| /* |
| * Copyright (c) 2015-2022, ARM Limited and Contributors. All rights reserved. |
| * |
| * SPDX-License-Identifier: BSD-3-Clause |
| */ |
| |
| #include <assert.h> |
| #include <string.h> |
| |
| #include <arch_helpers.h> |
| #include <common/debug.h> |
| #include <common/desc_image_load.h> |
| #include <drivers/fwu/fwu.h> |
| #include <drivers/fwu/fwu_metadata.h> |
| #include <drivers/io/io_block.h> |
| #include <drivers/io/io_driver.h> |
| #include <drivers/io/io_encrypted.h> |
| #include <drivers/io/io_fip.h> |
| #include <drivers/io/io_memmap.h> |
| #include <drivers/io/io_mtd.h> |
| #include <drivers/io/io_storage.h> |
| #include <drivers/mmc.h> |
| #include <drivers/partition/efi.h> |
| #include <drivers/partition/partition.h> |
| #include <drivers/raw_nand.h> |
| #include <drivers/spi_nand.h> |
| #include <drivers/spi_nor.h> |
| #include <drivers/st/io_mmc.h> |
| #include <drivers/st/stm32_fmc2_nand.h> |
| #include <drivers/st/stm32_qspi.h> |
| #include <drivers/st/stm32_sdmmc2.h> |
| #include <drivers/usb_device.h> |
| #include <lib/fconf/fconf.h> |
| #include <lib/mmio.h> |
| #include <lib/utils.h> |
| #include <plat/common/platform.h> |
| #include <tools_share/firmware_image_package.h> |
| |
| #include <platform_def.h> |
| #include <stm32cubeprogrammer.h> |
| #include <stm32mp_efi.h> |
| #include <stm32mp_fconf_getter.h> |
| #include <stm32mp_io_storage.h> |
| #include <usb_dfu.h> |
| |
| /* IO devices */ |
| uintptr_t fip_dev_handle; |
| uintptr_t storage_dev_handle; |
| |
| static const io_dev_connector_t *fip_dev_con; |
| |
| #ifndef DECRYPTION_SUPPORT_none |
| static const io_dev_connector_t *enc_dev_con; |
| uintptr_t enc_dev_handle; |
| #endif |
| |
| #if STM32MP_SDMMC || STM32MP_EMMC |
| static struct mmc_device_info mmc_info; |
| |
| static uint32_t block_buffer[MMC_BLOCK_SIZE] __aligned(MMC_BLOCK_SIZE); |
| |
| static io_block_dev_spec_t mmc_block_dev_spec = { |
| /* It's used as temp buffer in block driver */ |
| .buffer = { |
| .offset = (size_t)&block_buffer, |
| .length = MMC_BLOCK_SIZE, |
| }, |
| .ops = { |
| .read = mmc_read_blocks, |
| .write = NULL, |
| }, |
| .block_size = MMC_BLOCK_SIZE, |
| }; |
| |
| static const io_dev_connector_t *mmc_dev_con; |
| #endif /* STM32MP_SDMMC || STM32MP_EMMC */ |
| |
| #if STM32MP_SPI_NOR |
| static io_mtd_dev_spec_t spi_nor_dev_spec = { |
| .ops = { |
| .init = spi_nor_init, |
| .read = spi_nor_read, |
| }, |
| }; |
| #endif |
| |
| #if STM32MP_RAW_NAND |
| static io_mtd_dev_spec_t nand_dev_spec = { |
| .ops = { |
| .init = nand_raw_init, |
| .read = nand_read, |
| .seek = nand_seek_bb |
| }, |
| }; |
| |
| static const io_dev_connector_t *nand_dev_con; |
| #endif |
| |
| #if STM32MP_SPI_NAND |
| static io_mtd_dev_spec_t spi_nand_dev_spec = { |
| .ops = { |
| .init = spi_nand_init, |
| .read = nand_read, |
| .seek = nand_seek_bb |
