tree parsing
	* is successful then load TB_FW_CONFIG device tree.
	*/
	config_info = FCONF_GET_PROPERTY(dyn_cfg, dtb, FW_CONFIG_ID);
	if (config_info != NULL) {
	err = fconf_populate_dtb_registry(config_info->config_addr);
	if (err < 0) {
	ERROR("Parsing of FW_CONFIG failed %d\n", err);
	plat_error_handler(err);
	}

	/* load TB_FW_CONFIG */
	err = fconf_load_config(TB_FW_CONFIG_ID);
	if (err < 0) {
	ERROR("Loading of TB_FW_CONFIG failed %d\n", err);
	plat_error_handler(err);
	}
	} else {
	ERROR("Invalid FW_CONFIG address\n");
	plat_error_handler(err);
	}

	desc = bl1_plat_get_image_desc(BL2_IMAGE_ID);

	/* The BL2 ep_info arg0 is modified to point to FW_CONFIG */
	assert(desc != NULL);
	desc->ep_info.args.arg0 = config_info->config_addr;

	#if CRYPTO_SUPPORT
	/* Share the Mbed TLS heap info with other images */
	arm_bl1_set_mbedtls_heap();
	#endif /* CRYPTO_SUPPORT */
	#endif /* TRANSFER_LIST */

	/*
	* Allow access to the System counter timer module and program
	* counter frequency for non secure images during FWU
	*/
	#ifdef ARM_SYS_TIMCTL_BASE
	arm_configure_sys_timer();
	#endif
	#if (ARM_ARCH_MAJOR > 7) \|\| defined(ARMV7_SUPPORTS_GENERIC_TIMER)
	write_cntfrq_el0(plat_get_syscnt_freq2());
	#endif
	}

	void bl1_plat_prepare_exit(entry_point_info_t *ep_info)
	{
	#if !ARM_DISABLE_TRUSTED_WDOG
	/* Disable watchdog before leaving BL1 */
	plat_arm_secure_wdt_stop();
	#endif

	#ifdef EL3_PAYLOAD_BASE
	/*
	* Program the EL3 payload's entry point address into the CPUs mailbox
	* in order to release secondary CPUs from their holding pen and make
	* them jump there.
	*/
	plat_arm_program_trusted_mailbox(ep_info->pc);
	dsbsy();
	sev();
	#endif
	}

	/*
	* On Arm platforms, the FWU process is triggered when the FIP image has
	* been tampered with.
	*/
	bool plat_arm_bl1_fwu_needed(void)
	{
	return !arm_io_is_toc_valid();
	}

	/*******************************************************************************
	* The following function checks if Firmware update is needed,
	* by checking if TOC in FIP image is valid or not.
	******************************************************************************/
	unsigned int bl1_plat_get_next_image_id(void)
	{
	return is_fwu_needed ? NS_BL1U_IMAGE_ID : BL2_IMAGE_ID;
	}

	// Use the default implementation of this function when Firmware Handoff is
	// disabled to avoid duplicating its logic.
	#if TRANSFER_LIST
	int bl1_plat_handle_post_image_load(unsigned int image_id)
	{
	image_desc_t *image_desc __unused;

	assert(image_id == BL2_IMAGE_ID);
	struct transfer_list_entry *te;

	/* Convey this information to BL2 via its TL. */
	te = transfer_list_add(secure_tl, TL_TAG_SRAM_LAYOUT64,
	sizeof(meminfo_t), NULL);
	assert(te != NULL);

	bl1_plat_calc_bl2_layout(&bl1_tzram_layout,
	(meminfo_t *)transfer_list_entry_data(te));

	transfer_list_update_checksum(secure_tl);

	/**
	* Before exiting make sure the contents of the TL are flushed in case there's no
	* support for hardware cache coherency.
	*/
	flush_dcache_range((uintptr_t)secure_tl, secure_tl->size);
	return 0;
	}
	#endif /* TRANSFER_LIST*/