fdts/rtsm_ve-motherboard.dtsi - filogic/atf - Gitiles

 /*
  * Copyright (c) 2013-2014, ARM Limited and Contributors. All rights reserved.
  *
  * Redistribution and use in source and binary forms, with or without
  * modification, are permitted provided that the following conditions are met:
  *
  * Redistributions of source code must retain the above copyright notice, this
  * list of conditions and the following disclaimer.
  *
  * Redistributions in binary form must reproduce the above copyright notice,
  * this list of conditions and the following disclaimer in the documentation
  * and/or other materials provided with the distribution.
  *
  * Neither the name of ARM nor the names of its contributors may be used
  * to endorse or promote products derived from this software without specific
  * prior written permission.
  *
  * THIS SOFTWARE IS PROVIDED BY THE COPYRIGHT HOLDERS AND CONTRIBUTORS "AS IS"
  * AND ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE
  * IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE
  * ARE DISCLAIMED. IN NO EVENT SHALL THE COPYRIGHT HOLDER OR CONTRIBUTORS BE
  * LIABLE FOR ANY DIRECT, INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY, OR
  * CONSEQUENTIAL DAMAGES (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF
  * SUBSTITUTE GOODS OR SERVICES; LOSS OF USE, DATA, OR PROFITS; OR BUSINESS
  * INTERRUPTION) HOWEVER CAUSED AND ON ANY THEORY OF LIABILITY, WHETHER IN
  * CONTRACT, STRICT LIABILITY, OR TORT (INCLUDING NEGLIGENCE OR OTHERWISE)
  * ARISING IN ANY WAY OUT OF THE USE OF THIS SOFTWARE, EVEN IF ADVISED OF THE
  * POSSIBILITY OF SUCH DAMAGE.
  */

 	motherboard {
 		arm,v2m-memory-map = "rs1";
 		compatible = "arm,vexpress,v2m-p1", "simple-bus";
 		#address-cells = <2>; /* SMB chipselect number and offset */
 		#size-cells = <1>;
 		#interrupt-cells = <1>;
 		ranges;

 		flash@0,00000000 {
 			compatible = "arm,vexpress-flash", "cfi-flash";
 			reg = <0 0x00000000 0x04000000>,
 			      <4 0x00000000 0x04000000>;
 			bank-width = <4>;
 		};

 		vram@2,00000000 {
 			compatible = "arm,vexpress-vram";
 			reg = <2 0x00000000 0x00800000>;
 		};

 		ethernet@2,02000000 {
 			compatible = "smsc,lan91c111";
 			reg = <2 0x02000000 0x10000>;
 			interrupts = <15>;
 		};

 		v2m_clk24mhz: clk24mhz {
 			compatible = "fixed-clock";
 			#clock-cells = <0>;
 			clock-frequency = <24000000>;
 			clock-output-names = "v2m:clk24mhz";
 		};

 		v2m_refclk1mhz: refclk1mhz {
 			compatible = "fixed-clock";
 			#clock-cells = <0>;
 			clock-frequency = <1000000>;
 			clock-output-names = "v2m:refclk1mhz";
 		};

 		v2m_refclk32khz: refclk32khz {
 			compatible = "fixed-clock";
 			#clock-cells = <0>;
 			clock-frequency = <32768>;
 			clock-output-names = "v2m:refclk32khz";
 		};

 		iofpga@3,00000000 {
 			compatible = "arm,amba-bus", "simple-bus";
 			#address-cells = <1>;
 			#size-cells = <1>;
 			ranges = <0 3 0 0x200000>;

 			v2m_sysreg: sysreg@010000 {
 				compatible = "arm,vexpress-sysreg";
 				reg = <0x010000 0x1000>;
 				gpio-controller;
 				#gpio-cells = <2>;
 			};

 			v2m_sysctl: sysctl@020000 {
 				compatible = "arm,sp810", "arm,primecell";
 				reg = <0x020000 0x1000>;
 				clocks = <&v2m_refclk32khz>, <&v2m_refclk1mhz>, <&v2m_clk24mhz>;
 				clock-names = "refclk", "timclk", "apb_pclk";
 				#clock-cells = <1>;
 				clock-output-names = "timerclken0", "timerclken1", "timerclken2", "timerclken3";
 			};