| }, |
| }; |
| #endif |
| |
| #if STM32MP_SPI_NAND || STM32MP_SPI_NOR |
| static const io_dev_connector_t *spi_dev_con; |
| #endif |
| |
| #if STM32MP_UART_PROGRAMMER || STM32MP_USB_PROGRAMMER |
| static const io_dev_connector_t *memmap_dev_con; |
| #endif |
| |
| io_block_spec_t image_block_spec = { |
| .offset = 0U, |
| .length = 0U, |
| }; |
| |
| int open_fip(const uintptr_t spec) |
| { |
| return io_dev_init(fip_dev_handle, (uintptr_t)FIP_IMAGE_ID); |
| } |
| |
| #ifndef DECRYPTION_SUPPORT_none |
| int open_enc_fip(const uintptr_t spec) |
| { |
| int result; |
| uintptr_t local_image_handle; |
| |
| result = io_dev_init(enc_dev_handle, (uintptr_t)ENC_IMAGE_ID); |
| if (result != 0) { |
| return result; |
| } |
| |
| result = io_open(enc_dev_handle, spec, &local_image_handle); |
| if (result != 0) { |
| return result; |
| } |
| |
| VERBOSE("Using encrypted FIP\n"); |
| io_close(local_image_handle); |
| |
| return 0; |
| } |
| #endif |
| |
| int open_storage(const uintptr_t spec) |
| { |
| return io_dev_init(storage_dev_handle, 0); |
| } |
| |
| #if STM32MP_EMMC_BOOT |
| static uint32_t get_boot_part_fip_header(void) |
| { |
| io_block_spec_t emmc_boot_fip_block_spec = { |
| .offset = STM32MP_EMMC_BOOT_FIP_OFFSET, |
| .length = MMC_BLOCK_SIZE, /* We are interested only in first 4 bytes */ |
| }; |
| uint32_t magic = 0U; |
| int io_result; |
| size_t bytes_read; |
| uintptr_t fip_hdr_handle; |
| |
| io_result = io_open(storage_dev_handle, (uintptr_t)&emmc_boot_fip_block_spec, |
| &fip_hdr_handle); |
| assert(io_result == 0); |
| |
| io_result = io_read(fip_hdr_handle, (uintptr_t)&magic, sizeof(magic), |
| &bytes_read); |
| if ((io_result != 0) || (bytes_read != sizeof(magic))) { |
| panic(); |
| } |
| |
| io_close(fip_hdr_handle); |
| |
| VERBOSE("%s: eMMC boot magic at offset 256K: %08x\n", |
| __func__, magic); |
| |
| return magic; |
| } |
| #endif |
| |
| static void print_boot_device(boot_api_context_t *boot_context) |
| { |
| switch (boot_context->boot_interface_selected) { |
| case BOOT_API_CTX_BOOT_INTERFACE_SEL_FLASH_SD: |
| INFO("Using SDMMC\n"); |
| break; |
| case BOOT_API_CTX_BOOT_INTERFACE_SEL_FLASH_EMMC: |
| INFO("Using EMMC\n"); |
| break; |
| case BOOT_API_CTX_BOOT_INTERFACE_SEL_FLASH_NOR_QSPI: |
| INFO("Using QSPI NOR\n"); |
| break; |
| case BOOT_API_CTX_BOOT_INTERFACE_SEL_FLASH_NAND_FMC: |
| INFO("Using FMC NAND\n"); |
| break; |
| case BOOT_API_CTX_BOOT_INTERFACE_SEL_FLASH_NAND_QSPI: |
| INFO("Using SPI NAND\n"); |
| break; |
| case BOOT_API_CTX_BOOT_INTERFACE_SEL_SERIAL_UART: |
| INFO("Using UART\n"); |
| break; |
| case BOOT_API_CTX_BOOT_INTERFACE_SEL_SERIAL_USB: |
| INFO("Using USB\n"); |
| break; |
| default: |
| ERROR("Boot interface %u not found\n", |
| boot_context->boot_interface_selected); |
| panic(); |
| break; |
| } |
| |
| if (boot_context->boot_interface_instance != 0U) { |
