| /* |
| * Copyright (c) 2017-2018, ARM Limited and Contributors. All rights reserved. |
| * |
| * SPDX-License-Identifier: BSD-3-Clause |
| */ |
| |
| #ifndef HIKEY_LAYOUT_H |
| #define HIKEY_LAYOUT_H |
| |
| /* |
| * Platform memory map related constants |
| */ |
| #define XG2RAM0_BASE 0xF9800000 |
| #define XG2RAM0_SIZE 0x00400000 |
| |
| /* |
| * BL1 is stored in XG2RAM0_HIRQ that is 784KB large (0xF980_0000~0xF98C_4000). |
| */ |
| #define ONCHIPROM_PARAM_BASE (XG2RAM0_BASE + 0x700) |
| #define LOADER_RAM_BASE (XG2RAM0_BASE + 0x800) |
| #define BL1_XG2RAM0_OFFSET 0x1000 |
| |
| /* |
| * BL1 specific defines. |
| * |
| * Both loader and BL1_RO region stay in SRAM since they are used to simulate |
| * ROM. |
| * Loader is used to switch Hi6220 SoC from 32-bit to 64-bit mode. |
| * |
| * ++++++++++ 0xF980_0000 |
| * + loader + |
| * ++++++++++ 0xF980_1000 |
| * + BL1_RO + |
| * ++++++++++ 0xF981_8000 |
| * + BL1_RW + |
| * ++++++++++ 0xF989_8000 |
| */ |
| #define BL1_RO_BASE (XG2RAM0_BASE + BL1_XG2RAM0_OFFSET) |
| #define BL1_RO_LIMIT (XG2RAM0_BASE + 0x18000) |
| #define BL1_RW_BASE (BL1_RO_LIMIT) /* 0xf981_8000 */ |
| #define BL1_RW_SIZE (0x00080000) |
| #define BL1_RW_LIMIT (0xF9898000) |
| |
| /* |
| * Non-Secure BL1U specific defines. |
| */ |
| #define NS_BL1U_BASE (0xf9828000) |
| #define NS_BL1U_SIZE (0x00010000) |
| #define NS_BL1U_LIMIT (NS_BL1U_BASE + NS_BL1U_SIZE) |
| |
| /* |
| * BL2 specific defines. |
| * |
| * Both loader and BL2 region stay in SRAM. |
| * Loader is used to switch Hi6220 SoC from 32-bit to 64-bit mode. |
| * |
| * ++++++++++ 0xF980_0000 |
| * + loader + |
| * ++++++++++ 0xF980_1000 |
| * + BL2 + |
| * ++++++++++ 0xF983_0000 |
| */ |
| #define BL2_BASE (BL1_RO_BASE) /* 0xf980_1000 */ |
| #define BL2_LIMIT (0xF9830000) /* 0xf983_0000 */ |
| |
| /* |
| * SCP_BL2 specific defines. |
| * In HiKey, SCP_BL2 means MCU firmware. It's loaded into the temporary buffer |
| * at 0x0100_0000. Then BL2 will parse the sections and loaded them into |
| * predefined separated buffers. |
| */ |
| #define SCP_BL2_BASE (DDR_BASE + 0x01000000) |
| #define SCP_BL2_LIMIT (SCP_BL2_BASE + 0x00100000) |
| #define SCP_BL2_SIZE (SCP_BL2_LIMIT - SCP_BL2_BASE) |
| |
| /* |
| * BL31 specific defines. |
| */ |
| #define BL31_BASE (0xF9858000) /* 0xf985_8000 */ |
| #define BL31_LIMIT (0xF9898000) |
| |
| /* |
| * BL3-2 specific defines. |
| */ |
| |
| /* |
| * The TSP currently executes from TZC secured area of DRAM or SRAM. |
| */ |
| #define BL32_SRAM_BASE BL31_LIMIT |
| #define BL32_SRAM_LIMIT (BL31_LIMIT+0x80000) /* 512K */ |
| |
| #define BL32_DRAM_BASE DDR_SEC_BASE |
| #define BL32_DRAM_LIMIT (DDR_SEC_BASE+DDR_SEC_SIZE) |
| |
| #ifdef SPD_opteed |
| /* Load pageable part of OP-TEE at end of allocated DRAM space for BL32 */ |
| #define HIKEY_OPTEE_PAGEABLE_LOAD_BASE (BL32_DRAM_LIMIT - HIKEY_OPTEE_PAGEABLE_LOAD_SIZE) /* 0x3FC0_0000 */ |
| #define HIKEY_OPTEE_PAGEABLE_LOAD_SIZE 0x400000 /* 4MB */ |
| #endif |
| |
| #if (HIKEY_TSP_RAM_LOCATION_ID == HIKEY_DRAM_ID) |
| #define TSP_SEC_MEM_BASE BL32_DRAM_BASE |
| #define TSP_SEC_MEM_SIZE (BL32_DRAM_LIMIT - BL32_DRAM_BASE) |
| #define BL32_BASE BL32_DRAM_BASE |
| #define BL32_LIMIT BL32_DRAM_LIMIT |
| #elif (HIKEY_TSP_RAM_LOCATION_ID == HIKEY_SRAM_ID) |
| #define TSP_SEC_MEM_BASE BL32_SRAM_BASE |
| #define TSP_SEC_MEM_SIZE (BL32_SRAM_LIMIT - BL32_SRAM_BASE) |
| #define BL32_BASE BL32_SRAM_BASE |
| #define BL32_LIMIT BL32_SRAM_LIMIT |
| #else |
| #error "Currently unsupported HIKEY_TSP_LOCATION_ID value" |
| #endif |
| |
| /* BL32 is mandatory in AArch32 */ |
| #ifndef AARCH32 |
| #ifdef SPD_none |
| #undef BL32_BASE |
| #endif /* SPD_none */ |
| #endif |
| |
| #endif /* HIKEY_LAYOUT_H */ |