 			aaci@040000 {
 				compatible = "arm,pl041", "arm,primecell";
 				reg = <0x040000 0x1000>;
 				interrupts = <11>;
 				clocks = <&v2m_clk24mhz>;
 				clock-names = "apb_pclk";
 			};

 			mmci@050000 {
 				compatible = "arm,pl180", "arm,primecell";
 				reg = <0x050000 0x1000>;
 				interrupts = <9 10>;
 				cd-gpios = <&v2m_sysreg 0 0>;
 				wp-gpios = <&v2m_sysreg 1 0>;
 				max-frequency = <12000000>;
 				vmmc-supply = <&v2m_fixed_3v3>;
 				clocks = <&v2m_clk24mhz>, <&v2m_clk24mhz>;
 				clock-names = "mclk", "apb_pclk";
 			};

 			kmi@060000 {
 				compatible = "arm,pl050", "arm,primecell";
 				reg = <0x060000 0x1000>;
 				interrupts = <12>;
 				clocks = <&v2m_clk24mhz>, <&v2m_clk24mhz>;
 				clock-names = "KMIREFCLK", "apb_pclk";
 			};

 			kmi@070000 {
 				compatible = "arm,pl050", "arm,primecell";
 				reg = <0x070000 0x1000>;
 				interrupts = <13>;
 				clocks = <&v2m_clk24mhz>, <&v2m_clk24mhz>;
 				clock-names = "KMIREFCLK", "apb_pclk";
 			};

 			v2m_serial0: uart@090000 {
 				compatible = "arm,pl011", "arm,primecell";
 				reg = <0x090000 0x1000>;
 				interrupts = <5>;
 				clocks = <&v2m_clk24mhz>, <&v2m_clk24mhz>;
 				clock-names = "uartclk", "apb_pclk";
 			};

 			v2m_serial1: uart@0a0000 {
 				compatible = "arm,pl011", "arm,primecell";
 				reg = <0x0a0000 0x1000>;
 				interrupts = <6>;
 				clocks = <&v2m_clk24mhz>, <&v2m_clk24mhz>;
 				clock-names = "uartclk", "apb_pclk";
 			};

 			v2m_serial2: uart@0b0000 {
 				compatible = "arm,pl011", "arm,primecell";
 				reg = <0x0b0000 0x1000>;
 				interrupts = <7>;
 				clocks = <&v2m_clk24mhz>, <&v2m_clk24mhz>;
 				clock-names = "uartclk", "apb_pclk";
 			};

 			v2m_serial3: uart@0c0000 {
 				compatible = "arm,pl011", "arm,primecell";
 				reg = <0x0c0000 0x1000>;
 				interrupts = <8>;
 				clocks = <&v2m_clk24mhz>, <&v2m_clk24mhz>;
 				clock-names = "uartclk", "apb_pclk";
 			};

 			wdt@0f0000 {
 				compatible = "arm,sp805", "arm,primecell";
 				reg = <0x0f0000 0x1000>;
 				interrupts = <0>;
 				clocks = <&v2m_refclk32khz>, <&v2m_clk24mhz>;
 				clock-names = "wdogclk", "apb_pclk";
 			};

 			v2m_timer01: timer@110000 {
 				compatible = "arm,sp804", "arm,primecell";
 				reg = <0x110000 0x1000>;
 				interrupts = <2>;
 				clocks = <&v2m_sysctl 0>, <&v2m_sysctl 1>, <&v2m_clk24mhz>;
 				clock-names = "timclken1", "timclken2", "apb_pclk";
 			};

 			v2m_timer23: timer@120000 {
 				compatible = "arm,sp804", "arm,primecell";
 				reg = <0x120000 0x1000>;
 				interrupts = <3>;
 				clocks = <&v2m_sysctl 2>, <&v2m_sysctl 3>, <&v2m_clk24mhz>;
 				clock-names = "timclken1", "timclken2", "apb_pclk";
 			};

 			rtc@170000 {
 				compatible = "arm,pl031", "arm,primecell";
 				reg = <0x170000 0x1000>;
 				interrupts = <4>;
 				clocks = <&v2m_clk24mhz>;
 				clock-names = "apb_pclk";
 			};