| INFO(" Instance %d\n", boot_context->boot_interface_instance); |
| } |
| } |
| |
| #if STM32MP_SDMMC || STM32MP_EMMC |
| static void boot_mmc(enum mmc_device_type mmc_dev_type, |
| uint16_t boot_interface_instance) |
| { |
| int io_result __unused; |
| struct stm32_sdmmc2_params params; |
| |
| zeromem(¶ms, sizeof(struct stm32_sdmmc2_params)); |
| |
| mmc_info.mmc_dev_type = mmc_dev_type; |
| |
| switch (boot_interface_instance) { |
| case 1: |
| params.reg_base = STM32MP_SDMMC1_BASE; |
| break; |
| case 2: |
| params.reg_base = STM32MP_SDMMC2_BASE; |
| break; |
| case 3: |
| params.reg_base = STM32MP_SDMMC3_BASE; |
| break; |
| default: |
| WARN("SDMMC instance not found, using default\n"); |
| if (mmc_dev_type == MMC_IS_SD) { |
| params.reg_base = STM32MP_SDMMC1_BASE; |
| } else { |
| params.reg_base = STM32MP_SDMMC2_BASE; |
| } |
| break; |
| } |
| |
| if (mmc_dev_type != MMC_IS_EMMC) { |
| params.flags = MMC_FLAG_SD_CMD6; |
| } |
| |
| params.device_info = &mmc_info; |
| if (stm32_sdmmc2_mmc_init(¶ms) != 0) { |
| ERROR("SDMMC%u init failed\n", boot_interface_instance); |
| panic(); |
| } |
| |
| /* Open MMC as a block device to read FIP */ |
| io_result = register_io_dev_block(&mmc_dev_con); |
| if (io_result != 0) { |
| panic(); |
| } |
| |
| io_result = io_dev_open(mmc_dev_con, (uintptr_t)&mmc_block_dev_spec, |
| &storage_dev_handle); |
| assert(io_result == 0); |
| |
| #if STM32MP_EMMC_BOOT |
| if (mmc_dev_type == MMC_IS_EMMC) { |
| io_result = mmc_part_switch_current_boot(); |
| assert(io_result == 0); |
| |
| if (get_boot_part_fip_header() != TOC_HEADER_NAME) { |
| WARN("%s: Can't find FIP header on eMMC boot partition. Trying GPT\n", |
| __func__); |
| io_result = mmc_part_switch_user(); |
| assert(io_result == 0); |
| return; |
| } |
| |
| VERBOSE("%s: FIP header found on eMMC boot partition\n", |
| __func__); |
| image_block_spec.offset = STM32MP_EMMC_BOOT_FIP_OFFSET; |
| image_block_spec.length = mmc_boot_part_size() - STM32MP_EMMC_BOOT_FIP_OFFSET; |
| } |
| #endif |
| } |
| #endif /* STM32MP_SDMMC || STM32MP_EMMC */ |
| |
| #if STM32MP_SPI_NOR |
| static void boot_spi_nor(boot_api_context_t *boot_context) |
| { |
| int io_result __unused; |
| |
| io_result = stm32_qspi_init(); |
| assert(io_result == 0); |
| |
| io_result = register_io_dev_mtd(&spi_dev_con); |
| assert(io_result == 0); |
| |
| /* Open connections to device */ |
| io_result = io_dev_open(spi_dev_con, |
| (uintptr_t)&spi_nor_dev_spec, |
| &storage_dev_handle); |
| assert(io_result == 0); |
| } |
| #endif /* STM32MP_SPI_NOR */ |
| |
| #if STM32MP_RAW_NAND |
| static void boot_fmc2_nand(boot_api_context_t *boot_context) |
| { |
| int io_result __unused; |
| |
| io_result = stm32_fmc2_init(); |
| assert(io_result == 0); |
| |
| /* Register the IO device on this platform */ |
| io_result = register_io_dev_mtd(&nand_dev_con); |