 			clcd@1f0000 {
 				compatible = "arm,pl111", "arm,primecell";
 				reg = <0x1f0000 0x1000>;
 				interrupts = <14>;
 				clocks = <&v2m_oscclk1>, <&v2m_clk24mhz>;
 				clock-names = "clcdclk", "apb_pclk";
 				mode = "XVGA";
 				use_dma = <0>;
 				framebuffer = <0x18000000 0x00180000>;
 			};

 			virtio_block@0130000 {
 				compatible = "virtio,mmio";
 				reg = <0x130000 0x1000>;
 				interrupts = <0x2a>;
 			};
 		};

 		v2m_fixed_3v3: fixedregulator@0 {
 			compatible = "regulator-fixed";
 			regulator-name = "3V3";
 			regulator-min-microvolt = <3300000>;
 			regulator-max-microvolt = <3300000>;
 			regulator-always-on;
 		};

 		mcc {
 			compatible = "arm,vexpress,config-bus", "simple-bus";
 			arm,vexpress,config-bridge = <&v2m_sysreg>;

 			v2m_oscclk1: osc@1 {
 				/* CLCD clock */
 				compatible = "arm,vexpress-osc";
 				arm,vexpress-sysreg,func = <1 1>;
 				freq-range = <23750000 63500000>;
 				#clock-cells = <0>;
 				clock-output-names = "v2m:oscclk1";
 			};

 			/*
 			 * Not supported in FVP models
 			 *
 			 * reset@0 {
 			 * 	compatible = "arm,vexpress-reset";
 			 * 	arm,vexpress-sysreg,func = <5 0>;
 			 * };
 			 */

 			muxfpga@0 {
 				compatible = "arm,vexpress-muxfpga";
 				arm,vexpress-sysreg,func = <7 0>;
 			};

 			/*
 			 * Not used - Superseded by PSCI sys_poweroff
 			 *
 			 * shutdown@0 {
 			 * 	compatible = "arm,vexpress-shutdown";
 			 * 	arm,vexpress-sysreg,func = <8 0>;
 			 * };
 			 */

 			/*
 			 * Not used - Superseded by PSCI sys_reset
 			 *
 			 * reboot@0 {
 			 * 	compatible = "arm,vexpress-reboot";
 			 * 	arm,vexpress-sysreg,func = <9 0>;
 			 * };
 			 */

 			dvimode@0 {
 				compatible = "arm,vexpress-dvimode";
 				arm,vexpress-sysreg,func = <11 0>;
 			};
 		};
 	};
	/*
	* Copyright (c) 2013-2014, ARM Limited and Contributors. All rights reserved.
	*
	* Redistribution and use in source and binary forms, with or without
	* modification, are permitted provided that the following conditions are met:
	*
	* Redistributions of source code must retain the above copyright notice, this
	* list of conditions and the following disclaimer.
	*
	* Redistributions in binary form must reproduce the above copyright notice,
	* this list of conditions and the following disclaimer in the documentation
	* and/or other materials provided with the distribution.
	*
	* Neither the name of ARM nor the names of its contributors may be used
	* to endorse or promote products derived from this software without specific
	* prior written permission.
	*
	* THIS SOFTWARE IS PROVIDED BY THE COPYRIGHT HOLDERS AND CONTRIBUTORS "AS IS"
	* AND ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE
	* IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE
	* ARE DISCLAIMED. IN NO EVENT SHALL THE COPYRIGHT HOLDER OR CONTRIBUTORS BE
	* LIABLE FOR ANY DIRECT, INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY, OR
	* CONSEQUENTIAL DAMAGES (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF
	* SUBSTITUTE GOODS OR SERVICES; LOSS OF USE, DATA, OR PROFITS; OR BUSINESS
	* INTERRUPTION) HOWEVER CAUSED AND ON ANY THEORY OF LIABILITY, WHETHER IN
	* CONTRACT, STRICT LIABILITY, OR TORT (INCLUDING NEGLIGENCE OR OTHERWISE)
	* ARISING IN ANY WAY OUT OF THE USE OF THIS SOFTWARE, EVEN IF ADVISED OF THE
	* POSSIBILITY OF SUCH DAMAGE.
	*/