| assert(io_result == 0); |
| |
| /* Open connections to device */ |
| io_result = io_dev_open(nand_dev_con, (uintptr_t)&nand_dev_spec, |
| &storage_dev_handle); |
| assert(io_result == 0); |
| } |
| #endif /* STM32MP_RAW_NAND */ |
| |
| #if STM32MP_SPI_NAND |
| static void boot_spi_nand(boot_api_context_t *boot_context) |
| { |
| int io_result __unused; |
| |
| io_result = stm32_qspi_init(); |
| assert(io_result == 0); |
| |
| io_result = register_io_dev_mtd(&spi_dev_con); |
| assert(io_result == 0); |
| |
| /* Open connections to device */ |
| io_result = io_dev_open(spi_dev_con, |
| (uintptr_t)&spi_nand_dev_spec, |
| &storage_dev_handle); |
| assert(io_result == 0); |
| } |
| #endif /* STM32MP_SPI_NAND */ |
| |
| #if STM32MP_UART_PROGRAMMER || STM32MP_USB_PROGRAMMER |
| static void mmap_io_setup(void) |
| { |
| int io_result __unused; |
| |
| io_result = register_io_dev_memmap(&memmap_dev_con); |
| assert(io_result == 0); |
| |
| io_result = io_dev_open(memmap_dev_con, (uintptr_t)NULL, |
| &storage_dev_handle); |
| assert(io_result == 0); |
| } |
| |
| #if STM32MP_UART_PROGRAMMER |
| static void stm32cubeprogrammer_uart(void) |
| { |
| int ret __unused; |
| boot_api_context_t *boot_context = |
| (boot_api_context_t *)stm32mp_get_boot_ctx_address(); |
| uintptr_t uart_base; |
| |
| uart_base = get_uart_address(boot_context->boot_interface_instance); |
| ret = stm32cubeprog_uart_load(uart_base, DWL_BUFFER_BASE, DWL_BUFFER_SIZE); |
| assert(ret == 0); |
| } |
| #endif |
| |
| #if STM32MP_USB_PROGRAMMER |
| static void stm32cubeprogrammer_usb(void) |
| { |
| int ret __unused; |
| struct usb_handle *pdev; |
| |
| /* Init USB on platform */ |
| pdev = usb_dfu_plat_init(); |
| |
| ret = stm32cubeprog_usb_load(pdev, DWL_BUFFER_BASE, DWL_BUFFER_SIZE); |
| assert(ret == 0); |
| } |
| #endif |
| #endif /* STM32MP_UART_PROGRAMMER || STM32MP_USB_PROGRAMMER */ |
| |
| |
| void stm32mp_io_setup(void) |
| { |
| int io_result __unused; |
| boot_api_context_t *boot_context = |
| (boot_api_context_t *)stm32mp_get_boot_ctx_address(); |
| |
| print_boot_device(boot_context); |
| |
| if ((boot_context->boot_partition_used_toboot == 1U) || |
| (boot_context->boot_partition_used_toboot == 2U)) { |
| INFO("Boot used partition fsbl%u\n", |
| boot_context->boot_partition_used_toboot); |
| } |
| |
| io_result = register_io_dev_fip(&fip_dev_con); |
| assert(io_result == 0); |
| |
| io_result = io_dev_open(fip_dev_con, (uintptr_t)NULL, |
| &fip_dev_handle); |
| |
| #ifndef DECRYPTION_SUPPORT_none |
| io_result = register_io_dev_enc(&enc_dev_con); |
| assert(io_result == 0); |
| |
| io_result = io_dev_open(enc_dev_con, (uintptr_t)NULL, |
| &enc_dev_handle); |
| assert(io_result == 0); |
| #endif |
| |
| switch (boot_context->boot_interface_selected) { |
| #if STM32MP_SDMMC |
| case BOOT_API_CTX_BOOT_INTERFACE_SEL_FLASH_SD: |
| dmbsy(); |
| boot_mmc(MMC_IS_SD, boot_context->boot_interface_instance); |
| break; |
| #endif |
| #if STM32MP_EMMC |
| case BOOT_API_CTX_BOOT_INTERFACE_SEL_FLASH_EMMC: |
| dmbsy(); |
| boot_mmc(MMC_IS_EMMC, boot_context->boot_interface_instance); |
| break; |
| #endif |
| #if STM32MP_SPI_NOR |
| case BOOT_API_CTX_BOOT_INTERFACE_SEL_FLASH_NOR_QSPI: |
| dmbsy(); |
| boot_spi_nor(boot_context); |
| break; |
| #endif |
| #if STM32MP_RAW_NAND |
| case BOOT_API_CTX_BOOT_INTERFACE_SEL_FLASH_NAND_FMC: |
| dmbsy(); |
| boot_fmc2_nand(boot_context); |
| break; |
| #endif |
| #if STM32MP_SPI_NAND |
| case BOOT_API_CTX_BOOT_INTERFACE_SEL_FLASH_NAND_QSPI: |
| dmbsy(); |
| boot_spi_nand(boot_context); |
| break; |
| #endif |
| #if STM32MP_UART_PROGRAMMER || STM32MP_USB_PROGRAMMER |
| #if STM32MP_UART_PROGRAMMER |
| case BOOT_API_CTX_BOOT_INTERFACE_SEL_SERIAL_UART: |
| #endif |
| #if STM32MP_USB_PROGRAMMER |
| case BOOT_API_CTX_BOOT_INTERFACE_SEL_SERIAL_USB: |
| #endif |
| dmbsy(); |
| mmap_io_setup(); |
| break; |
| #endif |
| |
| default: |
| ERROR("Boot interface %d not supported\n", |
| boot_context->boot_interface_selected); |
| panic(); |
| break; |
| } |
| } |
| |
| int bl2_plat_handle_pre_image_load(unsigned int image_id) |
| { |
| static bool gpt_init_done __unused; |
| uint16_t boot_itf = stm32mp_get_boot_itf_selected(); |
| |
| switch (boot_itf) { |
| #if STM32MP_SDMMC || STM32MP_EMMC |
| case BOOT_API_CTX_BOOT_INTERFACE_SEL_FLASH_EMMC: |
| #if STM32MP_EMMC_BOOT |
| if (image_block_spec.offset == STM32MP_EMMC_BOOT_FIP_OFFSET) { |
| break; |
| } |
| #endif |
| /* fallthrough */ |
| case BOOT_API_CTX_BOOT_INTERFACE_SEL_FLASH_SD: |
| if (!gpt_init_done) { |
| /* |
| * With FWU Multi Bank feature enabled, the selection of |
| * the image to boot will be done by fwu_init calling the |
| * platform hook, plat_fwu_set_images_source. |
| */ |
| #if !PSA_FWU_SUPPORT |
| const partition_entry_t *entry; |
| const struct efi_guid img_type_guid = STM32MP_FIP_GUID; |
| uuid_t img_type_uuid; |
| |
| guidcpy(&img_type_uuid, &img_type_guid); |
| partition_init(GPT_IMAGE_ID); |
| entry = get_partition_entry_by_type(&img_type_uuid); |
| if (entry == NULL) { |
| entry = get_partition_entry(FIP_IMAGE_NAME); |
| if (entry == NULL) { |
| ERROR("Could NOT find the %s partition!\n", |
| FIP_IMAGE_NAME); |
| |
| return -ENOENT; |
| } |
| } |
| |
| image_block_spec.offset = entry->start; |
| image_block_spec.length = entry->length; |
| #endif |
| gpt_init_done = true; |
| } else { |
| bl_mem_params_node_t *bl_mem_params = get_bl_mem_params_node(image_id); |
| assert(bl_mem_params != NULL); |
| |
| mmc_block_dev_spec.buffer.offset = bl_mem_params->image_info.image_base; |
| mmc_block_dev_spec.buffer.length = bl_mem_params->image_info.image_max_size; |
| } |
| |
| break; |
| #endif |
| |