	motherboard {
	arm,v2m-memory-map = "rs1";
	compatible = "arm,vexpress,v2m-p1", "simple-bus";
	#address-cells = <2>; /* SMB chipselect number and offset */
	#size-cells = <1>;
	#interrupt-cells = <1>;
	ranges;

	flash@0,00000000 {
	compatible = "arm,vexpress-flash", "cfi-flash";
	reg = <0 0x00000000 0x04000000>,
	<4 0x00000000 0x04000000>;
	bank-width = <4>;
	};

	vram@2,00000000 {
	compatible = "arm,vexpress-vram";
	reg = <2 0x00000000 0x00800000>;
	};

	ethernet@2,02000000 {
	compatible = "smsc,lan91c111";
	reg = <2 0x02000000 0x10000>;
	interrupts = <15>;
	};

	v2m_clk24mhz: clk24mhz {
	compatible = "fixed-clock";
	#clock-cells = <0>;
	clock-frequency = <24000000>;
	clock-output-names = "v2m:clk24mhz";
	};

	v2m_refclk1mhz: refclk1mhz {
	compatible = "fixed-clock";
	#clock-cells = <0>;
	clock-frequency = <1000000>;
	clock-output-names = "v2m:refclk1mhz";
	};

	v2m_refclk32khz: refclk32khz {
	compatible = "fixed-clock";
	#clock-cells = <0>;
	clock-frequency = <32768>;
	clock-output-names = "v2m:refclk32khz";
	};

	iofpga@3,00000000 {
	compatible = "arm,amba-bus", "simple-bus";
	#address-cells = <1>;
	#size-cells = <1>;
	ranges = <0 3 0 0x200000>;

	v2m_sysreg: sysreg@010000 {
	compatible = "arm,vexpress-sysreg";
	reg = <0x010000 0x1000>;
	gpio-controller;
	#gpio-cells = <2>;
	};

	v2m_sysctl: sysctl@020000 {
	compatible = "arm,sp810", "arm,primecell";
	reg = <0x020000 0x1000>;
	clocks = <&v2m_refclk32khz>, <&v2m_refclk1mhz>, <&v2m_clk24mhz>;
	clock-names = "refclk", "timclk", "apb_pclk";
	#clock-cells = <1>;
	clock-output-names = "timerclken0", "timerclken1", "timerclken2", "timerclken3";
	};

	aaci@040000 {
	compatible = "arm,pl041", "arm,primecell";
	reg = <0x040000 0x1000>;
	interrupts = <11>;
	clocks = <&v2m_clk24mhz>;
	clock-names = "apb_pclk";
	};

	mmci@050000 {
	compatible = "arm,pl180", "arm,primecell";
	reg = <0x050000 0x1000>;
	interrupts = <9 10>;
	cd-gpios = <&v2m_sysreg 0 0>;
	wp-gpios = <&v2m_sysreg 1 0>;
	max-frequency = <12000000>;
	vmmc-supply = <&v2m_fixed_3v3>;
	clocks = <&v2m_clk24mhz>, <&v2m_clk24mhz>;
	clock-names = "mclk", "apb_pclk";
	};

	kmi@060000 {
	compatible = "arm,pl050", "arm,primecell";
	reg = <0x060000 0x1000>;
	interrupts = <12>;
	clocks = <&v2m_clk24mhz>, <&v2m_clk24mhz>;
	clock-names = "KMIREFCLK", "apb_pclk";
	};

	kmi@070000 {
	compatible = "arm,pl050", "arm,primecell";
	reg = <0x070000 0x1000>;
	interrupts = <13>;
	clocks = <&v2m_clk24mhz>, <&v2m_clk24mhz>;
	clock-names = "KMIREFCLK", "apb_pclk";
	};

	v2m_serial0: uart@090000 {
	compatible = "arm,pl011", "arm,primecell";
	reg = <0x090000 0x1000>;
	interrupts = <5>;
	clocks = <&v2m_clk24mhz>, <&v2m_clk24mhz>;
	clock-names = "uartclk", "apb_pclk";
	};

	v2m_serial1: uart@0a0000 {
	compatible = "arm,pl011", "arm,primecell";
	reg = <0x0a0000 0x1000>;
	interrupts = <6>;
	clocks = <&v2m_clk24mhz>, <&v2m_clk24mhz>;
	clock-names = "uartclk", "apb_pclk";
	};