| #if STM32MP_RAW_NAND || STM32MP_SPI_NAND |
| #if STM32MP_RAW_NAND |
| case BOOT_API_CTX_BOOT_INTERFACE_SEL_FLASH_NAND_FMC: |
| #endif |
| #if STM32MP_SPI_NAND |
| case BOOT_API_CTX_BOOT_INTERFACE_SEL_FLASH_NAND_QSPI: |
| #endif |
| image_block_spec.offset = STM32MP_NAND_FIP_OFFSET; |
| break; |
| #endif |
| |
| #if STM32MP_SPI_NOR |
| case BOOT_API_CTX_BOOT_INTERFACE_SEL_FLASH_NOR_QSPI: |
| image_block_spec.offset = STM32MP_NOR_FIP_OFFSET; |
| break; |
| #endif |
| |
| #if STM32MP_UART_PROGRAMMER |
| case BOOT_API_CTX_BOOT_INTERFACE_SEL_SERIAL_UART: |
| if (image_id == FW_CONFIG_ID) { |
| stm32cubeprogrammer_uart(); |
| /* FIP loaded at DWL address */ |
| image_block_spec.offset = DWL_BUFFER_BASE; |
| image_block_spec.length = DWL_BUFFER_SIZE; |
| } |
| break; |
| #endif |
| #if STM32MP_USB_PROGRAMMER |
| case BOOT_API_CTX_BOOT_INTERFACE_SEL_SERIAL_USB: |
| if (image_id == FW_CONFIG_ID) { |
| stm32cubeprogrammer_usb(); |
| /* FIP loaded at DWL address */ |
| image_block_spec.offset = DWL_BUFFER_BASE; |
| image_block_spec.length = DWL_BUFFER_SIZE; |
| } |
| break; |
| #endif |
| |
| default: |
| ERROR("FIP Not found\n"); |
| panic(); |
| } |
| |
| return 0; |
| } |
| |
| /* |
| * Return an IO device handle and specification which can be used to access |
| * an image. Use this to enforce platform load policy. |
| */ |
| int plat_get_image_source(unsigned int image_id, uintptr_t *dev_handle, |
| uintptr_t *image_spec) |
| { |
| int rc; |
| const struct plat_io_policy *policy; |
| |
| policy = FCONF_GET_PROPERTY(stm32mp, io_policies, image_id); |
| rc = policy->check(policy->image_spec); |
| if (rc == 0) { |
| *image_spec = policy->image_spec; |
| *dev_handle = *(policy->dev_handle); |
| } |
| |
| return rc; |
| } |
| |
| #if (STM32MP_SDMMC || STM32MP_EMMC) && PSA_FWU_SUPPORT |
| /* |
| * In each boot in non-trial mode, we set the BKP register to |
| * FWU_MAX_TRIAL_REBOOT, and return the active_index from metadata. |
| * |
| * As long as the update agent didn't update the "accepted" field in metadata |
| * (i.e. we are in trial mode), we select the new active_index. |
| * To avoid infinite boot loop at trial boot we decrement a BKP register. |
| * If this counter is 0: |
| * - an unexpected TAMPER event raised (that resets the BKP registers to 0) |
| * - a power-off occurs before the update agent was able to update the |
| * "accepted' field |
| * - we already boot FWU_MAX_TRIAL_REBOOT times in trial mode. |
| * we select the previous_active_index. |
| */ |
| #define INVALID_BOOT_IDX 0xFFFFFFFFU |
| |
| uint32_t plat_fwu_get_boot_idx(void) |
| { |
| /* |
| * Select boot index and update boot counter only once per boot |
| * even if this function is called several times. |
| */ |
| static uint32_t boot_idx = INVALID_BOOT_IDX; |
| const struct fwu_metadata *data; |
| |
| data = fwu_get_metadata(); |
| |
| if (boot_idx == INVALID_BOOT_IDX) { |
| boot_idx = data->active_index; |
| if (fwu_is_trial_run_state()) { |
| if (stm32_get_and_dec_fwu_trial_boot_cnt() == 0U) { |
| WARN("Trial FWU fails %u times\n", |
| FWU_MAX_TRIAL_REBOOT); |
| boot_idx = data->previous_active_index; |
| } |
| } else { |
| stm32_set_max_fwu_trial_boot_cnt(); |
| } |
| } |
| |
| return boot_idx; |
| } |
| |
| static void *stm32_get_image_spec(const uuid_t *img_type_uuid) |
| { |
| unsigned int i; |
| |
| for (i = 0U; i < MAX_NUMBER_IDS; i++) { |
| if ((guidcmp(&policies[i].img_type_guid, img_type_uuid)) == 0) { |
| return (void *)policies[i].image_spec; |
| } |
| } |
| |
| return NULL; |
| } |
| |
| void plat_fwu_set_images_source(const struct fwu_metadata *metadata) |
| { |
| unsigned int i; |
| uint32_t boot_idx; |
| const partition_entry_t *entry; |
| const uuid_t *img_type_uuid, *img_uuid; |
| io_block_spec_t *image_spec; |
| |
| boot_idx = plat_fwu_get_boot_idx(); |
| assert(boot_idx < NR_OF_FW_BANKS); |
| |
| for (i = 0U; i < NR_OF_IMAGES_IN_FW_BANK; i++) { |
| img_type_uuid = &metadata->img_entry[i].img_type_uuid; |
| image_spec = stm32_get_image_spec(img_type_uuid); |
| if (image_spec == NULL) { |
| ERROR("Unable to get image spec for the image in the metadata\n"); |
| panic(); |
| } |
| |
| img_uuid = |
| &metadata->img_entry[i].img_props[boot_idx].img_uuid; |
| |
| entry = get_partition_entry_by_uuid(img_uuid); |
| if (entry == NULL) { |
| ERROR("Unable to find the partition with the uuid mentioned in metadata\n"); |
| panic(); |
| } |
| |
| image_spec->offset = entry->start; |
| image_spec->length = entry->length; |
| } |
| } |
| |
| static int plat_set_image_source(unsigned int image_id, |
| uintptr_t *handle, |
| uintptr_t *image_spec, |
| const char *part_name) |
| { |
| struct plat_io_policy *policy; |
| io_block_spec_t *spec; |
| const partition_entry_t *entry = get_partition_entry(part_name); |
| |
| if (entry == NULL) { |
| ERROR("Unable to find the %s partition\n", part_name); |
| return -ENOENT; |
| } |
| |
| policy = &policies[image_id]; |
| |
| spec = (io_block_spec_t *)policy->image_spec; |
| spec->offset = entry->start; |
| spec->length = entry->length; |
| |
| *image_spec = policy->image_spec; |
| *handle = *policy->dev_handle; |
| |
| return 0; |
| } |
| |
| int plat_fwu_set_metadata_image_source(unsigned int image_id, |
| uintptr_t *handle, |
| uintptr_t *image_spec) |
| { |
| char *part_name; |
| |
| assert((image_id == FWU_METADATA_IMAGE_ID) || |
| (image_id == BKUP_FWU_METADATA_IMAGE_ID)); |
| |
| partition_init(GPT_IMAGE_ID); |
| |
| if (image_id == FWU_METADATA_IMAGE_ID) { |
| part_name = METADATA_PART_1; |
| } else { |
| part_name = METADATA_PART_2; |
| } |
| |
| return plat_set_image_source(image_id, handle, image_spec, |
| part_name); |
| } |
| #endif /* (STM32MP_SDMMC || STM32MP_EMMC) && PSA_FWU_SUPPORT */ |