	v2m_serial2: uart@0b0000 {
	compatible = "arm,pl011", "arm,primecell";
	reg = <0x0b0000 0x1000>;
	interrupts = <7>;
	clocks = <&v2m_clk24mhz>, <&v2m_clk24mhz>;
	clock-names = "uartclk", "apb_pclk";
	};

	v2m_serial3: uart@0c0000 {
	compatible = "arm,pl011", "arm,primecell";
	reg = <0x0c0000 0x1000>;
	interrupts = <8>;
	clocks = <&v2m_clk24mhz>, <&v2m_clk24mhz>;
	clock-names = "uartclk", "apb_pclk";
	};

	wdt@0f0000 {
	compatible = "arm,sp805", "arm,primecell";
	reg = <0x0f0000 0x1000>;
	interrupts = <0>;
	clocks = <&v2m_refclk32khz>, <&v2m_clk24mhz>;
	clock-names = "wdogclk", "apb_pclk";
	};

	v2m_timer01: timer@110000 {
	compatible = "arm,sp804", "arm,primecell";
	reg = <0x110000 0x1000>;
	interrupts = <2>;
	clocks = <&v2m_sysctl 0>, <&v2m_sysctl 1>, <&v2m_clk24mhz>;
	clock-names = "timclken1", "timclken2", "apb_pclk";
	};

	v2m_timer23: timer@120000 {
	compatible = "arm,sp804", "arm,primecell";
	reg = <0x120000 0x1000>;
	interrupts = <3>;
	clocks = <&v2m_sysctl 2>, <&v2m_sysctl 3>, <&v2m_clk24mhz>;
	clock-names = "timclken1", "timclken2", "apb_pclk";
	};

	rtc@170000 {
	compatible = "arm,pl031", "arm,primecell";
	reg = <0x170000 0x1000>;
	interrupts = <4>;
	clocks = <&v2m_clk24mhz>;
	clock-names = "apb_pclk";
	};

	clcd@1f0000 {
	compatible = "arm,pl111", "arm,primecell";
	reg = <0x1f0000 0x1000>;
	interrupts = <14>;
	clocks = <&v2m_oscclk1>, <&v2m_clk24mhz>;
	clock-names = "clcdclk", "apb_pclk";
	mode = "XVGA";
	use_dma = <0>;
	framebuffer = <0x18000000 0x00180000>;
	};

	virtio_block@0130000 {
	compatible = "virtio,mmio";
	reg = <0x130000 0x1000>;
	interrupts = <0x2a>;
	};
	};

	v2m_fixed_3v3: fixedregulator@0 {
	compatible = "regulator-fixed";
	regulator-name = "3V3";
	regulator-min-microvolt = <3300000>;
	regulator-max-microvolt = <3300000>;
	regulator-always-on;
	};

	mcc {
	compatible = "arm,vexpress,config-bus", "simple-bus";
	arm,vexpress,config-bridge = <&v2m_sysreg>;

	v2m_oscclk1: osc@1 {
	/* CLCD clock */
	compatible = "arm,vexpress-osc";
	arm,vexpress-sysreg,func = <1 1>;
	freq-range = <23750000 63500000>;
	#clock-cells = <0>;
	clock-output-names = "v2m:oscclk1";
	};

	/*
	* Not supported in FVP models
	*
	* reset@0 {
	* compatible = "arm,vexpress-reset";
	* arm,vexpress-sysreg,func = <5 0>;
	* };
	*/

	muxfpga@0 {
	compatible = "arm,vexpress-muxfpga";
	arm,vexpress-sysreg,func = <7 0>;
	};

	/*
	* Not used - Superseded by PSCI sys_poweroff
	*
	* shutdown@0 {
	* compatible = "arm,vexpress-shutdown";
	* arm,vexpress-sysreg,func = <8 0>;
	* };
	*/

	/*
	* Not used - Superseded by PSCI sys_reset
	*
	* reboot@0 {
	* compatible = "arm,vexpress-reboot";
	* arm,vexpress-sysreg,func = <9 0>;
	* };
	*/

	dvimode@0 {
	compatible = "arm,vexpress-dvimode";
	arm,vexpress-sysreg,func = <11 0>;
	};
	};
	};